iP110 series Online Manual Read Me First Useful Functions Available on the Machine Overview of the Printer Printing Troubleshooting English
Contents Read Me First. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Symbols Used in This Document. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 Trademarks and Licenses. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 Search Tips. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 Notes on Operation Explanations. . . . . . . . .
Changing Printer Setting to Use Wireless LAN via Wireless LAN Router. . . . . . . . . . . . . 84 Overview of the Printer. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85 Safety Guide. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 86 Safety Precautions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Printing the Nozzle Check Pattern. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 136 Examining the Nozzle Check Pattern. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 137 Cleaning the Print Head. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 138 Aligning the Print Head. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Changing and Confirming Network Settings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 185 IJ Network Tool. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 186 Canon IJ Network Tool Screen. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 187 Canon IJ Network Tool Menus. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Setting the Number of Copies and Printing Order. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 242 Setting the Stapling Margin. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 244 Execute Borderless Printing. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 245 Scaling the Printing to Fit the Paper Size. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Before Installing the Printer Driver. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 297 Installing the Printer Driver. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 298 Printing from a Digital Camera. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 299 Printing Photographs Directly from a PictBridge (Wireless LAN) Compliant Device. . . . . . . . . . . . . . .
Colors Are Uneven or Streaked. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 344 Ink Is Not Ejected. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 346 Problems with the Printer. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 347 The Printer Cannot Be Powered On. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1700. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 386 1701. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 387 1810. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 388 2100. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
6946. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 420 6A00. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 421 A000. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 422 A100. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Read Me First Notes on Online Manual Usage How to Print Notes on Online Manual Usage • Reproduction, diversion or copying of any text, photo or image published in the Online Manual (hereinafter referred to as "this guide"), in whole or in part, is prohibited. • In principle, Canon shall change or delete the contents of this guide without prior notice to customers. In addition, Canon may suspend or stop the disclosure of this guide due to unavoidable reasons.
Symbols Used in This Document Warning Instructions that, if ignored, could result in death or serious personal injury caused by incorrect operation of the equipment. These must be observed for safe operation. Caution Instructions that, if ignored, could result in personal injury or material damage caused by incorrect operation of the equipment. These must be observed for safe operation. Important Instructions including important information.
Trademarks and Licenses • Microsoft is a registered trademark of Microsoft Corporation. • Windows is a trademark or registered trademark of Microsoft Corporation in the U.S. and/or other countries. • Windows Vista is a trademark or registered trademark of Microsoft Corporation in the U.S. and/or other countries. • Internet Explorer is a trademark or registered trademark of Microsoft Corporation in the U.S. and/or other countries.
1. Definitions. "License" shall mean the terms and conditions for use, reproduction, and distribution as defined by Sections 1 through 9 of this document. "Licensor" shall mean the copyright owner or entity authorized by the copyright owner that is granting the License. "Legal Entity" shall mean the union of the acting entity and all other entities that control, are controlled by, or are under common control with that entity.
their Contribution(s) with the Work to which such Contribution(s) was submitted. If You institute patent litigation against any entity (including a cross-claim or counterclaim in a lawsuit) alleging that the Work or a Contribution incorporated within the Work constitutes direct or contributory patent infringement, then any patent licenses granted to You under this License for that Work shall terminate as of the date such litigation is filed. 4. Redistribution.
goodwill, work stoppage, computer failure or malfunction, or any and all other commercial damages or losses), even if such Contributor has been advised of the possibility of such damages. 9. Accepting Warranty or Additional Liability. While redistributing the Work or Derivative Works thereof, You may choose to offer, and charge a fee for, acceptance of support, warranty, indemnity, or other liability obligations and/or rights consistent with this License.
Enter keywords in the search window and click (Search). You can search for target pages in this guide. Search Tips You can search for target pages by entering keywords in the search window. Note • The displayed screen may vary. • When searching from this page or the "Home" page without entering your product's model name or your application's name, all products supported by this guide will be considered for the search.
Note • The displayed screen varies depending on your product. • Searching for Application Functions Enter your application's name and a keyword for the function you want to learn about Example: When you want to learn how to print collages with My Image Garden Enter "My Image Garden collage" in the search window and perform a search • Searching for Reference Pages Enter your model name and a reference page title* * You can find reference pages more easily by entering the function name as well.
Notes on Operation Explanations In this guide, most of the operations are described based on the windows displayed when OS X Mavericks v10.9 is used.
Useful Functions Available on the Machine Connect Wirelessly with Ease in "Access Point Mode" Print Photos Easily Using My Image Garden Connection Methods Available on the Printer Notice for Web Service Printing Use PIXMA Cloud Link Printing with Google Cloud Print Printing from AirPrint Compliant Device Android Print Checking Printer Information Print Easily from a Smartphone or Tablet with PIXMA Printing Solutions Printing with Windows RT 20
Connect Wirelessly with Ease in "Access Point Mode" The printer supports "access point mode" in which you can connect to the printer wirelessly from a computer or smartphone even in an environment without an access point or wireless LAN router. Switch to "access point mode" with simple steps to enjoy printing wirelessly. When you use the printer with the access point mode, be sure to specify the access point name of the printer and the security setting in advance.
Print Photos Easily Using My Image Garden Organize Images Easily In My Image Garden, you can register the names of people and events to photos. You can organize photos easily as you can display them not only by folder but also by calendar, event, and person. This also allows you to find the target photos easily when you search for them later on.
Place Photos Automatically Delightful items are created easily as the selected photos are placed automatically according to the theme. Other Various Functions My Image Garden has many other useful functions. Refer to "What You Can Do with My Image Garden" for details.
Connection Methods Available on the Printer The following connection methods are available on the printer. Wireless Connection With an access point Without an access point USB Connection Wireless Connection There are two methods for connecting the printer to your device (such as a smartphone). One method is to connect using an access point, and the other method is to connect without using an access point. The two connection methods cannot be used at the same time.
Connection without Using an Access Point • Connect the printer and a device without using an access point. Connect a device and the printer directly using the printer's access point mode function. • When establishing a connection in access point mode, Internet connection may become unavailable. In that case, web services for the printer cannot be used.
Connection without Using an Access Point (Windows XP) Restrictions (Appears in a new window) 1. Hold down the Wi-Fi button (A) on the printer until the POWER lamp (B) flashes 3 times, then release the Wi-Fi button after the third flash. The printer's access point mode will be enabled. 2. Check the SSID and network key of your printer. Print the LAN setting information and check the SSID and password (network key) fields.
5. Enter the network key, then click Connect. 6. When connection is complete, click Back until the screen below appears. Proceed with the setup.
Restrictions When connecting another device while a device (such as a smartphone) is already connected to the printer, connect it using the same connection method as the connected device. If you connect using a different connection method, the connection to the device in use will be disabled. Connection Using a Wired Network cannot be performed on printers that do not support a wired connection.
• When connecting a device and the printer in access point mode, Internet connection may become unavailable. In that case, web services for the printer cannot be used. • In access point mode, you can connect up to five devices at the same time. If you try to connect a sixth device while five devices are already connected, an error will appear. If an error appears, disconnect a device that does not use the printer, then configure settings again.
Notice for Web Service Printing When Using Web Service • Canon does not guarantee the continuity and reliability of the web services provided, the availability of site access, or permission to download the materials. • Canon may at any time update, change, or delete the information provided through the web service, or may suspend or discontinue the service without prior notice. Canon shall not be held responsible for any damages resulting from such actions.
Copyrights and Rights of Publicity When printing from the photo sharing site: • Observe the conditions of use of the photo sharing site when you use photos on the site. • It is unlawful to reproduce or edit the copyrighted work of another person without permission from the copyright holder, except for personal use, use within the home, or other use within the limited scope as defined by the copyright. Additionally, reproducing or editing photographs of people may infringe on Rights of Publicity.
Use PIXMA Cloud Link By using PIXMA Cloud Link, you can connect your printer to a cloud service, such as CANON iMAGE GATEWAY, Evernote, or Twitter, and use the following functions from your printer or from the web browser on your smartphone, tablet, or computer. • Print images from a photo-sharing service • Print documents from a data management service • Use Twitter to report the printer status, such as no paper or low ink levels.
Using PIXMA Cloud Link from Your Smartphone, Tablet, or Computer Before Using Canon Inkjet Cloud Printing Center Preparations Before Using Canon Inkjet Cloud Printing Center Using Canon Inkjet Cloud Printing Center Adding a Printer Troubleshooting Canon Inkjet Cloud Printing Center 33
Before Using Canon Inkjet Cloud Printing Center Canon Inkjet Cloud Printing Center is a service that links with the cloud function of the printer and allows you to perform operations such as registering and managing apps from your smartphone or tablet device, and checking the print status, print error, and ink status of the printer. You can also print app photos and documents from your smartphone or tablet.
Requirements for Canon Inkjet Cloud Printing Center operation Computer CPU x86 or x64 1.
• In an in-house network environment, the 5222 port must be released. For confirmation instructions, contact the network administrator.
Preparations Before Using Canon Inkjet Cloud Printing Center To use the Canon Inkjet Cloud Printing Center, you need to follow the steps described below and register the user information. 1. Check that the printer is connected to the Internet Important • To use this function, you must connect this printer to the Internet. 2. Remote UI startup 3. Select IJ Cloud Printing Center setup -> Register with this service 4. Follow the instructions displayed in the window, and run the authentication 5.
Important • There are character restrictions for the e-mail address, as shown below. • You can use up to 255 alphanumeric characters consisting of single-byte characters and symbols (!$'*/^_{}|~.-@). • Multibyte characters cannot be used. You will get an error if the e-mail address you enter contains a character that cannot be used.
9. In the user information entry screen, enter your Password, and select Next Enter your password for logging in to the Canon Inkjet Cloud Printing Center.
Important • There are character restrictions for the Password, as shown below. • The password needs to be between 8 and 32 characters long, using single-byte alphanumeric characters and symbols (!"#$%&'()*+,-./:;<=>?@[\]^_`{|}~). (Alphabets are case-sensitive) 10. Enter the User name Enter the name that identifies the user.
11. Specify the Time zone setting, and select Next Select your region on the list. If you cannot find your region on the list, select the one closest to your region. Apply daylight saving time This appears only when there is a daylight saving time in the Time zone that you selected. Select whether or not to apply the daylight saving time. 12. Enter the Security code and select Done Enter the code for authenticating the user.
The registration is complete. A registration completion message is displayed. When you select the OK button in the message, the login screen is displayed. Enter the registered e-mail address and password, and log in to the Canon Inkjet Cloud Printing Center.
Canon Inkjet Cloud Printing Center window This section describes the Canon Inkjet Cloud Printing Center screens that are displayed on your smartphone, tablet device, or computer. Description of the Login screen Description of the Main screen Description of the Login screen This section provides the description of the Login screen of Canon Inkjet Cloud Printing Center. Important • You have 5 tries to enter your password. If you fail, you will not be able to log in for about the next hour.
Create new account A new registration will be added to the Canon Inkjet Cloud Printing Center. System requirements This displays the system requirements for the Canon Inkjet Cloud Printing Center. Help/legal notices (smartphone and tablet devices only) The description of the Canon Inkjet Cloud Printing Center screen and various reminders are displayed. Software license info The licensing information of Canon Inkjet Cloud Printing Center is displayed.
(3) Right context menu (4) Display area (5) Menu area (1) Left context menu When you select , the Mng. printer screen of the Manage users screen appears. For general users, the Select printer screen appears. Mng. printer screen (Select printer screen) From the Mng. printer screen (Select printer screen), you can check*and update* printer information registered to the Canon Inkjet Cloud Printing Center, change printer names, delete printers, add printers, and copy apps.
This displays the date and time the printer information was last updated. refreshes the information. • Copy apps Select this to copy apps added in the selected printer to another printer. When you select , the screen shown below appears. Set the Destination printer and the Source printer. Then select OK. • Change the printer name When you select , a screen to change the printer name appears. Follow the instructions on the screen to change the name.
Manage users screen From the Manage users screen, you can check user information registered to the Canon Inkjet Cloud Printing Center, delete users, add users, and change the Administrator and Standard user settings. • User deletion Select the check box of the user to be deleted, and select Delete. However, you cannot delete yourself. To delete yourself, cancel your membership from the user information screen. • Adding a user Select Add user. The user registration screen appears.
• Sort This displays the screen to sort registered apps. You can use the buttons to change the display order of apps. When you finish sorting, press the Done button to confirm the order. • Latest notices* This displays the latest notices. The • symbol indicates that there is a new unread notice. User information* This displays the User information screen. You can change the registered e-mail address, password, language, time zone, and other settings.
• Help/legal notices* The description of the Canon Inkjet Cloud Printing Center screen and various reminders are displayed. • Log out* This opens the Log out screen of the Canon Inkjet Cloud Printing Center. (4) Display area The display changes based on the menu you select. (5) Menu area The following 4 menu buttons are displayed: • Apps* This displays the list of registered apps in the Display area. • Config This displays the Register apps screen in the Display area.
On the Search apps screen, the apps that you can register by using the Canon Inkjet Cloud Printing Center are displayed by category. ◦ When you select When you select , the details of the app are displayed. / , you can choose to register or unregister the app. Note • Description of displayed icons : Cannot be used because it is not yet released, not available in your region, or does not support your model. : Can be used with genuine Canon ink.
• Properties* This screen displays the status of the printer that is currently selected. You can check how much ink is remaining or details about an error that occurred. You can also access the ink purchasing site and the Online Manual. Important • The Properties displayed may differ from the actual status at the display time, depending on the printer status. • Manage jobs* This screen displays the print status and the print history.
(8) Display area (1) Mng. printer (Select printer) button When you select the Mng. printer (Select printer) button, the Mng. printer (Select printer) screen appears. From the Mng. printer screen (Select printer screen), you can check*and update* printer information registered to the Canon Inkjet Cloud Printing Center, change printer names, delete printers, add printers, and copy apps. • Check the printer information* The registered printer name is displayed. indicates the currently selected printer.
• Change the printer name When you select , a screen to change the printer name appears. Follow the instructions on the screen to change the name. Note • The printer name entry has the following character limitation: • Up to 128 characters • Delete printers , the printer is deleted from the Canon Inkjet Cloud Printing Center. When you select When transferring the ownership of the printer, select Clear the information saved on the printer.
From the Manage users screen, you can check user information registered to the Canon Inkjet Cloud Printing Center, delete users, add users, and change the Administrator and Standard user settings. • User deletion Select the check box of the user to be deleted, and select Delete. However, you cannot delete yourself. To delete yourself, cancel your membership from the user information screen. • Adding a user Select Add user. The user registration screen appears.
When you finish sorting, press the Set sort order button and confirm the order. • Config This displays the Register apps screen in the Display area. The display can be toggled between Registered and Search apps. The Registered screen lists registered apps. You can check the information of these apps or deregister them. On the Search apps screen, the apps that you can register by using the Canon Inkjet Cloud Printing Center are displayed by category.
not support your model. : Can be used with genuine Canon ink. • Properties* This screen displays the status of the printer that is currently selected. You can check how much ink is remaining or details about an error that occurred. You can also access the ink purchasing site and the Online Manual. Important • The Properties displayed may differ from the actual status at the display time, depending on the printer status. • Manage jobs* This screen displays the print status and the print history.
(8) Display area The display changes based on the menu you select.
Using Canon Inkjet Cloud Printing Center When the user registration is completed, you can log in to the Canon Inkjet Cloud Printing Center and use the service. 1. From your PC, smartphone, or tablet, access the service login URL (http://cs.c-ij.com/) 2. On the Login screen, enter the E-mail address and Password, and then select Log in Important • The e-mail address and password are case-sensitive. Make sure the case is correct.
Important • • • • The available functions differ depending on the app. The printing procedure differs depending on the app. You need to get the account and register photo and other data beforehand. The following file formats can be printed: jpg, jpeg, pdf, docx, doc, xlsx, xls, pptx, ppt, and rtf. The file formats that can be printed differ depending on the app. • Before you print, check that printer is on and is connected to the network. Then start.
4. In the displayed image list, select the image that you want to print, and then select Next 5.
6. A print job completion message appears, and printing starts To continue printing, select Continue, and perform the operation from Step 3. To end the printing, select Apps. The screen returns to the apps list screen. Important • If a print job is not printed within 24 hours after the print job is issued, the print job will expire and cannot be printed. • With premium apps that limit the number of print jobs, print jobs that expire and cannot be printed are also included in the print count.
Adding a Printer With one account, you can use the Canon Inkjet Cloud Printing Center services on multiple printers. The procedure for adding a printer is as follows: 1. Check that the printer is connected to the Internet Important • To use this function, you must connect this printer to the Internet. 2. Remote UI startup 3. Select IJ Cloud Printing Center setup -> Register with this service 4. Follow the instructions displayed in the window, and run the authentication 5.
Troubleshooting Canon Inkjet Cloud Printing Center If an app cannot be installed If the registered app is not in the Apps list If the information is not updated when you press the Update button If you do not receive the registration e-mail If you cannot print Printing starts on its own even if you do not do anything If you are unable to log in correctly even after entering the correct password in iOS or Mac If an app cannot be installed Check the country or region where the printer was purchased.
If the problem is not resolved, use the printer driver from your computer to perform the print job and check whether the data can be printed normally on the printer. If you still cannot print, see the troubleshooting page for your model on the Home of the Online Manual. Note • With a wireless LAN connection, after the printer is turned on, it may take several minutes before communication is possible. Check that your printer is connected to the wireless network, and wait a while before you start printing.
Printing with Google Cloud Print The printer is compatible with Google Cloud Print™ (Google Cloud Print is a service provided by Google Inc.). By using Google Cloud Print, you can print from anywhere with applications or services supporting Google Cloud Print. 1. Preparations for Printing with Google Cloud Print 2.
Preparations for Printing with Google Cloud Print To print with Google Cloud Print, you need to get Google account and register the printer with Google Cloud Print in advance. Getting Google Account If you already have Google account, register the printer. Registering the Printer with Google Cloud Print Getting Google Account First, get your Google account in order to register the printer with Google Cloud Print.
• After you update the firmware, you must re-register the printer even if it was already registered. • When you register a printer, the printer must be connected to the LAN and the LAN environment must be connected to the Internet. Note that the customer is responsible for all Internet connection fees. • When the printer owner changes, delete the printer registration from Google Cloud Print. Registration from Computer 1. Start the Google Chrome browser on your computer.
Deleting the Printer from Google Cloud Print To change the printer owner or to re-register the printer, first delete the printer from Google Cloud Print. If the firmware version is Ver. 2.010 or later, the printer can be deleted from Google Chrome on your computer. Deletion from Computer For earlier versions, or when using a smartphone or tablet, delete the information directly from the printer. Deletion from the Printer Deletion from Computer 1. Start the Google Chrome browser on your computer.
Printing from Computer or Smartphone with Google Cloud Print When you send print data with Google Cloud Print, the printer receives the print data and prints it automatically if the printer is turned on. When printing from a smartphone, tablet, computer, or other external device by using Google Cloud Print, load paper into the printer in advance. 1. Make sure that the printer is turned on Note • If you want to send the print data from an outside location, turn on the printer in advance. 2.
• If you select plain paper as media type or if you select B5/A5-size as paper size, the print data is printed with border even when you select the borderless print setting. • The print results may differ from the print image depending on the print data. • Depending on the device sending the print data, you may not select the print settings when sending the print data with Google Cloud Print.
Printing from AirPrint Compliant Device This document explains how to use AirPrint to print wirelessly from your iPad, iPhone and iPod touch to a Canon printer. AirPrint enables you to print photos, email, Web pages and documents from your Apple device directly to your printer without installing a driver. Checking Your Environment First, check your environment.
3. From the menu options, tap Print. 4. From Printer Options, select the model that you are using. Important • Because some app does not support AirPrint, Printer Options may not be displayed. If an app does not let you use printer options, you cannot print from that app. Note • The Printer Options differ depending on the app and model you are using.
5. When printing a file type that has multiple pages, such as a PDF file, click Range and then click All Pages or select the range of pages to be printed. 6. For 1 Copy, click + or - to set the number of required copies. 7. For Duplex Printing, click On to enable duplex printing or click Off to disable the function. 8. Tap the Print. When you execute printing, the printer prints according to the specified settings.
Deleting a Print Job To delete a print job with AirPrint, use one of the following two methods: • From the printer: If your printer has a LCD monitor, use the operation panel to cancel the print job. If you printer does not have a LCD monitor, press the Stop button on the printer to cancel the print job. • From an Apple device: Press the Home button on the Apple device twice to set the Multitasking mode, and then swipe to the right. Tap the Print Center icon to display a Print Summary.
Note • After you turn on the printer, it may take few minutes before the printer can communicate through a wireless LAN connection. Confirm that the printer is connected to the wireless LAN, and then try printing. • If Bonjour on the printer is disabled, AirPrint cannot be used. Check the LAN settings on the printer, and enable Bonjour. Note • The windows used in the explanations may differ from those displayed by your Apple product or app.
Android Print Use the Canon printing plugin Canon Print Service is a printing plug-in for Android 4.4 available for free on Google Play. Installing and activating the plug-in enables your Android smartphone or tablet to print wirelessly to a Canon printer. Printing via Mopria You can print wirelessly to a Canon printer from a Mopria compatible Android smartphone or tablet. See the Mopria homepage (http://www.mopria.org) for details including supported devices.
Checking Printer Information You can use your smartphone, tablet, or computer to check the Printer status and execute utility functions from apps such as Canon Inkjet Print Utility and PIXMA Printing Solutions. You can also use the convenient web services presented by Canon. 1. Selecting Printer Information in an Apps Screen Note • You can also enter IPv4 address directly in the web browser to display printer information. 1. Check that the printer has been turned on 2.
Printer status This function displays printer information such as the remaining ink amount, the status, and detailed error information. You can also connect to the ink purchase site or support page, and use Web Services. Utilities This function allows you to set and execute the printer utility functions such as cleaning. AirPrint settings This function allows you to specify the Apple AirPrint settings, such as position information.
Print Easily from a Smartphone or Tablet with PIXMA Printing Solutions Use PIXMA Printing Solutions to easily print photos saved on a smartphone or tablet wirelessly. PIXMA Printing Solutions can be downloaded from App Store and Google Play.
Printing with Windows RT When you use Windows RT, printing is easy because you simply connect this printer to the network. For information about connecting to the network, see the setup URL (http://www.canon.com/ijsetup) for using this product from your computer, smartphone, or tablet device. When the connection is complete, the Canon Inkjet Print Utility software, which allows you to specify detailed print settings, is downloaded automatically.
Changing Connection Method between Machine and Smartphone/ Computer Connecting Computer or Smartphone to Printer Directly via Wireless LAN (Access Point Mode) Changing Printer Setting to Use Wireless LAN via Wireless LAN Router Connecting with USB Connect the printer and a computer with a USB cable. Prepare a USB cable.
Connecting Computer or Smartphone to Printer Directly via Wireless LAN (Access Point Mode) The printer has a function to connect a computer or smartphone to the printer directly via wireless LAN, allowing you to perform printing operation. Follow the procedure below to use this function. 1. Change printer setting. 2. Connect computer or smartphone to printer. 3. Perform printing operation. For more on printing operation, refer to device's or application's instruction manual.
• You can change the security setting using IJ Network Tool (bundled software). Connecting Device to Printer Important • Before connecting a computer to the printer and start printing with the method below, complete setup for wireless LAN (via a wireless router) from our website (canon.com/ijsetup). 1. Turn on wireless communication on your computer or smartphone. For Android or iOS, enable "Wi-Fi" on your device's "Setting" menu. For more on the procedure, refer to device's instruction manual.
Changing Printer Setting to Use Wireless LAN via Wireless LAN Router Follow the procedure below to change the printer setting to use wireless LAN via a wireless LAN router. 1. Make sure printer is turned on. 2. Press and hold Wi-Fi button and release it when POWER lamp flashes 4 times. 3. Make sure POWER lamp changed from flashing to lit. If the POWER lamp is not lit, repeat step 2.
Overview of the Printer Safety Guide Safety Precautions Regulatory and Safety Information Main Components and Basic Operations Main Components About the Power Supply of the Printer Loading Paper Loading Paper Replacing an Ink Tank Replacing an Ink Tank Checking the Ink Status from Your Computer Checking the Ink Status Maintenance When Printing Becomes Faint or Colors Are Incorrect Performing Maintenance from a Computer Cleaning the Printer Changing the Printer Settings Changing Printer Settings from Yo
Safety Guide Safety Precautions Regulatory and Safety Information 86
Safety Precautions Choosing a location • Do not install the machine in a location that is unstable or subject to excessive vibration. • Do not install the machine in locations that are very humid or dusty, in direct sunlight, outdoors, or close to a heating source. To avoid the risk of fire or electric shocks, use the machine under the operating environment specified in the On-screen Manual. • Do not place the machine on a thick rug or carpet.
Universal AC Adapter • When you pack the universal AC adapter for travel or storage, never wrap the cord around the body of the AC adapter to prevent the cord from splitting or separating from the body of the AC adapter and causing a short circuit.
Regulatory and Safety Information For models containing lithium battery • Dispose of used batteries according to the local regulations. • Risk of explosion if battery is replaced by an incorrect type. Users in the U.S.A. FCC Notice (U.S.A. Only) For 120V, 60Hz model Model Number: K10404 (Contains FCC ID: AZDK30357) This device complies with Part 15 of the FCC Rules.
Users in Canada This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment and meets RSS-102 of the IC radio frequency (RF) Exposure rules.
Korisnici u Srbiji Ovaj simbol označava da ovaj proizvod ne sme da se odlaže sa ostalim kućnim otpadom, u skladu sa WEEE Direktivom (2012/19/EU), Direktivom o baterijama (2006/66/EC) i nacionalnim zakonima.
time or not at all. Canon does not recommend extending the Activation Times from the optimum ones set as default. Energy Star® The Energy Star® programme is a voluntary scheme to promote the development and purchase of energy efficient models, which help to minimise environmental impact. Products which meet the stringent requirements of the Energy Star® programme for both environmental benefits and the amount of energy consumption will carry the Energy Star® logo accordingly.
Main Components and Basic Operations Main Components About the Power Supply of the Printer 93
Main Components Front View Rear View Side View Inside View 94
Front View (1) print head cover Open to replace an ink tank or remove jammed paper inside the printer. (2) paper guide Align with the left side of the paper stack. (3) paper support Pull out fully to support paper loaded on the rear tray. (4) rear tray cover Open to load paper in the rear tray. (5) rear tray Load paper here. Two or more sheets of the same size and type of paper can be loaded at the same time, and fed automatically one sheet at a time.
* All lamps are shown lit in the above figure for explanatory purposes. (8) ON button Turns the power on or off. Turning the Printer On and Off (9) POWER lamp Lights after flashing when the power is turned on. Note • You can check the status of the printer by the POWER and Alarm lamps. • • • • • POWER lamp is off: The power is off. POWER lamp lights: The printer is ready to print. POWER lamp flashes: The printer is getting ready to print, or printing is in progress.
Rear View (1) battery connector Connects the battery. For how to connect and use the battery, refer to the battery's instruction manual. (2) battery connector cover Covers the battery connector. When the battery is unplugged from the connector, use this cover to protect the battery connector.
Side View (1) AC adapter connector Plug in the supplied universal AC adapter plug here. (2) USB port Plug in the USB cable to connect the printer with a computer. Important • Do not touch the metal casing. • Do not plug in or unplug the USB cable while printing.
Inside View (1) ink lamps Lights or flashes to indicate the ink tank status. Checking the Ink Status with the Ink Lamps (2) print head holder Install the print head here. (3) print head lock lever Locks the print head into place. Important • Do not pull up this lever after installing the print head. • If you pull up the print head lock lever after installing the print head, push both tabs in left to right order until each clicks into place.
Note • For details on replacing an ink tank, see Replacing an Ink Tank.
About the Power Supply of the Printer Confirming that the Power Is On Turning the Printer On and Off Notice for the Power Plug/Power Cord Notice for Unplugging the Power Cord 101
Confirming that the Power Is On The POWER lamp is lit when the printer is turned on. Note • It may take a while for the printer to start printing immediately after you turn on the printer.
Turning the Printer On and Off Turning on the printer 1. Open the rear tray cover. The paper output slot cover opens automatically. 2. Press the ON button to turn on the printer. The POWER lamp flashes and then remains lit. Confirming that the Power Is On Note • It may take a while for the printer to start printing immediately after you turn on the printer. • If the Alarm lamp flashes, see If an Error Occurs. • If you use the battery, make sure that it is charged.
Important • When you unplug the power cord after turning off the printer, be sure to confirm that the POWER lamp is off. • If you stand the printer up or carry the printer before the POWER lamp goes off, this may cause the ink to leak or the printer to break. Note • It may take up to 40 seconds until the power is turned off. • You can set the printer to automatically turn off when no print jobs are sent to the printer for a certain interval. This is the default setting.
Notice for the Power Plug/Power Cord Unplug the power cord once a month to confirm that the power plug/power cord does not have anything unusual described below. • • • • • The power plug/power cord is hot. The power plug/power cord is rusty. The power plug/power cord is bent. The power plug/power cord is worn. The power plug/power cord is split. Caution • If you find anything unusual with the power plug/power cord described above, unplug the power cord and call for service.
Notice for Unplugging the Power Cord To unplug the power cord, follow the procedure below. Important • When you unplug the power cord, press the ON button, then confirm that the POWER lamp is off. Unplugging the power cord before the POWER lamp is turned off may cause drying or clogging of the print head and print quality may be reduced. • If you stand the printer up or carry the printer before the POWER lamp goes off, this may cause the ink to leak or the printer to break. 1.
Loading Paper Loading Paper 107
Loading Paper Loading Plain Paper / Photo Paper Loading Envelopes Media Types You Can Use Media Types You Cannot Use Printing Area 108
Loading Plain Paper / Photo Paper You can load plain paper or photo paper. Important • If you cut plain paper into small size such as 4" x 6" (10 x 15 cm) or 5" x 7" (13 x 18 cm) to perform trial print, it can cause paper jams. Note • We recommend Canon genuine photo paper for printing photos. For details on the Canon genuine paper, see Media Types You Can Use. • You can use general copy paper. • For the page size and paper weight you can use for this printer, see Media Types You Can Use.
4. Slide the paper guide (C) to the left, and load the paper against the far right (D) of the rear tray WITH THE PRINT SIDE FACING YOU. 5. Slide the paper guide (C) to align it with the paper stack. Do not slide the paper guide too hard against the paper. The paper may not be fed properly. Important • Always load paper in the portrait orientation (E). Loading paper in the landscape orientation (F) can cause paper jams.
Note • If paper has print side (front or back), such as photo paper, load it with the whiter side (or glossy side) facing you. • Keep the paper stack height below the tab (G) of the paper guide. 6. Set the paper thickness lever (H) to the right. Note • If the corners or edges of the paper are smudged, try to print with the paper thickness lever set to the left. It may improve print quality. Reset the paper thickness lever to the right when you finish printing.
Loading Envelopes You can load Envelope DL and Envelope Com 10. The address is automatically rotated and printed according to the envelope's direction by specifying with the printer driver properly. Important • Printing of envelopes from a digital camera is not supported. • Do not use the following envelopes. They could jam in the printer or cause the printer to malfunction.
4. Slide the paper guide (C) to the left, and load the envelopes against the far right (D) of the rear tray WITH THE PRINT SIDE FACING YOU. The folded flap of the envelope will be faced up on the left side. Up to 10 envelopes can be loaded at once. 5. Slide the paper guide (C) to align it with the envelopes. Do not slide the paper guide too hard against the envelopes. The envelopes may not be fed properly.
Note • Keep the envelope stack height below the tab (G) of the paper guide. 6. Set the paper thickness lever (H) to the left. Note • Reset the paper thickness lever to the right when you finish printing. Note • When printing, select the size and type of the loaded envelopes on the print settings screen of the printer driver.
Media Types You Can Use Choose paper suitable for printing, for the best print results. Canon provides you various types of paper to enhance the fun of printing, such as stickers as well as papers for photo or document. We recommend the use of Canon genuine paper for printing your important photos. Media Types Commercially available papers • Plain Paper (including recycled paper) • Envelopes*1 Canon genuine papers The Model Number of Canon genuine paper is shown in brackets.
Standard sizes: • • • • • • • • • • Letter Legal A5 A4 B5 4" x 6" (10 x 15 cm) 5" x 7" (13 x 18 cm) 8" x 10" (20 x 25 cm) Envelope DL Envelope Com 10 Non-standard sizes: You can print on non-standard size paper within the following ranges. • Minimum size: 2.17 x 3.58 inches (55.0 x 91.0 mm) • Maximum size: 8.50 x 23.00 inches (215.9 x 584.2 mm) Paper Weight You can use paper in the following weight range.
Paper Load Limit Commercially Available Papers Media Name Paper Thickness Lever*1 Rear Tray Limit of the Outputted Paper Plain Paper (including recycled paper)*2 Approx. 50 sheets Right Approx. 10 sheets Envelopes 10 envelopes Left 5 envelopes Canon Genuine Papers Note • We recommend that you remove the previously printed sheet from the paper output slot cover before continuously printing to avoid blurs and discoloration. Paper for printing photos: Media Name
Media Types You Cannot Use Do not use the following types of paper. Using such paper will cause not only unsatisfactory results, but also the printer to jam or malfunction.
Printing Area Printing Area Other Sizes than Letter, Legal, Envelopes Letter, Legal Envelopes 119
Printing Area To ensure the best print quality, the printer allows a margin along each edge of media. The actual printable area will be the area inside these margins. Recommended printing area : Canon recommends that you print within this area. Printable area : The area where it is possible to print. However, printing in this area can affect the print quality or the paper feed precision. Note • By selecting Borderless Printing option, you can make prints with no margins.
Other Sizes than Letter, Legal, Envelopes Size Printable Area (width x height) A5 5.56 x 7.95 inches (141.2 x 202.0 mm) A4 8.00 x 11.38 inches (203.2 x 289.0 mm) B5 6.90 x 9.80 inches (175.2 x 249.0 mm) 4" x 6" (10 x 15 cm) 3.73 x 5.69 inches (94.8 x 144.4 mm) 5" x 7" (13 x 18 cm) 4.73 x 6.69 inches (120.2 x 169.8 mm) 8" x 10" (20 x 25 cm) 7.73 x 9.69 inches (196.4 x 246.0 mm) Recommended printing area A: 1.81 inches (46.0 mm) B: 1.38 inches (35.0 mm) Printable area C: 0.12 inch (3.0 mm) D: 0.
Letter, Legal Size Printable Area (width x height) Letter 8.00 x 10.69 inches (203.2 x 271.4 mm) Legal 8.00 x 13.69 inches (203.2 x 347.6 mm) Recommended printing area A: 1.81 inches (46.0 mm) B: 1.38 inches (35.0 mm) Printable area C: 0.12 inch (3.0 mm) D: 0.20 inch (5.0 mm) E: 0.25 inch (6.4 mm) F: 0.25 inch (6.
Envelopes Size Recommended Printing Area (width x height) Envelope DL 4.06 x 7.50 inches (103.2 x 190.5 mm) Envelope Com 10 3.85 x 8.34 inches (98.0 x 211.8 mm) Recommended printing area A: 0.12 inch (3.0 mm) B: 1.04 inches (26.5 mm) C: 0.13 inch (3.4 mm) D: 0.13 inch (3.
Replacing an Ink Tank Replacing an Ink Tank Checking the Ink Status 124
Replacing an Ink Tank When remaining ink cautions or errors occur, the Alarm lamp will flash to inform you of the error. Count the number of flashes and take appropriate action. If an Error Occurs Note • If print results become faint or white streaks appear despite sufficient ink levels, see Maintenance Procedure. Replacing Procedure When you need to replace an ink tank, follow the procedure below. Important • If you remove an ink tank, replace it immediately.
Caution • Do not hold the print head holder to stop or move it forcibly. Do not touch the print head holder until it stops completely. Important • Do not place any object on the print head cover. It will fall into the rear tray when the print head cover is opened and cause the printer to malfunction. • Do not touch the metallic parts or other parts inside the printer. • If the print head cover is left open for more than 10 minutes, the print head holder moves to the right.
Note • Do not touch the print head lock lever (B). If you pull up the print head lock lever, lock it again. Inside View • Do not remove both ink tanks at the same time. Be sure to replace ink tanks one by one when replacing both ink tanks. • For details on ink lamp flashing speed, see Checking the Ink Status with the Ink Lamps. 4. Remove the new ink tank from its packaging, then remove the protective cap (C) from the bottom of the ink tank.
6. Press the mark on the ink tank until the ink tank snaps firmly into place. Make sure that the ink lamp lights up. Important • Install both ink tanks to print. The printer cannot be used unless both ink tanks are installed. • If the front (innermost) part of the ink tank (F) is sticking up, push down on the Canon logo on the ink tank. Do not remove the ink tank forcibly.
7. Close the print head cover. Note • If the Alarm lamp still flashes after the print head cover is closed, take appropriate action. If an Error Occurs • When you start printing after replacing the ink tank, the printer starts cleaning the print head automatically. Do not perform any other operations until the printer completes the cleaning of the print head. While cleaning is in progress, the POWER lamp is flashing.
Checking the Ink Status Checking the Ink Status with the Ink Lamps You can also check the ink status on the computer screen.
Checking the Ink Status with the Ink Lamps 1. Make sure that the power is turned on. 2. Open the print head cover. Replacing Procedure 3. Check the ink lamp. Close the print head cover after checking the ink lamp status. Replacing Procedure • The ink lamp is on. The ink tank is correctly installed. • The ink lamp is flashing. Flashing slowly (at around 3-second intervals) ...... Repeats Ink tank is running low. Prepare a new ink tank. Flashing fast (at around 1-second intervals) ......
Maintenance When Printing Becomes Faint or Colors Are Incorrect Performing Maintenance from a Computer Cleaning the Printer 132
When Printing Becomes Faint or Colors Are Incorrect Maintenance Procedure Printing the Nozzle Check Pattern Examining the Nozzle Check Pattern Cleaning the Print Head Aligning the Print Head 133
Maintenance Procedure If print results are blurred, colors are not printed correctly, or print results are unsatisfactory (e.g. misaligned printed ruled lines), perform the maintenance procedure below. Important • Do not rinse or wipe the print head and ink tank. This can cause trouble with the print head and ink tank. Note • Open the print head cover and make sure that both lamps on the ink tanks are lit. If the lamps are flashing or off, take appropriate action.
Note • When you have performed the procedure until step 4 and the problem has not been resolved, turn off the power and clean the print head deeply again after 24 hours. If the problem is still not resolved, the print head may be damaged. Contact the service center. When the Print Results Are Not Even such as the Ruled Lines Are Misaligned: Step Align the print head.
Printing the Nozzle Check Pattern Print the nozzle check pattern to determine whether the ink ejects properly from the print head nozzle. Note • If the remaining ink level is low, the nozzle check pattern will not be printed correctly. Replace the ink tank whose ink is low. You need to prepare: a sheet of A4 or Letter-sized plain paper 1. Make sure that the power is turned on. 2. Load a sheet of A4 or Letter-sized plain paper in the rear tray. 3. Set the paper thickness lever to the right.
Examining the Nozzle Check Pattern Examine the nozzle check pattern, and clean the print head if necessary. 1. Check if there are missing lines in the pattern A or horizontal white streaks in the pattern B. C: Number of sheets printed so far If there are missing lines in the pattern A: Cleaning the print head of the Black ink is required. D: Good E: Bad (lines are missing) If there are horizontal white streaks in the pattern B: Cleaning the print head of the Color ink is required.
Cleaning the Print Head Clean the print head if lines are missing or if horizontal white streaks are present in the printed nozzle check pattern. Cleaning unclogs the nozzles and restores the print head condition. Cleaning the print head consumes ink, so clean the print head only when necessary. 1. Make sure that the power is turned on. 2. Hold down the RESUME/CANCEL button until the POWER lamp flashes once, then release it immediately. The printer starts cleaning the print head.
Aligning the Print Head If printed ruled lines are misaligned or print results are otherwise unsatisfactory, adjust the print head position. Note • If the remaining ink level is low, the print head alignment sheet will not be printed correctly. Replace the ink tank whose ink is low.
Performing Maintenance from a Computer Cleaning the Print Heads from Your Computer Cleaning Inside the Printer Cleaning the Paper Feed Rollers from Your Computer Use Your Computer to Print a Nozzle Check Pattern Aligning the Print Head Aligning the Print Head Position from Your Computer Checking the Ink Status from Your Computer Checking the Current Battery Level 140
Cleaning the Print Heads from Your Computer The print head cleaning function allows you to clear up clogged print head nozzle. Perform print head cleaning if printing is faint or a specific color fails to print, even though there is enough ink. The procedure for cleaning the print head is as follows: Cleaning 1. Select Cleaning from the pop-up menu on the Canon IJ Printer Utility 2. Click the Cleaning icon When the dialog opens, select the ink group for which cleaning is to be performed.
When the dialog opens, select the ink group for which deep cleaning is to be performed. Click to display the items you need to check before performing deep cleaning. 3. Execute deep cleaning Make sure that the printer is on and then click OK. Click OK when the confirmation message appears. Print head deep cleaning starts. 4. Complete deep cleaning The Nozzle Check dialog opens after the confirmation message. 5. Check the results To check whether the print quality has improved, click Print Check Pattern.
Cleaning Inside the Printer To prevent smudges on the back side of the paper, perform bottom plate cleaning. Also perform bottom plate cleaning if ink smudges caused by something other than print data appear on the printed page. The procedure for performing bottom plate cleaning is as follows: Bottom Plate Cleaning 1. Select Cleaning from the pop-up menu on the Canon IJ Printer Utility 2. Click the Bottom Plate Cleaning icon The dialog opens. 3.
Cleaning the Paper Feed Rollers from Your Computer Cleans the paper feed rollers. Perform feed roller cleaning when there are paper particles sticking to the paper feed rollers and paper is not fed properly. The procedure for performing the feed roller cleaning is as follows: Roller Cleaning 1. Prepare the printer Remove all sheets of paper from the rear tray, and set the paper thickness lever to the right. 2. Select Cleaning from the pop-up menu on the Canon IJ Printer Utility 3.
Use Your Computer to Print a Nozzle Check Pattern The nozzle check function allows you to check whether the print head is working properly by printing a nozzle check pattern. Print the pattern if printing becomes faint, or if a specific color fails to print. The procedure for printing a nozzle check pattern is as follows: Nozzle Check 1. Select Test Print from the pop-up menu on the Canon IJ Printer Utility 2. Click the Nozzle Check icon The confirmation message appears.
Aligning the Print Head When you perform head position adjustment, errors in the print head adjustment position are corrected and conditions such as color and line streaking are improved. If the print results appear uneven because of line shifts or other conditions, adjust the position of the print head. On this printer, you can adjust the print head either automatically or manually.
Aligning the Print Head Position from Your Computer Print head alignment corrects the installation positions of the print head and improves deviated colors and lines. This printer supports two head alignment methods: automatic head alignment and manual head alignment. Normally, the printer is set for automatic head alignment. If the printing results of automatic print head alignment are not satisfactory, perform manual head alignment.
Aligning the Print Head Position Manually from Your Computer Print head alignment corrects the installation positions of the print head and improves deviated colors and lines. This printer supports two head alignment methods: automatic head alignment and manual head alignment. Normally, the printer is set for automatic head alignment. If the printing results of automatic print head alignment are not satisfactory, perform manual head alignment.
Note • If it is difficult to pick the best pattern, pick the setting that produces the least noticeable vertical streaks. (A) Least noticeable vertical streaks (B) Most noticeable vertical streaks 9. Confirm the displayed message and click OK The second pattern is printed. Important • Do not open the print head cover while printing is in progress. 10. Check the printed pattern Enter the numbers of the patterns with the least noticeable stripes in the associated boxes, and click OK.
Note • If it is difficult to pick the best pattern, pick the setting that produces the least noticeable horizontal stripes. (A) Least noticeable horizontal stripes (B) Most noticeable horizontal stripes 11. Confirm the displayed message and click OK or Cancel Click Cancel to complete the basic print head alignment. To run the alignment for correcting problems such as streaks appearing on the print surface, load one sheet of A4 size or Letter size plain paper in the rear tray and click OK.
Note • If it is difficult to pick the best pattern, pick the setting that produces the least noticeable horizontal streaks. (A) Least noticeable horizontal streaks (B) Most noticeable horizontal streaks Note • After head alignment is completed, you can print and check the current setting. To do so, click the Print Head Alignment icon and when the message is displayed, click Print Alignment Value.
Checking the Current Battery Level Battery Level Information allows you to check your model's current battery level. The battery level indicator is displayed when the optional battery is being used. 1. Select Battery Level Information from the pop-up menu on the Canon IJ Printer Utility An illustration of the battery types and their status is displayed. An icon will be displayed to warn that a battery is running low or a no battery error has occurred. The battery is running low.
Cleaning the Printer Cleaning the Exterior of the Printer Cleaning the Paper Feed Roller Cleaning the Inside of the Printer (Bottom Plate Cleaning) 153
Cleaning the Exterior of the Printer Be sure to use a soft and dry cloth such as eyeglasses cleaning cloth and wipe off dirt on the surface gently. Smooth out wrinkles on the cloth if necessary before cleaning. Important • Be sure to turn off the power and unplug the power cord before cleaning the printer. • Do not use tissue paper, paper towels, rough-textured cloth, or similar materials for cleaning so as not to scratch the surface.
Cleaning the Paper Feed Roller If the paper feed roller is dirty or paper powder is attached to it, paper may not be fed properly. In this case, perform the paper feed roller cleaning from the computer. Cleaning will wear out the paper feed roller, so perform this only when necessary.
Cleaning the Inside of the Printer (Bottom Plate Cleaning) Remove stains from the inside of the printer. If the inside of the printer becomes dirty, printed paper may get dirty, so we recommend performing cleaning regularly. You need to prepare: two sheets of A4 or Letter-sized plain paper* * Be sure to use a new piece of paper. 1. Make sure that the power is turned on. 2. Load only one sheet of A4 or Letter-sized plain paper in the rear tray. 3.
Important • Be sure to turn off the power and unplug the power cord before cleaning the printer.
Changing the Printer Settings Changing Printer Settings from Your Computer Using the Printer with the Access Point Mode Initializing the Printer Settings Disabling the Wireless LAN Function of the Printer Setting the Ink Usage Control 158
Changing Printer Settings from Your Computer Checking the Ink Status from Your Computer Registering a Changed Printing Profile Setting the Ink Usage Control Managing the Printer Power Reducing the Printer Noise Changing the Printer Operation Mode 159
Checking the Ink Status from Your Computer You can check the detailed information such as the remaining ink level and the ink tank types of your model. 1. Select Ink Level Information from the pop-up menu on the Canon IJ Printer Utility An illustration of the ink types and their status is displayed. If a warning or error related to the remaining ink level occurs, the printer driver displays an icon to let you know. 2. If necessary, click Ink Details You can check the ink-related information.
Registering a Changed Printing Profile You can name and register the printing profile you made in the Print Dialog. The registered printing profile can be called up from Presets to be used. You can also delete the unnecessary printing profile. The procedure for registering a printing profile is as follows: Registering a Printing Profile 1. In the Print dialog, set the necessary items 2. Select Save Current Settings as Preset... (Save As...) from the Presets 3.
Deleting Unnecessary Printing Profile 1. Select the printing profile to be deleted • If you are using OS X Mavericks v10.9, OS X Mountain Lion v10.8, or OS X Lion v10.7 In the print dialog, select Show Presets... in the Presets section. Then in the dialog that appears, select the name of the printing profile to be deleted. • If you are using Mac OS X v10.6.8 On Presets in the Print dialog, select the name of printing profile you want to delete. 2.
Setting the Ink Usage Control This function allows you to reduce the amount of black ink used and to produce the black sections with color inks when printing to plain paper. The procedure for configuring the ink usage control function is as follows: 1. Select Ink Usage Control from the pop-up menu on the Canon IJ Printer Utility 2. If necessary, complete the following settings: Save Black Ink Controls the consumption of black ink during printing. This function allows you to save black ink.
Managing the Printer Power This function allows you to manage the printer power from the printer driver. The procedure for managing the printer power is as follows: Power Off The Power Off function turns off the printer. When you use this function, you will not be able to turn the printer on from the printer driver. 1. Select Power Settings from the pop-up menu on the Canon IJ Printer Utility 2. Execute power off Click Power Off, and when the confirmation message appears, click OK.
The setting is enabled after this. When you want to disable this function, select Disable from the list according to the same procedure. Important • If you connect this printer to a network and use it by using an AC adapter, you can set Auto Power Off but the power will not be turned off automatically.
Reducing the Printer Noise The silent function allows you to reduce the operating noise of this printer. Select when you wish to reduce the operating noise of the printer at night, etc. Using this function may lower the print speed. The procedure for using the quiet mode is as follows: 1.
Make sure that the printer is on and click Apply. Click OK when the confirmation message appears. The settings are enabled hereafter. Note • The effects of the quiet mode may be less depending on the print quality settings.
Changing the Printer Operation Mode If necessary, switch between various modes of printer operation. The procedure for configuring Custom Settings is as follows: 1. Make sure that the printer is on, and then select Custom Settings from the pop-up menu on the Canon IJ Printer Utility Note • If the computer is unable to communicate with the printer, a message may be displayed because the computer cannot access the function information that was set on the printer.
Important • When you use a custom page size, correctly set the size of the paper loaded in the printer in the Custom Paper Sizes dialog. If an error message is displayed even though paper of the same size that was specified is loaded, uncheck the Detect the paper width when printing from computer check box. 3. Apply the settings Click Apply and when the confirmation message appears, click OK. The printer operates with the modified settings hereafter.
Connecting Computer or Smartphone to Printer Directly via Wireless LAN (Access Point Mode) The printer has a function to connect a computer or smartphone to the printer directly via wireless LAN, allowing you to perform printing operation. Follow the procedure below to use this function. 1. Change printer setting. 2. Connect computer or smartphone to printer. 3. Perform printing operation. For more on printing operation, refer to device's or application's instruction manual.
• You can change the security setting using IJ Network Tool (bundled software). Connecting Device to Printer Important • Before connecting a computer to the printer and start printing with the method below, complete setup for wireless LAN (via a wireless router) from our website (canon.com/ijsetup). 1. Turn on wireless communication on your computer or smartphone. For Android or iOS, enable "Wi-Fi" on your device's "Setting" menu. For more on the procedure, refer to device's instruction manual.
Initializing the Printer Settings You can initialize the printer settings. Important • When using the printer over wireless LAN, note that initialization erases all network settings on the printer, and printing operation from a computer over network may become impossible. To use the printer over network, perform setup according to the instructions on our website. Follow the procedure below to initialize the printer settings. 1. Make sure that the printer is turned on. 2.
Disabling the Wireless LAN Function of the Printer Follow the procedure below to disable the wireless LAN. 1. Make sure that the printer is turned on. 2. Press and hold the RESUME/CANCEL button then release the button when the POWER lamp flashes 12 times. The Wi-Fi lamp goes off. Note • When you enable the wireless LAN, press and hold the RESUME/CANCEL button, then release the button when the POWER lamp flashes 10 times.
Setting the Ink Usage Control The ink usage control function allows you to reduce black ink consumption and to produce the black sections with color inks when printing to plain paper from a computer. Reducing Black Ink Consumption Producing the Black Sections with Color Inks Important • The print quality may deteriorate if this function is used. Reducing Black Ink Consumption This function allows you to reduce the black ink consumption during printing and to allow longer life of black ink.
- When Standard is selected for Print Quality on Quality & Media in the Print dialog - When Custom is selected for Print Quality on Quality & Media in the Print dialog, and the second or third setting from the right is selected for Quality • This function is not available when Borderless Printing is selected. 1. Make sure that the printer is turned on. 2. Open the Canon IJ Printer Utility. 3. Select Ink Usage Control in the pop-up menu. 4. Select Use Composite Black (Immediate Measure). 5. Click Apply. 6.
Information about Network Connection Useful Information about Network Connection 176
Useful Information about Network Connection Default Values Set at Factory (Network) Connecting the Printer to the Computer Using a USB Cable When Detecting the Printers Have the Same Name Connecting to Other Computer with LAN/Changing the Connection Method from USB to LAN Printing Out Network Setting Information 177
Default Values Set at Factory (Network) Default Values of the LAN Connection Item The default Enable/disable LAN Enable SSID BJNPSETUP Communication mode Infrastructure Wireless LAN security Disable IPv4 IP address Auto setup IPv6 IP address Auto setup Set printer name* XXXXXXXXXXXX Enable/disable IPv6 Enable Enable/disable WSD (WSD settings) Enable Timeout setting (WSD settings) 1 minute Enable/disable Bonjour (Bonjour settings) Enable Service name (Bonjour settings) Canon iP110 seri
Connecting the Printer to the Computer Using a USB Cable Connect the printer and the computer using a USB cable as the illustration below. The USB port is located on the side of the printer.
When Detecting the Printers Have the Same Name When the printer is detected, you may see multiple printers of the same name on the detection result screen. The printer names on the screen are displayed with the MAC address added at the end of the names or displayed as the printer name specified by Bonjour. Select a printer with checking the MAC address, the printer name specified by Bonjour, or the serial number set to the printer against that on the detection result screen.
Connecting to Other Computer with LAN/Changing the Connection Method from USB to LAN To add the computer connecting the printer with LAN or to change the connection method between the printer and the computer from USB to LAN, perform setup according to the instructions on our website. Connecting to Other Computer with LAN To add the computer connecting the printer with LAN, perform setup according to the instructions on our website.
Printing Out Network Setting Information You can print out the current network settings of the printer. Important • This print out contains valuable information about your computer. Handle it with care. 1. Make sure that the printer is turned on. 2. Load a sheet of A4 or Letter-sized plain paper. 3. Press and hold the RESUME/CANCEL button, then release the button when the POWER lamp flashes 6 times. The printer starts printing the network setting information.
Subnet Prefix Length *2 Subnet Prefix Length XXX IPsec *3 IPsec setting Active Security Protocol *3 Method of the Security Protocol ESP/ESP & AH/AH WPS PIN CODE WPS PIN code XXXXXXXX Wireless LAN DRX Discontinuous reception (wireless LAN) Enable/Disable Other Settings Other settings - Printer Name Printer name Printer name (Up to 15 alphanumeric characters) WSD WSD setting Enable/Disable WSD Timeout Timeout 1/5/10/15/20 [min] LPR Protocol LPR protocol setting Enable/Disable Bon
About Network Communication Changing and Confirming Network Settings Appendix for Network Communication 184
Changing and Confirming Network Settings IJ Network Tool Canon IJ Network Tool Screen Canon IJ Network Tool Menus Changing the Settings in the Wireless LAN Sheet Changing the WEP Detailed Settings Changing the WPA/WPA2 Detailed Settings Changing the Settings in the Wired LAN Sheet Changing the Settings in the Admin Password Sheet Monitoring Wireless Network Status Initializing the Network Settings of the Machine Viewing the Modified Settings 185
IJ Network Tool IJ Network Tool is a utility that enables you to display and modify the machine network settings. It is installed when the machine is set up. Important • To use the machine over LAN, make sure you have the equipment necessary for the connection type, such as an access point or a LAN cable. • Do not start up IJ Network Tool while printing. • Do not print when IJ Network Tool is running.
Canon IJ Network Tool Screen This section describes the items displayed on the Canon IJ Network Tool screen. 1. Utilities Modifies the settings of the machine. Select to change the network name (SSID) settings. Setup Sets up the machine. If you setup the machine from scratch, connect your computer and the machine with a USB cable. 2. Printers: Printer name, type, and connection destination are displayed. The selected printer can be set up or be modified. 3. Update Performs printer detection again.
4. Configuration... Enabled when Utilities is selected. Click to display the Configuration screen to configure settings of the selected printer. Note • This item has the same function as Configuration... in the Settings menu.
Canon IJ Network Tool Menus This section describes the menus in Canon IJ Network Tool. 1. Canon IJ Network Tool menu About Canon IJ Network Tool Displays the version of this application. Quit Canon IJ Network Tool Exits IJ Network Tool. 2. View menu Status Displays the Status screen to confirm the printer connection status and wireless communication status. In the access point mode, this item is grayed out and you cannot confirm the printer connection status.
Set up printer's wireless LAN... You can change the access point mode settings. Perform settings following the message on the screen. If you change the Encryption Method: setting and the Password: setting, on the Set up printer's wireless LAN screen, the changed settings are applied to the printer settings. Note • You can use this function only when you are using a computer compatible with the wireless LAN. 4. Help menu Instructions Displays this guide.
Changing the Settings in the Wireless LAN Sheet To change the wireless network settings of the printer, connect the printer and the computer with a USB cable temporarily. If you modify the wireless network settings of the computer over wireless connection without USB connection, your computer may not be able to communicate with the machine after modifying the settings. Note • This screen is not available depending on the printer you are using.
Access point mode Connects external wireless communication devices (e.g. computers, smartphones, or tablets) to the printer using it as an access point. Note • When Access point mode is displayed on Network Type:, you cannot change the settings on the Wireless LAN sheet or the Admin Password sheet. • You can perform setting from Set up printer's wireless LAN... on the Settings menu when you use the printer with the access point mode.
The security has been strengthened more than WEP. If a network key has not been set, the Authentication Type Confirmation screen is displayed automatically. To change network key settings before, click Configuration... to display the WPA/WPA2 Details screen. Changing the WPA/WPA2 Detailed Settings 5. Configuration... The detailed settings screen is displayed. The network password (WEP) or the WPA/WPA2 key selected in Encryption Method: can be confirmed and changed.
Note • Signal strength is displayed as follows. : Good : Fair : Poor • Type of encryption is displayed as follows. Blank: No encryption WEP: WEP is set WPA/WPA2: WPA/WPA2 is set 2. Refresh Click to update the list of access points when your target access point is not detected. If the target access point is set to a closed network (the stealth mode), click Cancel to return to the previous screen and enter the network name (SSID) in Network (SSID). Note • Make sure that the access point is turned on. 3.
Changing the WEP Detailed Settings Note • This screen is not available depending on the printer you are using. To change the wireless network settings of the printer, connect the printer and the computer with a USB cable temporarily. If you modify the wireless network settings of the computer over wireless connection without USB connection, your computer may not be able to communicate with the machine after modifying the settings. 1. Start up IJ Network Tool. 2. Select the printer in Printers:.
Hexadecimal (Hex) 10 digits 26 digits 2. Key Length: Select either 64 bit or 128 bit. 3. Key Format: Select either ASCII or Hex. 4. Key ID: Select the Key ID (index) set to the access point. Note • When the printer is connected to an AirPort Base Station via a LAN: When the printer is connected to an AirPort Base Station via a LAN, confirm the settings in Wireless Security of AirPort Utility. • Select 64 bit if WEP 40 bit is selected for the key length in the AirPort Base Station. • Select 1 for Key ID:.
Changing the WPA/WPA2 Detailed Settings Note • This screen is not available depending on the printer you are using. To change the wireless network settings of the printer, connect the printer and the computer with a USB cable temporarily. If you modify the wireless network settings of the computer over wireless connection without USB connection, your computer may not be able to communicate with the machine after modifying the settings.
• If the printer cannot communicate with the computer after the encryption type of the printer was switched, make sure that encryption types for the computer and the access point match that set to the printer. Note • This machine supports WPA/WPA2-PSK (WPA/WPA2-Personal) and WPA2-PSK (WPA2Personal).
Changing the Settings in the Wired LAN Sheet Note • This screen is not available depending on the printer you are using. • Activate the wired LAN setting of the printer to change the settings in the Wired LAN sheet. 1. Start up IJ Network Tool. 2. Select the printer in Printers:. 3. Click the Configuration... button. 4. Click the Wired LAN button. 5. Change the settings or confirm. Click OK after changing configuration.
Changing the Settings in the Admin Password Sheet Note • You cannot change the settings when using the access point mode. 1. Start up IJ Network Tool. 2. Select the printer in Printers:. 3. Click the Configuration... button. 4. Click the Admin Password button. The Admin Password sheet is displayed. 5. Change the settings or confirm. 1. Use admin password Set an administrator password with privileges to set up and change detailed options. To use this feature, select this check box and enter a password.
A screen is displayed asking you for confirmation before the settings are sent to the printer. If you click OK, the settings are sent to the printer and the Transmitted Settings screen is displayed. Enter Password Screen The following screen is displayed if an administrator password is set to the printer. • Admin Password Enter the administrator password that was set. For security purposes, your password is not displayed as you type it.
Monitoring Wireless Network Status Note • This screen is not available depending on the printer you are using. • When using the machine over the wired LAN, you cannot monitor network status. 1. Start up IJ Network Tool. 2. Select the printer in Printers:. 3. Select Status from the View menu. The Status screen is displayed and you can check the printer status and connection performance. 1. Signal Level: Indicates the strength of the signal received by the printer, ranging from 0% to 100%. 2.
The wireless connection may use the same frequency band as microwave ovens and other sources of radio interference. Try to keep the printer and the access point away from such sources. • Check if the radio channel of the access point is close to that of other access points nearby. If the radio channel of the access point is close to that of other access points nearby, the connection performance may become unstable. Be sure to use a radio channel that does not interfere with other access points.
Initializing the Network Settings of the Machine Important • Note that initialization erases all network settings on the machine, and printing or scanning operation from a computer over network may become impossible. To use the machine over network, perform setup according to the instructions on our website. 1. Start up IJ Network Tool. 2. Select the printer in Printers:. 3. Select Maintenance... from the Settings menu. 1.
Viewing the Modified Settings The Confirmation screen is displayed when you modified the printer settings on the Configuration screen. When you click OK on the Confirmation screen, the following screen is displayed for confirming the modified settings. 1. Settings: A list of changes made in the Configuration screen is displayed.
Appendix for Network Communication Using the Card Slot over a Network About Technical Terms Restrictions 206
Using the Card Slot over a Network Note • This screen is not available depending on the printer you are using. Mounting the Card Slot as the Network Drive Restrictions on Card Slot Use over a Network Mounting the Card Slot as the Network Drive The card slot must be mounted to use it over a network. To mount the card slot as the network drive, follow the procedure below. 1. Insert a memory card into the card slot of the machine. 2. Check the current printer name.
• The card slot can be shared by multiple computers, if the machine is connected to a network. Multiple computers can read files from a memory card in the card slot at the same time. • If your computer joins a domain, the card slot may not be mounted as the network drive. • If you use the memory card stored the large size files or many files, a large amount of card access may be generated. In this case, the operation in the memory card may be impossible or slow.
About Technical Terms In this section, technical terms used in the manual are explained. A B C D F I K L M N P R S T U W A • Access Point A wireless transceiver or base station that receives information from wireless clients/the machine and rebroadcasts it. Required in an infrastructure network. • Access point mode The machine is used as an access point to connect external wireless communication devices (e.g.
• AirPort Network (Infra) Client computer and machine setup where all wireless communications pass through an access point. • Authentication Method The method that an access point uses to authenticate a printer through a wireless LAN. The methods are agreeable each other. When using WEP as an encryption method, the authentication method is able to fix to Open System or Shared Key. For WPA/WPA2, authentication method is PSK.
F • Firewall It is a system that prevents an unlawful computer access in the network. To prevent, you can use the firewall function of a broadband router, the security software installed in the computer, or operation system for computer. I • IEEE 802.11b International standard for wireless LAN using the 2.4 GHz frequency range with a throughput of up to 11 Mbps. • IEEE 802.11g International standard for wireless LAN using the 2.4 GHz frequency range with a throughput of up to 54 Mbps. Compatible with 802.
• Key Length Length of the WEP key. Select either 64 bits or 128 bits. Longer key length allows you to set a more complex WEP key. L • Link Quality The status of connection between the access point and the printer excluding noise (interference) is indicated with a value from 0 to 100%. • LPR A platform-independent printing protocol used in TCP/IP networks. It is not supported bidirectional communication. M • MAC Address (AirPort ID) Also known as the physical address.
• PSK An encryption method employed by WPA/WPA2. R • Router A relay device to connect to another network. S • Signal Level The strength of the signal received by the printer from the access point is indicated with a value from 0 to 100%. • SSID Unique label for wireless LAN. It is often represented such as a network name or an access point name. SSID distinguishes one wireless LAN from another to prevent interference.
U • USB Serial interface designed to enable you to "hot-swap" devices, i.e., by plugging and unplugging them without turning off the power. W • WEP/WEP Key An encryption method employed by IEEE 802.11. Shared security key used to encrypt and decrypt data sent over wireless networks. This printer supports key length of 64 bits or 128 bits, key format of ASCII code or Hexadecimal, and key number of 1 to 4.
• WPS (Wi-Fi Protected Setup) WPS is a standard for easy and secure establishment of a wireless network. There are 2 primary methods used in the Wi-Fi Protected Setup: PIN entry: a mandatory method of setup for all WPS certified devices Push button configuration (PBC): an actual push button on the hardware or through a simulated push button in the software.
Restrictions If you use a printer over the wireless LAN, the printer may recognize nearby wireless systems, you should set a network key (WEP or WPA/WPA2) to the access point to encrypt wireless transmission. Wireless communication with a product that does not comply with the Wi-Fi standard cannot be guaranteed. Connecting with too many computers may affect the printer performance, such as printing speed.
Tips for Ensuring Optimal Printing Quality Useful Information about Ink Key Points to Successful Printing Be Sure to Make Paper Settings after Loading Paper Canceling a Print Job Printer Handling Precautions Key to Enjoying Consistent Printing Quality Precautions for Safe Transport of the Printer 217
Useful Information about Ink How is ink used for various purposes other than printing? Ink may be used for purposes other than printing. Ink is not only used for printing, but also for cleaning the print head to maintain the optimal printing quality. The printer has the function to automatically clean the ink jet nozzles to prevent clogging. In the cleaning procedure, ink is pumped out from the nozzles. Used ink for nozzle cleaning is limited to a small amount.
Key Points to Successful Printing Check the printer status before printing! • Is the print head OK? If a print head nozzle is clogged, print will be faint and papers will be wasted. Print the nozzle check pattern to check the print head. Maintenance Procedure • Is the inside of the printer smeared with ink? After printing large quantities of paper or performing borderless printing, the area where papers go through may get smeared with ink. Clean the inside of your printer with Bottom Plate Cleaning.
Be Sure to Make Paper Settings after Loading Paper If the media type setting is not the one for the loaded paper, printing results may not be satisfactory. After loading paper, be sure to select the appropriate media type setting for the loaded paper. Print Results Not Satisfactory There are various types of paper: paper with special coating on the surface for printing photos with optimal quality and paper suitable for documents.
Canceling a Print Job Never press the ON button! If you press the ON button while printing is in progress, the print data sent from the computer queues in the printer and you may not be able to continue to print. Press the RESUME/CANCEL button to cancel printing.
Printer Handling Precautions Do not place any object on the print head cover! Do not place any object on the print head cover. It will fall into the rear tray when the print head cover is opened and cause the printer to malfunction. Also, place the printer where objects will not fall on it.
Key to Enjoying Consistent Printing Quality The key to printing with the optimal printing quality is to prevent the print head from drying or clogging. Always observe the following rules for optimal printing quality. Never unplug the power cord until the power is turned off! If you press the ON button to turn off the power, the printer caps the print head (nozzles) automatically to prevent from drying.
Precautions for Safe Transport of the Printer When relocating the printer, make sure of the following. Important • Pack the printer in a sturdy box, using sufficient protective material to ensure safe transport. • With the print head and ink tank left installed in the printer, press the ON button to turn off the power. This allows the printer to automatically cap the print head, thus preventing it from drying.
Legal Limitations on Use of Your Product and Use of Images It may be unlawful to print the following documents. The list provided is non-exhaustive. When in doubt, check with a legal representative in your jurisdiction.
Carrying the Printer Exercise sufficient care when carrying the printer. When you remove the power cord, carry the printer, or stand it up, check that the POWER lamp is off. Important • If you repeatedly remove the power cord, carry the printer, or stand it up while the POWER lamp is on or flashing, this may cause the ink to leak or the printer to break. (The same problem is caused even if you use the optional portable kit.) For details on turning off the printer, see Turning off the printer.
Traveling Abroad with the Printer The universal AC adapter can be used abroad to power the printer from power supplies ranging from AC 100 V to 240 V. However, the specification of the power cord differs depending on the country or region of use. Before traveling abroad with the printer, ensure the followings. A: Power cord Please purchase a power cord that conforms to the specifications of the country or region of use. We recommend using a Canon genuine power cord.
Accessories The following accessories are available for this printer. Confirm the product names when you purchase the accessories. * Certain accessories may not be available in some countries or regions. • LK-62 This kit allows you to use the Canon printer in location where a power outlet is unavailable. The kit contains a battery pack and a battery attachment.
Specifications General Specifications Printing resolution (dpi) 9600* (horizontal) x 2400 (vertical) * Ink droplets can be placed with a pitch of 1/9600 inch at minimum. Interface USB Port: Hi-Speed USB *1 LAN Port: Wireless LAN: IEEE802.11n / IEEE802.11g / IEEE802.11b *2 *1 A computer that complies with Hi-Speed USB standard is required. Since the Hi-Speed USB interface is fully upwardly compatible with USB 1.1, it can be used at USB 1.1.
Print Head/Ink Total 1856 nozzles (PgBK 320 nozzles, Y/DyeBK each 256 nozzles, C/M each 512 nozzles) Network Specifications Communication protocol TCP/IP Wireless LAN Supported Standards: IEEE802.11n / IEEE802.11g / IEEE802.11b Frequency bandwidth: 2.4 GHz Channel: 1-11 or 1-13 * Frequency bandwidth and available channels differ depending on country or region. Communication distance: Indoors 164 feet/50 m * Effective range varies depending on the installation environment and location.
Hard Disk Space 1.5 GB Note: For bundled software installation. The necessary amount of hard disk space may be changed without notice. Display XGA 1024 x 768 Other Supported OS Some functions may not be available with each OS. Refer to the manual or the Canon web site for details on operation with iOS, Android, and Windows RT. Mobile Printing Capability Apple AirPrint Google Cloud Print PIXMA Cloud Link • An internet connection is required to view the Online Manual.
About the Administrator Password An administrator password "canon" is already specified for the printer at the time of purchase. Important • For security reasons, it is recommended to change the password before you use the printer. • You can change the password using one of the tools below. (Some tools may not be available depending on the printer you are using.
Printing Printing from a Computer Printing from a Digital Camera 233
Printing from a Computer Printing with Application Software that You are Using (Printer Driver) 234
Printing with Application Software that You are Using (Printer Driver) Printing with Easy Setup Basic Various Printing Methods Changing the Print Quality and Correcting Image Data Overview of the Printer Driver Updating the Printer Driver 235
Printing with Easy Setup The simple setup procedure for carrying out appropriate printing on this printer is as follows: 1. Check that the printer is turned on 2. Load paper on the printer 3. Select the printer Select your model from the Printer list in the Print Dialog. Note • Click Show Details ( (the disclosure triangle)) to switch the Setup window to the detailed display. 4. Select the paper size For Paper Size, select the paper size to be used.
5. Select Quality & Media from the pop-up menu 6. Select the media type For Media Type, select the same paper type loaded in the printer.
7. Select the print quality For Print Quality, select High, Standard, or Draft according to your purpose. Important • The print quality settings that can be selected may differ depending on a printing profile. 8. Complete the setup Click Print. When you execute print, the document will be printed in accordance with the type and size of the media.
Important • In the Presets section, click Save Current Settings as Preset... (Save As...) to register the specified settings.
Paper Settings on the Printer Driver When you use this printer, selecting a media type that matches the print purpose will help you achieve the best print results. You can use the following media types on this printer. Commercially available papers Media name Media Type in the printer driver Plain Paper (including recycled paper) Plain Paper Envelopes Envelope Canon genuine papers (Photo Printing) Media name
Various Printing Methods Setting the Number of Copies and Printing Order Setting the Stapling Margin Execute Borderless Printing Scaling the Printing to Fit the Paper Size Scaled Printing Page Layout Printing Printing on Postcards Displaying the Print Results before Printing Setting Paper Dimensions (Custom Size) 241
Setting the Number of Copies and Printing Order Collate pages + Reverse Collate pages + Normal Reverse The procedure for specifying the number of copies and printing order is as follows: 1. Specify the number of copies to be printed Specify the number of copies to print from the Copies in the Print Dialog. 2. Select Paper Handling from the pop-up menu 3.
5. Complete the setup Click Print. When you execute print, the specified number of copies will be printed with the specified printing order. Important • When the application software that you used to create the document has the same function, specify the settings on the printer driver. However, if the print results are not acceptable, specify the function settings on the application software.
Setting the Stapling Margin The procedure for setting the margin width and the staple side is as follows: 1. Select Margin from the pop-up menu on the Print Dialog 2. Set the margin width and the staple side If necessary, set the Margin width, and select a stapling position from the Stapling Side list. Note • The printer automatically reduces the print area depending on the staple position margin. 3. Complete the setup Click Print.
Execute Borderless Printing The borderless printing function allows you to print data without any margin by enlarging the data so that it extends slightly off the paper. In standard printing, margins are created around the document area. However, in borderless printing function, these margins are not created. When you want to print data such as a photo without providing any margin around it, set borderless printing.
Important • When the Amount of Extension slider is set to the rightmost position, the back side of the paper may become smudged. 4. Complete the setup Click Print. When you execute print, the data is printed without any margins on the paper. Important • Borderless printing only supports specific paper sizes. Make sure to select a paper size with the wording "(borderless)" from the Paper Size.
Important • When the amount of extension is decreased, an unexpected margin may be produced on the print, depending on the size of the paper. Note • When the Amount of Extension slider is set to the leftmost position, image data will be printed in the full size. If you set this when printing the address side of a postcard, the postal code of the sender is printed in the correct position.
Scaling the Printing to Fit the Paper Size The procedure for printing a document that is automatically enlarged or reduced to fit the page size to be used is as follows: 1. Check the paper size Check that the Paper Size in the Print Dialog is the same as the paper size that you set in the application software. 2. Select Paper Handling from the pop-up menu 3. Set the print paper size Check the Scale to fit paper size check box.
Click Print. When you execute print, the document will be enlarged or reduced to fit to the page size.
Scaled Printing The procedure for printing a document with pages enlarged or reduced is as follows: 1. Select the printer In the Page Setup Dialog, select your model name from the Format For list. 2. Set scaled printing Specify the scaling factor in the Scale box, and click OK. Note • Depending on the Scale value that you set, an error message may be displayed. 3. Complete the setup On the Print Dialog, click Print. When you execute print, the document will be printed with the specified scale.
Page Layout Printing The page layout printing function allows you to print more than one page image on a single sheet of paper. The procedure for performing page layout printing is as follows: 1. Select Layout from the pop-up menu in the Print Dialog 2. Set the number of original you print on one page In Pages per Sheet, specify the number of page you print on one page. 3. If necessary, set the following items Layout Direction To change the page placement order, select an icon from the list.
4. Complete the setup Click Print. When you execute print, the specified number of pages will be arranged on each sheet of paper in the specified order.
Printing on Postcards This section describes the procedure for postcard printing. 1. Load postcard on the printer 2. Select paper size in the Print Dialog Select Postcard or Postcard Double from the Paper Size menu. Important • Return postcards can be used only when you print them from the computer. • When printing a return postcard, always set the paper size to Postcard Double from your application software or the printer driver. • Do not fold the return postcard.
Displaying the Print Results before Printing If you are using Mac OS X v10.6.8, you can display and check the print result before printing. To display the print result before printing, click Preview on the Print Dialog. Note • When you click (the disclosure triangle) in the Print dialog and switch to the detailed display, Preview is not displayed. For detailed display, a preview is displayed on the left side of the Print dialog.
Setting Paper Dimensions (Custom Size) You can specify the height and width of paper when its size cannot be selected from the Paper Size menu. Such a paper size is called "custom size." The procedure for specifying a custom size is as follows: 1. Creating a new custom paper size In the Print Dialog, select Manage Custom Sizes... from Paper Size. In the Custom Paper Sizes dialog, click +. Untitled will be added to the list. 2.
Changing the Print Quality and Correcting Image Data Setting the Print Quality Level (Custom) Printing a Color Document in Monochrome Specifying Color Correction Optimal Photo Printing of Image Data Adjusting Colors with the Printer Driver Printing with ICC Profiles (Specifying an ICC Profile from the Application Software) Printing with ICC Profiles (Specifying an ICC Profile from the Printer Driver) Adjusting Color Balance Adjusting Brightness Adjusting Intensity Adjusting Contrast 256
Setting the Print Quality Level (Custom) The print quality level can be set in the Custom. The procedure for setting the print quality level is as follows: 1. Select Quality & Media from the pop-up menu on the Print Dialog 2. Select the print quality Select Custom for Print Quality. 3. Setting the print quality level Move the Quality slider to select the print quality level. 4. Complete the setup Click Print. When you execute print, the image data is printed with the selected print quality level.
Printing a Color Document in Monochrome The procedure for printing a color document in monochrome is as follows: 1. Select Quality & Media from the pop-up menu on the Print Dialog 2. Set grayscale printing Check the Grayscale Printing check box. 3. Complete the setup Click Print. When you execute print, the document is converted to grayscale data. It allows you to print the color document in monochrome. Note • During Grayscale Printing, inks other than black ink may be used as well.
Specifying Color Correction You can specify the color correction method suited to the type of document to be printed. Normally, the printer driver adjusts the colors by using Canon Digital Photo Color so that data is printed with color tints that most people prefer. When you want to print by using the color space (Adobe RGB or sRGB) of the image data effectively or by specifying a printing ICC profile from your application software, select ColorSync.
Printing with ICC Profiles (Specifying an ICC Profile from the Application Software) Printing with ICC Profiles (Specifying an ICC Profile from the Printer Driver) 260
Optimal Photo Printing of Image Data When people print images taken with digital cameras, they sometimes feel that the printed color tones differ from those of actual image or those displayed on the monitor. To get the print results as close as possible to the desired color tones, you must select a printing method that is best suited to the application software used or to your purpose. Color Management Devices such as digital cameras, scanners, monitors, and printers handle color differently.
Adjusting Colors with the Printer Driver You can specify the color correction function of the printer driver to print with color tints that most people prefer through the use of Canon Digital Photo Color. When printing from an application software that can identify ICC profiles and allows you to specify them, use a printing ICC profile in the application software, and select settings for color management. The procedure for adjusting colors with the printer driver is as follows: 1.
Printing with ICC Profiles (Specifying an ICC Profile from the Application Software) When you print from Adobe Photoshop, Canon Digital Photo Professional, or any application software that can identify input ICC profiles and allows you to specify such profiles, printer uses the color management system (ColorSync) built-into Mac OS when printing.
Adjusting Color Balance Adjusting Brightness Adjusting Intensity Adjusting Contrast 264
Printing with ICC Profiles (Specifying an ICC Profile from the Printer Driver) Print from an application software that cannot identify or specify input ICC profiles by using the color space of the input ICC profile (sRGB) found in the data. 1. Select Color Matching from the pop-up menu of the Print Dialog 2. Select color correction Select ColorSync. You can leave Profile set to Automatic.
Adjusting Color Balance You can adjust the color tints when printing. Since this function adjusts color balance of the output by changing the ink ratios of each color, it changes the total color balance of the document. Use the application software when you want to change the color balance significantly. Use the printer driver only when you want to adjust the color balance slightly.
Click Print. When you execute print, the document is printed with the adjusted color balance. Important • When the Grayscale Printing check box is checked for Quality & Media, the color balance (Cyan, Magenta, Yellow) appear grayed out and are unavailable. • If you select ColorSync for Color Matching, then the color balance (Cyan, Magenta, Yellow) appear grayed out and are unavailable.
Adjusting Brightness You can change the brightness of the overall image data during printing. This function does not change pure white or pure black but it changes the brightness of the intermediate colors. The following sample shows the print result when the brightness setting is changed. Light is selected Normal is selected Dark is selected The procedure for adjusting brightness is as follows: 1. Select Color Options from the pop-up menu of the Print Dialog 2.
Related Topics Setting the Print Quality Level (Custom) Specifying Color Correction Adjusting Color Balance Adjusting Intensity Adjusting Contrast 269
Adjusting Intensity You can dilute (brighten) or intensify (darken) the colors of the overall image data during printing. The following sample shows the case when the intensity is increased so that all colors become more intense when the image data is printed. No adjustment Higher intensity The procedure for adjusting intensity is as follows: 1. Select Color Options from the pop-up menu of the Print Dialog 2.
Related Topics Setting the Print Quality Level (Custom) Specifying Color Correction Adjusting Color Balance Adjusting Brightness Adjusting Contrast 271
Adjusting Contrast You can adjust the image contrast during printing. To make the differences between the light and dark portions of images greater and more distinct, increase the contrast. On the other hand, to make the differences between the light and dark portions of images smaller and less distinct, reduce the contrast. No adjustment Adjust the contrast The procedure for adjusting contrast is as follows: 1. Select Color Options from the pop-up menu of the Print Dialog 2.
Related Topics Setting the Print Quality Level (Custom) Specifying Color Correction Adjusting Color Balance Adjusting Brightness Adjusting Intensity 273
Overview of the Printer Driver Canon IJ Printer Driver How to Open the Printer Driver Setup Window Page Setup Dialog Print Dialog Quality & Media Color Options Borderless Printing Margin Canon IJ Printer Utility Opening the Canon IJ Printer Utility Maintenance of this Printer Display the Printing Status Screen Deleting the Undesired Print Job Instructions for Use (Printer Driver) 274
Canon IJ Printer Driver The Canon IJ printer driver (called printer driver below) is a software that is installed on your computer for printing data with this printer. The printer driver converts the print data created by your application software into data that your printer can understand, and sends the converted data to the printer. Because different models support different print data formats, you need a printer driver for the specific model you are using.
How to Open the Printer Driver Setup Window You can display the printer driver setup window from the application software you are using. Opening the Page Setup Dialog Use this procedure to set the page (paper) settings before printing. 1. Select Page Setup... from the File menu of the application software The Page Setup Dialog opens. Opening the Print Dialog Use this procedure to set the print settings before printing. 1. Select Print...
Page Setup Dialog In the Page Setup dialog, you configure the basic print settings such as the size of paper loaded in the printer or the scaling ratio. To open the Page Setup dialog, you typically select Page Setup... from the File menu of your application software. Settings Click the pop-up menu, and then select the following items: Page Attributes Set the paper size or scaled printing. Save as Default You can save the attributes of the displayed page as the default settings.
Print Dialog In the Print dialog, you can set paper type and print quality to start printing. To open the Print dialog, you typically select Print... from the File menu of your application software. Printer Select the model to be used for printing. When you click Add Printer..., a dialog for specifying the printer opens. Presets You can save or delete the settings of the Print dialog. Note • If you are using OS X Mavericks v10.9, OS X Mountain Lion v10.8, or OS X Lion v10.7, you can select Show Presets...
Layout You can set page layout printing. Use Reverse page orientation to change the paper orientation, and use Flip horizontally to print a mirror image of the document. Color Matching You can select the color correction method. Paper Handling You can set the pages to be printed on paper and the print order. Cover Page You can output cover pages both before and after a document. Scheduler You can set the print start time and print priorities.
Quality & Media This dialog allows you to create a basic print setup in accordance with the paper type. Unless special printing is required, normal printing can be performed just by setting the items in this dialog. Media Type Select the type of media to be used. You must select the type of media actually loaded in the printer. This selection enables the printer to carry out printing properly for the material of the media used. Paper Source Shows the source from which paper is supplied.
Related Topics Setting the Print Quality Level (Custom) Printing a Color Document in Monochrome 281
Color Options This dialog allows you to adjust the print color as you like. If the color of the printed image is not as expected, adjust the properties in the dialog and retry printing. The adjustments made here do not affect the colors of the original print data unlike application software dedicated to image processing. Use this dialog just to make fine adjustments. Preview Shows the effect of color adjustment. As you adjust each item, the effects are reflected in the color and brightness.
Brightness Select the brightness of printed images. You cannot change the levels of pure white and black. You can change the contrast of the colors between white and black. Intensity Select this method to adjust the overall density of your print. To increase the overall intensity, drag the slider to the right. To decrease the overall intensity, drag the slider to the left. You can also directly enter a value linked to the slider. Enter a value in the range from -50 to 50.
Borderless Printing This dialog allows you to adjust the amount of the document that extends off the paper when borderless printing is performed. Amount of Extension Use the Amount of Extension slider to adjust the amount of the document that extends off the paper. Moving the slider to the right makes the amount larger and moving the slider to the left makes the amount smaller.
Margin This dialog allows you to set the stapling side and amount of margin for stapling multiple sheets of paper. Margin Specify the amount of margin space for stapling the paper. Enter a value between 0 inches (0 mm) to 1.2 inches (30 mm). Stapling Side Specify the stapling side. Long-side stapling (Left) / Long-side stapling (Right) Select this option to staple the long side of the paper. Choose left or right.
Canon IJ Printer Utility The Canon IJ Printer Utility allows you to perform printer maintenance or change the settings of the printer. What You Can Do with the Canon IJ Printer Utility You can switch between pages in Canon IJ Printer Utility by the pop-up menu. You can choose one of the following items from the pop-up menu. Cleaning Clean the printer to prevent print smudges and clear up clogged print head nozzle.
Related Topics Cleaning the Print Heads from Your Computer Cleaning Inside the Printer Cleaning the Paper Feed Rollers from Your Computer Use Your Computer to Print a Nozzle Check Pattern Aligning the Print Head Position from Your Computer Checking the Ink Status from Your Computer Checking the Current Battery Level Managing the Printer Power Reducing the Printer Noise Changing the Printer Operation Mode 287
Opening the Canon IJ Printer Utility To open the Canon IJ Printer Utility, follow the steps below. 1. Open System Preferences, and select Printers & Scanners (Print & Scan or Print & Fax) 2. Start the Canon IJ Printer Utility Select your model from the printer list, and click Options & Supplies.... Click Open Printer Utility in Utility tab. Canon IJ Printer Utility is launched.
Maintenance of this Printer Cleaning the Print Heads from Your Computer Cleaning Inside the Printer Cleaning the Paper Feed Rollers from Your Computer Use Your Computer to Print a Nozzle Check Pattern Aligning the Print Head Position from Your Computer Checking the Ink Status from Your Computer Checking the Current Battery Level Managing the Printer Power Reducing the Printer Noise Changing the Printer Operation Mode 289
Display the Printing Status Screen Check the print progress according to the following procedure: 1. Launch the printing status screen • If the print data has been sent to the printer The printing status screen opens automatically. To display the printing status screen, click the (the printer icon) displayed on the Dock. • If the print data has not been sent to the printer Open System Preferences, and select Printers & Scanners (Print & Scan or Print & Fax).
Deletes the specified print job. Stops printing the specified document. Resumes printing the specified document. Displays the print job information. Stops printing all documents. Displayed only when printing of all documents is being stopped, and resumes printing all documents.
Deleting the Undesired Print Job If the printer does not start printing, canceled or failed print job data may be remaining. Delete unnecessary print jobs from the print status check screen. 1. Open System Preferences, and select Printers & Scanners (Print & Scan or Print & Fax) 2. Select your model, and then click Open Print Queue... The print status check screen appears. 3. Select the unnecessary print job and click ( The selected print jobs will be deleted.
Instructions for Use (Printer Driver) This printer driver is subject to the following restrictions. Keep the following points in mind when using the printer driver. Restrictions on the Printer Driver • When you set up the Page Setup dialog, be sure to begin by selecting the model you are using from the Format For list. If you select another printer, printing may not be performed properly.
Updating the Printer Driver Obtaining the Latest Printer Driver Delete the Unnecessary Canon IJ Printer from the Printer List Before Installing the Printer Driver Installing the Printer Driver 294
Obtaining the Latest Printer Driver By updating the printer driver to the latest version of the printer driver, unresolved problems may be solved. You can access our website and download the latest printer driver for your model. Important • You can download the printer driver for free, but any Internet access charges incurred are your responsibility.
Delete the Unnecessary Canon IJ Printer from the Printer List A Canon IJ Printer that you no longer use can be deleted from the printer list. Before deleting the Canon IJ Printer, disconnect the cable that connects the printer to the computer. The procedure to delete the unnecessary Canon IJ Printer from the printer list is as follows: You cannot delete the Canon IJ Printer unless you are logged in as a user with the administrative right.
Before Installing the Printer Driver This section describes the items that you should check before installing the printer driver. You should also refer to this section if the printer driver cannot be installed. Checking the Personal Computer Settings • Terminate all running applications. • Log on as a user who has the administrator account. The installer will prompt you to enter the name and password of the administrative user.
Installing the Printer Driver You can access our web site through the Internet and download the latest printer driver for your model. The procedure for installing the downloaded printer driver is as follows: 1. Mount the disk Double-click the disk image file you have downloaded. The file is unpacked, and then the disk is mounted. 2. Start the installer Double-click "PrinterDriver_XXX_YYY.pkg" (where "XXX" is your model name, and "YYY" is version) contained in the disk. 3.
Printing from a Digital Camera Printing Photographs Directly from a PictBridge (Wireless LAN) Compliant Device About PictBridge (Wireless LAN) Print Settings 299
Printing Photographs Directly from a PictBridge (Wireless LAN) Compliant Device You can connect a PictBridge (Wireless LAN) compliant device such as a digital camera, camcorder, or mobile phone to the printer through wireless LAN, and print recorded images directly without using a computer. Connectable devices: PictBridge (Wireless LAN) compliant device Printable image data format: The printer accepts images* taken with a camera compliant with the Design rule for Camera File system and PNG files. * Exif 2.
You can perform settings using the menu on the LCD of your PictBridge (Wireless LAN) compliant device. Select the size and type of paper that you loaded in the printer. Settings on a PictBridge (Wireless LAN) Compliant Device 5. Start printing from your PictBridge (Wireless LAN) compliant device.
About PictBridge (Wireless LAN) Print Settings Settings on a PictBridge (Wireless LAN) Compliant Device This section describes the PictBridge (Wireless LAN) function of the printer. For the print settings on a PictBridge (Wireless LAN) compliant device, refer to the instructions given in the device's instruction manual. Note • In the following description, names of setting items are given according to those used in Canon-brand PictBridge (Wireless LAN) compliant devices.
Print date & file no. Default (Off: No printing), Date, File No., Both, Off Image optimize Default (Auto photo fix)*1, On (Auto photo fix)*1, Off, Red-Eye*2 *1 The scene or person's face of a shot photo is recognized and the most suitable correction for each photo is made automatically. It makes a darkened face by backlight brighter to print. It also analyzes a scene such as scenery, night scene, person, etc.
Troubleshooting Frequently Asked Questions Connecting Computer or Smartphone to Printer Directly via Wireless LAN (Access Point Mode) Changing Printer Setting to Use Wireless LAN via Wireless LAN Router The Printer Cannot Be Powered On Printing Does Not Start Paper Does Not Feed Properly/"No Paper" Error Occurs Print Results Not Satisfactory Ink Is Not Ejected Paper Jams If an Error Occurs Search Each Function Problems with Network Communication Problems with Printing Problems with Printing Quality Problem
Problems with Network Communication Problems with the Printer While Using with Network Cannot Detect a Printer on a Network Other Problems with Network 305
Problems with the Printer While Using with Network The Printer Stopped Working Suddenly Printing Speed Is Slow Cannot Use the Printer on Replacing an Access Point or Changing Its settings 306
The Printer Stopped Working Suddenly Cannot Communicate with the Printer over the Wireless LAN Cannot Communicate with the Printer Using the Access Point Mode Cannot Print from a Computer Connected to the Network Cannot Communicate with the Printer over the Wireless LAN Check1 Make sure that the printer is turned on. Make sure that the network settings in the printer are identical with those of the access point.
Check10 Make sure that the firewall of the security software is disabled. If the firewall function of your security software is turned on, a message may appear warning that Canon software is attempting to access the network. If the warning message appears, set the security software to always allow access. If using any programs that switch the network environment, check their settings. Some programs will enable a firewall by default.
Check8 Are you trying to connect 6 devices or more? You can connect up to 5 devices using the access point mode. Cannot Print from a Computer Connected to the Network Check1 Make sure that the network settings of the computer are correct. For the procedures to set up the computer, refer to the instruction manual of your computer or contact its manufacturer. Check2 If the printer driver is not installed, install it. Install the printer driver from our website.
Printing Speed Is Slow Check1 The printer may be printing out a large job issued from another computer. Make sure that the radio status is good and adjust the installation positions while monitoring the radio status with IJ Network Tool. Check2 Monitoring Wireless Network Status Make sure that there is no barrier or obstacle between the access point and the printer. Wireless communication between different rooms or floors is generally poor.
Cannot Use the Printer on Replacing an Access Point or Changing Its settings When you replace an access point, perform network setup of the printer again. Perform network setup again according to the instructions on our website. If the problem is not resolved, see below.
Cannot Detect a Printer on a Network Cannot Detect the Printer When Setting up Network Communication The Printer Cannot Be Detected in the Wireless LAN 312
Cannot Detect the Printer When Setting up Network Communication If the printer could not be detected on the network when setting up the network communication, confirm the network settings before redetecting the printer. Cannot Detect the Printer during Wireless LAN Setup: Check 1 Important • If the printer cannot be detected while you are setting up the network communication using a USB cable, the printer may be in the access point mode.
Cannot Detect the Printer during Wireless LAN Setup: Check 1 Are the computer and network device (router, access point, etc.) configured and can the computer connect to the network? Make sure that you can view web pages on your computer. If you cannot view any web pages: Configure the computer and network device. For the procedures, refer to the instruction manuals supplied with the computer and network device, or contact their manufacturers.
Cannot Detect the Printer during Wireless LAN Setup: Check 2 Does the firewall function of your security software or operation system for computer interfere with setting up the network communication? The firewall function of your security software or operation system for computer may limit communications between the printer and your computer. Confirm the setting of firewall function of your security software or operation system or the message appearing on your computer.
Cannot Detect the Printer during Wireless LAN Setup: Check 3 Check the settings of the access point. Check the settings of the access point for the network connection such as IP address filtering, MAC address filtering, or DHCP function. Make sure that the radio channel of the access point and that assigned to the printer are the same. For details on how to check the settings of the access point, refer to the instruction manual supplied with the access point or contact its manufacturer.
The Printer Cannot Be Detected in the Wireless LAN Check1 Make sure that the printer is turned on. Check2 Make sure that the Wi-Fi lamp is lit on the printer. If the Wi-Fi lamp is off, the wireless LAN is disabled. To enable wireless LAN, press and hold the RESUME/CANCEL button, then release the button when the POWER lamp flashes 10 times. Wireless LAN is enabled and the Wi-Fi lamp is lit.
If the firewall function of your security software is turned on, a message may appear warning that Canon software is attempting to access the network. If the warning message appears, set the security software to always allow access. If using any programs that switch the network environment, check their settings. Some programs will enable a firewall by default. When using a router, connect the printer and computer to the LAN side (same network segment).
Other Problems with Network Forgot an Access Point Name, SSID, or a Network Key The Message Is Displayed on the Computer Screen During Setup The Administrator Password Set to the Printer Was Forgotten Checking Information about the Network How to Restore the Printer's Network Settings to Factory Default 319
Forgot an Access Point Name, SSID, or a Network Key Cannot Connect with an Access Point to Which a WEP or WPA/WPA2 Key Is Set (You Forgot the WEP or WPA/WPA2 Key) How to Set an Encryption Key Cannot Connect with an Access Point to Which a WEP or WPA/WPA2 Key Is Set (You Forgot the WEP or WPA/WPA2 Key) For information on how to set up the access point, refer to the instruction manual provided with the access point or contact its manufacturer.
Enter the passphrase configured on the access point (a sequence of between 8 and 63 alphanumeric characters, or a 64-character hexadecimal number). Either TKIP (basic encryption) or AES (secure encryption) is selected automatically for the dynamic encryption method. For details, see Changing the WPA/WPA2 Detailed Settings. Note • This printer supports WPA/WPA2-PSK (WPA/WPA2-Personal) and WPA2-PSK (WPA2Personal).
The Message Is Displayed on the Computer Screen During Setup The Enter Password Screen Is Displayed During Setup The Screen for Setting the Encryption Is Displayed After Selecting the Access Point in the Access Points Screen "You are connecting the machine to the non encrypted wireless network" Is Displayed The Enter Password Screen Is Displayed During Setup The following screen is displayed if an administrator password is set to the printer which has already been set up to use via a network.
The Administrator Password Set to the Printer Was Forgotten Initialize the printer settings. Initializing the Printer Settings After initializing the printer settings, perform setup according to the instructions on our website.
Checking Information about the Network Checking the IP Address or the MAC Address of the Printer Checking the IP Address or the MAC Address of the Computer Checking If the Computer and the Printer, or Computer and the Access Point Can Communicate Checking the Network Setting Information Checking the IP Address or the MAC Address of the Printer To check the IP address or the MAC address of the printer, print out the network setting information.
2. Start Network Utility. 3. Click the Ping button. 4. Make sure that Send only XX pings (XX are numbers) is selected. 5. Enter the IP address of the target printer or the target access point in Enter the network address to ping.. 6. Click Ping. "XXX.XXX.XXX.XXX" is the IP address of the target device. A message such as the following is displayed. 64 bytes from XXX.XXX.XXX.XXX: icmp_seq=0 ttl=64 time=3.394 ms 64 bytes from XXX.XXX.XXX.XXX: icmp_seq=1 ttl=64 time=1.786 ms 64 bytes from XXX.XXX.XXX.
How to Restore the Printer's Network Settings to Factory Default Important • Note that initialization erases all network settings on the printer, and printing operation from a computer over network may become impossible. To use the printer over network, perform setup according to the instructions on our website. Press and hold the RESUME/CANCEL button, then release the button when the POWER lamp flashes 9 times. The network settings are initialized.
Problems with Printing Printing Does Not Start Paper Jams Paper Does Not Feed Properly/"No Paper" Error Occurs Printing Stops Before It Is Completed 327
Printing Does Not Start Make sure that the power plug is securely plugged in, then press the ON button to turn the printer on. Check1 If you use a battery, make sure that it is charged, then press the ON button to turn the printer on. For details on how to check it, refer to the battery's instruction manual. While the POWER lamp is flashing, the printer is initializing. Wait until the POWER lamp stops flashing and remains lit.
Paper Jams When paper is jammed, the Alarm lamp flashes and a troubleshooting message is displayed on the computer screen automatically. Take the appropriate action described in the message. Watch the movie * The screen differs depending on the OS you are using. For details on how to remove the jammed paper, refer to Support Code List (When Paper Is Jammed). Note • You can confirm the actions against errors with Support Codes on your computer by searching a Support Code.
Paper Does Not Feed Properly/"No Paper" Error Occurs Check1 Make sure that paper is loaded. Loading Paper Check2 Make sure of the following when you load paper. • When loading two or more sheets of paper, flip through the paper before loading. • When loading two or more sheets of paper, align the edges of the sheets before loading. • When loading two or more sheets of paper, make sure that the paper stack does not exceed the paper load limit.
If the paper tears in the rear tray, see Paper Jams to remove it. If there are any foreign objects in the rear tray, be sure to turn off the printer, unplug it from the power supply, then remove the foreign object. If you use a battery, turn off the printer, detach the battery, then remove the foreign object. Check7 Clean the paper feed roller. Cleaning the Paper Feed Roller Note • Cleaning the paper feed roller will wear the roller, so perform this procedure only when necessary.
Printing Stops Before It Is Completed Check1 Is the paper loaded? Make sure that paper is loaded. If the printer has run out of paper, load paper. Check2 Do the printing documents have lots of photographs or illustrations? As printing large data such as photos or graphics takes time for the printer and the computer to process, the printer may appear to have stopped operating. In addition, when printing data that uses a large amount of ink continuously on plain paper, the printer may pause temporarily.
Problems with Printing Quality Print Results Not Satisfactory Ink Is Not Ejected 333
Print Results Not Satisfactory If the print result is not satisfactory due to white streaks, misaligned lines, or uneven colors, confirm the paper and print quality settings first. Check1 Do the page size and media type settings match the size and type of the loaded paper? When these settings are incorrect, you cannot obtain a proper print result. If you are printing a photograph or an illustration, incorrect paper type settings may reduce the quality of the printout color.
Cannot Print to End of Job Check Is the space of your computer's hard disk sufficient? Delete unnecessary files to free disk space.
No Printing Results/Printing Is Blurred/Colors Are Wrong/White Streaks No Printing Results Printing Is Blurred Colors Are Wrong White Streaks Watch the movie 336
Check1 Did you confirm the paper and print quality settings? Print Results Not Satisfactory Print the Nozzle Check Pattern and perform any necessary maintenance operations such as Print Head Cleaning. Check2 Print the Nozzle Check Pattern to determine whether the ink ejects properly from the print head nozzles. Refer to When Printing Becomes Faint or Colors Are Incorrect for the Nozzle Check Pattern printing, Print Head Cleaning, and Print Head Deep Cleaning.
Lines Are Misaligned Check1 Did you confirm the paper and print quality settings? Print Results Not Satisfactory Check2 Perform Print Head Alignment. If printed lines are misaligned or print results are otherwise unsatisfactory, adjust the print head position. Aligning the Print Head Note • If the problem is not resolved after performing the Print Head Alignment, perform Print Head Alignment manually referring to Aligning the Print Head Position from Your Computer.
Printed Paper Curls or Has Ink Blots Printed Paper Has Ink Blots Printed Paper Curls Check1 Did you confirm the paper and print quality settings? Print Results Not Satisfactory Check2 If the intensity is set high, reduce the intensity setting and try printing again. If you are using plain paper to print images with high intensity, the paper may absorb too much ink and become wavy, causing paper abrasion. You can confirm the intensity using the printer driver.
Paper Is Smudged/Printed Surface Is Scratched Paper Is Smudged The Edges of Paper Are Smudged Printed Surface Is Smudged Printed Surface Is Scratched Check1 Did you confirm the paper and print quality settings? Print Results Not Satisfactory Check2 Is the appropriate type of paper used? Check the followings: • Check to see if the paper you are printing on is suitable for your printing purpose.
1. Roll up the paper in the opposite direction to the paper curl as shown below. 2. Check that the paper is now flat. We recommend printing curl-corrected paper one sheet at a time. Note • Depending on the media type, the paper may be smudged or may not be fed properly even if it is not curled inward. In such cases, follow the procedure described below to curl the paper outward within 0.1 inch / 3 mm (B) in height before printing. This may improve the print result.
Reset the paper thickness lever to the right when you finish printing. If the paper thickness lever is not set back to the right, the inside of the printer is more likely to get dirty due to the wider clearance between the print head and the loaded paper. It may also reduce print quality. Check5 If the intensity is set high, reduce the intensity setting and try printing again.
Back of the Paper Is Smudged Check1 Did you confirm the paper and print quality settings? Print Results Not Satisfactory Check2 Perform the Bottom Plate Cleaning to clean the inside of the printer. Cleaning the Inside of the Printer (Bottom Plate Cleaning) Note • When performing borderless printing, duplex printing, or too much printing, the inside may become stained with ink.
Colors Are Uneven or Streaked Colors Are Uneven Colors Are Streaked Watch the movie Check1 Did you confirm the paper and print quality settings? Print Results Not Satisfactory Print the Nozzle Check Pattern and perform any necessary maintenance operations such as Print Head Cleaning. Check2 Print the Nozzle Check Pattern to determine whether the ink ejects properly from the print head nozzles.
• If the problem is not resolved after performing the Print Head Deep Cleaning twice: If Print Head Deep Cleaning does not resolve the problem, the print head may be damaged. Contact the service center. Check3 Perform Print Head Alignment. Aligning the Print Head Note • If the problem is not resolved after performing the Print Head Alignment, perform Print Head Alignment manually referring to Aligning the Print Head Position from Your Computer.
Ink Is Not Ejected Check1 Has the ink run out? Open the print head cover, then check the status of ink lamp. Checking the Ink Status Check2 Are the print head nozzles clogged? Print the Nozzle Check Pattern to determine whether the ink ejects properly from the print head nozzles. Refer to When Printing Becomes Faint or Colors Are Incorrect for the Nozzle Check Pattern printing, Print Head Cleaning, and Print Head Deep Cleaning.
Problems with the Printer The Printer Cannot Be Powered On The Printer Turns Off Unintentionally Cannot Connect to Computer with a USB Cable Properly Cannot Communicate with the Printer with USB Connection Print Head Holder Does Not Move to the Position for Replacing 347
The Printer Cannot Be Powered On Check1 Press the ON button. Make sure that the power plug is securely plugged into the power cord connector of the printer, then turn it back on. Check2 Unplug the printer from the power supply, then plug the printer back in and turn the printer back on after leaving it for at least 2 minutes. Check3 Check4 If you use a battery, check the remaining level of the battery. For details on how to check it, refer to the battery's instruction manual.
The Printer Turns Off Unintentionally Check Deactivate the setting to turn the unit off automatically. The printer turns off automatically according to the elapsed time you specified if you activate the setting to turn the unit off automatically. If you do not want the printer to turn off automatically, open Canon IJ Printer Utility, select Power Settings in the pop-up menu, then select Disable for Using AC Adapter: in Auto Power Off on Auto Power.
Cannot Connect to Computer with a USB Cable Properly Printing Speed Is Slow/Hi-Speed USB Connection Does Not Work If your system environment is not fully compatible with Hi-Speed USB, the printer will operate at a lower speed provided under USB 1.1. In this case, the printer operates properly but printing speed may slow down due to communication speed. Check the following to make sure that your system environment supports HiSpeed USB connection.
Cannot Communicate with the Printer with USB Connection Check1 Make sure that the printer is turned on. Check2 Make sure that the USB cable is connected properly. See Connecting the Printer to the Computer Using a USB Cable to connect the USB cable properly. Check3 Do not start up IJ Network Tool while printing. Check4 Do not print while IJ Network Tool is running.
Print Head Holder Does Not Move to the Position for Replacing Check1 Is the POWER lamp off? Check if the POWER lamp is lit. The print head holder will not move unless the power is on. If the POWER lamp is off, close the print head cover and turn the printer on. Check2 Is the Alarm lamp flashing? Close the print head cover, confirm the number of times the Alarm lamp is flashing, take the appropriate action to resolve the error, and then reopen it.
Problems with Installation/Downloading Cannot Install the Printer Driver Uninstalling IJ Network Tool 353
Cannot Install the Printer Driver Download the driver from the support page of our website, then reinstall it.
Uninstalling IJ Network Tool Follow the procedure below to uninstall IJ Network Tool from your computer. Important • Even if IJ Network Tool is uninstalled, you can print over network. However, you cannot change the network settings over network. 1. Select Applications from the Go menu of Finder, double-click Canon Utilities > IJ Network Tool, drag the Canon IJ Network Tool icon into the Trash. 2. Restart the computer. Empty the Trash and restart your computer.
About Errors/Messages Displayed If an Error Occurs A Message Is Displayed Error Message Appears on a PictBridge (Wireless LAN) Compliant Device 356
If an Error Occurs When an error occurs in printing such as the printer is out of paper or paper is jammed, a troubleshooting message is displayed automatically. Take the appropriate action described in the message. When an error occurs, the Alarm lamp flashes and a Support Code (error number) is displayed on the computer screen. For some errors, the POWER lamp and the Alarm lamp flashes alternately. Check the status of the lamps and the message, then take the appropriate action to resolve the error.
15 flashes The ink tank cannot be recognized. 1410, 1411 17 flashes The ink has run out. (The lamp on the ink tank flashes.) 1688 18 flashes The remaining ink level cannot be correctly detected. 1689 21 flashes The printer cannot detect the paper size. 2103 Support Code Corresponding to the Number of Alternate Flashes of the POWER Lamp and the Alarm Lamp Example of 2 times flashing: (A) Flashes (B) Goes off Number of flashes Cause Support Code 2 flashes Printer error has occurred.
* The screen differs depending on the OS you are using. Note • You can confirm the actions against errors with Support Codes on your computer by searching a Support Code. Click Here to Search For details on how to resolve errors without Support Codes, see A Message Is Displayed.
A Message Is Displayed This section describes some of the errors or messages. Note • A Support Code (error number) is displayed on the computer for some error or message. For details on errors with Support Codes, refer to Support Code List. The Inkjet Printer/Scanner/Fax Extended Survey Program Icon Appears If the Inkjet Printer/Scanner/Fax Extended Survey Program is installed, the printer and application software usage information is scheduled to be sent every month for about ten years.
• If you do not agree to participate in the survey program: Click Do not agree. The confirmation screen will be closed, and the survey at that time is skipped. The confirmation screen will be displayed again one month later. • To stop sending the information: Click Turn off. The Inkjet Printer/Scanner/Fax Extended Survey Program is stopped, and the information will not be sent. To resume the survey, see Changing the setting:. • To uninstall the Inkjet Printer/Scanner/Fax Extended Survey Program: 1.
Error Message Appears on a PictBridge (Wireless LAN) Compliant Device The following are the possible errors that may occur when printing directly from a PictBridge (Wireless LAN) compliant device and the countermeasures to clear them. Note • This section describes errors that are indicated on Canon-brand PictBridge (Wireless LAN) compliant devices. The error messages and operations may vary depending on the device you are using.
"Waste tank full"/"Ink absorber full" The ink absorber is nearly full. Check the number of how many the Alarm lamp flashes and take the appropriate action to resolve the error. If an Error Occurs "No ink"/"Ink cassette error" Check the number of how many the Alarm lamp flashes and take the appropriate action to resolve the error. If an Error Occurs "Hardware Error" Check the number of how many the Alarm lamp flashes and take the appropriate action to resolve the error.
If You Cannot Resolve the Problem If you cannot resolve the problem with any of the workarounds in this chapter, please contact the seller of the printer or the service center. Canon support staff are trained to be able to provide technical support to satisfy customers. Caution • If the printer emits any unusual sound, smoke, or odor, turn it off immediately. Unplug the power cord from the outlet and contact the seller or the service center. Never attempt to repair or disassemble the printer yourself.
Support Code List The support code appears on the computer screen when an error occurs. "Support Code" means the error number and appears with an error message. When an error occurs, check the support code displayed on the computer screen and take the appropriate action.
Support Code List (When Paper Is Jammed) If the paper is jammed, remove it following the procedure appropriate for each case.
1300 Cause Paper is jammed in the paper output slot or in the rear tray. Action Remove the jammed paper following the procedure below. Watch the movie (Windows) Watch the movie (Mac) Note • If you need to turn off the printer to remove jammed paper during printing, press the RESUME/ CANCEL button to cancel print jobs before turning off the printer. 1. Pull the paper out slowly, either from the rear tray or from the paper output slot, whichever is easier.
• We recommend you use paper other than A5 sized one to print documents with photos or graphics; otherwise, the printout may curl and cause paper exit jams. If you cannot remove the paper or the paper tears inside the printer, or if the paper jam error continues after removing the paper, contact the service center.
Paper Is Jammed inside the Printer If the jammed paper tears and you cannot remove the paper either from the paper output slot or from the rear tray, or if the jammed paper remains inside the printer, remove the paper following the procedure below. Watch the movie (Windows) Watch the movie (Mac) Note • If you need to turn off the printer to remove jammed paper during printing, press the RESUME/CANCEL button to cancel print jobs before turning off the printer. 1.
4. Hold the jammed paper with your hands. If the paper is rolled up, pull it out. 5. Pull the paper slowly not to tear it, then pull the paper out. Keep an angle of the paper about 45 degrees and pull it slowly. 6. Make sure that all the jammed paper is removed. If the paper is torn, a piece of paper may remain inside the printer. Check the following and remove the piece of paper if it remains.
7. Close the print head cover. All print jobs in the queue are canceled. Reprint if necessary. Note • When reloading the paper, confirm that you are using the paper suited for printing and are loading it correctly. If the message about paper jam is displayed on the computer screen when you resume printing after removing all the jammed paper, a piece of paper may remain inside the printer. In this case, confirm that no piece of paper remains inside the printer.
In Other Cases Make sure of the following: Check1 Are there any foreign objects around the paper output slot? Check2 Are there any foreign objects in the rear tray? If there are any foreign objects in the rear tray, be sure to turn off the printer, unplug it from the power supply, then remove the foreign object. If you use a battery, turn off the printer, detach the battery, then remove the foreign object. Check3 Is the paper curled? Load the paper after correcting its curl.
1000 Cause There is no paper in the rear tray. Action Load paper in the rear tray and press the printer's RESUME/CANCEL button.
1200 Cause The print head cover is open. Action Close the print head cover and wait for a while. Do not close it while you are replacing an ink tank. Important • When you replace the ink tank, do not touch the print head lock lever.
1401 Cause The print head is not installed. Action Install the print head. If the print head is already installed, remove the print head once and then reinstall it. If the error is still not resolved, the print head may be damaged. Contact the service center.
1403 Cause The print head may be damaged. Action Contact the service center.
1405 Cause The print head may be damaged. Action Contact the service center.
1410 Cause The ink tank cannot be recognized. Action Open the print head cover and check that the ink tank which lamp is off is installed properly. If the front (innermost) part of the ink tank is sticking up, push down on the "Canon" logo on the ink tank to install it properly. If the ink lamp is off even though the ink tank is installed properly, replace the ink tank.
1411 Cause The ink tank cannot be recognized. Action Open the print head cover and check that the ink tank which lamp is off is installed properly. If the front (innermost) part of the ink tank is sticking up, push down on the "Canon" logo on the ink tank to install it properly. If the ink lamp is off even though the ink tank is installed properly, replace the ink tank.
1600 Cause If the lamp on the ink tank is flashing, ink may have run out. Action Replacing the ink tank is recommended. If printing is in progress and you want to continue printing, press the printer's RESUME/CANCEL button with the ink tank installed. Then printing can continue. Replacing the ink tank is recommended after the printing. The printer may be damaged if printing is continued under the ink out condition. Note • If multiple ink lamps are flashing red, check the status of each ink tank.
1660 Cause The ink tank is not installed. Action Install the ink tank.
1681 Cause More than one ink tanks of the same color are installed. (The lamp on the ink tank flashes.) Action Confirm that the ink tanks are installed in the appropriate positions.
1687 Cause The print head lock lever is not locked or an ink tank is installed improperly. Action Open the print head cover, then take the corresponding actions below. • Make sure that the ink tank is installed properly. Push the ink tank until it clicks into place. If the front (innermost) part of the ink tank is sticking up, push down on the "Canon" logo on the ink tank. • There are the right and left tabs on the print head lock lever.
1688 Cause Ink has run out. (The lamp on the ink tank flashes.) Action Replace the ink tank and close the print head cover. Printing under the current condition may damage the printer. If you want to continue printing in this condition, you need to release the function for detecting the remaining ink level. Press and hold the printer's RESUME/CANCEL button for at least 5 seconds, and then release it. With this operation, releasing the function for detecting the remaining ink level is memorized.
1689 Cause The remaining ink level cannot be correctly detected. Action Replace the ink tank and close the print head cover. Printing with an ink tank that was once empty may damage the printer. If you want to continue printing in this condition, you need to release the function for detecting the remaining ink level. Press and hold the printer's RESUME/CANCEL button for at least 5 seconds, and then release it. With this operation, releasing the function for detecting the remaining ink level is memorized.
1700 Cause The ink absorber is almost full. Action Press the printer's RESUME/CANCEL button to continue printing. Contact the service center.
1701 Cause The ink absorber is almost full. Action Press the printer's RESUME/CANCEL button to continue printing. Contact the service center.
1810 Cause Battery has exhausted. Action If printing is in progress, cancel printing. Turn off the printer, then either change to a fully charged battery pack or detach the battery attachment and connect the supplied AC adapter to the printer.
2100 Cause The paper size in the print settings and the size of the loaded paper do not match. Action Check the print settings and the loaded paper, load paper of the correct size, then press the printer's RESUME/CANCEL button. If you want to cancel printing, press the printer's RESUME/CANCEL button again while the POWER lamp is flashing.
2101 Cause The paper size in the print settings and the size of the loaded paper do not match. Action Check the print settings and the loaded paper, load paper of the correct size, then press the printer's RESUME/CANCEL button. If you want to cancel printing, press the printer's RESUME/CANCEL button again while the POWER lamp is flashing.
2103 Cause The printer cannot detect the paper size. Action Press the printer's RESUME/CANCEL button to dismiss the error, then try to print again. If this error still occurs even after printing again, set the printer not to detect the paper width by using the printer driver or Remote UI. Note • Depending on the type of paper, the printer may not detect the paper width. Additionally, if the print head cover is opened while printing is in progress, the printer may not detect the paper width.
2500 Cause The cause of following may have occurred the failure of Automatic Print Head Alignment. • Print head nozzles are clogged. • The paper of size other than A4 or Letter is loaded. • The paper output slot is exposed to strong light. Action Press the printer's RESUME/CANCEL button to dismiss the error, then take the actions described below. • Print the nozzle check pattern to check the status of the print head.
4103 Cause Cannot perform printing with the current print settings. Action Press the printer's RESUME/CANCEL button, to cancel printing. Then change the print settings and print again.
5100 Cause Printer error has occurred. Action Cancel printing and turn off the printer. Then confirm the following. • Confirm that there are no materials (e.g. jammed paper) that is preventing the print head holder from moving. If any, remove the materials. • Confirm that The print head lock lever is locked securely. Push the right and left tabs of the print head lock lever until each clicks into place. • Confirm that the ink tanks are installed properly. Push an ink tank until it clicks into place.
5200 Cause Printer error has occurred. Action Turn off the printer, and unplug the power cord of the printer from the power supply. If you use a battery, turn off the printer, then detach the battery. Plug the printer back in or attach the battery, then turn the printer back on. If the problem is not resolved, contact the service center.
5400 Cause Printer error has occurred. Action Turn off the printer, and unplug the power cord of the printer from the power supply. If you use a battery, turn off the printer, then detach the battery. Plug the printer back in or attach the battery, then turn the printer back on. If the problem is not resolved, contact the service center.
5700 Cause Printer error has occurred. Action Turn off the printer, and unplug the power cord of the printer from the power supply. If you use a battery, turn off the printer, then detach the battery. Plug the printer back in or attach the battery, then turn the printer back on. If the problem is not resolved, contact the service center.
5B00 Cause Printer error has occurred. Action Contact the service center.
5B01 Cause Printer error has occurred. Action Contact the service center.
5C00 Cause Printer error has occurred. Action Turn off the printer, and unplug the power cord of the printer from the power supply. If you use a battery, turn off the printer, then detach the battery. Plug the printer back in or attach the battery, then turn the printer back on. If the problem is not resolved, contact the service center.
6000 Cause Printer error has occurred. Action Turn off the printer, and unplug the power cord of the printer from the power supply. If you use a battery, turn off the printer, then detach the battery. Plug the printer back in or attach the battery, then turn the printer back on. If the problem is not resolved, contact the service center.
6500 Cause Printer error has occurred. Action Turn off the printer, and unplug the power cord of the printer from the power supply. If you use a battery, turn off the printer, then detach the battery. Plug the printer back in or attach the battery, then turn the printer back on. If the problem is not resolved, contact the service center.
6800 Cause Printer error has occurred. Action Turn off the printer, and unplug the power cord of the printer from the power supply. If you use a battery, turn off the printer, then detach the battery. Plug the printer back in or attach the battery, then turn the printer back on. If the problem is not resolved, contact the service center.
6801 Cause Printer error has occurred. Action Turn off the printer, and unplug the power cord of the printer from the power supply. If you use a battery, turn off the printer, then detach the battery. Plug the printer back in or attach the battery, then turn the printer back on. If the problem is not resolved, contact the service center.
6900 Cause Printer error has occurred. Action Turn off the printer, and unplug the power cord of the printer from the power supply. If you use a battery, turn off the printer, then detach the battery. Plug the printer back in or attach the battery, then turn the printer back on. If the problem is not resolved, contact the service center.
6901 Cause Printer error has occurred. Action Turn off the printer, and unplug the power cord of the printer from the power supply. If you use a battery, turn off the printer, then detach the battery. Plug the printer back in or attach the battery, then turn the printer back on. If the problem is not resolved, contact the service center.
6902 Cause Printer error has occurred. Action Turn off the printer, and unplug the power cord of the printer from the power supply. If you use a battery, turn off the printer, then detach the battery. Plug the printer back in or attach the battery, then turn the printer back on. If the problem is not resolved, contact the service center.
6910 Cause Printer error has occurred. Action Turn off the printer, and unplug the power cord of the printer from the power supply. If you use a battery, turn off the printer, then detach the battery. Plug the printer back in or attach the battery, then turn the printer back on. If the problem is not resolved, contact the service center.
6911 Cause Printer error has occurred. Action Turn off the printer, and unplug the power cord of the printer from the power supply. If you use a battery, turn off the printer, then detach the battery. Plug the printer back in or attach the battery, then turn the printer back on. If the problem is not resolved, contact the service center.
6930 Cause Printer error has occurred. Action Turn off the printer, and unplug the power cord of the printer from the power supply. If you use a battery, turn off the printer, then detach the battery. Plug the printer back in or attach the battery, then turn the printer back on. If the problem is not resolved, contact the service center.
6931 Cause Printer error has occurred. Action Turn off the printer, and unplug the power cord of the printer from the power supply. If you use a battery, turn off the printer, then detach the battery. Plug the printer back in or attach the battery, then turn the printer back on. If the problem is not resolved, contact the service center.
6932 Cause Printer error has occurred. Action Turn off the printer, and unplug the power cord of the printer from the power supply. If you use a battery, turn off the printer, then detach the battery. Plug the printer back in or attach the battery, then turn the printer back on. If the problem is not resolved, contact the service center.
6933 Cause Printer error has occurred. Action Turn off the printer, and unplug the power cord of the printer from the power supply. If you use a battery, turn off the printer, then detach the battery. Plug the printer back in or attach the battery, then turn the printer back on. If the problem is not resolved, contact the service center.
6940 Cause Printer error has occurred. Action Turn off the printer, and unplug the power cord of the printer from the power supply. If you use a battery, turn off the printer, then detach the battery. Plug the printer back in or attach the battery, then turn the printer back on. If the problem is not resolved, contact the service center.
6941 Cause Printer error has occurred. Action Turn off the printer, and unplug the power cord of the printer from the power supply. If you use a battery, turn off the printer, then detach the battery. Plug the printer back in or attach the battery, then turn the printer back on. If the problem is not resolved, contact the service center.
6942 Cause Printer error has occurred. Action Turn off the printer, and unplug the power cord of the printer from the power supply. If you use a battery, turn off the printer, then detach the battery. Plug the printer back in or attach the battery, then turn the printer back on. If the problem is not resolved, contact the service center.
6943 Cause Printer error has occurred. Action Turn off the printer, and unplug the power cord of the printer from the power supply. If you use a battery, turn off the printer, then detach the battery. Plug the printer back in or attach the battery, then turn the printer back on. If the problem is not resolved, contact the service center.
6944 Cause Printer error has occurred. Action Turn off the printer, and unplug the power cord of the printer from the power supply. If you use a battery, turn off the printer, then detach the battery. Plug the printer back in or attach the battery, then turn the printer back on. If the problem is not resolved, contact the service center.
6945 Cause Printer error has occurred. Action Turn off the printer, and unplug the power cord of the printer from the power supply. If you use a battery, turn off the printer, then detach the battery. Plug the printer back in or attach the battery, then turn the printer back on. If the problem is not resolved, contact the service center.
6946 Cause Printer error has occurred. Action Turn off the printer, and unplug the power cord of the printer from the power supply. If you use a battery, turn off the printer, then detach the battery. Plug the printer back in or attach the battery, then turn the printer back on. If the problem is not resolved, contact the service center.
6A00 Cause Printer error has occurred. Action Turn off the printer, and unplug the power cord of the printer from the power supply. If you use a battery, turn off the printer, then detach the battery. Plug the printer back in or attach the battery, then turn the printer back on. If the problem is not resolved, contact the service center.
A000 Cause Printer error has occurred. Action Turn off the printer, and unplug the power cord of the printer from the power supply. If you use a battery, turn off the printer, then detach the battery. Plug the printer back in or attach the battery, then turn the printer back on. If the problem is not resolved, contact the service center.
A100 Cause A problem has occurred with the battery. Action Cancel printing, then turn off the printer. Either replace the battery pack or detach the battery attachment and connect the supplied AC adapter to the printer. Plug the printer back in and turn the printer back on. If the problem is not resolved, contact the service center.
B201 Cause An error requiring you to contact the service center has occurred. Action Turn off the printer, and unplug the power cord of the printer from the power supply. If you use a battery, turn off the printer, then detach the battery. Contact the service center.
B202 Cause An error requiring you to contact the service center has occurred. Action Turn off the printer, and unplug the power cord of the printer from the power supply. If you use a battery, turn off the printer, then detach the battery. Contact the service center.
B203 Cause An error requiring you to contact the service center has occurred. Action Turn off the printer, and unplug the power cord of the printer from the power supply. If you use a battery, turn off the printer, then detach the battery. Contact the service center.
B204 Cause An error requiring you to contact the service center has occurred. Action Turn off the printer, and unplug the power cord of the printer from the power supply. If you use a battery, turn off the printer, then detach the battery. Contact the service center.