Operator`s manual

1-16
Parts and Their Functions (Control Panel/Touch Panel)
■ Control Panel
Reset
Clear
Energy Saver
Stop
Guide
Addiitional Functions
Interrupt
Start
Display Contrast
Number keys
Press to enter the desired copy quantity and
other numerical values such as ID numbers.
(See p. 1-22.)
Guide key
Press to display explanations
of modes. (See p. 2-12.)
Touch panel display
Reset key
Press to return the copier to the
Standard mode. (See p. 1-22.)
Display Contrast dial
Turn it to adjust the contrast of the
touch panel display. (See p. 1-23.)
Energy Saver key
If the copier will not be used for
a while, press to place the copier
in the Energy Saver mode.
Press it again to cancel the Energy
Saver mode. (See p. 2-13.)
Stop key
Press to stop the copier before
copying is completed.
(See p. 2-6.)
Additional Functions key
Press to select or cancel additional
functions. These functions enable
you to change the custom settings and
standard copy settings, or perform
other operations. (See p. 4-3.)
Interrupt key
Press to interrupt a continuous copying
job when you need to make priority copies.
(See p. 2-32.)
ID key
Press when you want to store new ID numbers in
memory and after you have entered your ID number.
(See pp. i-v.)
Power indicator
Lights green when the power is
turned ON.
Start key
Press to begin copying. (See p. 2-6.)
Clear key
Press to return the copy quantity to one,
or to clear an incorrect value entered when
setting a mode. (See p. 2-20.)