Operator`s manual

2-52
Proceed to copy in the usual manner. (See
"Making Copies," on p.2-4.)
■ If you placed your original on the platen glass
After the first original is copied, the message to the
right appears in the touch panel display.
Place the second original, then press the
Start
key.
MEMO: ● To cancel the setting, press the [1→2-SIDED] key
and then the [C] key.
● You can also cancel the mode by pressing the
Reset
key.
(The copier returns to the Standard mode.)
■ If you placed your original in the RDF
The copier automatically counts the number of
originals before copying beings. If you want to
cancel the Auto Count function, follow the
directions described below to make the settings.
MEMO: ● If there are an odd number of originals, the back of
the last page is left blank. (The copier’s counter
does not count the blank page as a copy.)
2
Press the [1→2-SIDED] key.
Press the [CANCEL COUNT] key.
Specify the number of originals by pressing
[EVEN NUMBER] or [ODD NUMBER], then
press the [OK] key.
MEMO: ● If you specify the number of originals, automatic
original counting is canceled.
3