Operation Manual

FINE Cartridge Holder Does Not Move to the Position for Replacing
Check1
Is the ON lamp off?
Check if the ON lamp is lit.
The FINE cartridge holder will not move unless the power is on. If the ON lamp is off, close the cover and turn
the machine on.
Check2
Is the Alarm lamp flashing?
Close the cover, confirm the number of times the Alarm lamp is flashing, take the appropriate action to resolve
the error, and then reopen it. For details on how to resolve the error, see
If an Error Occurs.
Check3
Has the cover been left open for 10 minutes or longer?
If the cover is left open for more than 10 minutes, the FINE cartridge holder moves to the position to protect it to
prevent the print head from drying out. Close and reopen the cover to return the FINE cartridge holder to the
position for replacing.
Check4
Has the machine been printing continuously for a long period?
If the machine has been printing continuously for a long time, the FINE cartridge holder may not move to the
position for replacing since the print head may overheat.
Note
• Do not open the cover while printing is in progress; otherwise, an error occurs.
490