Photo Printer Canon U.S.A., Inc. Series One Canon Plaza, Lake Success, NY 11042, U.S.A. Quick Start Guide Canon Inc. 30-2, Shimomaruko 3-chome, Ohta-ku, Tokyo 146-8501, Japan Canon Canada, Inc. 6390 Dixie Road, Mississauga, Ontario, L5T 1P7, Canada Canon Latin America, Inc. 703 Waterford Way, Suite 400, Miami, FL 33126, U.S.A. Canon Mexicana Boulevard Manuel Avila Camacho No. 138 PB y Pisos 15, 16 y 17, Colonia Lomas de Chapultepec Delegación Miguel Hidalgo, CP 11000, Mexico D.F.
Getting Help from Canon Ordering Information For additional supplies, use the following descriptions and order numbers. Help Us Help You Better Before you contact Canon, please record the following information.
Photo Printer Quick Start Guide
Canon PIXMA iP1700 Photo Printer Quick Start Guide Copyright This manual is copyrighted by Canon U.S.A., Inc. with all rights reserved. Under the copyright laws, this manual may not be reproduced in any form, in whole or in part, without the prior written consent of Canon U.S.A., Inc. © 2006 Canon U.S.A., Inc. Disclaimer Canon U.S.A., Inc. has reviewed this manual thoroughly in order that it will be an easy-to-use guide to your Canon PIXMA iP1700 Photo Printer.
Contents Contents Basic Printing Turning on the Printer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Turning off the Printer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Loading Paper . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Basic Printing Basic Printing Note This Quick Start Guide describes some of the features of your printer and how to use them. For more information, refer to the On-screen Manual installed on your computer. While in the printer's Properties dialog box, place your cursor on the feature you want to know more about and press the F1 key, or click in the upper right corner and click the feature you want to know more about. Also, click the Instructions button to display the Printer Driver Guide.
Basic Printing 2 Turn on your computer. Turning off the Printer 1 To turn off the printer, press the POWER button. When the POWER lamp stops flashing, the printer is turned off. Important About the Power Plug When removing the power plug after you have turned off the printer, be sure to check that the POWER lamp is not lit. If the power plug is removed from the wall outlet when the POWER lamp remains lit or is flashing, the Print Head will not be protected and it may be unable to print.
Basic Printing Loading Paper Print Media to Avoid Do not use the following types of paper. Using such papers as these will not only produce unsatisfactory results, but they may also cause the printer to jam or malfunction.
Basic Printing Preparing the Printer • For detailed information on the specialty media Canon provides for use with its various printers, refer to the section "Using Specialty Media" on page 9. • Consult "Printing Media" in the User's Guide for detailed instructions on how to load specialty media into the printer. 1 Flatten the four corners of the paper before loading it. Note 2 • When paper is curled, gently bend it in the opposite direction until the paper becomes completely flat.
Basic Printing Note 3 • Place the printer on a flat surface. • Do not place any obstacles in front of the printer to keep this area open for paper which is ejected. • Remove each sheet as soon as paper is ejected. If the Paper Output Slot is stacked with printed sheets it may interfere with the printer's ejecting process. • When performing duplex printing, pay great attention to the dust and stain on the area (desk, etc.) where the printed paper is ejected.
Basic Printing Loading Envelopes Use either European DL or US Comm. Env. #10 size envelopes. The address is automatically rotated and printed out. Important • Do not use envelopes with embossed or treated surface, with a double flap or pressure seals, with sticker flaps. • Select either DL Env. (Windows) / DL Envelope (Macintosh) or Comm. Env. #10 (Windows) / #10 Envelope (Macintosh) in the printer driver according to the envelope size you are using.
Basic Printing Loading 4" x 6" size papers You can print on 4" x 6" size papers. (1) Align the paper against the right side of the Auto Sheet Feeder. Regardless to the actual orientation of your photograph, load the paper vertically (short side first) in the printer. A maximum of 20 sheets of size in 4" x 6" paper can be loaded at one time. (2) Slide the Paper Guide against the left side of the papers. (3) Select 4 x 6 in 101.6 x 152.4 mm in Page Size.
Basic Printing Using Specialty Media Canon recommends that you use genuine Canon media to ensure optimal print quality.
Basic Printing Canon Specialty Media Media Name Paper Support Load Limit Paper Printer Driver Settings Thickness Lever for Media Type Position Super White Paper Letter: up to 10mm or 0.
Basic Printing l Printing with Windows Note 1 2 3 • The menu screens and dialog boxes that appear may vary depending on the application you are using. • The steps described in this section are for printing using a computer with Windows® XP Service Pack 2 installed (hereafter called Windows XP SP2). Turn your printer on, then set papers. Create a document or open a file to print. Open the Printer Properties dialog box. (1) Select Print from the application's File menu. The Print dialog box opens.
Basic Printing 4 Specify the required settings. (1) Click Media Type to select the media loaded in the printer. (2) Click OK. Note 5 • From the Page Setup tab select the correct document size to be printed. • To adjust Print Quality settings, select Custom and click Set on the Main tab. You can control the quality in the Custom dialog box. • For details about other printer driver functions, click the Help button or Instructions button and refer to Help or Printer Driver Guide.
Basic Printing Note You can cancel a print job in progress by simply pressing the RESUME/ CANCEL button on the printer. See "Cancel Printing" on page 15. Printing with Macintosh Note 1 2 3 • The menu screens and dialog boxes that appear may vary depending on the software application you are using. • The steps described in this section are for printing using a computer with Mac® OS X v.10.4.x installed (hereafter called Macintosh®).
Basic Printing 4 Specify the required settings. (1) Select Print from the application's File menu. The Print dialog box opens. (2) Ensure that iP1700 is selected. (3) Select Quality & Media from the pop-up menu. (4) Select the Media Type from the pop-up menu. (5) Select the print mode appropriate to your document listed under Print Mode. (6) Click Print.
Basic Printing Cancel Printing You can cancel a print job while printing by pushing the RESUME/CANCEL button on the printer. 1 Press the RESUME/CANCEL button while the printer is printing. Printing is canceled and the paper is ejected. Note 1 Click Cancel Printing on the Canon IJ Status Monitor to stop printing. To display the Canon IJ Status Monitor, click Canon iP1700 on the taskbar. The Canon IJ Status Monitor opens automatically whenever a printer error occurs.
Advanced Printing Advanced Printing Accessing the Printer Driver The Printer Properties dialog box can be opened from either within an application or directly from the Windows Start menu. Note This manual refers to operations in Windows XP SP2. These operations may vary depending on the operating system you use. Opening the Printer Properties Dialog Box from your Application Program The operations may vary slightly depending on your application program.
Advanced Printing When opening the Printer Properties dialog box from Properties, the tabs related to the Windows function (e.g., the Ports tab, or the Details tab) appear. These tabs do not appear, when opening the Printer Properties dialog box from Printing Preferences or applications. For details about the tabs related to the Windows function, refer to the manual of Windows. Note For details on how to set each function, refer to the Printer Driver Guide or Help.
Advanced Printing Using the Bundled Software The Setup CD-ROM includes photo applications designed to edit the photographs taken by a digital camera and print them as photo-lab quality prints. Use the application(s) suitable for your print purposes. Note • To install applications, refer to Easy Setup Instructions. • For details about photo applications, refer to the Photo Application Guide.
Printing Maintenance Printing Maintenance When Printing Becomes Faint or Colors are Incorrect When printing becomes faint or colors are incorrect, the Print Head Nozzles are probably clogged. Follow the procedures below to clean these nozzles. Step 1 "Printing the Nozzle Check Pattern" on page 20 After Print Head Cleaning, print the nozzle check pattern. If the print quality is poor, perform Print Head Cleaning. If the pattern is printed normally, click Exit.
Printing Maintenance Printing the Nozzle Check Pattern Print the nozzle check pattern to determine whether the ink ejects properly from the Print Head Nozzles. Use this function when printed results are blurred or a color is incorrect. Printing the Nozzle Check Pattern 1 2 With the printer on, load a sheet of Letter size plain paper in the Auto Sheet Feeder. Open the Printer Properties dialog box. See "Opening the Printer Properties Dialog Box Directly from the Start Menu" on page 16.
Printing Maintenance (4) Confirm the nozzle check pattern. See "Examining the Nozzle Check Pattern" on page 23. 1 2 With the printer on, load a sheet of Letter size plain paper in the Auto Sheet Feeder. Open the Canon IJ Printer Utility dialog box. (1) Select Applications from the Go menu. (2) Double-click the Utilities folder, and then double-click the Printer Setup Utility icon. If you are using Mac OS X v.10.2.8, double-click the Utilities folder, and then double-click the Print Center icon.
Printing Maintenance 3 Print the Nozzle Check Pattern. (1) Select Test Print from the pop-up menu. (2) Click Nozzle Check. (3) Click Print Check Pattern. Note Click the Initial Check Items button and a confirmation message for printing the nozzle check pattern will appear. (4) Confirm the nozzle check pattern. See "Examining the Nozzle Check Pattern" on page 23.
Printing Maintenance Examining the Nozzle Check Pattern The nozzle check pattern should appear as follows when ink is discharged properly. Examine the nozzle check pattern printed by the printer. Note If the ink level is low, the nozzle check pattern cannot be printed properly. Stop printing the nozzle check pattern, and replace a FINE Cartridge. See "Replacing a FINE Cartridge" on page 39. 1 Confirm the printed nozzle check pattern.
Printing Maintenance 2 When cleaning is necessary, click the Cleaning button on the Pattern Check dialog box. * * *Click the Cleaning button and then go to Print Head Cleaning. See "Print Head Cleaning" on page 25. If there are neither missing lines nor white stripes in the nozzle check pattern, click Exit (Windows) or Quit (Macintosh) to finish the nozzle check.
Printing Maintenance Print Head Cleaning If missing lines or white stripes are found in the printed nozzle check pattern, proceed with a Print Head Cleaning to unclog the Print Head Nozzles. Cleaning the Print Head Nozzles will consume ink, so proceed with a Print Head Cleaning only when necessary. Note 1 2 If you pressed the Cleaning button on the Pattern Check screen displayed after a nozzle check pattern has been printed, start the Print Head Cleaning procedure from 3-(2).
Printing Maintenance 4 Check on the Print Head condition. (1) Click Print Check Pattern in the Nozzle Check dialog box which automatically appears after the cleaning is done. When the confirmation message is displayed, click OK. A nozzle check pattern will be printed. Do not perform any other operation until the printing of the nozzle check pattern is finished. Note Click the Initial Check Items button and a confirmation message for Print Head Cleaning will appear.
Printing Maintenance 3 Start Print Head Cleaning. (1) Select Cleaning from the pop-up menu. (2) Click Cleaning. (3) Click OK. Click the Initial Check Items button and a confirmation message for Print Head Cleaning will appear. Print Head Cleaning starts when the POWER lamp starts flashing. Note Important Do not perform any other operations until Print Head Cleaning finishes. This takes about 60 seconds.
Printing Maintenance 4 Check on the Print Head condition. (1) Click Print Check Pattern in the Nozzle Check dialog box which automatically appears after the cleaning is done. A nozzle check pattern will be printed. Do not perform any other operation until the printing of the nozzle check pattern is finished. (2) Look carefully at the printout of the nozzle check pattern to evaluate the condition of the Print Head. See "Examining the Nozzle Check Pattern" on page 23.
Printing Maintenance Print Head Deep Cleaning If print quality does not improve after a standard Print Head Cleaning, try Print Head Deep Cleaning, which is a more powerful cleaning process. Print Head Deep Cleaning consumes more ink than standard Print Head Cleaning, so perform this procedure only when necessary. 1 2 Ensure that the printer is turned on. Open the Printer Properties dialog box. See "Opening the Printer Properties Dialog Box Directly from the Start Menu" on page 16.
Printing Maintenance 3 Start Print Head Deep Cleaning. (1) Click the Maintenance tab. (2) Click Deep Cleaning. (3) Click Execute. Note Click the Initial Check Items button and a confirmation message for Print Head Deep Cleaning will appear. (4) When the confirmation message is displayed, click OK. Print Head Deep Cleaning starts when the POWER lamp starts flashing. Important Do not perform any other operations until Print Head Deep Cleaning finishes. This takes about one to two minutes.
Printing Maintenance 4 Check the Print Head condition. (1) Print a nozzle check pattern to evaluate a Print Head condition. See "Printing the Nozzle Check Pattern" on page 20. (2) If the problem persists, perform step 3 again. (3) If the problem persists, the printer may have run out of ink. See "Replacing a FINE Cartridge" on page 39. 1 2 Ensure that the printer is turned on. Open the Canon IJ Printer Utility dialog box. (1) Select Applications from the Go menu.
Printing Maintenance 3 Start Print Head Deep Cleaning. (1) Select Cleaning from the pop-up menu. (2) Click Deep Cleaning. (3) Click OK. Note Click the Initial Check Items button and a confirmation message for Print Head Deep Cleaning will appear. Print Head Deep Cleaning starts when the POWER lamp starts flashing. Important Do not perform any other operations until Print Head Deep Cleaning finishes. This takes about one to two minutes.
Printing Maintenance 4 Check the Print Head condition. (1) Print a nozzle check pattern to evaluate a Print Head condition. See "Printing the Nozzle Check Pattern" on page 20. (2) If the problem persists, perform step 3 again. (3) If the problem still persists, the printer may have run out of ink. See "Replacing a FINE Cartridge" on page 39.
Printing Maintenance Aligning the Print Head If ruled lines are misaligned or a printout is unsatisfactory, Print Head Alignment is required. ì 1 With the printer on, load a sheet of Letter size plain paper in the Auto Sheet Feeder. Move the Paper Thickness Lever to the left position. 2 Open the Printer Properties dialog box. See "Opening the Printer Properties Dialog Box Directly from the Start Menu" on page 16. 3 Print the pattern. (1) Click the Maintenance tab. (2) Click Print Head Alignment.
Printing Maintenance 4 Align the Print Head. (1) Look at the printout. From the patterns, select the most even and least irregular patterns. * (2) Enter the numbers. (3) Click OK. * If it is difficult to determine the best pattern on Column E, then pick a setting that has the least noticeable white stripes. Less noticeable vertical stripes More noticeable vertical stripes Less noticeable horizontal stripes More noticeable horizontal stripes (4) When the confirmation message is displayed, click OK.
Printing Maintenance 1 With the printer on, load a sheet of Letter size plain paper in the Auto Sheet Feeder. Move the Paper Thickness Lever to the left position. 2 Open the Canon IJ Printer Utility dialog box. (1) Select Applications from the Go menu. (2) Double-click the Utilities folder, and then double-click the Printer Setup Utility icon. If you are using Mac OS X v.10.2.8, double-click the Utilities folder, and then double-click the Print Center icon.
Printing Maintenance 3 Print the pattern. (1) Select Test Print from the pop-up menu. (2) Click Print Head Alignment. (3) Click OK. The Pattern will be printed.
Printing Maintenance 4 Align the Print Head. (1) Look at the print out. From the patterns, select the most even and least irregular patterns. * (2) Enter the numbers. (3) Click Send. * If it is difficult to determine the best pattern on Column E, then pick a setting that has the least noticeable white stripes.
Printing Maintenance Replacing a FINE Cartridge If there is no improvement with the quality of printing following such maintenance as Print Head Cleaning, a FINE Cartridge is probably empty. Replace an empty FINE Cartridge with a new one. When replacing a FINE Cartridge, check the model number very carefully. The printer will not print properly if a wrong FINE Cartridge is used, or installed improperly.
Printing Maintenance 2 Remove the empty FINE Cartridge. (1) Push down the FINE Cartridge. (2) Remove the FINE Cartridge. Important • Handle FINE Cartridges carefully to avoid staining your clothes or surrounding area. • Discard empty FINE Cartridges according to local laws and disposal regulations. 3 Prepare a replacement FINE Cartridge. To the FINE Cartridge Holder Protective Tape (1) Unpack a new FINE Cartridge and remove the Protective Tape gently.
Printing Maintenance Important • Do not reattach the Protective Tape once you have removed it. • Handle the removed Protective Tape carefully to avoid getting your hands dirty or staining surrounding work area. • Once the Protective Tape is removed, do not touch the electrical contacts or Print Head Nozzles on a FINE Cartridge. The printer may not print out properly if you touch it. Electrical Contacts Print Head Nozzles 4 Insert the new FINE Cartridge.
Printing Maintenance 5 Close the Front Cover. The FINE Cartridge Holder moves to the right. Note If the straight line is misaligned or the Print Head position is misaligned, align the Print Head position. See "Aligning the Print Head" on page 34. Important • To maintain optimal print quality, we recommend that you use Canon brand FINE Cartridge. Replenishing ink only is also not recommended. • Replace FINE Cartridge promptly. Do not leave FINE Cartridge removed.
Printing Maintenance What is Low Ink Warning? Low Ink Warning is that the ink counter counts a remaining level of ink and tells you that Fine Cartridges are running out of ink during printing. The ink counter considers as ink is full when a new FINE Cartridge is installed, and then starts counting a remaining level of ink. For this, if old FINE Cartridge is installed, remaining ink level may be displayed incorrectly. Note How to Check the Ink Level Open the Printer Properties dialog box.
Printing Maintenance When "!" mark appears on Low Ink Warning The ink level of the FINE Cartridge with "!" mark is low. You should purchase new FINE Cartridge. Note Setting of FINE Cartridges If a FINE Cartridge runs out of ink, you can print with either Color or Black FINE Cartridge only for a while. However the same printing quality cannot be expected comparing to printing with both cartridges. In this case, you should perform the following settings without removing the empty cartridge.
Printing Maintenance 1. Select Applications from the Go menu. 2. Double-click the Utilities folder, and then double-click the Printer Setup Utility icon. If you are using Mac OS X v.10.2.8, double-click the Utilities folder, and then double-click the Print Center icon. 3. Select iP1700 from Name in Printer List and then click Utility. If you are using Mac OS X v.10.2.8, select iP1700 from Name in Printer List and then click Configure. 4. Select iP1700 from the Product list and then click Maintenance. 5.
Printing Maintenance When "?" mark appears on Low Ink Warning If you install the FINE Cartridge that was once empty and start printing, "?" on the FINE Cartridge appears. Then the following message appears and printing stops. In this case, a remaining level of ink cannot be counted correctly. Pressing the RESUME/CANCEL button cancels the error indication and enables continuation of printing.
Troubleshooting Troubleshooting Troubleshooting usually falls into one of the following categories. In this chapter you will find the most common printing problems. Refer to the User's Guide for additional information on topics not covered in this section.
Troubleshooting Cannot Install the Printer Driver Problem Possible Cause Cannot Install the Installation Printer Driver procedure not followed correctly Try This Follow the Easy Setup Instructions for proper printer driver installation. If the printer driver was not installed correctly, delete the printer driver and restart your computer following the procedure described in the Printer Driver Guide. Try to reinstall the printer driver.
Troubleshooting The USB Connection Does Not Work Properly Problem The Printer is not Recognized Properly Possible Cause Try This You connect to the Connect the printer directly to the computer's USB port without going through the computer through a hub. USB hub Read the manual supplied with the USB expansion card and reinstall the card. A USB expansion card may not be installed correctly The computer does not recognize the printer properly.
Troubleshooting Print Quality is Poor or Contains Errors Problem Cannot Print to End of Job Possible Cause The Page Size setting does not match the size of the paper loaded in the printer The size of the print data is too large Ink Does Not Eject Properly/Not Printed/Printing is Blurred/ Colors are Wrong/White Streaks Appear/ Printed Ruled Lines are Misaligned FINE Cartridge is not installed properly/ there is no ink left Try This First, check the Page Size setting in the application.
Troubleshooting Problem Possible Cause Glossy photo paper other than Canon specialty media is used Try This Select Other Photo Paper from Media Type, which may resolve the problem. Load one sheet at a time and remove each sheet as soon as it is printed. Print Quality is not set Be sure to set the Print Quality setting to High for Windows or Fine for properly Macintosh. 1. Open the Printer Properties dialog box. See "Opening the Printer Properties Dialog Box from your Application Program" on page 16. 2.
Troubleshooting Problem Printed Surface is Scratched Possible Cause Try This Inappropriate type of paper is being used Check to see if the paper you are printing on is too thick or curled. See "Print Media to Avoid" on page 4. Note that smudging may occur at the top and bottom edges of paper when using Borderless Printing. Ensure that the paper you are using is compatible with Borderless Printing.
Troubleshooting Printer Does Not Start or Stops During Print Jobs Problem Printer Does Not Start or Printer Stops During Print Jobs Possible Cause Try This Printer cable is too long Avoid using USB cables longer than 16.4 feet. Undesired print jobs Restart your computer. It may solve the problem. are spooled/ Delete any undesired print jobs. Use Canon IJ Status Monitor in Windows or click Troubles in your the printer's icon in the Dock in Macintosh for the deletion. computer 1.
Troubleshooting Paper Does Not Feed Properly Problem Paper Does Not Feed Properly Possible Cause Inappropriate type of paper is being used Try This • Check to see if the paper you are printing on is too thick or curled. See "Print Media to Avoid" on page 4. • Check if the paper exceeds the load limit mark. If it exceeds, load less paper. See "Loading Plain Paper" on page 6. Paper Feed Roller is Follow the steps described below to clean the Paper Feed Rollers.
Troubleshooting Paper Jams Problem Paper Jams Possible Cause Try This Paper jams in Paper Remove the paper according to the following procedure. Output Slot/Auto 1. Slowly pull the paper out, either from the Auto Sheet Feeder or from the Paper Sheet Feeder Output Slot, whichever is easier. • If the paper tears and a piece remains inside the printer, open the Front Cover and remove it. Caution Be careful not to touch any components inside the printer. After removing all paper, close the Front Cover.
Troubleshooting The ALARM Lamp Flashes When a printer error occurs, the ALARM lamp flashes after the POWER lamp was turned off and then on. The number of flashes indicates the type of error that has occurred. Count the flashes and then take appropriate action to correct the error.
Troubleshooting Number of Flashes Sixteen Flashes Note Possible Cause Try This The ink level cannot Possible causes are as follows: be correctly · This FINE Cartridge has previously been used. detected · Ink may have run out. The function for detecting the remaining ink level will be disabled since the remaining ink level cannot be correctly detected. If you want to continue printing without this function, press the RESUME/CANCEL button.
Troubleshooting An Error Message Appears on the Screen Problem Possible Cause Printer not ready Try This Ensure that the printer is turned on. If the POWER lamp is turned off, turn the printer on. When the POWER lamp is flashing, the printer is initializing. Wait until the POWER lamp stops flashing. Error Writing/Output to USBnnn or MPUSBPRNnn Paper is not loaded Load paper and press the RESUME/CANCEL button. An error message may appear if the "No paper" error has not been reset for a certain period.
Troubleshooting Problem "Error No.:1700" Possible Cause The ink absorber is almost full Try This Ink used for cleaning is absorbed in a ink absorber inside the machine. Press the RESUME/CANCEL button to dismiss the error message and continue printing. You can continue printing for a while, but once the ink absorber becomes completely full, you will not be able to print until the ink absorber is replaced. Contact a Canon service representative as soon as possible to have this part replaced.
Appendix Appendix Specifications Printer Maximum resolution (dpi): 4800 (horizontal)* x 1200 (vertical) (*Ink droplets can be placed in a pitch of 1/4800 inch at minimum.) Print speed * Black printing *Print speed will vary depending on system configuration, software, document complexity, print mode and page coverage. Max Speed (Custom Setting 5): 22 ppm Standard: 13.3 ppm Color printing Max Speed (Custom Setting 5): 17 ppm Standard: 7.8 ppm Print width: 203.2 mm max. (8.
Appendix Minimum System Requirements*1 *2 Operating System Processor RAM Hard Disk Space Windows XP SP1,SP2 PentiumII 300 MHz*3 128 MB 400 MB Operating System Processor RAM Hard Disk Space Mac OS X v.10.4.x Intel processor, PowerPC G3/G4/G5 256 MB 250 MB Windows 2000 Professional SP2, SP3, SP4 Windows Millennium Edition Windows 98, 98 Second Edition Mac OS X v.10.2.8 - v.10.3.x 128 MB *1 For updated compatibility, visit our website.
Appendix Safety Precautions Please read the safety warnings and cautions provided in this manual to ensure that you use your printer safely. Do not attempt to use printer in any way not described in this manual. Warning You may cause an electric shock/fire or damage the printer if you ignore any of these safety precautions. Choosing a location Do not place the printer close to flammable solvents such as alcohol or thinners.
Appendix Caution You may cause injury or damage the printer if you ignore any of these safety precautions. Choosing a location Do not install the printer in a location that is unstable or subject to excessive vibration. Do not install the printer in locations that are very humid or dusty, in direct sunlight, outdoors, or close to a heating source.
Appendix Regulatory Information For 120V, 60Hz model Color Printer Model: K10279 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
Appendix CANON U.S.A., INC. LIMITED WARRANTY --- (USA Only) The limited warranty set forth below is given by Canon U.S.A., Inc. ("Canon USA") with respect to the new or refurbished Canon-brand product ("Product") packaged with this limited warranty, when purchased and used in the United States only.
Appendix Canon USA offers a range of customer technical support* options: • Interactive troubleshooting, e-mail technical support, the latest driver downloads and answers to frequently asked questions (www.canontechsupport.
Index Index A M Advanced Printing .......................................................16 ALARM Lamp ................................................................ 2 ALARM Lamp Flashes ...................................................56 Aligning the Print Head ...............................................34 An Error Message Appears on the Screen .....................58 Matte Photo Paper ...................................................... 10 Media Name .........................................
Index Printer Setup Utility .................................................... 21 Printing the Nozzle Check Pattern ............................... 20 R Replacing a FINE Cartridge .......................................... 39 RESUME/CANCEL button ............................................. 13 S Safety Precautions ..................................................... 62 Specialty Media ......................................................... 10 Specifications ..........................................
69
70
Getting Help from Canon Ordering Information For additional supplies, use the following descriptions and order numbers. Help Us Help You Better Before you contact Canon, please record the following information.
Photo Printer Canon U.S.A., Inc. Series One Canon Plaza, Lake Success, NY 11042, U.S.A. Quick Start Guide Canon Inc. 30-2, Shimomaruko 3-chome, Ohta-ku, Tokyo 146-8501, Japan Canon Canada, Inc. 6390 Dixie Road, Mississauga, Ontario, L5T 1P7, Canada Canon Latin America, Inc. 703 Waterford Way, Suite 400, Miami, FL 33126, U.S.A. Canon Mexicana Boulevard Manuel Avila Camacho No. 138 PB y Pisos 15, 16 y 17, Colonia Lomas de Chapultepec Delegación Miguel Hidalgo, CP 11000, Mexico D.F.