Operator`s manual

2-23

Basic Copying

Proceed to copy in the usual way.

(See “Making Copies,” on p. 2-4.)

MEMO:

● When using Auto Paper Selection, the selected

paper size is indicated as follows:

• If you place your original on the platen

glass, the paper size appears in the touch panel

display after the platen glass cover is lowered.

• If you place your originals in the RDF, the paper

size appears in the touch panel display after you

press the

Start

key.

• If you place your original in the SADF tray, the

paper size appears in the touch panel display

when the original is fed onto the platen glass.

Since Auto Paper Selection is the standard copy

setting, normally no operation is necessary to

set this feature.

If a paper size is shown in the center of the

touch panel display, press the [PAPER

SELECT] key to select [AUTO].