User's Manual

Advanced Guide
>
Troubleshooting > The Printer Cannot Be Powered On
U303
The Printer Cannot Be Powered On
Check 1: Press the
ON
button.
Check 2: Make sure that the power plug is securely plugged into the
Power Cord Connector of the printer, then turn it back on.
Check 3: Unplug the printer from the power supply, then plug the
printer back in and turn the printer back on after leaving it for at least 3
minutes.
If the problem is not resolved, contact the service center.
Page top
Page 383 of 468 pages
The Printer Cannot Be Powered On