MG2500 series Online Manual Printing Copying English
Contents Printing. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Printing from a Computer. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Printing with Application Software that You are Using (Printer Driver). . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Printing with Easy Setup. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Canon IJ Printer Driver. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 89 How to Open the Printer Driver Setup Window. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90 Canon IJ Status Monitor. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92 Checking the Ink Status from Your Computer. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Printing Printing from a Computer Printing with Application Software that You are Using (Printer Driver) 4
Printing from a Computer Printing with Application Software that You are Using (Printer Driver) 5
Printing with Application Software that You are Using (Printer Driver) Printing with Easy Setup Basic Various Printing Methods Changing the Print Quality and Correcting Image Data Overview of the Printer Driver Printer Driver Description Updating the MP Drivers Sharing the Printer on a Network 6
Printing with Easy Setup This section describes the simple procedure for setting the Quick Setup tab so that you can carry out appropriate printing on this machine. 1. Check that the machine is turned on 2. Load paper on the machine 3. Open the printer driver setup window 4. Select a frequently used profile In Commonly Used Settings on the Quick Setup tab, select a printing profile suited for the purpose.
Important The print quality settings that can be selected may differ depending on a printing profile. 6. Complete the setup Click OK. When you execute print, the document is printed with settings that match your purpose.
Important When you select the Always Print with Current Settings check box, all settings specified on the Quick Setup, Main, and Page Setup tabs are saved, and you can print with the same settings from the next time as well. In the Commonly Used Settings window, click Save... to register the specified settings.
Setting the Media Type with the Printer Driver When you use this machine, selecting a media type that matches the print purpose will help you achieve the best print results. You can use the following media types on this machine. Commercially available papers Media name Media Type in the printer driver Plain Paper (including recycled paper) Plain Paper Envelopes Envelope Canon genuine papers (Photo Printing) Media name
Various Printing Methods Setting a Page Size and Orientation Setting the Number of Copies and Printing Order Setting the Stapling Margin Fit-to-Page Printing Scaled Printing Page Layout Printing Tiling/Poster Printing Booklet Printing Duplex Printing Stamp/Background Printing Registering a Stamp Registering Image Data to be Used as a Background Setting Up Envelope Printing Displaying the Print Results before Printing Setting Paper Dimensions (Custom Size) Editing the Print Document or Reprinting from the Pr
Setting a Page Size and Orientation The paper size and orientation are essentially determined by the application software. When the page size and orientation set for Page Size and Orientation on the Page Setup tab are same as those set with the application software, you do not need to select them on the Page Setup tab.
Note If Normal-size is selected for Page Layout, then Automatically reduce large document that the printer cannot output is displayed. Normally, you can leave the Automatically reduce large document that the printer cannot output check box checked. During printing, if you do not want to reduce large documents that cannot be printed on the printer, uncheck the check box.
Setting the Number of Copies and Printing Order The procedure for specifying the number of copies and printing order is as follows: You can also set the number of copies on the Quick Setup tab. 1. Open the printer driver setup window 2. Specify the number of copies to be printed For Copies on the Page Setup tab, specify the number of copies to be printed. 3.
• Print from Last Page: /Collate: • Print from Last Page: /Collate: 4. Complete the setup Click OK. When you execute print, the specified number of copies will be printed with the specified printing order. Important When the application software that you used to create the document has the same function, specify the settings on the printer driver. However, if the print results are not acceptable, specify the function settings on the application software.
These settings can be used in combination with Normal-size, Fit-to-Page, Scaled, Page Layout, and Duplex Printing (Manual).
Setting the Stapling Margin The procedure for setting the staple side and the margin width is as follows: 1. Open the printer driver setup window 2. Specify the side to be stapled Check the position of the stapling margin from Stapling Side on the Page Setup tab. The printer analyzes the Orientation and Page Layout settings, and automatically selects the best staple position. When you want to change the setting, select from the list. 3. Set the margin width If necessary, click Specify Margin...
Note The printer automatically reduces the print area depending on the staple position margin. 4. Complete the setup Click OK on the Page Setup tab. When you execute print, the data is printed with the specified staple side and margin width. Important Stapling Side and Specify Margin... appear grayed out and are unavailable when: • Tiling/Poster or Booklet is selected for Page Layout • Scaled is selected for Page Layout (When Duplex Printing (Manual) is also selected, only Stapling Side can be specified.
Fit-to-Page Printing The procedure for printing a document that is automatically enlarged or reduced to fit the page size to be used is as follows: 1. Open the printer driver setup window 2. Set fit-to-page printing Select Fit-to-Page from the Page Layout list on the Page Setup tab. 3. Select the paper size of the document Using Page Size, select the page size that is set with your application software. 4.
reduced. When the Printer Paper Size is larger than the Page Size, the page image will be enlarged. The current settings are displayed in the settings preview on the left side of the printer driver. 5. Complete the setup Click OK. When you execute print, the document will be enlarged or reduced to fit to the page size.
Scaled Printing The procedure for printing a document with pages enlarged or reduced is as follows: 1. Open the printer driver setup window 2. Set scaled printing Select Scaled from the Page Layout list on the Page Setup tab. 3. Select the paper size of the document Using Page Size, select the page size that is set with your application software. 4.
When the printer paper size is smaller than the Page Size, the page image will be reduced. When the printer paper size is larger than the Page Size, the page image will be enlarged. • Specify a scaling factor Directly type in a value into the Scaling box. The current settings are displayed in the settings preview on the left side of the printer driver. 5.
Click OK. When you execute print, the document will be printed with the specified scale. Important When the application software which you used to create the original has the scaled printing function, configure the settings on your application software. You do not need to configure the same setting in the printer driver. Note Selecting Scaled changes the printable area of the document.
Page Layout Printing The page layout printing function allows you to print more than one page image on a single sheet of paper. The procedure for performing page layout printing is as follows: 1. Open the printer driver setup window 2. Set page layout printing Select Page Layout from the Page Layout list on the Page Setup tab. The current settings are displayed in the settings preview on the left side of the printer driver. 3.
If necessary, click Specify..., specify the following settings in the Page Layout Printing dialog box, and click OK. Pages To change the number of pages to be printed on a single sheet of paper, select the number of pages from the list. Page Order To change the page arrangement order, select a placement method from the list. Page Border To print a page border around each document page, check this check box. 5. Complete the setup Click OK on the Page Setup tab.
Tiling/Poster Printing The tiling/poster printing function allows you to enlarge image data, divide it into several pages, and print these pages on separate sheets of paper. You can also paste the pages together to create a large print like a poster. The procedure for performing tiling/poster printing is as follows: Setting Tiling/Poster Printing 1. Open the printer driver setup window 2. Set tiling/poster printing Select Tiling/Poster from the Page Layout list on the Page Setup tab.
Select the size of the paper loaded in the machine from the Printer Paper Size list. This completes the setup for dividing the document into 2 and performing tiling/poster printing. 4. Set the number of image divisions and the pages to be printed If necessary, click Specify..., specify the following settings in the Tiling/Poster Printing dialog box, and then click OK. Image Divisions Select the number of divisions (vertical x horizontal).
5. Complete the setup Click OK on the Page Setup tab. When you execute print, the document will be divided into several pages during printing. Printing Only Specific Pages If ink becomes faint or runs out during printing, you can reprint only the specific pages by following the procedure below: 1. Set the print range In the settings preview on the left of the Page Setup tab, click the pages that do not need to be printed.
Important Since tiling/poster printing enlarges the document when printing it, the print results may become coarse.
Booklet Printing The booklet printing function allows you to print data for a booklet. Data is printed on both sides of the paper. This type of printing ensures that pages can be collated properly, in page number order, when the printed sheets are folded and stapled at the center. The procedure for performing booklet printing is as follows: 1. Open the printer driver setup window 2. Set booklet printing Select Booklet from the Page Layout list on the Page Setup tab.
Click Specify... and specify the following settings in the Booklet Printing dialog box, and then click OK. Margin for stapling Select which side should the stapling margin be on when the booklet is completed. Insert blank page To leave one side of a sheet blank, check the check box, and select the page to be left blank. Margin Enter the margin width. The specified width from the center of the sheet becomes the margin width for one page.
Duplex Printing The procedure for printing data on both sides of a sheet of paper is as follows: You can also set duplex printing in Additional Features on the Quick Setup tab. 1. Open the printer driver setup window 2. Set duplex printing Check the Duplex Printing (Manual) check box on the Page Setup tab. 3. Select the layout Select Normal-size, Fit-to-Page, Scaled, or Page Layout from the Page Layout list. 4.
If necessary, click Specify Margin... and set the margin width, and then click OK. 6. Complete the setup Click OK on the Page Setup tab. When you execute print, the document is first printed on one side of a sheet of paper. After one side is printed, reload the paper correctly according to the message. Then click Start Printing to print the opposite side.
Stamp/Background Printing Stamp or Background may be unavailable when certain printer drivers or operating environments are used. The Stamp function allows you to print a stamp text or a bitmap over or behind document data. It also allows you to print date, time and user name. The Background function allows you to print a light illustration behind the document data.
Note With the XPS printer driver, the Stamp/Background... button has become the Stamp... button and only the stamp function can be used. 3. Select a stamp Check the Stamp check box, and select the stamp to be used from the list. The current settings are displayed in the settings preview on the left side of the Page Setup tab. 4. Set the stamp details If necessary, specify the following settings, and then click OK. Define Stamp... button To change the stamp text, bitmap, or position, click this.
5. Complete the setup Click OK on the Page Setup tab. When you execute print, the data is printed with the specified stamp. Printing a Background Two bitmap files are pre-registered as samples. 1. Open the printer driver setup window 2. Click Stamp/Background... on the Page Setup tab The Stamp/Background dialog box opens. 3. Select the background Check the Background check box, and select the background to be used from the list.
Registering a Stamp This feature may be unavailable when certain printer drivers or operating environments are used. You can create and register a new stamp. You can also change and re-register some of the settings of an existing stamp. Unnecessary stamps can be deleted at any time. The procedure for registering a new stamp is as follows: Registering a New Stamp 1. Open the printer driver setup window 2. Click Stamp/Background... (Stamp...
Note With the XPS printer driver, the Stamp/Background... button has become the Stamp... button and only the stamp function can be used. 3. Click Define Stamp... The Stamp Settings dialog box opens. 4. Configure the stamp while viewing the preview window • Stamp tab Select Text, Bitmap, or Date/Time/User Name that matches your purpose for Stamp Type. • For Text registration, the characters must already be entered in Stamp Text. If necessary, change the TrueType Font, Style, Size, and Outline settings.
Important Stamp Text appears grayed out and is unavailable when Date/Time/User Name is selected. • Placement tab Select the stamp position from the Position list. You can also select Custom from the Position list and specify coordinates for X-Position and Y-Position. You can also change the stamp position by dragging the stamp in the preview window. To change the stamp position angle, type a value in the Orientation box directly.
Click Save overwrite on the Save settings tab. When you want to save the stamp with a different title, type a new title in the Title box and click Save. Click OK when the confirmation message appears. 5. Complete the setup Click OK. The Stamp/Background (Stamp) dialog box opens again. The registered title appears in the Stamp list. Deleting an Unnecessary Stamp 1. Click Define Stamp... in the Stamp/Background (Stamp) dialog box The Stamp Settings dialog box opens. 2.
Registering Image Data to be Used as a Background This feature may be unavailable when certain printer drivers or operating environments are used. You can select a bitmap file (.bmp) and register it as a new background. You can also change and register some of the settings of an existing background. An unnecessary background can be deleted. The procedure for registering image data to be used as a background is as follows: Registering New Background 1. Open the printer driver setup window 2.
Note With the XPS printer driver, the Stamp/Background... button has become the Stamp... button and Background cannot be used. 3. Click Select Background... The Background Settings dialog box opens. 4. Select the image data to be registered to the background Click Select File.... Select the target bitmap file (.bmp), and then click Open. 5. Specify the following settings while viewing the preview window Layout Method Select how the background image data is to be placed.
Note Spaces, tabs, and returns cannot be entered at the beginning or end of a title. 7. Complete the setup Click OK, then it returns to Stamp/Background dialog box. The registered title appears in the Background list. Changing and Registering Some Background Settings 1. Select the background for which the settings are to be changed Select the Background check box in the Stamp/Background dialog box. Then from the list, select the title of the background you want to change. 2. Click Select Background...
3. Complete the setup Click OK, then it returns to Stamp/Background dialog box.
Setting Up Envelope Printing If you are using the XPS printer driver, replace "Canon IJ Status Monitor" with "Canon IJ XPS Status Monitor" when reading this information. The procedure for performing envelope printing is as follows: 1. Load envelope on the machine 2. Open the printer driver setup window 3. Select the media type Select Envelope from Commonly Used Settings on the Quick Setup tab. 4.
Select High or Standard that matches your purpose for Print Quality. 7. Complete the setup Click OK. When you execute print, the information is printed on the envelope.
Displaying the Print Results before Printing If you are using the XPS printer driver, replace "Canon IJ Preview" with "Canon IJ XPS Preview" when reading this information. You can display and check the print result before printing. The procedure for displaying the print result before printing is as follows: You can also set the print results display on the Quick Setup tab. 1. Open the printer driver setup window 2. Set the preview Check the Preview before printing check box on the Main tab. 3.
Setting Paper Dimensions (Custom Size) You can specify the height and width of paper when its size cannot be selected from the Page Size. Such a paper size is called "custom size." The procedure for specifying a custom size is as follows: You can also set a custom size in Printer Paper Size on the Quick Setup tab. 1. Set the custom size in the application software Specify the custom size in the paper size setting of your application software.
4. Set the custom paper size Specify Units, and enter the Width and Height of the paper to be used. Then click OK. 5. Complete the setup Click OK on the Page Setup tab. When you execute print, the data is printed with the specified paper size.
Editing the Print Document or Reprinting from the Print History This function is unavailable when the standard IJ printer driver is used. In the Canon IJ XPS preview window, you can edit the print document or retrieve the document print history to print the document.
Editing and Printing a Print Document When printing multiple documents or pages, you can combine documents, change the print sequence of the documents or pages, or delete documents or pages. 1. Open the printer driver setup window 2. Set the preview Check the Preview before printing check box on the Main tab. 3. Complete the setup Click OK. The Canon IJ XPS Preview will start and the print result will be displayed before printing. 4.
select Move Page from Pages, and select the appropriate item. You can also click and drag a print page to change the print sequence. • Deleting print documents and print pages • To delete a print document, select the target document from the Document Name list, and on the Edit menu, choose Documents and then Delete Document. • To delete a print page, click View Thumbnails from the Option menu, and select the print page to be deleted. Next, on the Edit menu, select Delete Page from Pages.
Click Print. When you execute print, the printer uses the specified settings to print the data. Reprinting from the Print History When you click Save Print History on the File menu to enable the setting, the document printed from the preview is saved, and you can reprint the document with the same settings. 1. Displaying the print history Open the printer driver setup window. Then on the Maintenance tab, select View Print History. The saved print document is displayed in the preview.
Changing the Print Quality and Correcting Image Data Setting the Print Quality Level (Custom) Printing a Color Document in Monochrome Specifying Color Correction Optimal Photo Printing of Image Data Adjusting Colors with the Printer Driver Printing with ICC Profiles Adjusting Color Balance Adjusting Color Balance Using Sample Patterns (Printer Driver) Adjusting Brightness Adjusting Intensity Adjusting Contrast Adjusting Intensity/Contrast Using Sample Patterns (Printer Driver) 54
Setting the Print Quality Level (Custom) The print quality level can be set in the Custom. The procedure for setting the print quality level is as follows: 1. Open the printer driver setup window 2. Select the print quality On the Main tab, select Custom for Print Quality, and click Set.... The Custom dialog box opens. 3. Setting the print quality level Drag the slider bar to select the print quality level and click OK. 4. Complete the setup Click OK on the Main tab.
Important Certain print quality levels cannot be selected depending on the settings of Media Type.
Printing a Color Document in Monochrome The procedure for printing a color document in monochrome is as follows: You can also set a grayscale printing in Additional Features on the Quick Setup tab. 1. Open the printer driver setup window 2. Set grayscale printing Check the Grayscale Printing check box on the Main tab. 3. Complete the setup Click OK. When you execute print, the document is converted to grayscale data. It allows you to print the color document in monochrome.
When using the grayscale printing function to print Adobe RGB data, convert the data to sRGB data using an application software. Note During Grayscale Printing, color inks may be used as well as black ink.
Specifying Color Correction You can specify the color correction method suited to the type of document to be printed. Normally, the printer driver adjusts the colors by using Canon Digital Photo Color so that data is printed with color tints that most people prefer. This method is suitable for printing sRGB data. When you want to print by using the color space (Adobe RGB or sRGB) of the image data effectively, select ICM (ICC Profile Matching).
Driver Matching With Canon Digital Photo Color, you can print sRGB data with color tints that most people prefer. ICM (ICC Profile Matching) Adjusts the colors by using an ICC profile when printing. Specify the input profile to be used. None The printer driver does not perform color correction. Select this value when you are specifying an individually created printing ICC profile in an application software to print data. 4. Complete the setup Click OK on the Main tab.
Adjusting Colors with the Printer Driver Printing with ICC Profiles 61
Optimal Photo Printing of Image Data When people print images taken with digital cameras, they sometimes feel that the printed color tones differ from those of actual image or those displayed on the monitor. To get the print results as close as possible to the desired color tones, you must select a printing method that is best suited to the application software used or to your purpose. Color Management Devices such as digital cameras, scanners, monitors, and printers handle color differently.
Printing with ICC Profiles Describes the procedure for printing by using the color space of Adobe RGB or sRGB effectively. You can print with a common color space by setting up the application software and the printer driver so that the color management matches the input ICC profile of the image data. The method for setting up the printer driver differs depending on the application software to be used.
Adjusting Colors with the Printer Driver You can specify the color correction function of the printer driver to print sRGB data with color tints that most people prefer through the use of Canon Digital Photo Color. When printing from an application software that can identify ICC profiles and allows you to specify them, use a printing ICC profile in the application software, and select settings for color management. The procedure for adjusting colors with the printer driver is as follows: 1.
Click OK on the Main tab. When you execute print, the printer driver adjusts the colors when printing the data.
Printing with ICC Profiles When the image data has a specified input ICC profile, you can print by using the color space (Adobe RGB or sRGB) of the data effectively. The printer driver setting procedure varies depending on the application software used to print.
4. Set the other items If necessary, click Color Adjustment tab, and adjust the color balance (Cyan, Magenta, Yellow) and adjust Brightness, Intensity, and Contrast settings, and then click OK. 5. Complete the setup Click OK on the Main tab. When you execute print, the machine uses the color space of the image data.
4. Select the input profile Select an Input Profile that matches the color space of the image data. • For sRGB data or data without an input ICC profile: Select Standard. • For Adobe RGB data: Select Adobe RGB (1998). Important When the application software specifies an input profile, the input profile setting of the printer driver becomes invalid. When no input ICC profiles are installed on your computer, Adobe RGB (1998) will not be displayed. 5.
Related Topics Setting the Print Quality Level (Custom) Specifying Color Correction Adjusting Color Balance Adjusting Brightness Adjusting Intensity Adjusting Contrast 69
Adjusting Color Balance You can adjust the color tints when printing. Since this function adjusts color balance of the output by changing the ink ratios of each color, it changes the total color balance of the document. Use the application software when you want to change the color balance significantly. Use the printer driver only when you want to adjust the color balance slightly.
The Manual Color Adjustment dialog box opens. 3. Adjust color balance There are individual sliders for Cyan, Magenta, and Yellow. Each color becomes stronger when the corresponding slider is moved to the right, and becomes weaker when the corresponding slider is moved to the left. For example, when cyan becomes weaker, the color red becomes stronger. You can also directly enter a value linked to the slider. Enter a value in the range from -50 to 50.
Important Adjust the slider gradually. 4. Complete the setup Click OK on the Main tab. When you execute print, the document is printed with the adjusted color balance. Important When the Grayscale Printing check box on the Main tab is checked, the color balance (Cyan, Magenta, Yellow) appear grayed out and are unavailable.
Adjusting Color Balance Using Sample Patterns (Printer Driver) You can look at the print results of pattern print and adjust the color balance. When you change the color balance or intensity/contrast of a document, the pattern print function prints the adjustment results in a list, together with the adjustment values. Described below is the procedure for adjusting the color balance while looking at the pattern. 1. Open the printer driver setup window 2.
4. Setting pattern print When the Pattern Print dialog box opens, set the following items, and then click OK. Parameters to Adjust Select Cyan/Magenta/Yellow. Important When the Grayscale Printing check box on the Main tab is checked, Cyan/ Magenta/Yellow appear grayed out and are unavailable. Printer Paper Size Select the paper size to be used for pattern printing. Note Depending on the paper size selected on the Page Setup tab, there may be sizes that cannot be selected.
Note Largest and Large cannot be selected when certain paper sizes or output paper sizes are selected. Color Variation Between Instances Set the amount of color change between neighboring patterns. Note Large is about double the size of Medium, and Small is about half the size of Medium. 5. Checking the print results of pattern print On the Color Adjustment tab, select OK to close the Manual Color Adjustment dialog box. On the Main tab, select OK, and then execute printing.
Look at the print results and select the image that you like best. Then enter the color balance numbers indicated at the bottom of that image into the Cyan, Magenta, and Yellow fields on the Color Adjustment tab. Clear the Print a pattern for color adjustment check box, and click OK. Note You can also set color balance on the Quick Setup tab by choosing Photo Printing under Commonly Used Settings, and then choosing Color/Intensity Manual Adjustment under Additional Features. 7.
Related Topics Adjusting Color Balance Adjusting Intensity Adjusting Contrast Adjusting Intensity/Contrast Using Sample Patterns (Printer Driver) 77
Adjusting Brightness You can change the brightness of the overall image data during printing. This function does not change pure white or pure black but it changes the brightness of the intermediate colors. The following sample shows the print result when the brightness setting is changed.
Select Light, Normal, or Dark for Brightness, and click OK. The current settings are displayed in the settings preview on the left side of the printer driver. 4. Complete the setup Click OK on the Main tab. When you execute print, the data is printed at the specified brightness.
Adjusting Intensity You can dilute (brighten) or intensify (darken) the colors of the overall image data during printing. The following sample shows the case when the intensity is increased so that all colors become more intense when the image data is printed.
Moving the Intensity slider to the right intensifies (darkens) the colors, and moving the slider to the left dilutes (brightens) the colors. You can also directly enter a value linked to the slider. Enter a value in the range from -50 to 50. The current settings are displayed in the settings preview on the left side of the printer driver. After adjusting each color, click OK. Important Adjust the slider gradually. 4. Complete the setup Click OK on the Main tab.
Adjusting Contrast You can adjust the image contrast during printing. To make the differences between the light and dark portions of images greater and more distinct, increase the contrast. On the other hand, to make the differences between the light and dark portions of images smaller and less distinct, reduce the contrast.
Moving the Contrast slider to the right increases the contrast, and moving the slider to the left decreases the contrast. You can also directly enter a value linked to the slider. Enter a value in the range from -50 to 50. The current settings are displayed in the settings preview on the left side of the printer driver. After adjusting each color, click OK. Important Adjust the slider gradually. 4. Complete the setup Click OK on the Main tab.
Adjusting Intensity/Contrast Using Sample Patterns (Printer Driver) You can look at the print results of pattern print and adjust the intensity/contrast. When you change the color balance or intensity/contrast of a document, the pattern print function prints the adjustment results in a list, together with the adjustment values. Described below is the procedure for adjusting the intensity/contrast while looking at the pattern. 1. Open the printer driver setup window 2.
4. Setting pattern print When the Pattern Print dialog box opens, set the following items, and then click OK. Parameters to Adjust Select Intensity/Contrast. Printer Paper Size Select the paper size to be used for pattern printing. Note Depending on the paper size selected on the Page Setup tab, there may be sizes that cannot be selected. Amount of Pattern Instances Select Largest, Large, or Small to set the number of patterns to be printed.
Color Variation Between Instances Set the amount of color change between neighboring patterns. Note Large is about double the size of Medium, and Small is about half the size of Medium. 5. Checking the print results of pattern print On the Color Adjustment tab, select OK to close the Manual Color Adjustment dialog box. On the Main tab, select OK, and then execute printing. The machine then prints a pattern in which the intensity/contrast that you set is the center value. 6.
Note You can also set intensity/contrast on the Quick Setup tab by choosing Photo Printing under Commonly Used Settings, and then choosing Color/Intensity Manual Adjustment under Additional Features. 7. Complete the setup Click OK on the Main tab. Then when you execute printing, the document is printed with the intensity/contrast that was adjusted by the pattern print function.
Overview of the Printer Driver Canon IJ Printer Driver How to Open the Printer Driver Setup Window Canon IJ Status Monitor Checking the Ink Status from Your Computer Canon IJ Preview Deleting the Undesired Print Job Instructions for Use (Printer Driver) 88
Canon IJ Printer Driver The Canon IJ printer driver (called printer driver below) is a software that is installed on your computer for printing data with this machine. The printer driver converts the print data created by your application software into data that your printer can understand, and sends the converted data to the printer. Because different models support different print data formats, you need a printer driver for the specific model you are using.
How to Open the Printer Driver Setup Window You can display the printer driver setup window from the application software in use or from the printer icon. Open the Printer Driver Setup Window through the Application Software Follow the procedure below to configure printing profile when printing. 1. Select the command that you perform printing on the application software In general, select Print on the File menu to open the Print dialog box. 2.
Important Opening the printer driver setup window through Printer properties (Windows 8, Windows 7) or Properties (Windows Vista, Windows XP) displays such tabs regarding the Windows functions as the Ports (or Advanced) tab. Those tabs do not appear when opening through Printing preferences or application software. For tabs regarding Windows functions, refer to the user's manual for the Windows.
Canon IJ Status Monitor If you are using the XPS printer driver, replace "Canon IJ Status Monitor" with "Canon IJ XPS Status Monitor" when reading this information. The Canon IJ Status Monitor is an application software that shows the status of the machine and the progress of printing. You will know the status of the machine with graphics, icons, and messages. Launching the Canon IJ Status Monitor The Canon IJ Status Monitor launches automatically when print data is sent to the machine.
In such cases, take the appropriate action as described.
Checking the Ink Status from Your Computer If you are using the XPS printer driver, replace "Canon IJ Status Monitor" with "Canon IJ XPS Status Monitor" when reading this information. You can check the remaining ink level and the FINE cartridge types for your model. 1. Open the printer driver setup window 2. Launching the Canon IJ Status Monitor On the Maintenance tab, click View Printer Status. The Canon IJ Status Monitor opens and displays an image of the ink status.
Canon IJ Preview The Canon IJ Preview is an application software that displays what the print result will look like before a document is actually printed. The preview reflects the information that is set within the printer driver and allows you to check the document layout, print order, and number of pages. You can also change the media type settings. When you want to display a preview before printing, open the printer driver setup window, click the Main tab, and check the Preview before printing check box.
Deleting the Undesired Print Job If you are using the XPS printer driver, replace "Canon IJ Status Monitor" with "Canon IJ XPS Status Monitor" when reading this information. If the printer does not start printing, canceled or failed print job data may be remaining. Delete the undesired print job by using the Canon IJ Status Monitor. 1. Display the Canon IJ Status Monitor Click the button of the status monitor displayed on the task bar. The Canon IJ Status Monitor appears. 2.
Instructions for Use (Printer Driver) This printer driver is subject to the following restrictions. Keep the following points in mind when using the printer driver. Restrictions on the Printer Driver • With some applications, the Copies setting in the Page Setup tab of the printer driver may not be enabled. In this case, use the copies setting in the Print dialog box of the application software.
Note Disable ICM required from the application software cannot be used when the XPS printer driver is used. Points to Note About Applications with Restrictions • There are following restrictions in Microsoft Word (Microsoft Corporation). • When Microsoft Word has the same printing functions as the printer driver, use Word to specify them.
Printer Driver Description Quick Setup tab Description Main tab Description Page Setup tab Description Maintenance tab Description Canon IJ Preview Description Canon IJ XPS Preview Description Canon IJ Status Monitor Description 99
Quick Setup tab Description The Quick Setup tab is for registering commonly used print settings. When you select a registered setting, the machine automatically switches to the preset items. Commonly Used Settings The names and icons of frequently used printing profiles are registered. When you select a printing profile according to the purpose of the document, settings that match the purpose are applied.
Business Document Select this setting when printing a general document. If Page Size, Orientation, and Copies were set from the application software, those settings have priority. Paper Saving Select this setting to save paper when printing a general document. The 2-on-1 Printing and Duplex Printing (Manual) check boxes are checked automatically. If Page Size, Orientation, and Copies were set from the application software, those settings have priority.
Icon Select the icon for the printing profile you wish to save. The selected icon appears, with its name, in the Commonly Used Settings list on the Quick Setup tab. Save the paper size setting Saves the paper size to the printing profile in Commonly Used Settings. To apply the saved paper size when the printing profile is selected, check this check box. If this check box is unchecked, the paper size is not saved, and consequently the paper size setting is not applied when the printing profile is selected.
Settings Preview The paper illustration shows how the original will be laid out on a sheet of paper. You can check an overall image of the layout. Preview before printing Shows what the print result will look like before you actually print the data. Check this check box to display a preview before printing. Uncheck this check box if you do not want to display a preview. Important To use the Canon IJ XPS Preview, you must have Microsoft .NET Framework 4 Client Profile installed on your computer.
Draft This setting is appropriate for test printing. Rotate 180 degrees Prints the document by rotating it 180 degrees against the paper feed direction. The width of print area and the amount of extension that are configured in other application software will be reversed vertically and horizontally. Color/Intensity Manual Adjustment Select when you set the Color Correction method and individual settings such as Cyan, Magenta, Yellow, Brightness, Intensity, and Contrast, etc.
Orientation Selects the printing orientation. If the application used to create your document has a similar function, select the same orientation that you selected in that application. Portrait Prints the document so that its top and bottom positions are unchanged relative to the paper feed direction. This is the default setting. Landscape Prints the document by rotating it 90 degrees relative to the paper feed direction.
Important When the application software that you used to create the document has the same function, specify the settings on the printer driver. However, if the print results are not acceptable, specify the function settings on the application software. Always Print with Current Settings Prints documents with the current settings starting from the next print execution.
Main tab Description The Main tab allows you to create a basic print setup in accordance with the media type. Unless special printing is required, normal printing can be performed just by setting the items on this tab. Settings Preview The paper illustration shows how the original will be laid out on a sheet of paper. You can check an overall image of the layout. Media Type Selects a type of printing paper. Select a media type that matches the paper that is loaded in the machine.
Draft This setting is appropriate for test printing. Custom Select this when you want to set the printing quality level individually. Set... is enabled and you can open the Custom dialog box to specify custom settings. Set... Open the Custom dialog box. You can then individually set the print quality level. Select Custom for Print Quality to enable this button. Custom dialog box Set the quality level, and select the desired print quality. Quality You can use the slider bar to adjust the print quality level.
Note If you want to use an ICC profile to adjust colors, use the Manual Color Adjustment dialog box to set the profile. Color Adjustment Tab This tab allows you to adjust the color balance by changing the settings of the Cyan, Magenta, Yellow, Brightness, Intensity, and Contrast options. Preview Shows the effect of color adjustment. The color and brightness change when each item is adjusted.
Brightness Selects the brightness of your print. You cannot change the levels of pure white and black. However, the brightness of the colors between white and black can be changed. Intensity Adjusts the overall intensity of your print. Moving the slider to the right increases the intensity, and moving the slider to the left decreases the intensity. You can also directly enter a value linked to the slider. Enter a value in the range from -50 to 50.
Intensity/Contrast Prints a pattern that allows you to check the intensity/contrast balance. Important When Grayscale Printing is checked on the Main tab, Cyan/ Magenta/Yellow appear grayed out and are unavailable. Printer Paper Size Selects the paper size to be used for pattern printing. This setting is linked to Printer Paper Size on the Page Setup tab. Note Depending on the paper size selected on the Page Setup tab, there may be sizes that cannot be selected.
Note Large is about double the size of Medium, and Small is about half the size of Medium. Matching Tab Allows you to select the method for adjusting colors to match the type of document to be printed. Color Correction Allows you to select Driver Matching, ICM (ICC Profile Matching), or None to match the purpose of the print operation. Driver Matching With Canon Digital Photo Color, you can print sRGB data with color tints that most people prefer.
Note In the XPS printer driver, ICM has become ICC Profile Matching. Important If the application software is set so that ICM is disabled, ICM is unavailable for Color Correction and the printer may not be able to print the image data properly. When Grayscale Printing is checked on the Main tab, Color Correction appears grayed out and is unavailable. Grayscale Printing This function converts the data to monochrome data when printing your document.
Adjusting Intensity/Contrast Using Sample Patterns (Printer Driver) Specifying Color Correction Adjusting Colors with the Printer Driver Printing with ICC Profiles Printing a Color Document in Monochrome Displaying the Print Results before Printing 114
Page Setup tab Description The Page Setup tab allows you to determine how a document is to be arranged on the paper. Also, this tab allows you to set the number of copies and the order of printing. If the application which created the document has a similar function, set them with the application. Settings Preview The paper illustration shows how the original will be laid out on a sheet of paper. You can check an overall image of the layout. Page Size Selects a page size.
Orientation Selects the printing orientation. If the application used to create your document has a similar function, select the same orientation that you selected in that application. Portrait Prints the document so that its top and bottom positions are unchanged relative to the paper feed direction. This is the default setting. Landscape Prints the document by rotating it 90 degrees relative to the paper feed direction.
Check this check box to reduce the size when printing the document. Uncheck this check box to print the document with the original document size. Fit-to-Page This function enables you to automatically enlarge or reduce documents to fit to the paper size loaded in the printer without changing the paper size you specified in your application software. Scaled Documents can be enlarged or reduced to be printed. Specify the size in Printer Paper Size, or enter the scaling ratio in the Scaling box.
Page Border Prints a page border line around each document page. Check this check box to print the page border line. Uncheck this check box if you do not want to print the line. Tiling/Poster This function enables you to enlarge the image data and divide the enlarged data into several pages to be printed. You can also glue together these sheets of paper to create large printed matter, such as a poster. Click Specify...
Print "Cut/Paste" lines in margins Specifies whether to print cut lines that serve as guidelines for pasting together the pages into a poster. Check this check box to print the cut lines. Uncheck this check box if you do not want to print the lines. Print page range Specifies the printing range. Select All under normal circumstances. Select Pages to specify a specific page or range.
Insert blank page Selects whether to print the document on one side or both sides of the booklet. Check this check box to print the document on one side of the booklet and select the side to be left blank from the list. Uncheck this check box to print the document on both sides of the booklet. Margin Specifies the width of the stapling margin. The specified width becomes the stapling margin from the center of the sheet. Page Border Prints a page border line around each document page.
Copies Specifies the number of copies you want to print. You can specify a value from 1 to 999. Important If the application used to create your document has a similar function, specify the number of copies with the application without specifying it here. Print from Last Page/Collate Specifies the order in which to print document pages. Print from Last Page Check this check box when you want to print from the last page in order.
may be produced or the printing speed may decrease. If these problems occur, checking this check box may resolve the problems. Important Uncheck this check box under normal circumstances. This function does not work when ICM is selected for Color Correction on the Matching tab of the Manual Color Adjustment dialog box. Note Disable ICM required from the application software tab cannot be used with the XPS printer driver.
Print after creating print data by page The print data is created in page units, and printing starts after the processing of one page of print data is complete. If a printed document contains unintended results such as streaks, selecting this check box may improve the results. Important Uncheck this check box under normal circumstances.
Note Unit of Print Data Processing tab cannot be used with the XPS printer driver. Stamp/Background... (Stamp...) Opens the Stamp/Background (Stamp) dialog box. The Stamp function allows you to print a stamp text or a bitmap over or behind document data. It also allows you to print date, time and user name. The Background function allows you to print a light illustration behind the document data. Note With the XPS printer driver, the Stamp/Background... button has become the Stamp...
Stamp Type Specifies the stamp type. Select Text to create a stamp with characters. Select Bitmap to create with a bitmap file. Select Date/Time/User Name to display the creation date/time and user name of the printed document. The setting items in the Stamp tab change depending on the selected type. When Stamp Type is Text or Date/Time/User Name Stamp Text Specifies the stamp text string. Up to 64 characters can be entered.
Select File... Opens the dialog box to open a file. Click this button to select a bitmap file to be used as a stamp. Size Adjusts the size of the bitmap file to be used as a stamp. Moving the slider to the right increases the size, moving the slider to the left decreases the size. Transparent white area Specifies whether to make white-filled areas of the bitmap transparent. Check this check box to make white-filled areas of the bitmap transparent.
Save settings Tab The Save settings tab allows you to register a new stamp or delete an unnecessary stamp. Title Enter the title to save the stamp you created. Up to 64 characters can be entered. Note Spaces, tabs, and returns cannot be entered at the beginning or end of a title. Stamps Shows a list of saved stamp titles. Specify a title to display the corresponding stamp in Title. Save/Save overwrite Saves the stamp. Enter a title in Title, and then click this button. Delete Deletes an unnecessary stamp.
Check this check box to print a semi-transparent stamp over the printed document page. Uncheck this check box to print the stamp over the document data. The printed data may be hidden behind the stamp. Note You can use Print semitransparent stamp only with the XPS printer driver. Stamp first page only Selects whether the stamp is to be printed on the first page only or on all pages when the document has two or more pages. Check the Stamp check box to enable this.
Layout Method Specifies how the background image is to be placed on the paper. When Custom is selected, you can set coordinates for X-Position and YPosition. Intensity Adjusts the intensity of the bitmap to be used as a background. Moving the slider to the right increases the intensity, and moving the slider to the left decreases the intensity. To print the background at the original bitmap intensity, move the slider to the rightmost position.
Background first page only Selects whether to print the background on the first page only or print on all pages when the document has two or more pages. Check the Background check box to enable this. Check this check box to print a background on the first page only. Uncheck this check box to print a background on all pages.
Maintenance tab Description The Maintenance tab allows you to perform machine maintenance or change the settings of the machine. Cleaning Performs print head cleaning. Print head cleaning removes any blockage in the print head nozzles. Perform cleaning when printing becomes faint, or a specific color fails to print, even though all ink levels are sufficiently high. Deep Cleaning Performs deep cleaning. Perform deep cleaning when two cleaning attempts do not resolve the print head problem.
Selects the ink group that you want to clean the print head for. Click Initial Check Items to display the items that you need to check before you execute cleaning or deep cleaning. Initial Check Items Check that the machine power is on, and open the cover of the machine. Check the following items for each ink. Then, if necessary, perform Nozzle Check or Cleaning. • Check the amount of ink remaining in the cartridge. • Make sure that you push in the ink cartridge completely until you hear a clicking sound.
messages. The Print Head Alignment dialog box is then displayed. This dialog box allows you to check the printed pattern and adjust the print head position. Preview Window Displays the pattern of Print Head Alignment, and checks the position of the selected pattern. You can also change the setting by clicking the pattern on the screen directly.
Cleaning Performs print head cleaning. Print head cleaning removes any blockage in the print head nozzles. Perform cleaning when printing becomes faint, or if a specific color fails to print, even though all ink levels are sufficiently high. Initial Check Items Check that the machine power is on, and open the cover of the machine. Check the following items for each ink. Then, if necessary, perform Nozzle Check or Cleaning. • Check the amount of ink remaining in the cartridge.
Both Black and Color Uses the FINE cartridges installed on the machine, which are color and black. Important When a setting other than Plain Paper or Envelope is selected for Media Type on the Main tab, Black Only is disabled because the machine uses the color FINE cartridge to print documents. Do not detach the FINE cartridge that is not in use. Printing cannot be performed while either FINE cartridge is detached. Bottom Plate Cleaning Performs cleaning of the bottom plate of the machine.
Note If the machine is off or if communication between the machine and the computer is disabled, an error message may appear because the computer cannot collect the machine status. If this happens, click OK to display the most recent settings specified on your computer. Auto Power Settings dialog box When you click Auto Power, the Auto Power Settings dialog box is displayed. This dialog box allows you to manage the machine power from the printer driver. Auto Power On Selects the auto power-on setting.
Use quiet mode during specified hours Select this option when you wish to reduce the operating noise of the machine during a specified period of time. Set the Start time and the End time of the quiet mode you wish to be activated. If both are set to the same time, the quiet mode will not function. Important You can set the quiet mode from the operation panel of the machine, the printer driver, or ScanGear (scanner driver).
To rotate the document 90 degrees to the left when printing, select the check box. To rotate the document 90 degrees to the right when printing, clear the check box. Ink Drying Wait Time The machine can pause before printing a subsequent page. Moving the slider to the right increases the pause time, and moving the slider to the left decreases the time. If the paper gets stained because the next page is ejected before the ink on the printed page dries, increase the ink drying wait time.
Important If the font for displaying the language of your choice is not installed in your system, the characters will be garbled.
Canon IJ Preview Description Canon IJ Preview is an application software that displays what the print result will look like before a document is actually printed. The preview reflects the information that is set within the printer driver and allows you to check the document layout, print order, and number of pages. You can also change the media type. When you want to display a preview before printing, open the printer driver setup window, and check the Preview before printing check box on the Main tab.
Page Menu This menu includes the following commands to select page to be displayed. All of these commands except Select Page can also be selected from the toolbar. First Page Displays the first page of the document. If the currently displayed page is the first page, this command is grayed out and cannot be selected. Previous Page Displays the page located before the currently displayed page. If the currently displayed page is the first page, this command is grayed out and cannot be selected.
50% Reduces the displayed data to 50% of the actual size to be printed. 100% Displays the data at the actual size to be printed. 200% Enlarges the displayed data to 200% of the actual size to be printed. 400% Enlarges the displayed data to 400% of the actual size to be printed. Option Menu This menu includes the following command: Displays Print Page Information Displays print setup information (including printer paper size, media type, and page layout) for each page at the left side of the preview screen.
Page Layout Displays the page layout of the document to be printed. Important If the media type and paper source are set from the application software, those settings have priority and the changed settings may become ineffective.
Canon IJ XPS Preview Description Canon IJ XPS Preview is an application software that displays what the print result will look like before a document is actually printed. The preview reflects the information which is set within the printer driver and allows you to check the document layout, print order, and number of pages. The preview also allows you to edit the print document, edit the print pages, change the print settings, and perform other functions.
Print All Documents Prints all documents in the document list and closes the Canon IJ XPS Preview. Save Print History Switches whether the documents printed from the Canon IJ XPS Preview are to be saved as print history entries. History Entry Limit Switches the maximum number of print history registrations. Select 10 Entries, 30 Entries, or 100 Entries. Important If the limit on the number of registration is exceeded, the print history registrations are deleted starting from the oldest one.
The combined documents are separated, and the original documents are restored. This command has the same function as the (Reset Documents) on the toolbar. Move Document Use the following command to change the order of the documents selected in the document list. Move to First Moves the selected print document to the beginning of the document list. If the currently selected document is the first document, this command is grayed out and cannot be selected.
Duplex Printing... Opens the Duplex Printing dialog box. This dialog box allows you to set Duplex Printing (Manual), Stapling Side, and Margin. Copies... Opens the Copies dialog box. This dialog box allows you to set Copies, Collate, and Print from Last Page. Pages Selects the method for editing print pages. Delete Page Deletes the currently selected page. If page layout printing is set, the pages enclosed with red frame will be deleted.
View Menu Selects the documents and pages to be displayed. Documents Use the following command to select the document to display. First Document Displays the first document in the document list. If the currently selected document is the first document, this command is grayed out and cannot be selected. Previous Document Displays the document located before the currently displayed document. If the currently selected document is the first document, this command is grayed out and cannot be selected.
Last Page Displays the last page of the document. If the currently displayed page is the last page, this command is grayed out and cannot be selected. Page Selection... Displays the Page Selection dialog box. This command allows you to specify the page number of the page to be displayed.
View Print Settings Area Displays the print settings area at the right side of the preview window. View Deleted Pages When the thumbnails are displayed, this function displays pages that were deleted with the Delete Page function. To check deleted pages, you must first select the View Thumbnails check box. Keep printed documents on the list Leaves the printed document in the document list.
Move Document Use the following command to change the order of the documents selected in the document list. (Move to First) Moves the selected print document to the beginning of the document list. If the currently selected document is the first document, this command is grayed out and cannot be selected. (Move Up One) Moves the selected print document one up from its current position. If the currently selected document is the first document, this command is grayed out and cannot be selected.
Important The number displayed in Pages and the output page count are different. To check the output page count, check the status bar at the bottom of the preview window. Status Displays the status of the print documents. Documents that are undergoing data processing are displayed as Processing data. Important Documents showing Processing data cannot be printed or edited. Wait until the data processing ends.
Cyan/Magenta/Yellow Adjusts the strengths of Cyan, Magenta, and Yellow. Moving the slider to the right makes a color stronger, and moving the slider to the left makes a color weaker. You can also directly enter a value linked to the slider. Enter a value in the range from -50 to 50. This adjustment changes the relative amount of ink of each color used, which alters the total color balance of the document. Use your application software if you want to change the total color balance significantly.
Duplex Printing (Manual) Select whether to print the document to both sides of the paper manually or to one side of the paper. If the duplex print settings cannot be changed for the print document, this item is grayed out and is unavailable. Important When you select Booklet for Page Layout, Duplex Printing (Manual) of the print settings area will be set automatically. In this case, Duplex Printing (Manual) is grayed out and is unavailable. Copies Specifies the number of copies you want to print.
Canon IJ Status Monitor Description The Canon IJ Status Monitor displays the status of the machine and the printing progress. The monitor uses graphics, icons, and messages to let you know the machine status. Canon IJ Status Monitor Features The Canon IJ Status Monitor offers the following advantages: You can check the status of the printer on the screen. The status of the machine is shown on the screen in real time. You can check the printing progress of each printing document (print job).
FINE cartridge Canon IJ Status Monitor shows an icon when a low ink warning or a no ink error occurs. In addition, this function displays graphics showing the estimated ink levels of the FINE cartridge. In this case, click the graphics to open the Ink Details dialog box. You can check the detail information such as the remaining ink level and the FINE cartridge types for your printer. Document Name Shows the name of the document to be printed. Owner Shows the owner's name of the document to be printed.
Start when Windows is Started Starts the Canon IJ Status Monitor automatically when you start Windows. Ink Details Menu Select this menu to display the Ink Details dialog box. Check the detail information such as the remaining ink level and the FINE cartridge types for your machine. Ink Details dialog box This function displays graphics and messages showing the FINE cartridge type and the estimated ink levels. Ink Information (displayed at left) Shows the FINE cartridge types with graphics.
Updating the MP Drivers Obtaining the Latest MP Drivers Deleting the Unnecessary MP Drivers Before Installing the MP Drivers Installing the MP Drivers 158
Obtaining the Latest MP Drivers The MP Drivers include a printer driver and ScanGear (scanner driver). By updating the MP Drivers to the latest version of the MP Drivers, unresolved problems may be solved. You can access our website and download the latest MP Drivers for your model. Important You can download the MP Drivers for free, but any Internet access charges incurred are your responsibility. Before installing the latest MP Drivers, delete the previously installed version.
Deleting the Unnecessary MP Drivers The MP Drivers which you no longer use can be deleted. When deleting the MP Drivers, first exit all programs that are running. The procedure to delete the unnecessary MP Drivers is as follows: 1. Start the uninstaller • If you are using Windows 8, from the Desktop charms, select Settings -> Control Panel -> Programs -> Programs and Features. From the program list, select "XXX MP Drivers" (where "XXX" is your model name) and then click Uninstall.
Important Printer driver, XPS printer driver, and ScanGear (scanner driver) will be deleted when you uninstall the MP Drivers.
Before Installing the MP Drivers This section describes the items that you should check before installing the MP Drivers. You should also refer to this section if the MP Drivers cannot be installed. Checking the Machine Status • Confirm that the USB port of this machine and the computer are firmly connected with the USB cable. • Turn off the machine. Checking the Personal Computer Settings • Terminate all running applications.
Installing the MP Drivers You can access our web site through the Internet and download the latest MP Drivers and XPS printer driver for your model. The procedure for installing the downloaded MP Drivers is as follows: 1. Turn off the machine 2. Start the installer Double-click the icon of the downloaded file. The installation program starts. Important In Windows 8, Windows 7, or Windows Vista, a confirmation/warning dialog box may appear when starting, installing or uninstalling software.
Important You can install the XPS printer driver with the same procedure for installing the MP Drivers. However, when installing the XPS printer driver, first complete installation of the MP Drivers. You can download the MP Drivers and XPS printer driver for free, but any Internet access charges incurred are your responsibility. Before installing the latest MP Drivers, delete the previously installed version.
Sharing the Printer on a Network When multiple computers are being used in the network environment, you can share the printer connected to one computer with the other computers. The Windows versions of the computers connected to the network do not necessarily have to be the same. • Settings on Print Server This section describes the procedure for setting a computer that connects with this printer directly through a USB cable.
Settings on Print Server When you use the printer on a network, set up the printer driver for sharing on the print server system. The procedure for setting up the print server systems is as follows: 1. Install the MP Drivers on the print server system 2. Select as described below: • If you are using Windows 8, from the Desktop charms, select Settings -> Control Panel -> Hardware and Sound -> Devices and Printers. • If you are using Windows 7, select the Start menu -> Devices and Printers.
When you are logged on to an administrator account, click Yes (or Continue, Allow) to continue. Some applications require an administrator account to continue. When you are logged on to a standard account, switch to an administrator account, and restart the operation from the beginning. Note Windows XP may display a message recommending the user to use the Network Setup Wizard to set up sharing. When this message appears, choose not to use the wizard and then set up sharing. 4.
Settings on Client PC After setting up the print server system, set up the client system. The procedure for setting up the client systems is as follows: If you are using Windows 8, Windows 7, or Windows Vista 1. Install the MP Drivers on the client systems Note You must manually select the connection destination on the client computer. During installation, click Cancel in the Connect Cable window. When the confirmation message appears, click Yes.
Take the appropriate action as described on the screen and then click Finish. • If you are using Windows 8 or Windows 7, the icon for the shared printer will be created in the Devices and Printers window. • If you are using Windows Vista, the icon for the shared printer will be created in the Printers window. The setup on the client systems is complete. You can now share the printer in the network. If you are using Windows XP 1.
4. Complete the setup Take the appropriate action as described on the screen and then click Finish. The icon for the shared printer will be created in the Printers and Faxes window. The setup on the client systems is complete. You can now share the printer in the network.
Restrictions on Printer Sharing If you are using the XPS printer driver, replace "Canon IJ Preview" with "Canon IJ XPS Preview" when reading this information. These are restrictions that apply when you are using a printer in a network environment. Check the restrictions for the environment you are using. When You Are Sharing a Printer in a Network • A print completion message may be displayed. To disable the message from being displayed, follow the procedure below.
If a client user opens the printer driver properties (to display the properties when using Windows 8 or Windows 7, press the Alt key, and select Printer properties from the displayed File menu) and then clicks OK with the Enable bidirectional support check box cleared on the Ports tab, the bidirectional communication function of the print server may also be disabled. In this case, check Enable bidirectional support check box on both the print server system and the client system.
Copying Making Copies Basic Switching the Page Size between A4 and Letter 173
Making Copies Load the original on the platen glass to copy. 1. Make sure that the machine is turned on. 2. Load A4 or Letter-sized plain paper. 3. Load the original on the platen glass. Note • You can switch the size of paper loaded in the rear tray between A4 and Letter. Switching the Page Size between A4 and Letter 4. Press the Color button for color copying, or the Black button for black & white copying. The machine starts copying. Remove the original on the platen glass after copying is complete.
Note • To cancel copying, press the Stop button. • To set the print quality to "Draft" (speed priority) You can set the print quality to "Draft" (speed priority) following the procedure below. 1. Press and hold down the Color or Black button for 2 or more seconds in step 4. The ON lamp flashes once. 2. Release the button. The machine starts copying. When the print quality is set to "Draft", print speed is given priority over quality.
Switching the Page Size between A4 and Letter You can switch the size of paper loaded on the rear tray between A4 and Letter. This setting is useful if you usually load Letter-sized paper in the rear tray. 1. Make sure that the machine is turned on. 2. Press and hold the Stop button until the Alarm lamp flashes 10 times. 3. Release the Stop button. The ON lamp starts flashing instead of remaining lit. 4. Press the Black button to select A4, or the Color button to select Letter.
