ENGLISH Quick Start Guide Table of Contents Introduction 1 Preparing the Printer 2 Installing the FINE Cartridges 3 Installing the Printer Driver Installing the Printer Driver - Windows® Installing the Printer Driver - Macintosh® Basic Operations 6 6 9 12 Printing with Windows 12 Printing with Macintosh 13 Replacing a FINE Cartridge 14
ENGLISH Exif Print This printer supports Exif Print. Exif Print is a standard for enhancing the communication between digital cameras and printers. Canadian Radio Interference Regulations This digital apparatus does not exceed the Class B limits for radio noise emissions from a digital apparatus as set out in the interference-causing equipment standard entitled “Digital Apparatus,” ICES-003 of the Industry Canada.
ENGLISH Introduction This Quick Start Guide uses the following symbols to indicate important information. Always observe the instructions indicated by these symbols. Instructions that, if ignored, could result in death or serious personal injury caused by incorrect operation of the equipment. These must be observed for safe operation. Instructions that, if ignored, could result in personal injury or material damage caused by incorrect operation of the equipment. These must be observed for safe operation.
ENGLISH Preparing the Printer 1 Place the printer on a flat surface. 2 Remove the tapes from the printer as shown. The tape position is subject to change. 3 Open the Paper Support and the Front Cover. 4 Remove the Protective Material on the right side. 5 Close the Front Cover.
ENGLISH Installing the FINE Cartridges • Never attempt to plug the power cord into the power outlet or unplug the power cord when your hands are wet. • Never damage, modify, stretch, or excessively bend or twist the power cord. Do not place heavy objects on the power cord. • Never use any power supply other than the standard power supply available in the country of purchase. Using the incorrect voltage and frequency could cause a fire or electric shock.
ENGLISH To the FINE Cartridge Holder Protective Tape 5 Remove the Protective Tape gently. Electrical Contacts • Do not touch the electrical contacts or Print Head Nozzles on a FINE Cartridge. • Handle the removed Protective Tape carefully to avoid getting your hands dirty or staining surrounding work area. Print Head Nozzles • Do not attempt to reattach the Protective Tape once you have removed it. 6 Insert the Color FINE Cartridge slightly slanted into the right slot (C).
ENGLISH 8 Use the same procedure to install the Black FINE Cartridge. The Black FINE Cartridge should be installed into the left slot (B). 9 Close the Front Cover. Wait until the preparatory operation is complete; it takes about one to two minutes.
ENGLISH Installing the Printer Driver Installing the Printer Driver – Windows® • Before installing the driver, disable all anti-virus programs and automatically loading programs. • The screens shown in this guide are for a computer running on Windows XP with Service Pack 2 installed (hereafter called Windows XP SP2). Screens may differ depending on the operating system you are using.
screen. When the screen shown on the left is displayed, click Easy Install. • When you select Easy Install, the items included in the CD-ROM are installed automatically. To select only particular items to be installed, click Custom Install and follow the instructions on the screen. • To install PhotoRecord, click Custom Install and follow the instructions on the screen. 5 When the list of applications to install appears, verify the contents, click Install, and then follow the instructions on the screen.
ENGLISH 8 Turn the printer on. If the printer is recognized, the printer driver will be automatically installed. ON 9 Click Next. When the Print Head Alignment Recommended screen appears, click Next. 10 When the screen shown on the left appears, click Exit. If the screen shows a check box for restarting your system, you can restart the system instead of just exiting the program. To restart the system, ensure that the check box is selected, and then click Restart.
ENGLISH Installing the Printer Driver – Macintosh® • Do not remove or insert the USB cable during installation, as this may result in the computer or printer not operating normally. • Before installing the driver, disable all anti-virus programs and automatically loading programs. 1 Ensure that the printer is connected to the computer. 2 Turn on the Mac. 3 Place the Setup Software & User’s Guide CD-ROM in the CD-ROM drive.
ENGLISH 6 Follow the instructions displayed on the screen. When the screen shown on the left is displayed, click Easy Install. When you select Easy Install, all the items included in the CD-ROM are installed automatically. To select only particular items to be installed, click Custom Install and follow the instructions on the screen. 7 When the list of applications to install appears, verify the contents, click Install and then follow the instructions on the screen.
ENGLISH 9 When the screen shown on the left appears, click Restart. After restarting the computer, check that the printer name you want to use is shown in Printer List. If the printer name is not displayed, press Add to add the printer. For details, refer to the Printer Setup Utility Help in the Mac Help. If straight lines are misaligned or the print result is unsatisfactory, align the Print Head. Refer to “Aligning the Print Head” in the User’s Guide.
ENGLISH Basic Operations Adjusting the print settings according to your needs allows you to produce better quality prints. • If you detect smoke, unusual smells or strange noises around the printer, immediately turn the printer off and always unplug the printer. Contact your local Canon service representative. • To avoid injury, never put your hand or fingers inside the printer while it is printing. Printing with Windows 1 From your application’s File menu, select Print.
ENGLISH Printing with Macintosh 1 From your application’s File menu, select Page Setup. 2 Select your printer model in Format for. 3 Select the paper size to be used. 4 Specify the page setup, then click OK. 5 From your application’s File menu, select Print. 6 Ensure that your printer model is selected, then select Quality & Media from the pop-up menu. 7 Specify the print settings according to your requirements. • For details about the printer driver, refer to the Printer Driver Guide.
ENGLISH Replacing a FINE Cartridge When the printer runs out of ink, replace the empty FINE Cartridge with a new one. Specify the following FINE Cartridges when purchasing. Black: PG-40 Color: CL-41 For iP2200, the FINE Cartridges PG-50 Black (High Yield) and CL-51 Color (High Yield) can be installed as an option. • When you use the iP2200 or iP1600 Be sure to use the iP2200 or iP1600 with both Black and Color FINE Cartridges (PG-40, CL-41). Otherwise, the printer cannot print.
