Operator`s manual

2-58
One-sided Mode
(To Make One-sided Copies of One-sided Originals)
The 1→2-sided mode is set as the standard mode in this copier. Select the One-sided mode
when making One-sided copies from One-sided originals.
NOTICE: ● When copying in the Transparency Interleaving mode, always set the copier to the One-sided
mode.
Press the [ONE-SIDED] key.
1
Proceed to copy in the usual manner.
(See “Making Copies,” on p. 2-4.)
MEMO: ● To cancel the setting, press the
Reset
key.
(The copier returns to the Standard mode.)