Operator`s manual

2-6
Press the
Start
key.
When Job Duration Display is set to ON in
Additional Functions and the appropriate modes
are set, the remaining time necessary to
complete the copy job can be displayed.
CAUTION:
● Do not touch the Sorter bins while making copies as
this may result in personal injury.
MEMO: ● After copying begins, you cannot change the copy
quantity, paper size, copy ratio or other copy
settings.
● Job Duration Display can be set to ON or OFF in
Additional Functions. (See "Job Duration Display,"
on p.4-10.)
● When 1→2-sided copy or 2 ON 1/Two-sided copy,
requiring original change, is made by combining with
other mode, the remaining time necessary to complete
the copy job is respectively displayed for the 1st and
2nd copies. When the 1st copy is completed, the
message appears in the touch panel display. Then,
set the 2nd original, and press the
Start
key.
5
After the first original is copied, the message to
the right appears in the touch panel display.
Place the second original, then press the
Start
key.
■ Stopping before copying is completed
● If you want to stop the copier before copying is
completed, press the
Stop
key.
MEMO: ● Several sheets might be output even after the Stop
key has been pressed. Remove any paper remaining
in the duplexing unit by referring to the section on
“Clearing Paper Jams”, on pp. 6-2 to 6-32.
Clear
Stop
Start
Clear
E
nergy
S
aver
Stop
Di
sp
l
ay
C
on
t
ras
t