Operator`s manual

2-14
Auto Energy Saver function
If the copier is not operated for a period of
approximately 15 minutes (default), the copier
automatically enters the Low-Power mode.
To begin making copies again, press the
Energy Saver
key.
MEMO: ● The Low-Power Mode Time can be set from 10
minutes to 4 hours: in 5-minutes increments from 10
minutes to 20 minutes, in 10-minute increments from
30 minutes to 50 minutes, in 30-minute increments
from 1 hour to 2 hours, and hourly increments from 3
hours to 4 hours. (See "Low-Power Mode Time," on
p.4-16)
If the copier is not operated for a period of
approximately one hour, the power switch
automatically moves to the OFF position, and
the main power is cut. (Auto Power-off)
To turn the power back ON, press the power
switch to the ON position.
MEMO: ● The Auto Power-Off Mode Time can be set from 10
minutes to 4 hours: in 5-minutes increments from 10
minutes to 20 minutes, in 10-minute increments from
30 minutes to 50 minutes, in 30-minute increments
from 1 hour to 2 hours, and hourly increments from 3
hours to 4 hours. (See "Auto Power-Off Time," on
p.4-17)