Operator`s manual

2-13
Basic Copying
Press the [TRANSP. INTERLVNG] key and the
Guide display at the right will appear. Press the
[DONE] key and the display returns to the initial
Special Features screen.
Energy Saver
Stop
Display Contrast
Energy Saver mode
If you will not be using the copier for a while,
you can press the
Energy Saver
key to put the copier in
the Energy Saver mode. In the Energy Saver
mode, only the
Energy Saver
key and Power indicator are
lit, and the temperature of the fixing unit is
lowered to reduce energy consumption.
To begin making copies again, press the
Energy Saver
key again. The standard copy settings (see
p. 2-2) will be in effect.
REQUEST:
● If the copier will not be used for an extended period
of time, such as at night, turn the power OFF.
MEMO: ● You can select an Eenergy Saver setting of –10%,
–25%, or –50% for the Energy Saver mode. The
amount of time that it takes for the copier to return
to the Standard mode after the Energy Saver mode
has been canceled will vary depending on the
Energy Saver setting that has been set. In the
Energy Saver mode, there is also a setting so you
can return directly to the Standard mode without
having to wait.
(See “Additional Functions/Energy Saver Adjustment,”
on p. 4-13.)