Optura Pi Instruction Manual

81
E
Editing
Using the Dubbing Function for the First Time
When you use the dubbing function for the first time, or with a different VCR, you
should set your camcorder to send the correct remote control signals to your VCR.
The camera will not forget this setting unless you change it. Do not alter it again
unless you change VCRs.
REC.SET UP SEL.SETSET
MENUCLOSE
DUB MODE
RECORDER••••
[
1
]
–
[
A
]
CUT-IN ADJ.•• 0:00
CUT-OUT ADJ.• 0:00
REC.SET UP SEL.SETSET
MENUCLOSE
DUB MODE
RECORDER••••
[
1
]
–
[
A
]
CUT-IN ADJ.•• 0:00
CUT-OUT ADJ.• 0:00
Preparations & setting up
1. Make sure that the camera and VCR are set up as in “Preparing
for dubbing,” ( 79) and “Setting the camera to control your
VCR,” ( 80).
–+
VCR MENU SEL.SETSET
MENUCLOSE
DUB MODE
REC.SET UP
WL.REMOTE••• 1
REC MODE••••SP
DATA CODE•••DATE/TIME
D/TIME SEL.•DATE & TIME
BRIGHTNESS••
DISPLAYS••••ON
2. Open the VCR menu and
select \REC.SET UP.
• This takes you to the REC.SET
UP menu.
• It is easiest to view the menu on
the TV screen.
3. Point the arrow to
RECORDER and push the
selector dial.
• You are now unable to use the
wireless controller (B appears
in the display).
#4_OPTURA Pi_E(79-99) 1/25/00 13:42 Page 81 (1,1)