Operator`s manual

2-17
Basic Copying
Gently lower the RDF.
REQUEST:
● Do not press down hard on the RDF when using
the platen glass to copy thick books, since this
may damage the platen glass.
NOTICE: ● When placing originals on the platen glass,
original size recognition is performed after the
RDF has been lowered. Be sure to lower the RDF
before copying.
ABC
V
You should use the platen glass when copying books, originals on heavy paper, and
transparencies, etc.
Placing an Original on the Platen Glass
1
Lift the RDF.
2
Place your original on the platen glass.
The surface that you want to copy must be
placed face down. Align the corner of the
original with the V mark in the upper-left corner
of the platen glass.
MEMO: ● Place books and other bound originals on the platen
glass in the same way.
● When enlarging a LTR or STMT-size original to
LGL or 11" x 17"-size, place the original horizontally
on the platen glass and align it with the LTRR or
STMTR marks.
3