Operator`s manual

2-48
Place your originals.
For instructions on how to place an original on
the platen glass, see p. 2-17.
For instructions on how to place originals in
the RDF, see p. 2-18.
For instructions on how to place an original in
the SADF tray of the RDF, see p. 2-19.
Auto Zoom (Automatically Selects the Copy Ratio Based on the
Original and Copy Paper Sizes)
In this mode, the copier automatically selects the appropriate copy ratio, based on the size of the
originals and the selected copy paper. To use this mode, your originals must conform to a
standard paper size. The paper sizes that can be used with Auto Zoom are as follows:
• For an original placed on the platen glass: LTR, LTRR, LGL and 11"x17"
• For originals placed in the RDF: STMT, LTR, LTRR, LGL and 11"x17"
• For an original placed in the SADF tray of the RDF: STMT, LTR, LTRR, LGL and 11"x17"
MEMO:
You cannot copy highly transparent originals, such as transparencies, in the Auto Zoom mode.
Use either the Zoom mode or preset copy ratios with such originals.
You cannot use the Auto Zoom mode with Automatic Paper Selection (see p. 2-22).
To use the Auto Zoom mode, your originals must conform to a standard paper size.
Original (LTRR)
Copy (11" x 17")
Auto Zoom mode
selected
Press the [PAPER SELECT] key.
1
A
B
C