Operator`s manual

2-10
Using the SADF Tray of the RDF
Acceptable Originals
■ Original weight: 12-lb bond to 110-lb index (38 g/m
2
to 200 g/m
2
)
• 32-lb bond to 110-lb index paper (129 g/m
2
to 200 g/m
2
) may only be used when
making copies of LTR vertical originals.
■ Original size: STMT to 11" x 17" (STMT-size cannot be placed horizontally.)
NOTICE: ● Do not place the following types of originals in the RDF:
• Originals with tears or large binding holes
• Severely curled originals or originals with sharp folds
• Clipped or stapled originals
• Carbon-backed paper or other originals which might not feed smoothly
• Transparencies and other highly transparent originals
● Only 1-sided copy can be made with the SADF tray of the RDF.
Open the SADF tray.
1
Press the [1-SIDED] key.
2
Program the necessary copy settings.
MEMO: ● Press the Number keys (
1
-
0
) to enter the copy
quantity. (See “Entering the Copy Quantity,” on
p. 2-20)
● Press the [DARK] and [LIGHT] keys to adjust the
copy exposure. (See “Adjusting the Copy
Exposure,” on p. 2-21.)
● Press the [PAPER SELECT] key to select the copy
paper size. (See “Selecting the Copy Paper Size, ”
on p. 2-22.)
● Press the [REDUCE] and [ENLARGE] keys to select
a preset copy ratio. (See “Using Preset Copy
Ratios,” on p. 2-40.)
3
Reset
Clear
Energy Saver
Stop
Guide
Additional Functions
Interrupt
Start
Display Contrast