Operation Manual

If remaining ink level notification function is enabled

Resetting the remaining ink level count when a remaining ink error occurs

If the remaining ink level notification function is enabled, the

icon flashes on the LCD when ink runs

low. This function is enabled by default. Refill all four ink tanks until full and then reset the remaining ink

level count.

• To continue enabling the remaining ink level notification function

Press the Black button or the Color button for more than 5 seconds.

The icon turns off and the remaining ink level count is reset.

• To disable the remaining ink level notification function

Press the Black button or the Color button and release it immediately.

The icon turns off and the remaining ink level notification function is disabled.

Resetting the remaining ink level count when a remaining ink error has not

occurred

If you refill ink tanks when remaining ink level notification function is enabled and when the remaining ink

error has not occurred, refill all four ink tanks until full and then reset the remaining ink level count.

• To continue enabling the remaining ink level notification function

1. Press the Setup button.

The (Setup) icon and "1" appear on the LCD.

2. Press the + button until "14" appears on the LCD.

3. Press the Black button or the Color button.

The remaining ink level count is reset.

• To disable the remaining ink level notification function

1. Press the Setup button.

The (Setup) icon and "1" appear on the LCD.

2. Press the + button until "15" appears on the LCD.

3. Press the Black button.

The remaining ink level notification function is disabled.

Important

• If the remaining ink level notification function is disabled, visually inspect the remaining ink and refill

the ink tanks as necessary. Continuing printing with ink below the lower limit line of an ink tank may

prevent satisfactory print quality or may cause malfunction or damage to the printer.

Note

• You can also set the remaining ink level notification function or reset the remaining ink level count

from your computer.