iP4600 series On-screen Manual Стр. 1 из 396 стр. How to Use This Manual Printing This Manual MC-2984-V1.00 Basic Guide Advanced Guide Describes the summary of this product. Describes the detailed function of this product.
iP4600 series Basic Guide Стр. 2 из 396 стр. How to Use This Manual Printing This Manual Printing DVD CD Label MP-2357-V1.
Overview of the Printer Стр. 3 из 396 стр. Advanced Guide Troubleshooting Contents > Overview of the Printer Overview of the Printer This section shows the component names of the printer and describes their functions.
Main Components Стр. 4 из 396 стр. Advanced Guide Troubleshooting Contents > Overview of the Printer > Main Components Main Components Front View (1) Top Cover Open it when replacing the ink tanks or removing jammed paper inside the printer. (2) Paper Guides Slide to align with both sides of the paper stack. (3) Rear Tray Load various sizes or types of paper which you can use on the printer.
Main Components Extend to open support the printouts. (9) Inner Cover Close it when printing on paper. (10) Power button Turns the power on or off. Note Auto power on/off feature You can set the printer to turn on or off automatically. - Auto Power On: Automatically turns on the printer when print data is sent from the computer. - Auto Power Off: Automatically turns off the printer when no print data is sent for a certain interval.
Main Components Rear View (14) USB Port Plug in the USB cable to connect the printer with a computer. Caution Do not touch the metal casing. Important Do not plug in or unplug the USB cable while the printer is printing from the computer. (15) Rear Cover Detach to remove jammed papers. (16) Power Cord Connector Plug in the supplied power cord. Inside View (17) Ink lamp Lights or flashes red to indicate the ink tank status. See Checking the Ink Status .
Main Components Стр. 7 из 396 стр.
Printing Стр. 8 из 396 стр. Advanced Guide Troubleshooting Contents > Printing Printing This section describes how to print documents or photos. You can easily print photos taken with your digital camera by using Easy-PhotoPrint EX supplied with your printer. Printing Photos (Easy-PhotoPrint EX) Using Various Functions of Easy-PhotoPrint EX Printing Documents (Windows) Printing Documents (Macintosh) For Mac OS X v.10.5.x For Mac OS X v.10.4.x or Mac OS X v.10.3.
Printing Photos (Easy-PhotoPrint EX) Стр. 9 из 396 стр. Advanced Guide Troubleshooting Contents > Printing > Printing Photos (Easy-PhotoPrint EX) Printing Photos (Easy-PhotoPrint EX) Print image data saved on your computer by using Easy-PhotoPrint EX supplied with your printer. This section describes the procedure, using print setting for borderless photo print on 4" x 6" / 10 x 15 cm photo paper as a sample. For details on Easy-PhotoPrint EX, refer to the on-screen manual: Advanced Guide .
Printing Photos (Easy-PhotoPrint EX) Стр. 10 из 396 стр. (1) Start Easy-PhotoPrint EX. Double-click (Easy-PhotoPrint EX) on the desktop. Click Here: Easy-PhotoPrint EX Select the Go menu, Applications, Canon Utilities, Easy-PhotoPrint EX, then double-click EasyPhotoPrint EX. Note To start Easy-PhotoPrint EX from Solution Menu, double-click (Solution Menu) on the desktop and click (Print photos or albums, etc.). See To Start Solution Menu.
Printing Photos (Easy-PhotoPrint EX) To print two or more copies, click (Up arrow) to change the number of copies. To cancel the selection, click the image to cancel in the selected image area and click (Delete Imported Image). You can also use (Down arrow) to change the number of copies to zero. You can also correct or enhance the selected image. See Using Various Functions of Easy-PhotoPrint EX . (3) Click Select Paper. 4. Select the loaded paper.
Printing Photos (Easy-PhotoPrint EX) Стр. 12 из 396 стр. Note You can change the direction of photo or crop a part of photo (trimming) to print. For details on the operation, refer to the on-screen manual: Advanced Guide. (2) Click Print. Note To cancel a print job in progress, press the RESUME/CANCEL button on the printer or click Cancel Printing on the printer status monitor. After canceling the print job, blank sheets of paper may be ejected.
Using Various Functions of Easy-PhotoPrint EX Стр. 13 из 396 стр. Advanced Guide Troubleshooting Contents > Printing > Printing Photos (Easy-PhotoPrint EX) > Using Various Functions of Easy-PhotoPrint EX Using Various Functions of Easy-PhotoPrint EX This section describes a few of the useful functions of Easy-PhotoPrint EX. For details on the operation, refer to the on-screen manual: Advanced Guide . Creating Your Own Prints You can create an album or calendar using your photos.
Printing Documents (Windows) Стр. 14 из 396 стр. Advanced Guide Troubleshooting Contents > Printing > Printing Documents (Windows) Printing Documents (Windows) Note Operations may vary depending on your software application. For details on the operation, refer to the instruction manual of your application. The screens used in this section are for printing with Windows Vista operating system Ultimate Edition (hereafter referred to as "Windows Vista"). 1. Make sure that the printer is turned on.
Printing Documents (Windows) (1) Select the media type of the paper to print in Media Type. Note If you select A4, B5, A5, or Letter-sized plain paper when Automatically Select is selected in Paper Source, the printer feeds the paper from the Cassette. If you select other sizes or types of paper such as photo paper, the printer feeds the paper from the Rear Tray.
Printing Documents (Windows) Стр. 16 из 396 стр. Note To cancel a print job in progress, press the RESUME/CANCEL button on the printer or click Cancel Printing on the printer status monitor. After canceling the print job, blank sheets of paper may be ejected. To display the printer status monitor, click Canon XXX (where " XXX" is your printer's name) on the taskbar. If printed ruled lines are misaligned or print results are unsatisfactory, adjust the print head position. See Aligning the Print Head.
Printing Documents (Macintosh) Стр. 17 из 396 стр. Advanced Guide Troubleshooting Contents > Printing > Printing Documents (Macintosh) Printing Documents (Macintosh) Note Operations may vary depending on your software application. For details on the operation, refer to the instruction manual of your application. For Mac OS X v.10.5.x 1. Make sure that the printer is turned on. See Front View . 2. Load paper. See Loading Paper.
Printing Documents (Macintosh) (1) Make sure that your printer's name is selected in Printer. (2) Select the page size of the paper to print in Paper Size. (3) Select Quality & Media in the pop-up menu. (4) Select the media type of the paper to print in Media Type. Note If you select A4, B5, A5, or Letter-sized plain paper when Automatically Select is selected in Paper Source, the printer feeds the paper from the Cassette.
Printing Documents (Macintosh) 7. Start printing. Click Print to start printing. Note Click the printer icon in the Dock to display the list of print jobs in progress. To cancel a print job in progress, select the desired job in the Name list and click Delete. After canceling the print job, blank sheets of paper may be ejected. To temporarily stop a job in progress, click Hold. To temporarily stop all the jobs in the list, click Pause Printer.
Printing Documents (Macintosh) 6. Specify the required print settings. (1) Select Print on the File menu in your software application. The Print dialog box appears. (2) Make sure that your printer's name is selected in Printer. (3) Select Quality & Media in the pop-up menu. (4) Select the media type of the paper to print in Media Type. Note If you select A4, B5, A5, or Letter-sized plain paper when Automatically Select is selected in Paper Source, the printer feeds the paper from the Cassette.
Printing Documents (Macintosh) Стр. 21 из 396 стр.
Other Usages Стр. 22 из 396 стр. Advanced Guide Troubleshooting Contents > Other Usages Other Usages This section describes the function to print photos from your PictBridge compliant device such as a digital camera connecting with a USB cable and the useful functions to start suppiled software applications from the desktop.
Printing Photos from a PictBridge Compliant Device Стр. 23 из 396 стр. Advanced Guide Troubleshooting Contents > Other Usages > Printing Photos from a PictBridge Compliant Device Printing Photos from a PictBridge Compliant Device Connecting the PictBridge compliant device to the printer with a USB cable that is recommended by the device's manufacturer, you can print saved images directly.
Solution Menu and My Printer Стр. 24 из 396 стр. Advanced Guide Troubleshooting Contents > Other Usages > Solution Menu and My Printer Solution Menu and My Printer Using Solution Menu or My Printer (Windows only), you can easily get the information on the printer or change the print settings by only clicking buttons on a screen. With Solution Menu, you can start the software applications supplied with the printer or display the operating instructions.
Solution Menu and My Printer Стр. 25 из 396 стр. Note You can also start My Printer from Solution Menu. Install My Printer from the Setup CD-ROM when it has not been installed or has been uninstalled. To install My Printer, select My Printer in Custom Install. To start My Printer from the Start menu, select All Programs (Programs in Windows 2000), Canon Utilities, My Printer, then My Printer.
Loading Paper Стр. 26 из 396 стр. Advanced Guide Troubleshooting Contents > Loading Paper Loading Paper This section describes types of paper you can load and how to load printing paper in the Rear Tray or Cassette.
Loading Paper Стр. 27 из 396 стр. Advanced Guide Troubleshooting Contents > Loading Paper > Loading Paper Loading Paper Paper Source to Load Paper You can select to load paper from two paper source, Cassette or Rear Tray. You can load paper in either one of the paper sources, depending on the page size and media type of paper. If you select Automatically Select in Paper Source, paper is fed from the Cassette or Rear Tray depending on the selection of the page size or media type.
Loading Paper Стр. 28 из 396 стр.
Loading Paper Стр. 29 из 396 стр. Advanced Guide Troubleshooting Contents > Loading Paper > Loading Paper > Loading Paper Loading Paper Important If you cut plain paper into small size such as 4" x 6" / 10 x 15 cm, 4" x 8" / 101.6 x 203.2 mm, 5" x 7" / 13 x 18 cm, or 2.16" x 3.58" / 55.0 x 91.0 mm (Card size) to perform trial print, it can cause paper jams. Note You can load only A4, B5, A5, or Letter-sized plain paper in the Cassette. Load other sizes or types of paper in the Rear Tray.
Loading Paper (2) Put your finger on the center of the top of the Paper Output Tray and open it gently. (3) Extend to open the Output Tray Extension. 3. Load paper. (1) Slide the Paper Guides (A) to open them, and load the paper in the center of the Rear Tray WITH THE PRINT SIDE FACING YOU. Important Always load paper in the portrait orientation (B). Loading paper in the landscape orientation (C) can cause paper jams. (2) Slide the Paper Guides to align with the both sides of the paper stack.
Loading Paper Loading Paper in the Cassette You can load only A4, B5, A5, or Letter-sized plain paper in the Cassette. See Media Types You Can Use . 1. Flatten the four corners of paper before loading it. See Loading Paper in the Rear Tray . 2. Pull out the Cassette from the printer. 3. Remove the Cover on the Cassette. 4. Prepare for loading the paper in the Cassette. Pull the tab (A) towards you to unlock and extend the Cassette. 5. Load paper. Стр. 31 из 396 стр.
Loading Paper (1) Load the paper stack WITH THE PRINT SIDE FACING DOWN and THE LEADING EDGE TO THE FAR SIDE, and align it against the right side of the Cassette. (2) Slide the Paper Guide (B) to align with the mark of paper size. The Paper Guide (B) will stop when it aligns with the corresponding mark of paper size. Note There may be a little space between the Paper Guide (B) and the paper stack. (3) Slide the Paper Guide (C) on the left to align completely with the side of the paper stack.
Loading Paper 8. Стр. 33 из 396 стр. Open the Paper Output Tray. (1) Put your finger in the center of the top of the Paper Output Tray and open it gently. (2) Extend to open the Output Tray Extension. Note After Loading Paper Select the size and type of the loaded paper in Page Size (or Paper Size) and Media Type in the printer driver. See Printing Documents (Windows) or Printing Documents (Macintosh) .
Loading Envelopes Стр. 34 из 396 стр. Advanced Guide Troubleshooting Contents > Loading Paper > Loading Paper > Loading Envelopes Loading Envelopes You can print on European DL and US Comm. Env. #10-sized envelopes. The address is automatically rotated and printed according to the envelope's direction by specifying with the printer driver properly. Important You cannot use the following envelopes.
Loading Envelopes Стр. 35 из 396 стр. (B) Rear side (C) Address side (1) Slide the Paper Guides (A) to open them, and load the envelopes in the center of the Rear Tray WITH THE ADDRESS SIDE FACING YOU. The folded flap of the envelope will be faced down on the left side. Up to 10 envelopes can be loaded at once. (2) Slide the Paper Guides to align them with both sides of the envelopes. Do not slide the Paper Guides too hard. The envelopes may not be fed properly. 3.
Media Types You Can Use Стр. 36 из 396 стр. Advanced Guide Troubleshooting Contents > Loading Paper > Loading Paper > Media Types You Can Use Media Types You Can Use Choose paper suitable for printing, for the best print results. Canon provides you various types of paper to enhance the fun of printing, such as stickers as well as papers for photo or document. We recommend the use of Canon genuine paper for printing your important photos. Media Types Commercially available papers
Media Types You Can Use Стр. 37 из 396 стр. For creating your own prints: T-Shirt Transfers < Not loadable*3 *4 1 sheet TR-301> Photo Stickers 1 sheet T-Shirt Transfers Glossy Photo Paper *1 Paper with a Model Number is Canon genuine paper. Refer to the instruction manual supplied with the paper for detailed information on the printable side and notes on handling paper. For information on the page sizes available for each Canon genuine paper, visit our website.
Media Types You Can Use Стр. 38 из 396 стр. Do not use heavier or lighter paper (except for Canon genuine paper), as it could jam in the printer. Notes on Storing Paper Take out only the necessary number of paper from the package, just before printing. To avoid curling, when you do not print, put unused paper back into the package and keep it on a level surface. And also, store it avoiding heat, humidity, and direct sunlight.
Media Types You Cannot Use Стр. 39 из 396 стр. Advanced Guide Troubleshooting Contents > Loading Paper > Loading Paper > Media Types You Cannot Use Media Types You Cannot Use Do not use the following types of paper. Using such paper will not only produce unsatisfactory results, but can also cause the printer to jam or malfunction.
Routine Maintenance Стр. 40 из 396 стр. Advanced Guide Troubleshooting Contents > Routine Maintenance Routine Maintenance This section describes how to replace ink tanks when they run out of ink, to clean the printer when the print result is faint, or to take an action when paper does not feed properly.
Replacing an Ink Tank Стр. 41 из 396 стр. Advanced Guide Troubleshooting Contents > Routine Maintenance > Replacing an Ink Tank Replacing an Ink Tank When ink runs out while printing is in progress, the Alarm lamp flashes orange four times and the error message will appear on your computer screen. Make sure which ink tank has run out of ink and replace it with a new ink tank. Note If the error message appears, confirm the displayed message and take an appropriate action.
Checking the Ink Status Стр. 42 из 396 стр. Advanced Guide Troubleshooting Contents > Routine Maintenance > Replacing an Ink Tank > Checking the Ink Status Checking the Ink Status You can check the ink status on the ink lamps or your computer screen. With the Ink Lamps 1. Make sure that the power is turned on, and open the Paper Output Tray gently. 2. Open the Top Cover. Note The printer may make operating noise when the Print Head moves to the replacement position. 3. Check the ink lamps.
Checking the Ink Status Стр. 43 из 396 стр. You can confirm the status of each ink tank on the printer status monitor (Windows) and Canon IJ Printer Utility (Macintosh). (A) Check if any symbol appears on the screen. Ink with (Ink low) is running low. You can continue printing for a while, but we recommend you to have a new ink tank available. Note An error message may appear while printing. Confirm the message and take an appropriate action.
Replacing Procedure Стр. 44 из 396 стр. Advanced Guide Troubleshooting Contents > Routine Maintenance > Replacing an Ink Tank > Replacing Procedure Replacing Procedure When the ink tanks run out of ink, follow the procedure below to replace them. Important Handling Ink To maintain optimal print quality, we recommend the use of specified Canon brand ink tanks. Refilling ink is not recommended. If you remove an ink tank, replace it immediately. Do not leave the printer with ink tanks removed.
Replacing Procedure 3. Стр. 45 из 396 стр. Replace the ink tank with the lamp flashing fast. Push the tab (A) and lift the ink tank to remove. Do no touch the Print Head Lock Lever (B). Important Handle the ink tank carefully to avoid staining of clothing or the surrounding area. Discard empty ink tank according to the local laws and regulations regarding disposal of consumables. Note Do not remove two or more ink tanks at the same time.
Replacing Procedure Стр. 46 из 396 стр. Important Do not touch the electrical contacts (E) on the ink tank. It can cause the printer to malfunction or become unable to print. Important If you shake an ink tank, the ink may spill out and stain your hands and the surrounding area. Handle an ink tank carefully. Do not squeeze the side of ink tanks as this may cause the ink to leak out. Be careful not to stain your hands and the surrounding area with ink on the removed protective cap.
Replacing Procedure Стр. 47 из 396 стр. Important You cannot print if the ink tank is installed in the wrong position. Be sure to install the ink tank in the correct position according to the label on the Print Head Holder. You cannot print unless all the ink tanks are installed. Be sure to install all the ink tanks. 6. Close the Top Cover. If you replaced the ink tank during printing, the printer resumes printing automatically.
When Printing Becomes Faint or Colors Are Incorrect Стр. 48 из 396 стр. Advanced Guide Troubleshooting Contents > Routine Maintenance > When Printing Becomes Faint or Colors Are Incorrect When Printing Becomes Faint or Colors Are Incorrect If print results are blurred or colors are not printed correctly, the pint head nozzles are probably clogged. Follow the procedure below to print nozzle check pattern, check the print head nozzle condition, then clean the Print Head.
Printing the Nozzle Check Pattern Стр. 49 из 396 стр. Advanced Guide Troubleshooting Contents > Routine Maintenance > When Printing Becomes Faint or Colors Are Incorrect > Printing the Nozzle Check Pattern Printing the Nozzle Check Pattern Print the nozzle check pattern to determine whether the ink ejects properly from the print head nozzles. You need to prepare: a sheet of A4 or Letter-sized plain paper Note If the Inner Cover is open, close it.
Printing the Nozzle Check Pattern Стр. 50 из 396 стр. Note Clicking Initial Check Items displays the items to be checked before printing the pattern. 5. Examine the pattern. See Examining the Nozzle Check Pattern. 1. Make sure that the power is turned on and one or more sheets of A4 or Letter-sized plain paper are loaded in the Cassette. 2. Open the Paper Output Tray gently, and extend to open the Output Tray Extension. 3. Open the Canon IJ Printer Utility dialog box.
Examining the Nozzle Check Pattern Стр. 51 из 396 стр. Advanced Guide Troubleshooting Contents > Routine Maintenance > When Printing Becomes Faint or Colors Are Incorrect > Examining the Nozzle Check Pattern Examining the Nozzle Check Pattern Examine the nozzle check pattern, and clean the Print Head if necessary. 1. Check if there are no missing lines in the pattern (1) or no white streaks in the pattern (2). (1) Check if lines are missing in this pattern.
Examining the Nozzle Check Pattern Стр. 52 из 396 стр. Click Cleaning. Make sure that one or more sheets of A4 or Letter-sized plain paper are loaded in the Cassette, and then proceed to the procedure below. Go to the procedure of (3) in step 4 . Go to the procedure of (3) in step 4 .
Cleaning the Print Head Стр. 53 из 396 стр. Advanced Guide Troubleshooting Contents > Routine Maintenance > When Printing Becomes Faint or Colors Are Incorrect > Cleaning the Print Head Cleaning the Print Head Clean the Print Head if lines are missing or if white streaks are present in the printed nozzle check pattern. Cleaning unclogs the nozzles and restores the print head condition. Cleaning the Print Head consumes ink, so clean the Print Head only when necessary.
Cleaning the Print Head (1) Click the Maintenance tab. (2) Click Cleaning. (3) Select the ink group to clean. When cleaning the nozzles of black ink tanks: Select Black if there are missing lines in PGBK of the nozzle check pattern, or Color if there are white streaks in BK of the nozzle check pattern. For details on the nozzle check pattern, see Examining the Nozzle Check Pattern. (4) Click Execute. The printer starts cleaning the Print Head when the Power lamp starts flashing green.
Cleaning the Print Head 2. Open the Paper Output Tray gently, and extend to open the Output Tray Extension. 3. Open the Canon IJ Printer Utility dialog box. See Opening the Canon IJ Printer Utility (Macintosh) . 4. Clean the Print Head. (1) Make sure that Cleaning is selected in the pop-up menu. (2) Click Cleaning. (3) Select the ink group to clean.
Cleaning the Print Head Стр. 56 из 396 стр.
Cleaning the Print Head Deeply Стр. 57 из 396 стр. Advanced Guide Troubleshooting Contents > Routine Maintenance > When Printing Becomes Faint or Colors Are Incorrect > Cleaning the Print Head Deeply Cleaning the Print Head Deeply If print quality does not improve by standard cleaning of the Print Head, clean the Print Head deeply. Cleaning the Print Head deeply consumes more ink than standard cleaning of the Print Head, so clean the Print Head deeply only when necessary. 1.
Cleaning the Print Head Deeply Do not perform any other operations until the printer completes the deep cleaning of the Print Head. This takes about 3 minutes. 4. Print the nozzle check pattern to check the print head condition. See Printing the Nozzle Check Pattern . Note If the problem is not resolved, open the Top Cover to confirm that the ink is remaining, turn off the printer, then clean the Print Head deeply again after 24 hours. If this does not solve the problem, the Print Head may be damaged.
Cleaning the Print Head Deeply Стр. 59 из 396 стр. Note Clicking Initial Check Items displays the items to be checked before cleaning the Print Head deeply. 4. Print the nozzle check pattern to check the print head condition. See Printing the Nozzle Check Pattern . Note If the problem is not resolved, open the Top Cover to confirm that the ink is remaining, turn off the printer, then clean the Print Head deeply again after 24 hours. If this does not solve the problem, the Print Head may be damaged.
Aligning the Print Head Стр. 60 из 396 стр. Advanced Guide Troubleshooting Contents > Routine Maintenance > When Printing Becomes Faint or Colors Are Incorrect > Aligning the Print Head Aligning the Print Head If printed ruled lines are misaligned or print results are otherwise unsatisfactory, adjust the print head position. You need to prepare: a sheet of A4 or Letter-sized supplied paper or Canon Matte Photo Paper MP-101 Note If the Inner Cover is open, close it.
Aligning the Print Head (1) Click the Maintenance tab. (2) Click Print Head Alignment. (3) Confirm the displayed message, and click Align Print Head. The print head alignment pattern will be printed and the printer will adjust the print head position automatically. Do not open the Top Cover while printing is in progress. Printing takes about 7 minutes to complete. Note The pattern will be printed in black and blue. If the adjustment has failed, the Alarm lamp will flash.
Aligning the Print Head 3. Стр. 62 из 396 стр. Open the Canon IJ Printer Utility dialog box. See Opening the Canon IJ Printer Utility (Macintosh) . 4. Adjust the print head position. (1) Select Test Print in the pop-up menu. (2) Click Print Head Alignment. (3) Confirm the displayed message, and click Align Print Head. The print head alignment pattern will be printed and the printer will adjust the print head position automatically. Do not open the Top Cover while printing is in progress.
Cleaning the Paper Feed Roller Стр. 63 из 396 стр. Advanced Guide Troubleshooting Contents > Routine Maintenance > Cleaning the Paper Feed Roller Cleaning the Paper Feed Roller If the Paper Feed Roller is dirty or paper powder is attached to it, paper may not be fed from the Rear Tray or Cassette properly. In this case, clean the Paper Feed Roller. Cleaning will wear out the Paper Feed Roller, so perform this only when necessary.
Cleaning the Paper Feed Roller 5. Make sure that the Paper Feed Roller stops rotating. When the message appears, load paper in the paper source you selected in the procedure of (3) in step 4. Load three sheets of A4 or Letter-sized plain paper. 6. Confirm the displayed message, and click OK. The paper that is loaded in the printer will feed through the printer and be ejected. Do not perform any other operations until the printer completes the cleaning of the Paper Feed Roller. 7.
Cleaning the Paper Feed Roller Стр. 65 из 396 стр. (4) Click OK. (5) Confirm the displayed message, and click OK. The Paper Feed Roller will rotate as it is cleaned. 5. Make sure that the Paper Feed Roller stops rotating. When the message appears, load paper in the paper source you selected in the procedure of (3) in step 4. Load three sheets of A4 or Letter-sized plain paper. 6. Confirm the displayed message, and click OK.
Cleaning the Pad in the Cassette Стр. 66 из 396 стр. Advanced Guide Troubleshooting Contents > Routine Maintenance > Cleaning the Pad in the Cassette Cleaning the Pad in the Cassette If the Pad in the Cassette is smeared with paper powder or dirt, two or more sheets of paper may be ejected. Follow the procedure below to clean the Pad in the Cassette. You need to prepare: cotton swab 1. Pull out the Cassette from the printer, and remove all the papers. 2.
Opening the Maintenance Screens Стр. 67 из 396 стр. Advanced Guide Troubleshooting Contents > Routine Maintenance > Opening the Maintenance Screens Opening the Maintenance Screens You can maintain the printer from the printer properties dialog box (Windows) or Canon IJ Printer Utility (Macintosh). Opening the Printer Properties Dialog Box (Windows) 1. Click Control Panel, and Printer under Hardware and Sound. In Windows XP, click Control Panel, Printers and Other Hardware, then Printers and Faxes.
Opening the Maintenance Screens Стр. 68 из 396 стр. The Canon IJ Printer Utility starts up. Note You can also open Canon IJ Printer Utility by the procedure below. Select Applications from the Go menu, double-click the Utilities folder, then double-click Printer Setup Utility. For details, refer to the on-screen manual: Advanced Guide.
Appendix Стр. 69 из 396 стр.
Safety Precautions Стр. 70 из 396 стр. Advanced Guide Troubleshooting Contents > Appendix > Safety Precautions Safety Precautions Please read the safety warnings and cautions provided in this manual to ensure that you use the printer safely. Do not attempt to use the printer in any way not described in this manual. It causes unexpected accident, fire, or electrical shock. Warning This product emits low level magnetic flux.
Safety Precautions Стр. 71 из 396 стр. If you accidentally switch the printer on while cleaning it, you could injure yourself or damage the printer. Maintaining the printer Do not attempt to disassemble or modify the printer. There are no user serviceable parts inside the printer. The printer contains high-voltage components. Never attempt any maintenance procedure not described in this guide. Working around the printer Do not use highly flammable sprays near the printer.
Safety Precautions Стр. 72 из 396 стр. If irritation or discomfort occurs, obtain medical advice immediately. In case ink gets in contact with eyes, rinse with water immediately. In case ink gets in contact with skin, wash with soap and water immediately. If irritation to eyes or skin persists, obtain medical advice immediately. Do not shake Print Heads or ink tanks. Ink may spill out and stain clothing or the surrounding area. Never touch the electrical contacts on a Print Head after printing.
Legal Limitations on Use of Your Product and Use of Images Advanced Guide Стр. 73 из 396 стр. Troubleshooting Contents > Appendix > Legal Limitations on Use of Your Product and Use of Images Legal Limitations on Use of Your Product and Use of Images It may be unlawful to print the following documents. The list provided is non-exhaustive. When in doubt, check with a legal representative in your jurisdiction.
Tips on How to Use Your Printer Стр. 74 из 396 стр. Advanced Guide Troubleshooting Contents > Appendix > Tips on How to Use Your Printer Tips on How to Use Your Printer This section introduces the tips on how to use your printer and for printing with optimal quality. Ink is used for various purposes. How is ink used for various purposes other than printing? Ink may be used for purposes other than printing.
Tips on How to Use Your Printer Стр. 75 из 396 стр. Tip!: Check how to load the paper correctly! Is the paper loaded in the correct orientation? When loading paper in the Rear Tray or Cassette, make sure the orientation of paper. (A) (B) (A) Rear Tray (B) Cassette To load paper in the Rear Tray, load paper with the printing side facing To load paper in the Cassette, load paper with the printing side facing down. you. Is the paper curled? The curled paper causes paper jam.
Tips on How to Use Your Printer If you press the Power button to turn off the power, the printer caps the Print Head (nozzles) automatically to prevent from drying. If you unplug the power cord from the wall outlet or turn off the extender cable connector before the Power lamp is turned off, the Print Head will not be capped properly and this will cause drying or clogging. To unplug the power cord, be sure to follow this procedure.
Tips on How to Use Your Printer Стр. 77 из 396 стр. Tip!: Print the nozzle check pattern to check if the nozzles are clogged. If the print head nozzles are clogged, colors may become uneven or the print results may be blurred. In this case Print the nozzle check pattern Check the printed check pattern to see if the nozzles are clogged. See When Printing Becomes Faint or Colors Are Incorrect .
iP4600 series Advanced Guide Стр. 78 из 396 стр. MC-3015-V1.
iP4600 series Advanced Guide Стр. 79 из 396 стр.
iP4600 series Advanced Guide Стр. 80 из 396 стр.
iP4600 series Advanced Guide Стр. 81 из 396 стр.
How to Use This Manual Стр. 82 из 396 стр.
Operating the Contents Screen Стр. 83 из 396 стр. Advanced Guide > How to Use This Manual > Operating the Contents Screen Operating the Contents Screen When you click a title displayed in the Contents screen found to the left of the On-screen Manual, the pages of that title are displayed in the description window on the right side. When you click found to the left of , the titles found in the lower hierarchies are displayed. Note Click to close or display the Contents screen.
Operating the Explanation Screen Стр. 84 из 396 стр. Advanced Guide > How to Use This Manual > Operating the Explanation Screen Operating the Explanation Screen (1) Click the green characters to jump to the corresponding page. (2) The cursor jumps to the top of this page.
Printing This Manual Advanced Guide > How to Use This Manual > Printing This Manual Printing This Manual Click to display the Print window to the left of the On-screen Manual. Note Click , and then click Option Settings to display the Option Settings dialog box. You can then set up the printing operation. To display the Print dialog box, click and then click Print Settings. When the dialog box is displayed, select the printer to be used for printing.
Printing This Manual 3. Execute print Confirm the number of pages to be printed, and then click Yes. The topics that are currently displayed are printed. Selected Documents You can select and print the topics that you want printed. 1. From Select Target, select Selected Documents The titles of all topics are displayed in the Documents to Be Printed list. 2. Select the topics to be printed From the Documents to Be Printed list, select the title check boxes of the topics to be printed.
Printing This Manual Стр. 87 из 396 стр. 1. From Select Target, select All Documents The titles of all topics are displayed in the Documents to Be Printed list, and the check boxes are automatically selected. Note If you clear the check box of a topic, that topic is not printed. Click Select All to select the check boxes of all titles. Click Clear All to clear the check boxes of all titles.
Using Keywords to Find a Topic Advanced Guide > How to Use This Manual > Using Keywords to Find a Topic Using Keywords to Find a Topic You can enter a keyword to search for a target page. All installed On-screen Manuals (user's guides) are searched. 1. Click A search window is displayed to the left of the On-screen Manual. Note Click to close or display the Search window. 2. Enter a keyword In Keyword, enter a keyword for the item to be checked.
Using Keywords to Find a Topic Стр. 89 из 396 стр. 4. Display the topic that you want to read From the search results list, double-click (or select and press Enter) the title of the topic you want to read. When the pages of that title are displayed, the keywords found on those pages are highlighted.
Registering Topics to My Manual Стр. 90 из 396 стр. Advanced Guide > How to Use This Manual > Registering Topics to My Manual Registering Topics to My Manual Register frequently read pages as My Manual topics so that you can refer to those pages easily at any time. 1. Display the topic Display the topic to be added to My Manual. 2. Click The My Manual window is displayed to the left of the On-screen Manual. Note Click to close or display the My Manual window. 3.
Symbols Used in this Document Стр. 91 из 396 стр. Advanced Guide > How to Use This Manual > Symbols Used in this Document Symbols Used in this Document Warning Instructions that, if ignored, could result in death or serious personal injury caused by incorrect operation of the equipment. These must be observed for safe operation. Caution Instructions that, if ignored, could result in personal injury or material damage caused by incorrect operation of the equipment.
Trademarks Стр. 92 из 396 стр. Advanced Guide > How to Use This Manual > Trademarks Trademarks Microsoft is a registered trademark of Microsoft Corporation. Windows is a trademark or registered trademark of Microsoft Corporation in the U.S. and/or other countries. Windows Vista is a trademark or registered trademark of Microsoft Corporation in the U.S. and/or other countries. Macintosh and Mac are trademarks of Apple Inc., registered in the U.S. and other countries.
Printing from a Computer Стр. 93 из 396 стр.
Printing with the Bundled Application Software Стр. 94 из 396 стр.
What Is Easy-PhotoPrint EX? Стр. 95 из 396 стр. Advanced Guide > Printing from a Computer > Printing with the Bundled Application Software > What Is Easy-PhotoPrint EX? What Is Easy-PhotoPrint EX? Easy-PhotoPrint EX allows you to create albums, calendars and stickers easily using photos taken with digital cameras. You can also print borderless photos easily. Important Easy-PhotoPrint EX does not support Windows 95, Windows 98, Windows Me, or Windows NT4.
What Is Easy-PhotoPrint EX? Стр. 96 из 396 стр. The Photo Print function is available with the following applications: MP Navigator EX Ver.1.00 or later ZoomBrowser EX Ver.6.0 or later Digital Photo Professional Ver.3.2 or later Note Easy-PhotoPrint EX is subject to the following restrictions when started from Digital Photo Professional: - Menu does not appear in the step button area on the left side of the screen. - Images cannot be corrected/enhanced. - Image display order cannot be changed.
Printing Photos Стр. 97 из 396 стр. Advanced Guide > Printing from a Computer > Printing with the Bundled Application Software > Printing Photos Printing Photos Easy-PhotoPrint EX allows you to print your favorite photos in a variety of layouts. You can also create borderless photos easily. Corrections suitable for photos will be applied automatically when printing. Steps 1. Starting Easy-PhotoPrint EX 2. Selecting a Photo 3. Selecting the Paper 4.
Starting Easy-PhotoPrint EX Стр. 98 из 396 стр. Advanced Guide > Printing from a Computer > Printing with the Bundled Application Software > Printing Photos > Starting Easy-PhotoPrint EX Starting Easy-PhotoPrint EX 1. From the Start menu, select (All) Programs > Canon Utilities > Easy-PhotoPrint EX > Easy-PhotoPrint EX. Easy-PhotoPrint EX starts and Menu appears.
Selecting a Photo Стр. 99 из 396 стр. Advanced Guide > Printing from a Computer > Printing with the Bundled Application Software > Printing Photos > Selecting a Photo Selecting a Photo 1. Click Photo Print from Menu. The Select Images screen appears. Important The reduced images (thumbnails) displayed in the screen may appear as follows: - A black line appears along an edge of the image. - An edge of the image appears cropped.
Selecting a Photo Стр. 100 из 396 стр. Note You can correct or enhance the selected image before printing. Correcting and Enhancing Photos See Help for details on the Select Images screen.
Selecting the Paper Стр. 101 из 396 стр. Advanced Guide > Printing from a Computer > Printing with the Bundled Application Software > Printing Photos > Selecting the Paper Selecting the Paper 1. Click Select Paper. The Select Paper screen appears. 2. Set the following items according to the printer and paper to be used: Printer Paper Source Paper Size Media Type Note The paper sizes and media types may vary depending on the printer. See Help for details.
Printing Стр. 102 из 396 стр. Advanced Guide > Printing from a Computer > Printing with the Bundled Application Software > Printing Photos > Printing Printing 1. Click Layout/Print. The Layout/Print screen appears. Important The reduced images (thumbnails) displayed in the screen may appear as follows: - A black line appears along an edge of the image. - An edge of the image appears cropped.
Printing Стр. 103 из 396 стр. It is recommended that you save the printed image if you want to print it again. Saving Photos When you print on a bordered layout, the margins on the left and right or the top and bottom may become wider than the other. How Do I Print with Even Margins? You can crop images or print dates on photos. Cropping Photos (Photo Print) Printing Dates on Photos (Photo Print) You can correct or enhance the selected image before printing.
Creating an Album Стр. 104 из 396 стр. Advanced Guide > Printing from a Computer > Printing with the Bundled Application Software > Creating an Album Creating an Album Easy-PhotoPrint EX allows you to create your own personalized photo album. Steps 1. Starting Easy-PhotoPrint EX 2. Selecting the Paper and Layout 3. Selecting a Photo 4. Editing 5.
Starting Easy-PhotoPrint EX Стр. 105 из 396 стр. Advanced Guide > Printing from a Computer > Printing with the Bundled Application Software > Creating an Album > Starting Easy-PhotoPrint EX Starting Easy-PhotoPrint EX 1. From the Start menu, select (All) Programs > Canon Utilities > Easy-PhotoPrint EX > Easy-PhotoPrint EX. Easy-PhotoPrint EX starts and Menu appears.
Selecting the Paper and Layout Стр. 106 из 396 стр. Advanced Guide > Printing from a Computer > Printing with the Bundled Application Software > Creating an Album > Selecting the Paper and Layout Selecting the Paper and Layout 1. Click Album from Menu. The Page Setup screen appears. 2. Set the following items in the General Settings section: Paper Size Orientation Cover Double page album Page number Note See Help on the paper size that can be selected.
Selecting the Paper and Layout Стр. 107 из 396 стр. The album layouts that can be selected may vary depending on the Paper Size, Orientation, Double page album, or the type of page selected (front cover, inside pages or back cover). You can customize the date (position, size and color) in the Date Settings dialog box. To display the Date Settings dialog box, select the Print date checkbox in the Change Layout dialog box and click Date Settings.... 5.
Selecting a Photo Стр. 108 из 396 стр. Advanced Guide > Printing from a Computer > Printing with the Bundled Application Software > Creating an Album > Selecting a Photo Selecting a Photo 1. Click Select Images. The Select Images screen appears. 2. Select the folder that contains the image you want to print from the folder tree area. The images in the folder will be displayed as thumbnails (miniatures).
Selecting a Photo Стр. 109 из 396 стр.
Editing Стр. 110 из 396 стр. Advanced Guide > Printing from a Computer > Printing with the Bundled Application Software > Creating an Album > Editing Editing 1. Click Edit. The Edit screen appears. 2. Edit your album if necessary.
Editing Стр. 111 из 396 стр.
Printing Стр. 112 из 396 стр. Advanced Guide > Printing from a Computer > Printing with the Bundled Application Software > Creating an Album > Printing Printing 1. Click Print Settings. The Print Settings screen appears. 2. Set the following items according to the printer and paper to be used: Printer Media Type Copies Paper Source Print Quality Borderless Printing Note The media types may vary depending on the printer and the paper size.
Printing Стр. 113 из 396 стр.
Printing a DVD/CD Стр. 114 из 396 стр. Advanced Guide > Printing from a Computer > Printing with the Bundled Application Software > Printing a DVD/CD Printing a DVD/CD Select DVD/CD Label in Menu to start CD-LabelPrint. CD-LabelPrint allows you to print DVD/CD labels easily. For details on how to use CD-LabelPrint, install CD-LabelPrint and refer to the application's manual as follows. From the Start menu, select (All) Programs > CD-LabelPrint > Manual.
Printing Calendars Стр. 115 из 396 стр. Advanced Guide > Printing from a Computer > Printing with the Bundled Application Software > Printing Calendars Printing Calendars Easy-PhotoPrint EX allows you to create your own calendar using your favorite photos. Steps 1. Starting Easy-PhotoPrint EX 2. Selecting the Paper and Layout 3. Selecting a Photo 4. Editing 5.
Starting Easy-PhotoPrint EX Стр. 116 из 396 стр. Advanced Guide > Printing from a Computer > Printing with the Bundled Application Software > Printing Calendars > Starting Easy-PhotoPrint EX Starting Easy-PhotoPrint EX 1. From the Start menu, select (All) Programs > Canon Utilities > Easy-PhotoPrint EX > Easy-PhotoPrint EX. Easy-PhotoPrint EX starts and Menu appears.
Selecting the Paper and Layout Стр. 117 из 396 стр. Advanced Guide > Printing from a Computer > Printing with the Bundled Application Software > Printing Calendars > Selecting the Paper and Layout Selecting the Paper and Layout 1. Click Calendar from Menu. The Page Setup screen appears. 2. Set the following items in the General Settings section: Paper Size Orientation Start from Period Note See Help on the paper size that can be selected. You can add holidays to your calendar. Setting Holidays 3.
Selecting a Photo Стр. 118 из 396 стр. Advanced Guide > Printing from a Computer > Printing with the Bundled Application Software > Printing Calendars > Selecting a Photo Selecting a Photo 1. Click Select Images. The Select Images screen appears. 2. Select the folder that contains the image you want to print from the folder tree area. The images in the folder will be displayed as thumbnails (miniatures). 3. Select the image(s) you want to print and click (Import to Inside Pages).
Editing Стр. 119 из 396 стр. Advanced Guide > Printing from a Computer > Printing with the Bundled Application Software > Printing Calendars > Editing Editing 1. Click Edit. The Edit screen appears. 2. Edit the calendar if necessary.
Printing Стр. 120 из 396 стр. Advanced Guide > Printing from a Computer > Printing with the Bundled Application Software > Printing Calendars > Printing Printing 1. Click Print Settings. The Print Settings screen appears. 2. Set the following items according to the printer and paper to be used: Printer Media Type Copies Paper Source Print Quality Borderless Printing Note The media types may vary depending on the printer and the paper size.
Printing Stickers Стр. 121 из 396 стр. Advanced Guide > Printing from a Computer > Printing with the Bundled Application Software > Printing Stickers Printing Stickers You can print your favorite photos on compatible sticker sheets. Steps 1. Starting Easy-PhotoPrint EX 2. Selecting the Paper and Layout 3. Selecting a Photo 4. Editing 5.
Starting Easy-PhotoPrint EX Стр. 122 из 396 стр. Advanced Guide > Printing from a Computer > Printing with the Bundled Application Software > Printing Stickers > Starting Easy-PhotoPrint EX Starting Easy-PhotoPrint EX 1. From the Start menu, select (All) Programs > Canon Utilities > Easy-PhotoPrint EX > Easy-PhotoPrint EX. Easy-PhotoPrint EX starts and Menu appears.
Selecting the Paper and Layout Стр. 123 из 396 стр. Advanced Guide > Printing from a Computer > Printing with the Bundled Application Software > Printing Stickers > Selecting the Paper and Layout Selecting the Paper and Layout 1. Click Stickers from Menu. The Page Setup screen appears. 2. Set the following items in the General Settings section: Paper Size Orientation Print date Use the same image in all frames Note Paper sizes other than Photo Stickers cannot be selected.
Selecting a Photo Стр. 124 из 396 стр. Advanced Guide > Printing from a Computer > Printing with the Bundled Application Software > Printing Stickers > Selecting a Photo Selecting a Photo 1. Click Select Images. The Select Images screen appears. 2. Select the folder that contains the image you want to print from the folder tree area. The images in the folder will be displayed as thumbnails (miniatures). 3. Select the image(s) you want to print and click (Import to Inside Pages).
Editing Стр. 125 из 396 стр. Advanced Guide > Printing from a Computer > Printing with the Bundled Application Software > Printing Stickers > Editing Editing 1. Click Edit. The Edit screen appears. 2. Edit the stickers if necessary.
Printing Стр. 126 из 396 стр. Advanced Guide > Printing from a Computer > Printing with the Bundled Application Software > Printing Stickers > Printing Printing 1. Click Print Settings. The Print Settings screen appears. 2. Set the following items according to the printer and paper to be used: Printer Media Type Copies Paper Source Print Quality Borderless Printing Note The media types may vary depending on the printer and the paper size.
Printing Layout Стр. 127 из 396 стр. Advanced Guide > Printing from a Computer > Printing with the Bundled Application Software > Printing Layout Printing Layout You can add text to your favorite photos and print them in a variety of layouts. Steps 1. Starting Easy-PhotoPrint EX 2. Selecting the Paper and Layout 3. Selecting a Photo 4. Editing 5.
Starting Easy-PhotoPrint EX Стр. 128 из 396 стр. Advanced Guide > Printing from a Computer > Printing with the Bundled Application Software > Printing Layout > Starting Easy-PhotoPrint EX Starting Easy-PhotoPrint EX 1. From the Start menu, select (All) Programs > Canon Utilities > Easy-PhotoPrint EX > Easy-PhotoPrint EX. Easy-PhotoPrint EX starts and Menu appears.
Selecting the Paper and Layout Стр. 129 из 396 стр. Advanced Guide > Printing from a Computer > Printing with the Bundled Application Software > Printing Layout > Selecting the Paper and Layout Selecting the Paper and Layout 1. Click Layout Print from Menu. The Page Setup screen appears. 2. Set the following items in the General Settings section: Paper Size Orientation Print date Note See Help on the paper size that can be selected.
Selecting a Photo Стр. 130 из 396 стр. Advanced Guide > Printing from a Computer > Printing with the Bundled Application Software > Printing Layout > Selecting a Photo Selecting a Photo 1. Click Select Images. The Select Images screen appears. 2. Select the folder that contains the image you want to print from the folder tree area. The images in the folder will be displayed as thumbnails (miniatures). 3. Select the image(s) you want to print and click (Import to Inside Pages).
Editing Стр. 131 из 396 стр. Advanced Guide > Printing from a Computer > Printing with the Bundled Application Software > Printing Layout > Editing Editing 1. Click Edit. The Edit screen appears. 2. Edit the layout if necessary.
Printing Стр. 132 из 396 стр. Advanced Guide > Printing from a Computer > Printing with the Bundled Application Software > Printing Layout > Printing Printing 1. Click Print Settings. The Print Settings screen appears. 2. Set the following items according to the printer and paper to be used: Printer Media Type Copies Paper Source Print Quality Borderless Printing Note The media types may vary depending on the printer and the paper size.
Correcting and Enhancing Photos Стр. 133 из 396 стр. Advanced Guide > Printing from a Computer > Printing with the Bundled Application Software > Correcting and Enhancing Photos Correcting and Enhancing Photos You can correct and enhance images. (Correct/Enhance Images) in the Select Images or Edit screen, or in the Layout/Print screen of Click Photo Print. You can make the following corrections and enhancements in the Correct/Enhance Images window.
Using the Auto Photo Fix Function Стр. 134 из 396 стр. Advanced Guide > Printing from a Computer > Printing with the Bundled Application Software > Correcting and Enhancing Photos > Using the Auto Photo Fix Function Using the Auto Photo Fix Function Apply optimum corrections automatically to the photos used for an album or calendar. Important The Auto Photo Fix function is not available for Photo Print. Photo Print allows you to automatically apply suitable corrections to all photos when printing.
Using the Auto Photo Fix Function Стр. 135 из 396 стр. 4. Click Auto Photo Fix, then click OK. The entire photo is corrected automatically and the the upper left of the image. (Correction/Enhancement) mark appears on Note (Compare) to display the images before and after the correction side by side so that Click you can compare and check the result. Click Reset Selected Image to undo the correction operation.
Using the Red-Eye Correction Function Стр. 136 из 396 стр. Advanced Guide > Printing from a Computer > Printing with the Bundled Application Software > Correcting and Enhancing Photos > Using the Red-Eye Correction Function Using the Red-Eye Correction Function You can correct red eyes caused by a camera flash. You can perform the Red-Eye Correction function either automatically or manually. Note Photo Print allows you to automatically correct red eyes when printing.
Using the Red-Eye Correction Function Стр. 137 из 396 стр. 5. Click OK. Red eyes are corrected and the the image. (Correction/Enhancement) mark appears on the upper left of Important Areas other than the eyes may be corrected depending on the image. Note (Compare) to display the images before and after the correction side by side so that Click you can compare and check the result. Click Reset Selected Image to undo the correction operation.
Using the Red-Eye Correction Function Стр. 138 из 396 стр. 6. Click Save Selected Image or Save All Corrected Images. You can save corrected images as new files. Note To save only the image you like, click Save Selected Image. To save all images, click Save All Corrected Images. Only JPEG/Exif file format is available for corrected images. 7. Click Exit. Note The corrections will be lost if you exit before saving corrected images.
Using the Face Brightener Function Стр. 139 из 396 стр. Advanced Guide > Printing from a Computer > Printing with the Bundled Application Software > Correcting and Enhancing Photos > Using the Face Brightener Function Using the Face Brightener Function You can brighten dark faces caused by bright background. 1. Select photos in the Select Images screen, then click (Correct/Enhance Images). The Correct/Enhance Images window appears.
Using the Face Brightener Function Стр. 140 из 396 стр. 5. Drag to select the area you want to correct, then click OK that appears over the image. The entire image is corrected so that the selected area containing the face becomes brighter, and the (Correction/Enhancement) mark appears on the upper left of the image. Note You can also drag to rotate the rectangle. Click Undo to undo the preceding correction operation. Effect levels can be changed using the slider below Face Brightener. 6.
Using the Face Sharpener Function Стр. 141 из 396 стр. Advanced Guide > Printing from a Computer > Printing with the Bundled Application Software > Correcting and Enhancing Photos > Using the Face Sharpener Function Using the Face Sharpener Function You can sharpen out-of-focus faces in a photo. You can perform the Face Sharpener function either automatically or manually. 1. Select photos in the Select Images screen, then click (Correct/Enhance Images). The Correct/Enhance Images window appears.
Using the Face Sharpener Function Стр. 142 из 396 стр. Note Effect levels can be changed using the slider below Face Sharpener. (Compare) to display the images before and after the correction side by side so that Click you can compare and check the result. Click Reset Selected Image to undo the correction operation. If you want to apply the correction to all the selected images at once, select the Apply to all images checkbox. Manual Correction 3. Click Manual, then click Correct/Enhance. 4.
Using the Face Sharpener Function Стр. 143 из 396 стр. Only JPEG/Exif file format is available for corrected images. 7. Click Exit. Note The corrections will be lost if you exit before saving corrected images.
Using the Digital Face Smoothing Function Стр. 144 из 396 стр. Advanced Guide > Printing from a Computer > Printing with the Bundled Application Software > Correcting and Enhancing Photos > Using the Digital Face Smoothing Function Using the Digital Face Smoothing Function You can enhance skin beautifully by removing blemishes and wrinkles. You can perform the Digital Face Smoothing function either automatically or manually. 1.
Using the Digital Face Smoothing Function Стр. 145 из 396 стр. Note Effect levels can be changed using the slider below Digital Face Smoothing. (Compare) to display the images before and after the enhancement side by side so Click that you can compare and check the result. Click Reset Selected Image to undo the enhancement operation. If you want to apply the enhancement to all the selected images at once, select the Apply to all images checkbox. Manual Enhancement 3.
Using the Digital Face Smoothing Function Стр. 146 из 396 стр. Only JPEG/Exif file format is available for enhanced images. 7. Click Exit. Note The enhancements will be lost if you exit before saving enhanced images.
Using the Blemish Remover Function Стр. 147 из 396 стр. Advanced Guide > Printing from a Computer > Printing with the Bundled Application Software > Correcting and Enhancing Photos > Using the Blemish Remover Function Using the Blemish Remover Function You can remove moles. 1. Select photos in the Select Images screen, then click (Correct/Enhance Images). The Correct/Enhance Images window appears.
Using the Blemish Remover Function Стр. 148 из 396 стр. 5. Drag to select the area you want to enhance, then click OK that appears over the image. Moles in and around the selected area are removed and the appears on the upper left of the image. (Correction/Enhancement) mark Note Click Undo to undo the preceding enhancement operation. 6. Click Save Selected Image or Save All Corrected Images. You can save enhanced images as new files. Note To save only the image you like, click Save Selected Image.
Adjusting Images Стр. 149 из 396 стр. Advanced Guide > Printing from a Computer > Printing with the Bundled Application Software > Correcting and Enhancing Photos > Adjusting Images Adjusting Images You can make fine adjustments to the overall brightness, contrast, etc. of images. 1. Select photos in the Select Images screen, then click (Correct/Enhance Images). The Correct/Enhance Images window appears.
Adjusting Images Стр. 150 из 396 стр. Note Click Defaults to reset all adjustments. 5. Click Save Selected Image or Save All Corrected Images. You can save adjusted images as new files. Note To save only the image you like, click Save Selected Image. To save all images, click Save All Corrected Images. Only JPEG/Exif file format is available for adjusted images. 6. Click Exit. Note The adjustments will be lost if you exit before saving adjusted images.
Correct/Enhance Images Window Стр. 151 из 396 стр. Advanced Guide > Printing from a Computer > Printing with the Bundled Application Software > Correcting and Enhancing Photos > Correct/Enhance Images Window Correct/Enhance Images Window You can correct/enhance images in this window. To display the Correct/Enhance Images window, click (Correct/Enhance Images) in the Select Images or Edit screen, or in the Layout/Print screen of Photo Print.
Correct/Enhance Images Window (2)Task Area Available tasks and settings may vary between the Auto and Manual tabs. Click Auto or Manual to display the corresponding tab. Auto Tab Select to correct automatically. Auto Photo Fix Applies automatic corrections suitable for photos. Important The Auto Photo Fix function is not available for Photo Print. Photo Print allows you to automatically apply suitable corrections to all photos when printing.
Correct/Enhance Images Window Стр. 153 из 396 стр. Face Sharpener Sharpens out-of-focus faces. You can adjust the effect level using the slider. Digital Face Smoothing Enhances skin beautifully by removing blemishes and wrinkles. You can adjust the effect level using the slider. Apply to all images Automatically corrects all the images displayed in the list. OK Applies the selected effect to the selected image or all images.
Correct/Enhance Images Window Blur Blurs the outline of the subjects to soften the image. Move the slider to the right to soften the image. Show-through Removal Removes show-through of text from the reverse side or removes the base color. Adjust the showthrough level to prevent text on the reverse side of thin document or the base color of the document from appearing on the image. Move the slider to the right to increase the show-through removal effect.
Correct/Enhance Images Window Стр. 155 из 396 стр. Digital Face Smoothing Enhances skin beautifully by removing blemishes and wrinkles. You can specify the area you want to apply the effect to. You can adjust the effect level using the slider. Blemish Remover Removes moles. You can specify the area you want to apply the effect to. Undo Cancels the latest correction/enhancement. OK Applies the selected effect to the specified area.
Questions and Answers Стр. 156 из 396 стр.
How Can I Move (or Copy) the Saved File? Стр. 157 из 396 стр. Advanced Guide > Printing from a Computer > Printing with the Bundled Application Software > Questions and Answers > How Can I Move (or Copy) the Saved File? How Can I Move (or Copy) the Saved File? If you want to move (or copy) a file created and saved with Easy-PhotoPrint EX from one folder to another, you need to move (or copy) the folder that was automatically created when originally saving that file as well.
Which Side of the Displayed Image Does the Printing Start from? Стр. 158 из 396 стр. Advanced Guide > Printing from a Computer > Printing with the Bundled Application Software > Questions and Answers > Which Side of the Displayed Image Does the Printing Start from? Which Side of the Displayed Image Does the Printing Start from? As shown below, printing starts from the left side of the image displayed in the Layout/Print screen. Outputs the paper in the direction as the arrow indicates.
How Do I Print with Even Margins? Стр. 159 из 396 стр. Advanced Guide > Printing from a Computer > Printing with the Bundled Application Software > Questions and Answers > How Do I Print with Even Margins? How Do I Print with Even Margins? When you print on a bordered layout, the margins on the left and right or the top and bottom may become wider than the other, depending on the image and printer.
What Is "C1" or "C4"? Стр. 160 из 396 стр. Advanced Guide > Printing from a Computer > Printing with the Bundled Application Software > Questions and Answers > What Is "C1" or "C4"? What Is "C1" or "C4"? When an album is printed, labels such as "C1" and "C4" are printed as page numbers. The "C1" and "C4" represent the front cover and back cover, respectively.
Appendix 1: Easy-PhotoPrint EX Settings Стр. 161 из 396 стр.
Printing on a DVD/CD Advanced Guide > Printing from a Computer > Printing with the Bundled Application Software > Appendix 1: EasyPhotoPrint EX Settings > Printing on a DVD/CD Printing on a DVD/CD You can print on a DVD/CD using Photo Print. Select CD-R for Paper Size in the Select Paper screen, then select a layout and enter the title. If you want to edit the details, return to Menu and select DVD/CD Label and edit/print using CDLabelPrint.
Printing on a DVD/CD Стр. 163 из 396 стр. 3. Select a layout you want to use. 4. Enter the title(s) and specify the details of the layout in Advanced. Note Items that can be set may vary depending on the selected layout. 5. Click Print. Set a DVD/CD and print according to the message. Printing starts from the top of the image displayed in Preview. Important Do not install a CD-R tray until the message prompting you to set a DVD/CD appears.
Printing Vivid Photos Стр. 164 из 396 стр. Advanced Guide > Printing from a Computer > Printing with the Bundled Application Software > Appendix 1: EasyPhotoPrint EX Settings > Printing Vivid Photos Printing Vivid Photos Select the Vivid Photo checkbox in the Select Paper screen to boost the colors in a photo before printing. Important This function is available only with a printer that supports Vivid Photo.
Reducing Photo Noise Стр. 165 из 396 стр. Advanced Guide > Printing from a Computer > Printing with the Bundled Application Software > Appendix 1: EasyPhotoPrint EX Settings > Reducing Photo Noise Reducing Photo Noise When a photo is taken in a dark location such as night scene using digital camera, noise may appear in the image. Select the Photo Noise Reduction checkbox in the Select Paper screen to reduce noise in the image and make the printed photos more vivid.
Cropping Photos (Photo Print) Стр. 166 из 396 стр. Advanced Guide > Printing from a Computer > Printing with the Bundled Application Software > Appendix 1: EasyPhotoPrint EX Settings > Cropping Photos (Photo Print) Cropping Photos (Photo Print) Cropping a photo is the act of removing the unnecessary portions of the photo by selecting the necessary portions. Click (Crop Image) in the Layout/Print screen. Move the white frame to the portion to print and click OK.
Printing Dates on Photos (Photo Print) Стр. 167 из 396 стр. Advanced Guide > Printing from a Computer > Printing with the Bundled Application Software > Appendix 1: EasyPhotoPrint EX Settings > Printing Dates on Photos (Photo Print) Printing Dates on Photos (Photo Print) To print the date the photo was taken on the photo, click (Date Settings) in the Layout/Print screen, then select the Print date checkbox in the Date Settings dialog box.
Printing Multiple Photos on One Page Стр. 168 из 396 стр. Advanced Guide > Printing from a Computer > Printing with the Bundled Application Software > Appendix 1: EasyPhotoPrint EX Settings > Printing Multiple Photos on One Page Printing Multiple Photos on One Page You can print multiple photos on one page by selecting a multiple-photo layout in the Layout/Print screen. Note See the following section for details on how to select photos.
Printing an Index Стр. 169 из 396 стр. Advanced Guide > Printing from a Computer > Printing with the Bundled Application Software > Appendix 1: EasyPhotoPrint EX Settings > Printing an Index Printing an Index You can print an index of selected photos. An index print shows the thumbnails of the photos in one page. It is convenient for managing your photos. To print an index, select Index from the layouts in the Layout/Print screen. Note See the following section for details on how to select photos.
Printing ID Photos (ID Photo Print) Стр. 170 из 396 стр. Advanced Guide > Printing from a Computer > Printing with the Bundled Application Software > Appendix 1: EasyPhotoPrint EX Settings > Printing ID Photos (ID Photo Print) Printing ID Photos (ID Photo Print) You can print a variety of ID photos. Important The photo may not qualify as an official ID photo depending on its use. For details, contact the party to whom you will be submitting the photo.
Printing Photo Information Стр. 171 из 396 стр. Advanced Guide > Printing from a Computer > Printing with the Bundled Application Software > Appendix 1: EasyPhotoPrint EX Settings > Printing Photo Information Printing Photo Information Select Captured Info from the layouts in the Layout/Print screen to print the photo and the Exif information side by side. Note See the following section for details on how to select photos. Selecting a Photo This function is available only on paper sizes Letter 8.
Saving Photos Стр. 172 из 396 стр. Advanced Guide > Printing from a Computer > Printing with the Bundled Application Software > Appendix 1: EasyPhotoPrint EX Settings > Saving Photos Saving Photos You can save edited photos. The information of cropping and layout can be saved. Click Save in the Layout/Print screen. When the Save As dialog box appears, specify the save location and file name, then click Save. Important If you edit a saved file and save it again, the file will be overwritten.
Opening Saved Files Стр. 173 из 396 стр. Advanced Guide > Printing from a Computer > Printing with the Bundled Application Software > Appendix 1: EasyPhotoPrint EX Settings > Opening Saved Files Opening Saved Files You can open files created with Easy-PhotoPrint EX. 1. Click Library from Menu. The Open dialog box appears. You can check files created and saved with Easy-PhotoPrint EX by icon view (only for Windows Vista) or thumbnail view.
Opening Saved Files Стр. 174 из 396 стр. You can open files created with Easy-PhotoPrint EX with the following methods, besides from Library in Menu. - Double-click or click the file. - From the File menu, click Open..., then select the file you want to edit. You can also open a recently used file by clicking the file name shown in the File menu.
Changing Layout Стр. 175 из 396 стр. Advanced Guide > Printing from a Computer > Printing with the Bundled Application Software > Appendix 1: EasyPhotoPrint EX Settings > Changing Layout Changing Layout You can change the layout of each page separately. Select the page you want to change the layout of in the Edit screen, then click (Change Layout). Select the layout you want to use in the Change Layout dialog box and click OK.
Changing Layout Стр. 176 из 396 стр. Important The layouts that can be selected may vary depending on the Paper Size and Orientation. The layouts of all pages are changed to the selected layout. All images that do not fit in the new layout will be collected on one page. Layout Print Important The layouts that can be selected may vary depending on the Paper Size and Orientation.
Changing Background Стр. 177 из 396 стр. Advanced Guide > Printing from a Computer > Printing with the Bundled Application Software > Appendix 1: EasyPhotoPrint EX Settings > Changing Background Changing Background You can change the background of each page. Important You cannot change the background of the Photo Print, Stickers, and Layout Print. Select the page you want to change the background of in the Edit screen, then click Background).
Changing Background When Image file is Selected Set Image File Path and Image Layout, then click OK. Стр. 178 из 396 стр.
Changing Background Стр. 179 из 396 стр. Note See Help for details on how to set the background in the Change Background dialog box.
Adding Photos Стр. 180 из 396 стр. Advanced Guide > Printing from a Computer > Printing with the Bundled Application Software > Appendix 1: EasyPhotoPrint EX Settings > Adding Photos Adding Photos You can add images to pages. Select the page you want to add photos in the Edit screen, then click (Add Image). Note The screens for Album printing are used as examples in the following descriptions. The screens may vary depending on what you create.
Swapping Positions of Photos Стр. 181 из 396 стр. Advanced Guide > Printing from a Computer > Printing with the Bundled Application Software > Appendix 1: EasyPhotoPrint EX Settings > Swapping Positions of Photos Swapping Positions of Photos You can swap the positions of images. Click (Swap Image Positions) in the Edit screen. Note The screens for Album printing are used as examples in the following descriptions. The screens may vary depending on what you create.
Replacing Photos Стр. 182 из 396 стр. Advanced Guide > Printing from a Computer > Printing with the Bundled Application Software > Appendix 1: EasyPhotoPrint EX Settings > Replacing Photos Replacing Photos You can replace an image with another image. Select the image you want to replace in the Edit screen, then click (Replace Selected Image). Select the folder containing the image you want to replace with from the folder tree area on the left of the Replace Image dialog box.
Changing Position, Angle and Size of Photos Стр. 183 из 396 стр. Advanced Guide > Printing from a Computer > Printing with the Bundled Application Software > Appendix 1: EasyPhotoPrint EX Settings > Changing Position, Angle and Size of Photos Changing Position, Angle and Size of Photos You can adjust the position, angle and size of images. Select the image of which you want to change the position or size in the Edit screen and click Image) or double-click the image.
Cropping Photos Стр. 184 из 396 стр. Advanced Guide > Printing from a Computer > Printing with the Bundled Application Software > Appendix 1: EasyPhotoPrint EX Settings > Cropping Photos Cropping Photos Cropping an image is the act of removing the unnecessary portions of the image by selecting the necessary portions. Select the image you want to crop in the Edit screen and click (Edit Image) or double-click the image. Click the Crop tab in the Edit Image dialog box.
Framing Photos Стр. 185 из 396 стр. Advanced Guide > Printing from a Computer > Printing with the Bundled Application Software > Appendix 1: EasyPhotoPrint EX Settings > Framing Photos Framing Photos You can add frames to images. Important You cannot add frames to images in Photo Print, Stickers, and Layout Print. Select the image you want to frame in the Edit screen and click image. (Edit Image) or double-click the Click the Frame tab in the Edit Image dialog box.
Printing Dates on Photos Стр. 186 из 396 стр. Advanced Guide > Printing from a Computer > Printing with the Bundled Application Software > Appendix 1: EasyPhotoPrint EX Settings > Printing Dates on Photos Printing Dates on Photos You can print dates on images. Select the image you want to print the date in the Edit screen and click the image. (Edit Image) or double-click Click the Date tab in the Edit Image dialog box. Select the Show date checkbox.
Attaching Comments to Photos Стр. 187 из 396 стр. Advanced Guide > Printing from a Computer > Printing with the Bundled Application Software > Appendix 1: EasyPhotoPrint EX Settings > Attaching Comments to Photos Attaching Comments to Photos You can attach comments to images and display them in your album. The photo name, shooting date and comments are displayed (from top to bottom) in a comment box. Important You cannot attach comments to Photo Print, Calendar, Stickers, and Layout Print.
Attaching Comments to Photos Стр. 188 из 396 стр.
Adding Text to Photos Стр. 189 из 396 стр. Advanced Guide > Printing from a Computer > Printing with the Bundled Application Software > Appendix 1: EasyPhotoPrint EX Settings > Adding Text to Photos Adding Text to Photos You can add text to photos. Click (Add Text) in the Edit screen and drag the mouse over the area in which you want to add text. Note The screens for Album printing are used as examples in the following descriptions. The screens may vary depending on what you create.
Saving Стр. 190 из 396 стр. Advanced Guide > Printing from a Computer > Printing with the Bundled Application Software > Appendix 1: EasyPhotoPrint EX Settings > Saving Saving You can save edited items. Click Save in the Edit or Print Settings screen. Note The screens for Album printing are used as examples in the following descriptions. The screens may vary depending on what you create. When the Save As dialog box appears, specify the save location and file name, then click Save.
Setting Holidays Advanced Guide > Printing from a Computer > Printing with the Bundled Application Software > Appendix 1: EasyPhotoPrint EX Settings > Setting Holidays Setting Holidays You can add holidays to your calendar. Click Set Holidays... in the Page Setup screen of Calendar, or click (Setup Period/Holiday) in the Edit screen and click Set Holidays... in the Calendar General Settings dialog box to display the Holiday Settings dialog box. To add a holiday, click Add....
Setting Holidays Стр. 192 из 396 стр. See Help for details on each dialog box.
Setting Calendar Display Стр. 193 из 396 стр. Advanced Guide > Printing from a Computer > Printing with the Bundled Application Software > Appendix 1: EasyPhotoPrint EX Settings > Setting Calendar Display Setting Calendar Display You can customize the calendar display (fonts, lines, colors, position, size, etc.). Click Settings... in the Page Setup screen of Calendar, or select a calendar in the Edit screen and click (Setup Calendar) to display the Calendar Settings dialog box.
Printing with Other Application Software Стр. 194 из 396 стр.
Various Printing Methods Стр. 195 из 396 стр.
Printing with Easy Setup Стр. 196 из 396 стр. Advanced Guide > Printing from a Computer > Printing with Other Application Software > Various Printing Methods > Printing with Easy Setup Printing with Easy Setup The procedure for setting the basic print setup, which is necessary to print data properly with this printer, is as follows: 1. Open the printer driver setup window 2. Select the media type Select the type of paper loaded in the printer from the Media Type list on the Main tab. 3.
Setting a Page Size and Orientation Стр. 197 из 396 стр. Advanced Guide > Printing from a Computer > Printing with Other Application Software > Various Printing Methods > Setting a Page Size and Orientation Setting a Page Size and Orientation The paper size and orientation are essentially determined by the application. If the page size and orientation set for Page Size and Orientation on the Page Setup tab are same as those set with the application, you do not need to select them on the Page Setup tab.
Setting the Number of Copies and Printing Order Advanced Guide > Printing from a Computer > Printing with Other Application Software > Various Printing Methods > Setting the Number of Copies and Printing Order Setting the Number of Copies and Printing Order Default Setting Print from Last Page Collate Print from Last Page + Collate The procedure for specifying the number of copies and printing order is as follows: 1. Open the printer driver setup window 2.
Setting the Number of Copies and Printing Order Стр. 199 из 396 стр. If your application has the same function, make the settings with the application. If you specify the number of copies and the printing order with both the application and this printer driver, the number of copies may be multiplied numbers of the two settings or the specified printing order may not be enabled. Print from Last Page and Collate appear grayed out and are unavailable if Booklet Printing is selected for Page Layout.
Setting the Stapling Margin Advanced Guide > Printing from a Computer > Printing with Other Application Software > Various Printing Methods > Setting the Stapling Margin Setting the Stapling Margin The procedure for setting the stapling direction and the width of the stapling margin is as follows: 1. Open the printer driver setup window 2. Specify the side to be stapled Check the position of the stapling margin from Staple Side on the Page Setup tab.
Setting the Stapling Margin Стр. 201 из 396 стр. Poster Printing or Booklet Printing is selected for Page Layout. Scaled Printing is selected for Page Layout (If Duplex Printing is also selected, only Staple Side is selectable). Borderless Printing check box is checked (If Duplex Printing is also selected, only Staple Side is selectable).
Borderless Printing Стр. 202 из 396 стр. Advanced Guide > Printing from a Computer > Printing with Other Application Software > Various Printing Methods > Borderless Printing Borderless Printing The borderless printing function allows you to print data without any margin by enlarging the data so that it extends slightly off the paper. Without the borderless printing function, a margin is provided around the printed data.
Borderless Printing Стр. 203 из 396 стр. It is recommended to set the slider at the second position from the right for most cases. Important If you set the slider at the rightmost position, the back side of the paper may become smudged. 5. Complete the setup Click OK. The data will be printed without any margins on the paper. Important If a page size that cannot be used for borderless printing is selected, the size is automatically changed to the valid page sizes for borderless printing.
Fit-to-Page Printing Стр. 204 из 396 стр. Advanced Guide > Printing from a Computer > Printing with Other Application Software > Various Printing Methods > Fitto-Page Printing Fit-to-Page Printing The procedure for printing document, which is enlarged or reduced to fit to the page size, is as follows: 1. Open the printer driver setup window 2. Set fit-to-page printing Select Fit-to-Page Printing from the Page Layout list on the Page Setup tab. 3.
Fit-to-Page Printing Стр. 205 из 396 стр. 5. Complete the setup Click OK. When you execute print, the document will be enlarged or reduced to fit to the page size. Important When Borderless Printing check box is checked, Fit-to-Page Printing cannot be selected.
Scaled Printing Стр. 206 из 396 стр. Advanced Guide > Printing from a Computer > Printing with Other Application Software > Various Printing Methods > Scaled Printing Scaled Printing The procedure for printing a document with pages enlarged or reduced is as follows: 1. Open the printer driver setup window 2. Set scaled printing Select Scaled Printing from the Page Layout list on the Page Setup tab. 3.
Scaled Printing Стр. 207 из 396 стр. Specify a scaling factor Directly type in a value into the Scaling box. The current settings are displayed in the Settings Preview on the left side of the printer driver. 5. Complete the setup Click OK. When you execute print, the document will be printed with the specified scale. Important If the application software with which you created the original has the scaled printing function, configure the settings on your application software.
Page Layout Printing Стр. 208 из 396 стр. Advanced Guide > Printing from a Computer > Printing with Other Application Software > Various Printing Methods > Page Layout Printing Page Layout Printing The page layout printing function allows you to print more than one page image on a single sheet of paper. The procedure for performing page layout printing is as follows: 1. Open the printer driver setup window 2.
Page Layout Printing Стр. 209 из 396 стр. Pages To increase the number of pages to be included on a single sheet of paper, select a desired number of pages from the list. Page Order To change the page arrangement order, select an icon from the list to change the page placement order. Page Border To print a page border around each document page, check this check box. 5. Complete the setup Click OK on the Page Setup tab.
Poster Printing Стр. 210 из 396 стр. Advanced Guide > Printing from a Computer > Printing with Other Application Software > Various Printing Methods > Poster Printing Poster Printing The poster printing function allows you to enlarge image data, divide it into several pages, and print these pages on separate sheets of paper. When the pages are pasted together, they form a large print like a poster. The procedure for performing poster printing is as follows: Setting Poster Printing 1.
Poster Printing Image Divisions Select the number of divisions (vertical x horizontal) from the Image Divisions list. As the number of divisions increases, the number of sheets used for printing increases, allowing you to create a larger poster. Print "Cut/Paste" in margins To leave out words "Cut" and "Paste", uncheck this check box. Important This feature is unavailable when the 64-bit printer driver is used. Print "Cut/Paste" lines in margins To leave out cut lines, uncheck this check box.
Poster Printing Стр. 212 из 396 стр. Note Click the deleted pages to display them again. Right-click the Settings Preview to select Print all pages or Delete all pages. 2. Complete the setup After completing the page selection, click OK. When you execute print, only specified pages will be printed. Important When Poster Printing is selected, the Duplex Printing and Print from Last Page check boxes and the Staple Side list box appear grayed out and are unavailable.
Booklet Printing Стр. 213 из 396 стр. Advanced Guide > Printing from a Computer > Printing with Other Application Software > Various Printing Methods > Booklet Printing Booklet Printing The booklet printing function allows you to print data for a booklet. Data is printed on both sides of the paper. This type of printing ensures that pages can be collated properly, in page number order, when the printed sheets are folded and stapled at the center.
Booklet Printing Стр. 214 из 396 стр. Insert blank page To leave one side of a sheet blank, check Insert blank page check box, and select the page to be left blank. Margin Enter the margin width. The specified width from the center of the sheet becomes the margin for one page. Page Border To print a page border around each document page, check the Page Border check box. 5. Complete the setup Click OK on the Page Setup tab.
Duplex Printing Advanced Guide > Printing from a Computer > Printing with Other Application Software > Various Printing Methods > Duplex Printing Duplex Printing The procedure for printing data on both sides of a sheet of paper is as follows: Performing automatic duplex printing You can perform the duplex printing without having to turn over the paper. 1. Open the printer driver setup window 2.
Duplex Printing Use normal-size printing Print without reducing the page. Use reduced printing Reduce the page slightly during printing. 5. Specify the side to be stapled The printer analyzes the Orientation and Page Layout settings, and automatically selects the best Staple Side. If you want to change the setting, select another value from the list. 6. Set the margin width If necessary, click Specify Margin... and set the width of the stapling margin, and then click OK. 7.
Duplex Printing Стр. 217 из 396 стр. printing of one side is complete, set the paper correctly by following the message and click OK. The document will be printed on the opposite side. Important Duplex Printing is unavailable when: A media type other than Plain Paper or Hagaki is selected from the Media Type list. Poster Printing is selected from the Page Layout list. When Booklet Printing is selected from the Page Layout list, Duplex Printing and Staple Side appear grayed out and are unavailable.
Stamp/Background Printing Стр. 218 из 396 стр. Advanced Guide > Printing from a Computer > Printing with Other Application Software > Various Printing Methods > Stamp/Background Printing Stamp/Background Printing This feature is unavailable when the 64-bit printer driver is used. The Stamp function allows you to print a stamp text or a bitmap over or behind document data. The Background function allows you to print a light illustration behind the document data.
Stamp/Background Printing Стр. 219 из 396 стр. Note The stamp is given priority because the stamp is printed over the document data in the sections where the stamp and the document data overlap. If the Place stamp over text check box is unchecked, the stamp is printed behind the document data and may be hidden in the overlapping sections depending on the application used. Stamp first page only To print the stamp only on the first page, check this check box. Define Stamp...
Saving a Stamp Setting Advanced Guide > Printing from a Computer > Printing with Other Application Software > Various Printing Methods > Stamp/Background Printing > Saving a Stamp Setting Saving a Stamp Setting This feature is unavailable when the 64-bit printer driver is used. You can create and save a new stamp. You can also change and register some of the settings of an existing stamp. Unnecessary stamps can be deleted at any time.
Saving a Stamp Setting 4. Configure the stamp while viewing the preview window Stamp tab Select Text or Bitmap with Stamp Type. When registering a text, the characters must already be entered in Stamp Text. Change the True Type Font, Style, Size, and Outline settings, as necessary. You can select the color of the stamp by clicking Select Color.... For Bitmap, click Select File... and select the bitmap file (.bmp) to be used. Change the settings of the Size and Transparent white area if necessary.
Saving a Stamp Setting Стр. 222 из 396 стр. Click OK. The Stamp/Background dialog box opens again. The registered title appears in the Stamp list. Deleting an unnecessary stamp 1. Click Define Stamp... in the Stamp/Background dialog box The Stamp Settings dialog box opens. 2. Select the stamp to be deleted Select the title of the stamp you want to delete from the Stamps list on the Save settings tab. Then click Delete. Click OK when the confirmation message appears. 3. Complete the setup Click OK.
Saving Image Data to be Used as a Background Advanced Guide > Printing from a Computer > Printing with Other Application Software > Various Printing Methods > Stamp/Background Printing > Saving Image Data to be Used as a Background Saving Image Data to be Used as a Background This feature is unavailable when the 64-bit printer driver is used. You can select a bitmap file and save it as a new background. You can also change and register some of the settings of an existing background.
Saving Image Data to be Used as a Background Стр. 224 из 396 стр. 4. Select the image data to be registered to the background Click Select File.... Select the target image data (bitmap file), and then click Open. 5. Specify the following settings while viewing the preview window Layout Method Select how the background image data is to be placed. When Custom is selected, you can set coordinates for X-Position and Y-Position.
Saving Image Data to be Used as a Background Стр. 225 из 396 стр. Deleting an unnecessary background 1. Click Select Background... in the Stamp/Background dialog box The Background Settings dialog box opens. 2. Select the background to be deleted Select the title of the background you want to delete from the Backgrounds list on the Save settings tab, and then click Delete. Click OK when the confirmation message appears. 3. Complete the setup Click OK. The Stamp/Background dialog box opens again.
Printing an Envelope Стр. 226 из 396 стр. Advanced Guide > Printing from a Computer > Printing with Other Application Software > Various Printing Methods > Printing an Envelope Printing an Envelope For details on how to load an envelope into the machine, refer to the "Loading Envelopes" in the manual: Basic Guide. The procedure for performing envelope printing is as follows: 1. Load an envelop into the printer Fold down the envelope flap.
Switching the Paper Source to Match the Purpose Стр. 227 из 396 стр. Advanced Guide > Printing from a Computer > Printing with Other Application Software > Various Printing Methods > Switching the Paper Source to Match the Purpose Switching the Paper Source to Match the Purpose In this printer, there are two paper sources, a rear tray and a cassette. You can facilitate printing by selecting a paper source setting that matches your print conditions or purpose.
Switching the Paper Source to Match the Purpose Стр. 228 из 396 стр. Paper Allocation If the media type for the print data is plain paper and the paper size matches the paper allocation setting, the printer automatically feeds paper from the cassette. If not, the printer feeds paper from the rear tray. To change the paper allocation settings, click Paper Allocation..., specify the Paper Size to be loaded in the cassette, and then click OK.
Displaying the Print Results before Printing Стр. 229 из 396 стр. Advanced Guide > Printing from a Computer > Printing with Other Application Software > Various Printing Methods > Displaying the Print Results before Printing Displaying the Print Results before Printing You can display and check the print result before printing. The procedure for displaying the print result before printing is as follows: 1. Open the printer driver setup window 2.
Setting Paper Dimensions (Custom Size) Advanced Guide > Printing from a Computer > Printing with Other Application Software > Various Printing Methods > Setting Paper Dimensions (Custom Size) Setting Paper Dimensions (Custom Size) You can specify the height and width of paper if its size cannot be selected in Page Size. Such a paper size is called a custom size. The procedure for specifying a custom size is as follows: 1.
Setting Paper Dimensions (Custom Size) Стр. 231 из 396 стр.
Changing the Print Quality and Correcting Image Data Стр. 232 из 396 стр.
Selecting a Combination of the Print Quality Level and a Halftoning Method Стр. 233 из 396 стр. Advanced Guide > Printing from a Computer > Printing with Other Application Software > Changing the Print Quality and Correcting Image Data > Selecting a Combination of the Print Quality Level and a Halftoning Method Selecting a Combination of the Print Quality Level and a Halftoning Method You can set the print quality level and the halftoning method.
Selecting a Combination of the Print Quality Level and a Halftoning Method Стр. 234 из 396 стр. Halftones refer to color shades between the darkest color and the brightest color. The printer replaces the color shades with a collection of small dots to express the halftones. Dither arranges the dots according to fixed rules to express the halftones. Diffusion places the dots randomly to express the halftones.
Printing a Color Document in Monochrome Стр. 235 из 396 стр. Advanced Guide > Printing from a Computer > Printing with Other Application Software > Changing the Print Quality and Correcting Image Data > Printing a Color Document in Monochrome Printing a Color Document in Monochrome The procedure for printing a color document in monochrome is as follows: 1. Open the printer driver setup window 2. Set grayscale printing Check the Grayscale Printing check box on the Main tab. 3.
Specifying Color Correction Стр. 236 из 396 стр. Advanced Guide > Printing from a Computer > Printing with Other Application Software > Changing the Print Quality and Correcting Image Data > Specifying Color Correction Specifying Color Correction You can specify the color correction method suited to the type of document to be printed. Normally, the printer driver adjusts the colors by using Canon Digital Photo Color so that data is printed with color tints that most people prefer.
Specifying Color Correction Стр. 237 из 396 стр. Driver Matching By using Canon Digital Photo Color, you can print sRGB data with color tints that most people prefer. Driver Matching is the default setting for Color Correction. ICM You can print by using the color space of sRGB or Adobe RGB data effectively. None The printer driver does not perform color adjustment.
Optimal Photo Printing of Image Data Стр. 238 из 396 стр. Advanced Guide > Printing from a Computer > Printing with Other Application Software > Changing the Print Quality and Correcting Image Data > Specifying Color Correction > Optimal Photo Printing of Image Data Optimal Photo Printing of Image Data When people print images taken with digital cameras, they sometimes feel that the printed color tones differ from those of actual image or those displayed on the monitor.
Adjusting Colors with the Printer Driver Стр. 239 из 396 стр. Advanced Guide > Printing from a Computer > Printing with Other Application Software > Changing the Print Quality and Correcting Image Data > Specifying Color Correction > Adjusting Colors with the Printer Driver Adjusting Colors with the Printer Driver You can specify the color correction function of the printer driver to print sRGB data with color tints that most people prefer (through the use of Canon Digital Photo Color).
Adjusting Colors with the Printer Driver Стр. 240 из 396 стр. 6. Set the other items If necessary, click Color Adjustment tab, and adjust the color balance of Cyan, Magenta, Yellow, and adjust Brightness, Intensity, and Contrast settings, and then click OK. 7. Complete the setup Click OK on the Main tab. When you execute print, the printer driver adjusts the colors when printing the data.
Printing with ICC Profiles Стр. 241 из 396 стр. Advanced Guide > Printing from a Computer > Printing with Other Application Software > Changing the Print Quality and Correcting Image Data > Specifying Color Correction > Printing with ICC Profiles Printing with ICC Profiles If the image data has a specified ICC profile, you can effectively use the color space (Adobe RGB or sRGB) of the data when printing. The printer driver setting procedure varies depending on the application software used to print.
Printing with ICC Profiles Стр. 242 из 396 стр. 6. Set the other items If necessary, click Color Adjustment tab, and adjust the color balance of Cyan, Magenta, Yellow, and adjust Brightness, Intensity, and Contrast settings, and then click OK. 7. Complete the setup Click OK on the Main tab. When you execute print, the printer uses the color space of the image data.
Printing with ICC Profiles Стр. 243 из 396 стр. 3. Select the print quality Select High, Standard, or Fast for Print Quality. 4. Select the manual color adjustment Select Manual for Color/Intensity, and click Set.... Manual Color Adjustment dialog box opens. 5. Select color correction Click Matching tab, and select ICM for Color Correction. 6. Select the input profile Select an Input Profile that matches the color space of the image data. For sRGB data or data without an ICC profile: Select Standard.
Printing with ICC Profiles Стр. 244 из 396 стр.
Adjusting Color Balance Стр. 245 из 396 стр. Advanced Guide > Printing from a Computer > Printing with Other Application Software > Changing the Print Quality and Correcting Image Data > Adjusting Color Balance Adjusting Color Balance You can adjust the color tints during printing. Since this function adjusts color balance of the output by changing the ink ratios of each color, it changes the total color balance of the document.
Adjusting Color Balance Стр. 246 из 396 стр. 4. Complete the setup Click OK on the Main tab. When you execute print, the document is printed with the adjusted color balance. Important When the Grayscale Printing check box on the Main tab is checked, Cyan, Magenta, and Yellow appear grayed out and are unavailable.
Adjusting Brightness Стр. 247 из 396 стр. Advanced Guide > Printing from a Computer > Printing with Other Application Software > Changing the Print Quality and Correcting Image Data > Adjusting Brightness Adjusting Brightness You can change the brightness of the overall image data during printing. This function does not change pure white or pure black but it changes the brightness of the intermediate colors. The following sample shows the print result when the Brightness specification is changed.
Adjusting Brightness Стр. 248 из 396 стр. 4. Complete the setup Click OK on the Main tab. When you execute print, the data is printed at the specified brightness.
Adjusting Intensity Стр. 249 из 396 стр. Advanced Guide > Printing from a Computer > Printing with Other Application Software > Changing the Print Quality and Correcting Image Data > Adjusting Intensity Adjusting Intensity You can dilute (brighten) or intensify (darken) the colors of the overall image data during printing. If you want to sharpen the print results, you should intensify the colors.
Adjusting Intensity Стр. 250 из 396 стр. Important Adjust the slider gradually. 4. Complete the setup Click OK on the Main tab. When you execute print, the image data is printed with the adjusted intensity.
Adjusting Contrast Стр. 251 из 396 стр. Advanced Guide > Printing from a Computer > Printing with Other Application Software > Changing the Print Quality and Correcting Image Data > Adjusting Contrast Adjusting Contrast You can adjust the image contrast during printing. To make the differences between the light and dark portions of images greater and more distinct, increase the contrast.
Adjusting Contrast Стр. 252 из 396 стр. 4. Complete the setup Click OK on the Main tab. When you execute print, the image is printed with the adjusted contrast.
Simulating an Illustration Стр. 253 из 396 стр. Advanced Guide > Printing from a Computer > Printing with Other Application Software > Changing the Print Quality and Correcting Image Data > Simulating an Illustration Simulating an Illustration With the Simulate Illustration function, you can print full-color or 256-color image data so that it looks like a hand-drawn illustration. You can add different effects to the original profile and colors.
Representing Image Data with a Single Color Стр. 254 из 396 стр. Advanced Guide > Printing from a Computer > Printing with Other Application Software > Changing the Print Quality and Correcting Image Data > Representing Image Data with a Single Color Representing Image Data with a Single Color With the Monochrome Effects function, you can benefit from coloring effects such as changing a photograph to a sepia tone image. The procedure for performing Monochrome Effects is as follows: 1.
Presenting Image Data with Vivid Colors Стр. 255 из 396 стр. Advanced Guide > Printing from a Computer > Printing with Other Application Software > Changing the Print Quality and Correcting Image Data > Presenting Image Data with Vivid Colors Presenting Image Data with Vivid Colors The Vivid Photo function allows you to print image data with vivid colors. The notable feature of Vivid Photo is that it emphasizes the colors in background sceneries while maintaining the human skin color natural.
Smoothing Jagged Outlines Стр. 256 из 396 стр. Advanced Guide > Printing from a Computer > Printing with Other Application Software > Changing the Print Quality and Correcting Image Data > Smoothing Jagged Outlines Smoothing Jagged Outlines The Image Optimizer function allows you to smooth jagged outlines in photos and graphics that have been enlarged with your application. This feature is especially useful when printing low-resolution images from Web pages.
Changing Color Properties to Improve Coloration Стр. 257 из 396 стр. Advanced Guide > Printing from a Computer > Printing with Other Application Software > Changing the Print Quality and Correcting Image Data > Changing Color Properties to Improve Coloration Changing Color Properties to Improve Coloration The Photo Optimizer PRO function corrects colors of digital camera images or scanned images. It is specially designed to compensate for color shift, overexposure, and underexposure.
Changing Color Properties to Improve Coloration Стр. 258 из 396 стр. Note Depending on images, the Photo Optimizer PRO may have no discernible effect.
Reducing Photo Noise Стр. 259 из 396 стр. Advanced Guide > Printing from a Computer > Printing with Other Application Software > Changing the Print Quality and Correcting Image Data > Reducing Photo Noise Reducing Photo Noise With the Photo Noise Reduction function, you can reduce the digital camera noise and improve the image quality of the digital print. The procedure for performing Photo Noise Reduction is as follows: 1. Open the printer driver setup window 2.
Overview of the Printer Driver Стр. 260 из 396 стр.
Canon IJ Printer Driver Стр. 261 из 396 стр. Advanced Guide > Printing from a Computer > Printing with Other Application Software > Overview of the Printer Driver > Canon IJ Printer Driver Canon IJ Printer Driver The Canon IJ printer driver is software that is installed on your computer for printing data on this printer. The Canon IJ printer driver converts the print data created by your Windows application into data that your printer can understand and sends the converted data to the printer.
How to Open the Printer Driver Setup Window Стр. 262 из 396 стр. Advanced Guide > Printing from a Computer > Printing with Other Application Software > Overview of the Printer Driver > Canon IJ Printer Driver > How to Open the Printer Driver Setup Window How to Open the Printer Driver Setup Window The printer driver setup window can be displayed through the application software in use or the Start menu of the Windows. Note This guide mainly describes operations on the Windows Vista.
Maintenance Tab Стр. 263 из 396 стр. Advanced Guide > Printing from a Computer > Printing with Other Application Software > Overview of the Printer Driver > Canon IJ Printer Driver > Maintenance Tab Maintenance Tab The Maintenance tab allows you to perform printer maintenance or change the settings of the printer.
Canon IJ Status Monitor Стр. 264 из 396 стр. Advanced Guide > Printing from a Computer > Printing with Other Application Software > Overview of the Printer Driver > Canon IJ Status Monitor Canon IJ Status Monitor The Canon IJ Status Monitor is an application software that shows the status of the printer and the progress of printing on the Windows screen. You will know the status of the printer with graphics, icons, and messages.
The Canon IJ Preview Стр. 265 из 396 стр. Advanced Guide > Printing from a Computer > Printing with Other Application Software > Overview of the Printer Driver > The Canon IJ Preview The Canon IJ Preview The Canon IJ Preview is an application software that displays what the print result will look like before a document is actually printed. The preview reflects the information that is set within the printer driver and allows you to check the document layout, print sequence, and number of pages.
Printing on DVD/CDs Стр. 266 из 396 стр.
Printing on the Label Side of DVD/CDs Стр. 267 из 396 стр.
Items to Prepare Стр. 268 из 396 стр. Advanced Guide > Printing on DVD/CDs > Printing on the Label Side of DVD/CDs > Items to Prepare Items to Prepare The following items are needed to print on DVD/CDs: CD-R Tray "G" is on the upper side. 8 cm CD-R Adapter Needed only when printing on 8 cm DVD/CDs. Attached to the CD-R Tray when shipped. Important You cannot print on 8 cm DVD/CDs from a PictBridge compliant device. You need to print from the computer to print on 8 cm DVD/CDs.
Cautions When Printing on DVD/CDs Стр. 269 из 396 стр. Advanced Guide > Printing on DVD/CDs > Printing on the Label Side of DVD/CDs > Cautions When Printing on DVD/CDs Cautions When Printing on DVD/CDs Be sure to use the CD-R Tray supplied with this printer. It has an "G" on the upper side. Do not print on DVD/CDs that are not compatible with ink-jet printing. The ink will not dry and may cause problems with the disc itself or devices which the disc is loaded onto.
Attaching/Removing the CD-R Tray Стр. 270 из 396 стр. Advanced Guide > Printing on DVD/CDs > Printing on the Label Side of DVD/CDs > Attaching/Removing the CD-R Tray Attaching/Removing the CD-R Tray Attaching the CD-R Tray 1. Open the Paper Output Tray (A), then open the Inner Cover (B). 2. Place the DVD/CD. Important Make sure that there is no dirt on the CD-R Tray before placing the DVD/CD on the CD-R Tray.
Attaching/Removing the CD-R Tray Стр. 271 из 396 стр. 2. Place the 8 cm disc on the CD-R Tray with the printing surface facing up. 3. Place the CD-R Tray. Important Do not attach the CD-R Tray until the message asking you to load the DVD/CD is displayed. Doing so can damage the printer. Note The CD-R Tray may be ejected after a specified period of time has elapsed. In this case, follow the on-screen instructions to place the CD-R Tray. 4.
Attaching/Removing the CD-R Tray Removing the CD-R Tray 1. Pull out the CD-R Tray. 2. Close the Inner Cover. Important If the Inner Cover is opened, you cannot print on paper as it will not feed properly. Make sure that the Inner Cover is closed. 3. Remove the DVD/CD. Caution Do not touch the printable surface when removing the disc from the CD-R Tray. Note Dry the printing surface sufficiently before removing the disc.
Attaching/Removing the CD-R Tray Стр. 273 из 396 стр. 2. Remove the 8 cm disc from the CD-R Tray.
Printing on the Label Side of DVD/CDs Стр. 274 из 396 стр. Advanced Guide > Printing on DVD/CDs > Printing on the Label Side of DVD/CDs > Printing on the Label Side of DVD/CDs Printing on the Label Side of DVD/CDs The CD-R Tray (supplied) allows the printing of images on printable DVD/CDs. CD-LabelPrint is bundled application software that allows you to edit and modify data before printing. Install it on your computer to use it.
Printing with CD-LabelPrint from the Computer Стр. 275 из 396 стр. Advanced Guide > Printing on DVD/CDs > Printing on the Label Side of DVD/CDs > Printing with CD-LabelPrint from the Computer Printing with CD-LabelPrint from the Computer CD-LabelPrint is bundled application software that allows you to edit and modify data before printing. Install it on your computer to use it. For information on how to install this software, refer to your setup manual.
Printing from a PictBridge Compliant Device Стр. 276 из 396 стр. Advanced Guide > Printing on DVD/CDs > Printing on the Label Side of DVD/CDs > Printing from a PictBridge Compliant Device Printing from a PictBridge Compliant Device This section describes how to print photos on DVD/CDs (printable discs) from a PictBridge compliant device. Important Depending on your PictBridge compliant device, you may not be able to print on the label side of DVD/CDs.
Printing Area Стр. 277 из 396 стр. Advanced Guide > Printing on DVD/CDs > Printing on the Label Side of DVD/CDs > Printing Area Printing Area Printable DVD/CDs The printing area of both printable DVDs and CDs is the area excluding the 1 mm area from the internal and external diameters of the label.
Troubleshooting Стр. 278 из 396 стр.
Message Appears on the Computer Screen Advanced Guide > Printing on DVD/CDs > Troubleshooting > Message Appears on the Computer Screen Message Appears on the Computer Screen Errors About DVD/CD Printing Are Displayed Message: 1001 Is Displayed Error Number: 1002 Is Displayed Message: 1850 Is Displayed Errors About DVD/CD Printing Are Displayed Check 1: Is the CD-R Tray placed properly? Open the Inner Cover, properly place the CD-R Tray again, then press the RESUME/CANCEL button.
Message Appears on the Computer Screen Стр. 280 из 396 стр. For details on how to place the CD-R Tray, see Attaching/Removing the CD-R Tray . Error Number: 1002 Is Displayed Check 1: Place the DVD/CD on the CD-R Tray properly. Place the DVD/CD on the CD-R Tray properly, then press the RESUME/CANCEL button on the printer. Make sure that you are using the CD-R Tray supplied with the printer ("G" is on the upper side). For details on how to place the CD-R Tray, see Attaching/Removing the CD-R Tray .
Cannot Print on DVD/CDs Advanced Guide > Printing on DVD/CDs > Troubleshooting > Cannot Print on DVD/CDs Cannot Print on DVD/CDs DVD/CD Printing Does Not Start CD-R Tray Does Not Feed Properly CD-R Tray Jammed DVD/CD Printing Does Not Start Check 1: Is the CD-R Tray placed properly? Open the Inner Cover, properly place the CD-R Tray again, then press the RESUME/CANCEL button. Use the CD-R Tray supplied with this printer ("G" is on the upper side).
Cannot Print on DVD/CDs Стр. 282 из 396 стр. Note If you left cleared Detects a printable disc in the CD-R tray check box and start printing another DVD/CD, printing may start without the DVD/CD loaded. Selecting the check box prevents the CD-R Tray from getting dirty. CD-R Tray Jammed Pull out the CD-R Tray gently. If the CD-R Tray cannot be pulled out, turn the printer off and then turn the printer back on again. The CD-R Tray will automatically be ejected.
Error Message Appears on a PictBridge Compliant Device Стр. 283 из 396 стр. Advanced Guide > Printing on DVD/CDs > Troubleshooting > Error Message Appears on a PictBridge Compliant Device Error Message Appears on a PictBridge Compliant Device The following are the possible errors that may occur when printing directly from a PictBridge compliant device and the countermeasures to clear them.
Printing Photographs Directly from a Compliant Device Стр. 284 из 396 стр.
Printing Photographs Directly from a Compliant Device Стр. 285 из 396 стр.
Printing Photographs Directly from a Compliant Device Стр. 286 из 396 стр.
Printing Photographs Directly from a Compliant Device Стр. 287 из 396 стр. size and type of paper that you loaded in the printer. Settings on a PictBridge Compliant Device 6. Start printing from your PictBridge compliant device. Important Never disconnect the USB cable during printing unless when explicitly allowed to by the PictBridge compliant device. When disconnecting the USB cable between the PictBridge compliant device and printer, follow the instructions given in the device's instruction manual.
About PictBridge Print Settings Advanced Guide > Printing Photographs Directly from a Compliant Device > Printing Photographs Directly from a Compliant Device > About PictBridge Print Settings About PictBridge Print Settings Settings on a PictBridge Compliant Device This section describes the PictBridge function of the printer. For the print settings on a PictBridge compliant device, refer to the instructions given in the device's instruction manual.
About PictBridge Print Settings Стр. 289 из 396 стр.
Maintenance Стр. 290 из 396 стр.
Cleaning Your Printer Стр. 291 из 396 стр.
Cleaning Стр. 292 из 396 стр. Advanced Guide > Maintenance > Cleaning Your Printer > Cleaning Cleaning This section describes the cleaning procedure that is needed to maintain your printer. Caution Do not use tissue paper, paper towels, rough-textured cloth, or similar materials for cleaning so as not to scratch the surface. Paper tissue powders or fine threads may remain inside the printer and cause problems such as Print Head blockage and poor printing results. Be sure to use a soft cloth.
Cleaning the Exterior of the Printer Стр. 293 из 396 стр. Advanced Guide > Maintenance > Cleaning Your Printer > Cleaning the Exterior of the Printer Cleaning the Exterior of the Printer Be sure to use a soft cloth such as eyeglasses cleaning cloth and wipe off dirt on the surface gently. Smooth out wrinkles on the cloth if necessary before cleaning. Caution Be sure to turn off the power and disconnect the power plug before cleaning the printer.
Cleaning the Protrusions Inside the Printer Стр. 294 из 396 стр. Advanced Guide > Maintenance > Cleaning Your Printer > Cleaning the Protrusions Inside the Printer Cleaning the Protrusions Inside the Printer If protrusions inside the printer are stained, wipe off any ink from the protrusions using a cotton swab or the like. Caution Be sure to turn off the power and disconnect the power plug before cleaning the printer.
Performing Maintenance from a Computer Стр. 295 из 396 стр.
Cleaning the Print Heads Стр. 296 из 396 стр. Advanced Guide > Maintenance > Performing Maintenance from a Computer > Cleaning the Print Heads Cleaning the Print Heads The print head cleaning function allows you to remove any blockages in the print head nozzles. Perform print head cleaning if printing is faint or a specific color fails to print, even though there is enough ink. The procedure for cleaning the print heads is as follows: Cleaning 1. Open the printer driver setup window 2.
Cleaning the Print Heads Стр. 297 из 396 стр. If there is no sign of improvement after Deep Cleaning, switch off the printer, wait 24 hours, and then perform Deep Cleaning again. If there is still no sign of improvement, the ink may have run out or the print head may be worn. For details on the remedial action to be taken, see " Printer Moves But Ink Is Not Ejected .
Cleaning the Paper Feed Rollers Стр. 298 из 396 стр. Advanced Guide > Maintenance > Performing Maintenance from a Computer > Cleaning the Paper Feed Rollers Cleaning the Paper Feed Rollers The feed roller cleaning function allows you to clean the paper feed roller. Perform feed roller cleaning when there are paper particles sticking to the paper feed roller and paper is not fed properly. The procedure for cleaning the feed rollers is as follows: Roller cleaning 1.
Aligning the Print Head Position Стр. 299 из 396 стр. Advanced Guide > Maintenance > Performing Maintenance from a Computer > Aligning the Print Head Position Aligning the Print Head Position Print head alignment corrects the installation positions of the print head and improves deviated colors and lines. This printer supports two head alignment methods: automatic head alignment and manual head alignment. Normally, the printer is set for automatic head alignment.
Manual Print Head Alignment Advanced Guide > Maintenance > Performing Maintenance from a Computer > Manual Print Head Alignment Manual Print Head Alignment This section describes how to align the Print Head manually. If the results of Automatic Print Head Alignment are not satisfactory, follow the procedure below to perform Manual Print Head Alignment to precisely align the Print Head. For details on performing Automatic Print Head Alignment, see Routine Maintenance .
Manual Print Head Alignment Note If it is difficult to pick the best pattern, pick the setting that produces the least noticeable vertical white streaks. (A) Less noticeable vertical white streaks (B) More noticeable vertical white streaks 2. Repeat the procedure until you finish inputting the pattern number for column G, then click OK. For column F and G, pick the setting that produces the least noticeable horizontal streaks.
Manual Print Head Alignment Note If it is difficult to pick the best pattern, pick the setting that produces the least noticeable vertical white streaks. (E) Less noticeable vertical white streaks (F) More noticeable vertical white streaks 2. Repeat the procedure until you finish inputting the pattern number for column Q, then click OK. 3. Confirm the displayed message and click OK. The third pattern is printed. Important Do not open the Top Cover while printing is in progress. 7.
Manual Print Head Alignment Note If it is difficult to pick the best pattern, pick the setting that produces the least noticeable horizontal streaks. (G) Less noticeable horizontal white streaks (H) More noticeable horizontal white streaks 2. Repeat the procedure until you finish inputting the pattern number for column j, then click OK. 3. Confirm the displayed message and click OK. 1. Make sure that the printer is turned on. 2. Load four sheets of A4 or Letter-sized plain paper in the Cassette. 3.
Manual Print Head Alignment Important Do not open the Top Cover while printing is in progress. Note Clicking Print Alignment Value prints the current settings and finishes Print Head Alignment. 6. Look at the first printout and adjust the print head position. 1. Check the printed patterns and select the number of the pattern in column A that has the least noticeable vertical streaks.
Manual Print Head Alignment (C) Less noticeable horizontal white streaks (D) More noticeable horizontal white streaks 3. Confirm the displayed message and click OK. The second pattern is printed. Important Do not open the Top Cover while printing is in progress. 7. Look at the second printout and adjust the print head position. 1. Check the printed patterns and select the number of the pattern in column H that has the least noticeable vertical streaks.
Manual Print Head Alignment Стр. 306 из 396 стр. Note If it is difficult to pick the best pattern, pick the setting that produces the least noticeable horizontal streaks. (G) Less noticeable horizontal white streaks (H) More noticeable horizontal white streaks 2. Repeat the procedure until you finish inputting the pattern number for column j, then click Send.
Checking the Print Head Nozzles Стр. 307 из 396 стр. Advanced Guide > Maintenance > Performing Maintenance from a Computer > Checking the Print Head Nozzles Checking the Print Head Nozzles The nozzle check function allows you to check whether the print heads are working properly by printing a nozzle check pattern. Print the pattern if printing becomes faint, or if a specific color fails to print. The procedure for printing a nozzle check pattern is as follows: Nozzle Check 1.
Cleaning Inside the Printer Стр. 308 из 396 стр. Advanced Guide > Maintenance > Performing Maintenance from a Computer > Cleaning Inside the Printer Cleaning Inside the Printer The bottom plate cleaning function allows you to prevent smudges on the reverse side of a sheet of paper. Perform bottom plate cleaning before you perform duplex printing. Also perform bottom plate cleaning if ink smudges caused by something other than print data appear on the printed page.
Changing the Printer Settings Стр. 309 из 396 стр.
Changing Printer Settings from Your Computer Стр. 310 из 396 стр.
Changing the Print Options Стр. 311 из 396 стр. Advanced Guide > Changing the Printer Settings > Changing Printer Settings from Your Computer > Changing the Print Options Changing the Print Options You change detailed print driver settings for print data that is sent from an application software. With some applications, part of the image data may be cut off, the paper source during printing may differ from the driver settings, or printing may fail.
Saving a Changed Printing Profile Стр. 312 из 396 стр. Advanced Guide > Changing the Printer Settings > Changing Printer Settings from Your Computer > Saving a Changed Printing Profile Saving a Changed Printing Profile You can assign a name to the settings made on the Main, Page Setup, and Effects tabs and save them as a printing profile. The saved printing profile can be retrieved and used from the Profiles tab at any time. Unnecessary printing profiles can be deleted at any time.
Saving a Changed Printing Profile Стр. 313 из 396 стр. registered will be deleted from Printing Profiles. Registered print settings cannot be saved and preserved. In this case, register the print settings again. Using registered print settings 1. Select the print settings to be used Select a printing profile in the Printing Profiles list on the Profiles tab. The parameters and settings of the profile are displayed in the Details box. 2. Retrieve from Profiles Click Retrieve from Profiles.
Setting the Paper Source for Plain Paper Стр. 314 из 396 стр. Advanced Guide > Changing the Printer Settings > Changing Printer Settings from Your Computer > Setting the Paper Source for Plain Paper Setting the Paper Source for Plain Paper When you select Automatically Select from Paper Source, you can use the printer driver to select the paper source for plain paper. The procedure for setting the paper source is as follows: Paper Source Setting for Plain Paper 1.
Managing the Printer Power Стр. 315 из 396 стр. Advanced Guide > Changing the Printer Settings > Changing Printer Settings from Your Computer > Managing the Printer Power Managing the Printer Power This function allows you to manage the printer power from the printer driver. The procedure for managing the printer power is as follows: Power Off The Power Off function turns off the printer. If you use this function, you will not be able to turn the printer on from the printer driver. 1.
Managing the Printer Power Стр. 316 из 396 стр. disabled, "Printer is offline" is displayed.
Reducing the Printer Noise Стр. 317 из 396 стр. Advanced Guide > Changing the Printer Settings > Changing Printer Settings from Your Computer > Reducing the Printer Noise Reducing the Printer Noise This function allows you to reduce the operating noise of the printer. Select if you wish to reduce the operating noise of the printer at night, etc. Using this function may lower the print speed. The procedure for changing the quiet mode settings is as follows: Quiet Mode 1.
Changing the Printer Operation Mode Стр. 318 из 396 стр. Advanced Guide > Changing the Printer Settings > Changing Printer Settings from Your Computer > Changing the Printer Operation Mode Changing the Printer Operation Mode This function allows you to switch between various modes of printer operation. The procedure for changing the printer settings is as follows: Custom Settings 1. Open the printer driver setup window 2.
Troubleshooting Стр. 319 из 396 стр.
If an Error Occurs Advanced Guide > Troubleshooting > If an Error Occurs If an Error Occurs When an error occurs in printing such as the printer is out of paper or paper is jammed, a troubleshooting message is displayed automatically. Take the appropriate action described in the message. The message may vary depending on the version of your operating system. In Mac OS X v.10.5.x: In Mac OS X v.10.4.x or Mac OS X v.10.3.9: Стр. 320 из 396 стр.
If an Error Occurs Стр. 321 из 396 стр.
The Printer Cannot Be Powered On Стр. 322 из 396 стр. Advanced Guide > Troubleshooting > The Printer Cannot Be Powered On The Printer Cannot Be Powered On Check 1: Press the Power button. Check 2: Make sure that the power plug is securely plugged into the Power Cord Connector of the printer, then turn the printer back on. Check 3: Unplug the printer from the power supply, then plug the printer back in and turn the printer back on after leaving it for at least 5 minutes.
Alarm Lamp Flashes Orange Стр. 323 из 396 стр. Advanced Guide > Troubleshooting > Alarm Lamp Flashes Orange Alarm Lamp Flashes Orange When a printer error occurs, the Alarm lamp flashes orange as shown below. The number of flashes indicates the type of error that has occurred. Count the flashes and take the appropriate action to correct the error. (A) Note the number of flashes (B) Flashes repeatedly Number of flashes/Cause Action Two flashes: Printer is out of paper./Paper does not feed.
Alarm Lamp Flashes Orange Стр. 324 из 396 стр. during Print Head Cleaning. Press the RESUME/CANCEL button on the printer to cancel the error so you can continue printing. Before the ink absorber becomes completely full, contact a Canon service representative. (You will need to replace a particular part of the printer.) Nine flashes: The printer has not received a response from the digital camera. The digital camera or digital video camcorder connected is not compatible with this printer.
Alarm Lamp Flashes Orange Стр. 325 из 396 стр. damage caused by refilled ink tanks. Routine Maintenance Note If the function for detecting the remaining ink level is disabled, the ink tank is displayed in gray on the printer status monitor (Windows) and Canon IJ Printer Utility (Macintosh). Routine Maintenance Fourteen Flashes: Ink tank cannot be recognized. The ink tank is not compatible with this printer. (The lamp on the ink tank is off.) Install an appropriate ink tank.
Power Lamp Flashes Green and Alarm Lamp Flashes Orange Alternately Стр. 326 из 396 стр. Advanced Guide > Troubleshooting > Power Lamp Flashes Green and Alarm Lamp Flashes Orange Alternately Power Lamp Flashes Green and Alarm Lamp Flashes Orange Alternately A printer problem has occurred. Disconnect the printer cable from the printer, turn the printer off, and then unplug the printer from the power supply. Plug the printer back in and turn the printer back on.
Cannot Install the Printer Driver Стр. 327 из 396 стр. Advanced Guide > Troubleshooting > Cannot Install the Printer Driver Cannot Install the Printer Driver If the installation does not start even after the Setup CD-ROM is inserted into your computer's disc drive: Start the installation following the procedure below. 1. Click Start then Computer. In Windows XP, click Start then My Computer. In Windows 2000, double-click the 2. Double-click the My Computer icon on the desktop.
Cannot Install the Printer Driver Стр. 328 из 396 стр. the procedure below to reinstall the printer driver. Note In Windows Vista, "The printer is not detected. Check the connection." may be displayed depending on the computer you use. In this case, wait for a while. If you still cannot proceed to the next step, follow the procedure below to reinstall the printer driver. 1. Click Cancel on the Printer Connection screen. 2. Click Start Over on the Installation Failure screen. 3.
Cannot Connect to Computer Properly Стр. 329 из 396 стр. Advanced Guide > Troubleshooting > Cannot Connect to Computer Properly Cannot Connect to Computer Properly Printing Speed Is Slow/Hi-Speed USB Connection Does Not Work/ can perform faster" Message Is Displayed "This device If your system environment is not fully compatible with Hi-Speed USB, the printer will operate at a lower speed provided under USB 1.1.
Print Results Not Satisfactory Стр. 330 из 396 стр. Advanced Guide > Troubleshooting > Print Results Not Satisfactory Print Results Not Satisfactory If the print result is not satisfactory due to white streaks, misaligned lines, or uneven colors, confirm the paper and print quality settings first. Check 1: Do the page size and media type settings match the size and type of the loaded paper? When these settings are incorrect, you cannot obtain a proper print result.
Cannot Print to End of Job Стр. 331 из 396 стр. Advanced Guide > Troubleshooting > Print Results Not Satisfactory > Cannot Print to End of Job Cannot Print to End of Job Check 1: Is the size of the print data extremely large? Click Print Options on the Page Setup sheet. Then, select the Prevent loss of print data check box in the displayed dialog. Check 2: Is the space of your computer's hard disk sufficient? Delete unnecessary files to free disk space.
Part of the Page Is Not Printed Стр. 332 из 396 стр. Advanced Guide > Troubleshooting > Print Results Not Satisfactory > Part of the Page Is Not Printed Part of the Page Is Not Printed Check: When performing automatic duplex printing, the reason below is possible. When performing automatic duplex printing, the printable area at the top of the page will be 0.08 inches / 2 mm narrower than the usual. For this reason, the bottom of the page may not be printed.
No Printing Results/Printing Is Blurred/Colors Are Wrong/White Streaks Стр. 333 из 396 стр. Advanced Guide > Troubleshooting > Print Results Not Satisfactory > No Printing Results/Printing Is Blurred/Colors Are Wrong/White Streaks No Printing Results/Printing Is Blurred/Colors Are Wrong/White Streaks Check 1: Did you confirm the paper and print quality settings? Print Results Not Satisfactory Check 2: Check the status of ink tanks.
No Printing Results/Printing Is Blurred/Colors Are Wrong/White Streaks Стр. 334 из 396 стр. has run out. Routine Maintenance Check 3: Is the orange tape or protective film remaining? Make sure that all of the protective film is peeled off and the air hole is exposed, as illustrated in (A). If the orange tape is left as in (B), pull the orange tape and remove it. Check 4: Print the Nozzle Check Pattern and perform any necessary maintenance operations such as Print Head Cleaning.
Lines Are Misaligned Стр. 335 из 396 стр. Advanced Guide > Troubleshooting > Print Results Not Satisfactory > Lines Are Misaligned Lines Are Misaligned Check 1: Did you confirm the paper and print quality settings? Print Results Not Satisfactory Check 2: Perform Print Head Alignment If you did not align the Print Head after installation, straight lines may be printed misaligned. Be sure to align the Print Head after you install it.
Printed Paper Curls or Has Ink Blots Стр. 336 из 396 стр. Advanced Guide > Troubleshooting > Print Results Not Satisfactory > Printed Paper Curls or Has Ink Blots Printed Paper Curls or Has Ink Blots Check 1: Did you confirm the paper and print quality settings? Print Results Not Satisfactory Check 2: If the intensity is set high, reduce the Intensity setting in the printer driver and try printing again.
Paper Is Smudged/Printed Surface Is Scratched Стр. 337 из 396 стр. Advanced Guide > Troubleshooting > Print Results Not Satisfactory > Paper Is Smudged/Printed Surface Is Scratched Paper Is Smudged/Printed Surface Is Scratched Check 1: Did you confirm the paper and print quality settings? Print Results Not Satisfactory Check 2: Is the appropriate type of paper being used? Check the following: Check to see if the paper you are printing on is suitable for your printing purpose.
Paper Is Smudged/Printed Surface Is Scratched Стр. 338 из 396 стр. We recommend printing curl-corrected paper one sheet at a time. Note Depending on the media type, the paper may be smudged or may not be fed properly even if it is not curled. In such cases, follow the procedure described above to curl the paper before printing. This may improve the print result. Check 4: If you are printing on thick paper, select the Prevent paper abrasion setting.
Paper Is Smudged/Printed Surface Is Scratched Стр. 339 из 396 стр. the paper may become stained with ink. Resize your original document in your application software. Printing Area Check 7: Is the Paper Feed Roller dirty? Clean the Paper Feed Roller. Routine Maintenance Note Cleaning the Paper Feed Roller will wear the roller, so perform this procedure only when necessary.
Back of the Paper Is Smudged Стр. 340 из 396 стр. Advanced Guide > Troubleshooting > Print Results Not Satisfactory > Back of the Paper Is Smudged Back of the Paper Is Smudged Check 1: Did you confirm the paper and print quality settings? Print Results Not Satisfactory Check 2: Perform the Bottom Plate Cleaning to clean the inside of the printer. Cleaning Inside the Printer Note When performing duplex printing or too much printing, the inside may become stained with ink.
Vertical Lines Are Printed on the Sides of the Printout Стр. 341 из 396 стр.
Colors Are Uneven or Streaked Стр. 342 из 396 стр. Advanced Guide > Troubleshooting > Print Results Not Satisfactory > Colors Are Uneven or Streaked Colors Are Uneven or Streaked Check 1: Did you confirm the paper and print quality settings? Print Results Not Satisfactory Check 2: Print the Nozzle Check Pattern and perform any necessary maintenance operations such as Print Head Cleaning. Print the Nozzle Check Pattern to determine whether the ink ejects properly from the print head nozzles.
Colors Are Uneven or Streaked Стр. 343 из 396 стр. Alignment manually referring to Manual Print Head Alignment .
Printing Does Not Start Стр. 344 из 396 стр. Advanced Guide > Troubleshooting > Printing Does Not Start Printing Does Not Start Check 1: Make sure that the power plug is securely plugged in, then turn the printer on. While the Power lamp is flashing green, the printer is initializing. Wait until the Power lamp stops flashing and remains lit green. Note When printing large data such as a photo or graphics, it may take longer to start printing.
Printing Does Not Start Стр. 345 из 396 стр. Check 9: Configure the printer port appropriately. Configure "USBnnn" (where "n" is a number) as the printer port. 1. Log on as a user account with administrator privilege. 2. Click Control Panel, then Printer under Hardware and Sound. In Windows XP, click Control Panel, Printers and Other Hardware, then Printers and Faxes. In Windows 2000, click Control Panel then Printers. 3. Right-click the Canon XXX icon, then select Properties. 4.
Printing Stops Before It Is Completed Стр. 346 из 396 стр. Advanced Guide > Troubleshooting > Printing Stops Before It Is Completed Printing Stops Before It Is Completed Check 1: Is the Inner Cover opened while printing on paper? Close the Inner Cover and press the RESUME/CANCEL button on the printer. A page of print data being sent at the time of the error will be erased, so print that page again.
Printer Moves But Ink Is Not Ejected Стр. 347 из 396 стр. Advanced Guide > Troubleshooting > Printer Moves But Ink Is Not Ejected Printer Moves But Ink Is Not Ejected Check 1: Are the Print Head nozzles clogged? Print the Nozzle Check Pattern to determine whether the ink ejects properly from the print head nozzles. Refer to Routine Maintenance for the Nozzle Check Pattern printing, Print Head Cleaning, and Print Head Deep Cleaning.
Printing Speed Not as Fast as Expected Стр. 348 из 396 стр. Advanced Guide > Troubleshooting > Printing Speed Not as Fast as Expected Printing Speed Not as Fast as Expected Check 1: Is printing performed in Quiet Mode? Print speed is reduced if you specified to print in Quiet Mode in the printer driver. For faster printing, do not print in Quiet Mode. Reducing the Printer Noise Check 2: Is the print quality set too high? Increase the printing speed setting in the printer driver.
Print Head Holder Does Not Move to the Position for Replacing Стр. 349 из 396 стр. Advanced Guide > Troubleshooting > Print Head Holder Does Not Move to the Position for Replacing Print Head Holder Does Not Move to the Position for Replacing Check 1: Is the Power lamp off? Check if the Power lamp is lit green. The Print Head Holder will not move unless the power is on. If the Power lamp is off, close the Top Cover and turn the printer on.
Paper Does Not Feed Properly Стр. 350 из 396 стр. Advanced Guide > Troubleshooting > Paper Does Not Feed Properly Paper Does Not Feed Properly Check 1: Make sure of the following when you load paper. When loading two or more sheets of paper, align the edges of the sheets before loading. When loading two or more sheets of paper, make sure that the paper stack does not exceed the paper support load limit.
Paper Does Not Feed Properly Стр. 351 из 396 стр. Check 9: Is the Rear Cover closed completely? Paper may be jammed if the Rear Cover is not closed completely. Push the Rear Cover until it is closed completely. Refer to Overview of the Printer for the position of the Rear Cover.
Paper Does Not Feed from the Paper Source Specified in the Printer Driver Стр. 352 из 396 стр.
Paper Jams Стр. 353 из 396 стр. Advanced Guide > Troubleshooting > Paper Jams Paper Jams Note If you need to turn off the printer to remove jammed paper during printing, press the RESUME/CANCEL button to cancel print jobs before turning off the printer. If the paper is jammed in the Paper Output Slot or the Rear Tray: Remove the paper following the procedure below. 1. Slowly pull the paper out, either from the Rear Tray or from the Paper Output Slot, whichever is easier.
Paper Jams Стр. 354 из 396 стр. 2. Pull the paper out slowly. Note Be careful not to touch the components inside the printer. If you cannot pull the paper out, turn the printer off and turn it back on. The paper may be ejected automatically. 3. Attach the Rear Cover. Push the left side of the Rear Cover until it is closed completely. If you were not able to remove the paper out in step 2: 4. Remove the Cassette. 5. Pull the paper out slowly. 6.
Paper Jams Стр. 355 из 396 стр. When reloading the paper into the printer, confirm that you are using the correct paper and are loading it into the printer correctly. Loading Paper 7. Insert the Cassette into the printer again, and press the RESUME/CANCEL button on the printer. If you turned off the printer in step 2, all print jobs in queue are canceled. Reprint if necessary.
Paper Jams Стр. 356 из 396 стр. Make sure of the following: Check 1: Are there any foreign objects in the Rear Tray or around the Paper Output Slot? Check 2: Is the Rear Cover closed completely? Check 3: Is the paper curled? Check 3: Load the paper after correcting its curl.
Message Appears on the Computer Screen Advanced Guide > Troubleshooting > Message Appears on the Computer Screen Message Appears on the Computer Screen Service Error 5100 Is Displayed Error Regarding Automatic Duplex Printing Is Displayed Error Regarding Automatic Print Head Alignment Is Displayed Writing Error/Output Error/Communication Error Error Number: 300 Is Displayed Error Number: 1700 Is Displayed Ink Info Number: 1600 Is Displayed Ink Info Number: 1683 Is Displayed Ink Info Number: 1688 Is Disp
Message Appears on the Computer Screen driver. * In the following instructions, " XXX" signifies your printer's name. 1. Log on as a user account with administrator privilege. 2. Click Control Panel, then Printer under Hardware and Sound. In Windows XP, click Control Panel, Printers and Other Hardware, then Printers and Faxes. In Windows 2000, click Control Panel then Printers. 3. Right-click the Canon XXX icon, then select Properties. 4. Click the Ports tab to confirm the port settings.
Message Appears on the Computer Screen If you are using a relay device such as a USB hub, disconnect it, connect the printer directly to the computer, and try printing again. If printing starts normally, there is a problem with the relay device. Consult the reseller of the relay device for details. There could also be a problem with the USB cable. Replace the USB cable and try printing again. Check 3: Make sure that your printer's name is selected in the Print dialog box.
Message Appears on the Computer Screen Стр. 360 из 396 стр. See Eleven flashes: in Alarm Lamp Flashes Orange and take the appropriate action. Other Error Messages Check: If an error message is displayed outside the printer status monitor, check the following: "Could not spool successfully due to insufficient disk space" Delete any unnecessary files to increase the amount of free space on the disk.
Cannot Print Properly with Automatic Duplex Printing Стр. 361 из 396 стр. Advanced Guide > Troubleshooting > Cannot Print Properly with Automatic Duplex Printing Cannot Print Properly with Automatic Duplex Printing Check: Is the paper size or media type appropriate? Make sure that the actual size of the paper is suitable for automatic duplex printing. The sizes of media suitable for automatic duplex printing are A4, Letter, A5, and 5" x 7".
For Windows Users Advanced Guide > Troubleshooting > For Windows Users For Windows Users Printer Status Monitor Is Not Displayed Check: Is the printer status monitor enabled? Make sure that Enable Status Monitor is selected on the Option menu of the printer status monitor. 1. Open the printer properties dialog box. Opening the Printer Properties Dialog Box (Windows) 2. On the Maintenance sheet, click View Printer Status. 3. Select Enable Status Monitor on the Option menu if it is not selected.
For Windows Users Стр. 363 из 396 стр. To uninstall the Inkjet Printer/Scanner Extended Survey Program, click Details, then click Uninstall on the detail description screen. Once the program has been uninstalled, neither the survey nor the transmission of the printer usage information will be performed.
Error Message Appears on a PictBridge Compliant Device Стр. 364 из 396 стр. Advanced Guide > Troubleshooting > Error Message Appears on a PictBridge Compliant Device Error Message Appears on a PictBridge Compliant Device The following are the possible errors that may occur when printing directly from a PictBridge compliant device and the countermeasures to clear them. Note This section describes errors that are indicated on Canon-brand PictBridge compliant devices.
Error Message Appears on a PictBridge Compliant Device Стр. 365 из 396 стр. PictBridge compliant device, turn off the printer, and unplug the power cord of the printer from the power supply. Plug the power cord of the printer back in, turn on the printer, and then reconnect the PictBridge compliant device to the printer. If the same error occurs, contact your Canon service representative.
FAQs Стр. 366 из 396 стр.
If You Cannot Resolve the Problem Стр. 367 из 396 стр. Advanced Guide > Troubleshooting > If You Cannot Resolve the Problem If You Cannot Resolve the Problem If you cannot resolve the problem with any of the workarounds in this chapter, please contact the seller of the printer or a Canon service representative. Canon support staff are trained to be able to provide technical support to satisfy customers. Caution If the printer emits any unusual sound, smoke, or odor, turn it off immediately.
Instructions for Use (Printer Driver) Стр. 368 из 396 стр. Advanced Guide > Troubleshooting > Instructions for Use (Printer Driver) Instructions for Use (Printer Driver) This printer driver is subject to the following restrictions. Keep the following points in mind when using the printer driver. Restrictions on the Printer Driver Depending on the document type to be printed, the paper feed method specified in the printer driver may not operate correctly.
Instructions for Use (Printer Driver) Стр. 369 из 396 стр. Illustrator/Adobe Systems Inc. If Bitmap Printing takes effect, printing may take time or some data may not be printed. Print after clearing the Bitmap Printing check box in the Print dialog box.
Appendix Стр. 370 из 396 стр.
Printing Area Стр. 371 из 396 стр. Advanced Guide > Appendix > Printing Area Printing Area To ensure the best print quality, the printer allows a margin along each edge of media. The actual printable area will be the area inside these margins. Recommended printing area Printable area : Canon recommends that you print within this area. : The area where it is possible to print. However, printing in this area can affect the print quality or the paper feed precision.
Other Sizes than Letter, Legal, Envelopes Стр. 372 из 396 стр. Advanced Guide > Appendix > Printing Area > Other Sizes than Letter, Legal, Envelopes Other Sizes than Letter, Legal, Envelopes Size Printable Area (width x height) A5 5.56 x 7.95 inches / 141.2 x 202.0 mm A4 8.00 x 11.38 inches / 203.2 x 289.0 mm B5 6.90 x 9.80 inches / 175.2 x 249.0 mm 4" x 6" / 10 x 15 cm 3.73 x 5.69 inches / 94.8 x 144.4 mm 4" x 8" / 10 x 20 cm 3.73 x 7.69 inches / 94.8 x 195.2 mm 5" x 7" / 13 x 18 cm 4.
Letter, Legal Стр. 373 из 396 стр. Advanced Guide > Appendix > Printing Area > Letter, Legal Letter, Legal Size Printable Area (width x height) Letter 8.00 x 10.69 inches / 203.2 x 271.4 mm Legal 8.00 x 13.69 inches / 203.2 x 347.
Envelopes Стр. 374 из 396 стр. Advanced Guide > Appendix > Printing Area > Envelopes Envelopes Size Recommended Printing Area (width x height) European DL* 4.06 x 7.50 inches / 103.2 x 190.5 mm US Comm. Env. #10* 3.86 x 8.34 inches / 98.0 x 211.
Deleting the Undesired Print Job Стр. 375 из 396 стр. Advanced Guide > Appendix > Deleting the Undesired Print Job Deleting the Undesired Print Job If the printer does not start printing, the print job data cancelled or failed may be remaining. Delete the undesired print job by using the Canon IJ Status Monitor. 1. Display the Canon IJ Status Monitor Click the Status Monitor button displayed on the Task Bar. The Canon IJ Status Monitor appears. 2. Display the print jobs Click Display Print Queue....
Updating the Printer Driver Стр. 376 из 396 стр.
Obtaining the Latest Printer Driver Стр. 377 из 396 стр. Advanced Guide > Appendix > Updating the Printer Driver > Obtaining the Latest Printer Driver Obtaining the Latest Printer Driver By updating the printer driver to the latest version of the printer driver, unresolved problems may be solved. You can check the version of the printer driver by clicking the About... button on the Maintenance tab. Access our web site through the Internet and download the latest printer driver for your model.
Uninstalling the Printer Driver Стр. 378 из 396 стр. Advanced Guide > Appendix > Updating the Printer Driver > Uninstalling the Printer Driver Uninstalling the Printer Driver The printer driver you no longer use can be deleted. When deleting the printer driver, first exit all programs that are running. The procedure to delete the unnecessary printer driver is as follows: If there is an uninstaller 1.
Uninstalling the Printer Driver Стр. 379 из 396 стр. The deletion of the printer driver is complete. Important You may not be able to delete the printer driver properly from the Installed printer drivers list. If this happens, restart your computer, and try again.
Before Installing the Printer Driver Стр. 380 из 396 стр. Advanced Guide > Appendix > Updating the Printer Driver > Before Installing the Printer Driver Before Installing the Printer Driver This section describes the items that you should check before installing the Printer Driver. You should also refer to this section if the Printer Driver cannot be installed. Check the printer status Properly connect the personal computer and the printer.
Installing the Printer Driver Стр. 381 из 396 стр. Advanced Guide > Appendix > Updating the Printer Driver > Installing the Printer Driver Installing the Printer Driver You can access our web site through the Internet and download the latest Printer Driver for your model. The procedure for installing the downloaded Printer Driver is as follows: 1.
Uninstalling the On-Screen Manuals Стр. 382 из 396 стр. Advanced Guide > Appendix > Uninstalling the On-Screen Manuals Uninstalling the On-Screen Manuals Follow the procedure below to uninstall all of the installed on-screen manuals from your computer. All of the installed on-screen manuals will be deleted at the same time. 1. Click Start > All Programs (Programs in Windows 2000) > Canon XXX Manual (where "XXX" is your printer's name) > Uninstall. 2. Click OK when the confirmation message appears.
Transporting the Printer Стр. 383 из 396 стр. Advanced Guide > Appendix > Transporting the Printer Transporting the Printer When relocating the printer, pack the printer using the original packing materials. If you do not have the original packing materials, pack the printer carefully using protective material and place it inside a sturdy box. Caution Do not transport or store the printer slanted, vertically, or upside-down, as the ink may leak and damage the printer. 1. Turn the printer off. 2.
Opening the Printer Properties Dialog Box (Windows) Стр. 384 из 396 стр. Advanced Guide > Appendix > Opening the Printer Properties Dialog Box (Windows) Opening the Printer Properties Dialog Box (Windows) The printer driver setup window can be displayed through the application software in use or the Start menu of the Windows. Open the Printer Properties Dialog Box through the Application Software Follow the procedure below to configure print settings when printing. 1.
Opening the Page Setup and Print Dialog Box (Macintosh) Стр. 385 из 396 стр. Advanced Guide > Appendix > Opening the Page Setup and Print Dialog Box (Macintosh) Opening the Page Setup and Print Dialog Box (Macintosh) You can open the Page Setup dialog box and the Print dialog box from the application program you are using. Opening the Page Setup Dialog Box Open the Page Setup dialog box to specify page (paper) settings before printing. 1. Select Page Setup...
Opening the Canon IJ Printer Utility (Macintosh) Advanced Guide > Appendix > Opening the Canon IJ Printer Utility (Macintosh) Opening the Canon IJ Printer Utility (Macintosh) To open the Canon IJ Printer Utility, follow the procedure below. In Mac OS X v.10.5.x 1. Select System Preferences on the Apple menu. 2. Click Print & Fax. 3. Select your printer's name in the Printers and click Open Print Queue.... The job list of your printer is displayed. 4. Click Utility. The Printer List opens. 5.
Opening the Canon IJ Printer Utility (Macintosh) 1. Select Applications on the Go menu. 2. Double-click the Utilities folder, and then double-click the Printer Setup Utility icon. Стр. 387 из 396 стр. The Printer List opens. 3. Select your printer's name in the Name list and click Utility. 4. Select your printer's name in the Product list and click Maintenance. The Canon IJ Printer Utility starts up.
Connecting the Printer to the Network Стр. 388 из 396 стр. Advanced Guide > Appendix > Connecting the Printer to the Network Connecting the Printer to the Network If multiple computers are being used in the network environment, you can share the printer connected to one computer with other computers. The Windows versions of the computers connected to the network do not necessarily have to be the same.
Settings on Print Server Стр. 389 из 396 стр. Advanced Guide > Appendix > Connecting the Printer to the Network > Settings on Print Server Settings on Print Server To use a printer in a network, set printer sharing on the print server system. The procedure for setting up the print server systems is as follows: 1. Install the printer driver on the print server system For installation instructions, see the user's manual. 2.
Settings on Client PC Стр. 390 из 396 стр. Advanced Guide > Appendix > Connecting the Printer to the Network > Settings on Client PC Settings on Client PC After setting up the print server system, set up the client system. The procedure for setting up the client systems is as follows: In Windows Vista 1. Install the printer driver on the client systems Select Custom Install for the installation method.
Settings on Client PC Стр. 391 из 396 стр. Select A network printer, or a printer attached to another computer (Windows XP) or Network printer (Windows 2000), then click Next. On the Specify a Printer window (Windows XP) or Locate Your Printer window (Windows 2000), click Next and then search for the print server system. Click the icon for the printer that you have configured on the print server system to be shared, and then click Next.
Restrictions on Network Printing Стр. 392 из 396 стр. Advanced Guide > Appendix > Connecting the Printer to the Network > Restrictions on Network Printing Restrictions on Network Printing These are restrictions that apply if you are using a printer in a network environment. Check the restrictions for the environment you are using. If you are sharing a printer in a network A print completion message may be displayed. To disable the message display, follow the procedure below.
Using Easy-PhotoPrint EX Стр. 393 из 396 стр. Advanced Guide > Using Easy-PhotoPrint EX Using Easy-PhotoPrint EX --- Transforming Your Photos into Creative Works of Art --Easy-PhotoPrint EX allows you to create albums, calendars and stickers easily using photos taken with digital cameras. You can also print borderless photos easily. Start Easy-PhotoPrint EX Click Here: Easy-PhotoPrint EX Note See the section below for details on how to use Easy-PhotoPrint EX.
Using Easy-PhotoPrint EX Стр. 394 из 396 стр. CHECK! Select Album to add text and frames. You cannot decorate photos with Photo Print. Create a Calendar Using Your Favorite Photos Create calendars easily with Easy-PhotoPrint EX. Create your own calendar using your favorite photos! It'll be exciting to turn the calendar pages. You can use all kinds of photos. You can also create 2-month, 6-month and 12-month calendars.
About Solution Menu Стр. 395 из 396 стр. Advanced Guide > About Solution Menu About Solution Menu Quick Shortcut!! Solution Menu Solution Menu is a menu window that provides quick access from your desktop to Canon applications, manuals, and online product information. Important The number and types of buttons displayed in the window may vary depending on your printer and region. Starting Solution Menu Click Here: Solution Menu To start from desktop, see below.
About Solution Menu Стр. 396 из 396 стр. Starting an Application 1. Point to a button on the window to display the description of each application. 2. By clicking each button, the introduced application starts. Follow the same steps to view the manuals or online product information. Important Internet connection is required to access the online information. Internet connection fees apply. Exiting Solution Menu Click (Close) on the title bar.