Optura Pi Instruction Manual

30
E
Quick Overview
Connections for Playback on a TV Screen
You can connect the camera to a TV or VCR in order to play back your
recordings. You will need to attach a power source to the camera ( 11).
Power off all devices before starting the connections.
• Use the S-150 S-video Cable to connect the S-video terminals. Use the STV-
250N Stereo Video Cable to connect the AUDIO terminals. Connect the white
plug to the white AUDIO terminal L (left). Connect the red plug to the red
AUDIO terminal R (right). Do not connect the yellow plug.
• Set the TV/VIDEO selector on the television to VIDEO.
• If you are connecting the camera to a VCR, set the input selector on the VCR to
LINE.
VIDEO
S(S1)-VIDEO
INPUT
AUDIO
L
R
S-150 S-video Cable
STV-250N Stereo Video Cable
A/V IN/OUT
IN/OUT
MIC
DC IN
9.5V
S
If your TV (or VCR) has an S (S1) -video input terminal
See your TV or VCR instruction manual for further details.
For higher picture quality, we recommend playing back recordings on a TV with
an S (S1) terminal. If you connect the camera to a TV with an S1 terminal or the
Video ID-1 system, recordings made in the 16:9 mode for wide screen TVs will
automatically play back in wide screen mode on the TV screen.
#2_OPTURA Pi_E(07-33) 1/25/00 13:41 Page 30 (1,1)