Operator`s manual

2-21
Basic Copying
To select Automatic Exposure Control, press the
[A] key. The [A] key becomes highlighted and
the copier automatically adjusts the copy
exposure to the most appropriate level for the
original.
MEMO: ● Press the [A] key again to return to Manual
Exposure Control. Pressing either the [LIGHT] or
[DARK] key will also return the copier to Manual
Exposure Control.
● If the original is a transparency, you may not be able
to use Automatic Exposure Control. If so, adjust the
copy exposure using Manual Exposure Control.
● Manual Exposure Control cannot be changed to
Automatic Exposure during copying.
The following two methods are available for adjusting the copy exposure:
■ Manual Exposure Control
You can manually adjust the copy exposure to the desired level using the Exposure
([LIGHT] [DARK]) keys.
■ Automatic Exposure Control
The copier automatically adjusts the copy exposure to the most appropriate level for the
original.
Adjusting the Copy Exposure
Manual Exposure (Standard Copy Setting)
Press the [LIGHT] [DARK] keys to adjust the
copy exposure.
MEMO: ● Move the indicator above the [LIGHT] [A] [DARK]
keys to the left to make the exposure lighter or to
the right to make the exposure darker.
● If you press the [LIGHT] or [DARK] keys while
Automatic Exposure Control is in effect (i.e., the [A]
key is highlighted), the [A] key returns to normal
and Manual Exposure Control goes into effect.
Automatic Exposure