Optura Pi Instruction Manual

Additional
Information
120
E
Recording reminder
When you start recording, the camera
counts from 0SEC to 10SEC. Shots
which are shorter than ten seconds may
be difficult to edit later. On the other
hand, if you are not planning to edit the
recording, remember that a shot which
does not contain action should
generally last no longer than ten
seconds.
Time Code
This records counter information,
including hour, minute, second, and
frame number on a special data code
area on the tape itself. It is reset
automatically when a new tape is
loaded. In camera mode, the frame
number doesn’t appear in the display.
0sec
10sec
0:12:34:56
AUDIO IN
MIC. IN
DV IN
The wind screen is
turned on ( 65).
Volume level ( 26)
Audio output ( 98)
Mix balance ( 98)
Audio/visual insert
( 92)
Audio dubbing
( 95)
Audio input ( 96)
Microphone input
( 96)
DV input ( 88)
Condensation warning
( 108)
ST–1 ST–2
A/V INSERT
AUDIO DUB.
WSON
+–
VOLUME
OFF
VOLUME
STEREO1
STEREO2
MIX/FIXED
MIX/VARI
#5_OPTURA Pi_E(100-126) 1/25/00 13:43 Page 120 (1,1)