Operator`s manual

2-5
Basic Copying
Place your original on the platen glass.
MEMO: ● Place your original on the platen glass. The surface
that you want to copy must be placed face down.
Align the corner of the original with the V mark in the
upper-left corner of the platen.
2
V
ABC
Gently lower the RDF.
CAUTION:
● Close the RDF gently to avoid catching your
hand, as this may result in personal injury.
WARNING:
● Do not press down hard on the platen cover or
feeder when using the platen glass to copy thick
books. This may damage the platen glass and/or
result in personal injury.
NOTICE: ● When placing originals on the platen glass,
original size recognition is performed after the
RDF has been lowered. Be sure to lower the RDF
before copying.
3
Program the copy settings.
MEMO: ● Press the Number keys (
1
–
0
) to enter the
copy quantity. (See “Entering the Copy Quantity,”
on p. 2-20.)
● Press the [DARK] and [LIGHT] keys to adjust the
copy exposure. (See “Adjusting the Copy
Exposure,” on p. 2-21.)
● Press the [PAPER SELECT] key to select the copy
paper size. (See “Selecting the Copy Paper Size”
on p. 2-22.)
● Press the [REDUCE] and [ENLARGE] keys to
select a preset copy ratio. (See “Using Preset Copy
Ratios” on p. 2-40.)
4
Reset
Clear
Energy Saver
Stop
Guide
Additional Functions
Interrupt
Start
Display Contrast