Operator`s manual

1-20
Messages which show the current copy settings
Touch Panel Display and Keying Operations
This section describes the different types of messages that appear in the touch panel
display. It also describes how to use the Control Panel keys together with the touch panel
display to perform settings.
The following types of messages appear in the touch panel display:
■ Messages which show the current copy settings
■ Messages which describe the procedure for setting a mode
■ Messages concerning copier self-diagnostics and inspection
■ Messages which provide an explanation of copier functions (Guide messages)
Touch Panel Display
Selected copying modes appear in the touch
panel display as follows:
In this example the Sorter and Two-sided
modes have been selected, and the Staple-sort
and 2→2-sided functions have been set.
Copy ratio
Messages which show
the current copy settings
Paper size
Copy quantity
Special features (modes selected using keys in
the Special Features section of the touch panel
display)
In this example, the Transparency Interleaving
mode and the One-sided mode have been
selected and set.
MEMO: ● If more than one mode is set, the one with the
highest display precedence is displayed first.
● When copying in the Transparency Interleaving
mode, select the One-sided mode beforehand.
(See “One-sided Mode” on p. 2-58.)