MG2500 series Online-Handbuch Scannen Deutsch (German)
Inhalt Scannen. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Scannen über den Computer. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Scannen mit IJ Scan Utility. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Was ist IJ Scan Utility (Scanner-Software)?. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Scannen Scannen über den Computer Scannen mit IJ Scan Utility Scannen mit dem Scanner-Treiber Hilfreiche Informationen über das Scannen Objekte platzieren (beim Scannen über den Computer) 3
Scannen über den Computer Scannen mit IJ Scan Utility Scannen mit dem Scanner-Treiber Hilfreiche Informationen über das Scannen Objekte platzieren (beim Scannen über den Computer) 4
Scannen mit IJ Scan Utility Was ist IJ Scan Utility (Scanner-Software)? Starten von IJ Scan Utility Einfaches Scannen mit dem automatischen Scan Grundlagen Fotos scannen Dokumente scannen Scannen mit bevorzugten Einstellungen Objekte scannen, die größer als die Auflagefläche sind (Bild zusammenfügen) Mehrere Objekte gleichzeitig scannen Speichern nach dem Prüfen der Scanergebnisse Gescannte Bilder per E-Mail versenden Extrahieren von Text aus gescannten Bildern (OCR) Bildschirme von IJ Scan Utility 5
Was ist IJ Scan Utility (Scanner-Software)? IJ Scan Utility ist eine Anwendung, mit der Sie auf einfache Weise Fotos, Dokumente usw. scannen können. Sie können mehrere Schritte, vom Scannen bis zum Speichern, gleichzeitig durchführen, indem Sie auf das entsprechende Symbol im Hauptbildschirm von IJ Scan Utility klicken. Funktionen von IJ Scan Utility Einfach gemäß Verwendungszweck scannen Sie können einfach durch Klicken auf Symbole scannen.
Wichtig Einige Funktionen sind nur verfügbar, wenn My Image Garden installiert ist. Hinweis Informationen zum Festlegen der zu integrierenden Anwendungen finden Sie unter "Dialogfenster Einstellungen".
Starten von IJ Scan Utility Wählen Sie im Menü Gehe zu (Go) des Finder die Option Programme (Applications). Doppelklicken Sie anschließend auf Canon Utilities, IJ Scan Utility und dann auf das Symbol Canon IJ Scan Utility2, um IJ Scan Utility zu starten.
Einfaches Scannen mit dem automatischen Scan Vereinfachen Sie das Scannen durch die automatische Erkennung des Objekttyps. Wichtig Die folgenden Objekttypen können möglicherweise nicht korrekt gescannt werden. Passen Sie in diesem Fall die Schnittrahmen (Auswahlfelder; Scan-Bereiche) im Bildschirm an, der durch Klicken auf Treiber (Driver) im Hauptbildschirm von IJ Scan Utility angezeigt wird und starten Sie den Scan erneut.
festgelegt ist. Das Dialogfenster wird angezeigt, wenn Sie auf Einst... (Settings...) klicken. Im Dialogfenster Einstellungen (Automatisch scannen) (Settings (Auto Scan)) können Sie ebenfalls erweiterte Einstellungen für das Scannen festlegen. Auf den folgenden Seiten finden Sie Informationen zum Scannen mit Angabe des Objekttyps.
Fotos scannen Sie können auf der Auflagefläche liegende Fotos mit den für Fotos geeigneten Einstellungen scannen. 1. Legen Sie das Foto auf die Auflagefläche. Objekte platzieren (beim Scannen über den Computer) 2. Starten Sie IJ Scan Utility. 3. Klicken Sie auf Einst... (Settings...), wählen Sie das Dialogfenster Einstellungen (Foto scannen) (Settings (Photo Scan)) und geben Sie das Papierformat, die Auflösung etc. an. Wenn Sie die Einstellungen vorgenommen haben, klicken Sie auf OK. 4.
Dokumente scannen Sie können auf der Auflagefläche liegende Objekte mit den für Dokumenten geeigneten Einstellungen scannen. 1. Legen Sie das Objekt auf die Auflagefläche. Objekte platzieren (beim Scannen über den Computer) 2. Starten Sie IJ Scan Utility. 3. Klicken Sie auf Einst... (Settings...), wählen Sie das Dialogfenster Einstellungen (Dokument scannen) (Settings (Document Scan)) und geben Sie das Papierformat, die Auflösung etc. an. Wenn Sie die Einstellungen vorgenommen haben, klicken Sie auf OK.
Scannen mit bevorzugten Einstellungen Sie können auf der Auflagefläche liegende Objekte mit Ihren bevorzugten und vorab gespeicherten Einstellungen scannen. Dies ist praktisch für das Speichern von häufig verwendeten Einstellungen und das Festlegen von detaillierten Scaneinstellungen. 1. Starten Sie IJ Scan Utility. 2. Klicken Sie auf Einst... (Settings...), wählen Sie das Dialogfenster Einstellungen (Benutzerdefiniert scannen) (Settings (Custom Scan)) und geben Sie die Quelle, die Auflösung etc. an.
Objekte scannen, die größer als die Auflagefläche sind (Bild zusammenfügen) Sie können die rechten und linken Hälften eines Objekts, das größer als die Auflagefläche ist, scannen und die gescannten Bilder anschließend wieder zu einem Bild zusammenfügen. Es werden Objekte unterstützt, die etwa doppelt so groß wie die Auflagefläche sind. Hinweis Nachfolgend wird beschrieben, wie mit dem Scannen des Objekts begonnen wird, das auf der linken Bildschirmseite angezeigt werden soll. 1.
5. Stellen Sie sicher, dass Von links scannen (Scan from Left) unter Scanrichtung (Scan Direction) ausgewählt ist. 6. Legen Sie das Objekt, das auf der linken Bildschirmseite angezeigt werden soll, mit dem Schriftbild nach unten auf die Auflagefläche. 7. Klicken Sie auf Scannen von Bild 1 beginnen (Start Scanning Image 1).
Das erste Objekt wird gescannt und in 1 angezeigt. Hinweis Klicken Sie auf Abbrechen (Cancel), um den Scanvorgang abzubrechen. 8. Legen Sie das Objekt, das auf der rechten Bildschirmseite angezeigt werden soll, mit dem Schriftbild nach unten auf die Auflagefläche. 9. Klicken Sie auf Scannen von Bild 2 beginnen (Start Scanning Image 2).
Das zweite Objekt wird gescannt und in 2 angezeigt. Hinweis Klicken Sie auf Abbrechen (Cancel), um den Scanvorgang abzubrechen. 10. Passen Sie die gescannten Bilder nach Ihren Vorstellungen an. Verwenden Sie die Symbolleiste zum Drehen und Vergrößern/Verkleinern, oder ziehen Sie die Bilder, um ihre Position zu ändern.
Hinweis Aktivieren Sie das Kontrollkästchen Schnittrahmen anpassen (Adjust cropping frames), um den zu speichernden Bereich festzulegen. Anpassen von Schnittrahmen im Fenster Bild zusammenfügen Zum erneuten Scannen eines Objekts wählen Sie das Bild im Vorschaubereich oder die Miniaturansicht oben im Bildschirm aus und klicken dann auf (Löschen). Das ausgewählte Bild wird gelöscht, und Sie können das Objekt erneut scannen. 11. Klicken Sie auf Speichern (Save). Das zusammengesetzte Bild wird gespeichert.
Mehrere Objekte gleichzeitig scannen Sie können zwei oder mehr Fotos (kleine Objekte) auf der Auflagefläche gleichzeitig scannen und jedes Bild einzeln speichern. Wichtig Die folgenden Objekttypen können möglicherweise nicht korrekt gescannt werden. Passen Sie in diesem Fall die Schnittrahmen (Auswahlfelder; Scan-Bereiche) im Bildschirm an, der durch Klicken auf Treiber (Driver) im Hauptbildschirm von IJ Scan Utility angezeigt wird und starten Sie den Scan erneut.
Das Dialogfenster Einstellungen wird angezeigt. 4. Klicken Sie auf Benutzerdefiniert scannen (Custom Scan). 5. Wählen Sie unter Quelle wählen (Select Source) den Typ der zu scannenden Objekte aus.
6. Wählen Sie Automatisch scannen (Auto scan) unter Papierformat (Paper Size) aus, und klicken Sie dann auf OK. Der Hauptbildschirm von IJ Scan Utility wird angezeigt. Hinweis Auf den folgenden Seiten finden Sie Einzelheiten zu den Einstellungselementen im Dialogfenster Einstellungen.
Dialogfenster Einstellungen (Foto scannen) Dialogfenster Einstellungen (Dokument scannen) Dialogfenster Einstellungen (Benutzerdefiniert scannen) 7. Klicken Sie auf Benutzerdef. (Custom). Es werden mehrere Objekte gleichzeitig gescannt. Hinweis Klicken Sie auf Abbrechen (Cancel), um den Scanvorgang abzubrechen. Gescannte Bilder werden in dem Ordner gespeichert, der unter Speichern in (Save in) im entsprechenden Dialogfenster Einstellungen festgelegt ist. Das Dialogfenster wird durch Klicken auf Einst...
Speichern nach dem Prüfen der Scanergebnisse Sie können die Scanergebnisse prüfen und die Bilder dann auf einem Computer speichern. Wichtig Sie können die Scanergebnisse nicht vor dem Speichern prüfen, wenn Sie mit der Einstellung Automatisch (Auto) scannen. Hinweis Die Bildschirme für das Scannen von Fotos werden in den folgenden Beschreibungen als Beispiele verwendet. 1. Starten Sie IJ Scan Utility. 2. Klicken Sie auf Einst... (Settings...). Das Dialogfenster Einstellungen wird angezeigt. 3.
4. Aktivieren Sie das Kontrollkästchen Scanergebnisse prüfen (Check scan results), und klicken Sie anschließend auf OK. Der Hauptbildschirm von IJ Scan Utility wird angezeigt. Hinweis Auf den folgenden Seiten finden Sie Einzelheiten zu den Einstellungselementen im Dialogfenster Einstellungen.
Hinweis Klicken Sie auf Abbrechen (Cancel), um den Scanvorgang abzubrechen. 6. Ändern Sie nach Bedarf die Bildfolge oder die Dateispeicheroptionen. Sie können die Bildfolge bzw. die Dateispeicheroptionen im Dialogfenster Speichereinstellungen (Save Settings) festlegen. Hinweis Der Standardspeicherordner ist der Ordner Bilder (Pictures). 7. Klicken Sie auf OK. Die gescannten Bilder werden wie angegeben gespeichert.
Gescannte Bilder per E-Mail versenden Sie können gescannte Bilder per E-Mail versenden. Hinweis Die Bildschirme für das Scannen von Fotos werden in den folgenden Beschreibungen als Beispiele verwendet. 1. Starten Sie IJ Scan Utility. 2. Klicken Sie auf Einst... (Settings...). Das Dialogfenster Einstellungen wird angezeigt. 3. Klicken Sie auf Foto scannen (Photo Scan).
4. Wählen Sie unter Anwendungseinstellungen (Application Settings) die Option An E-Mail anhängen (Attach to e-mail) und dann ein E-MailProgramm aus. Hinweis Sie können für Anhänge zu verwendende E-Mail-Programme aus dem PopupMenü hinzufügen. Wenn Keines (manuell anhängen) (None (Attach Manually)) ausgewählt ist, hängen Sie die gescannten und gespeicherten Bilder manuell an eine E-Mail an. 5. Klicken Sie auf OK.
Der Hauptbildschirm von IJ Scan Utility wird angezeigt. Hinweis Auf den folgenden Seiten finden Sie Einzelheiten zu den Einstellungselementen im Dialogfenster Einstellungen. Dialogfenster Einstellungen (Automatisch scannen) Dialogfenster Einstellungen (Foto scannen) Dialogfenster Einstellungen (Dokument scannen) Dialogfenster Einstellungen (Benutzerdefiniert scannen) Dialogfenster Einstellungen (Treiber) 6. Klicken Sie auf Foto (Photo). Der Scan-Vorgang wird gestartet.
Die gescannten Bilder werden entsprechend den im Dialogfenster Einstellungen vorgenommenen Einstellungen gespeichert. Wenn das Kontrollkästchen Scanergebnisse prüfen (Check scan results) im Dialogfenster Einstellungen aktiviert ist, wird das Dialogfenster Speichereinstellungen (Save Settings) angezeigt. Nachdem Sie die Speicheroptionen festgelegt und auf OK geklickt haben, werden die gescannten Bilder gespeichert und im festgelegten E-Mail-Programm automatisch an eine neue Nachricht angehängt. 7.
Extrahieren von Text aus gescannten Bildern (OCR) Scannen Sie Text in gescannten Zeitschriften und Zeitungen und zeigen Sie ihn in TextEdit von Mac OS an. Hinweis Sie können Text beim Scannen über Dokument (Document), Benutzerdef. (Custom) oder Treiber (Driver) extrahieren. Die Bildschirme für das Scannen von Dokumenten werden in den folgenden Beschreibungen als Beispiele verwendet. 1. Starten Sie IJ Scan Utility. 2. Klicken Sie auf Einst... (Settings...). Das Dialogfenster Einstellungen wird angezeigt.
Hinweis Für Auflösung (Resolution) kann nur 300 dpi oder 400 dpi eingestellt werden, wenn OCR starten (Start OCR) unter Anwendungseinstellungen (Application Settings) ausgewählt wurde. 4. Wählen Sie unter Anwendungseinstellungen (Application Settings) die Option OCR starten (Start OCR) aus, und wählen Sie dann die Anwendung zum Anzeigen des Ergebnisses aus. Hinweis Wird My Image Garden angegeben, wird nach dem Scannen des Bilds der Text im Bild extrahiert und in TextEdit von Mac OS angezeigt. 5.
Der Hauptbildschirm von IJ Scan Utility wird angezeigt. Hinweis Auf den folgenden Seiten finden Sie Einzelheiten zu den Einstellungselementen im Dialogfenster Einstellungen. Dialogfenster Einstellungen (Dokument scannen) Dialogfenster Einstellungen (Benutzerdefiniert scannen) Dialogfenster Einstellungen (Treiber) 6. Klicken Sie auf Dokument (Document). Der Scan-Vorgang wird gestartet.
Der Text, der in TextEdit von Mac OS angezeigt wird, dient nur der Orientierung.
Bildschirme von IJ Scan Utility Hauptbildschirm von IJ Scan Utility Dialogfenster Einstellungen Dialogfenster Einstellungen (Automatisch scannen) Dialogfenster Einstellungen (Foto scannen) Dialogfenster Einstellungen (Dokument scannen) Dialogfenster Einstellungen (Benutzerdefiniert scannen) Dialogfenster Einstellungen (Scannen und zusammenfügen) Dialogfenster Einstellungen (Treiber) Dialogfenster Einstellungen (Allgemeine Einstellungen) Dialogfenster Datenformateinstellungen Dialogfenster Speichereinstellun
Hauptbildschirm von IJ Scan Utility Wählen Sie im Menü Gehe zu (Go) des Finder die Option Programme (Applications). Doppelklicken Sie anschließend auf Canon Utilities, IJ Scan Utility und dann auf das Symbol Canon IJ Scan Utility2, um IJ Scan Utility zu starten. Sie können verschiedene Arbeitsschritte, vom Scannen bis zum Speichern, auf einmal ausführen, indem Sie auf das entsprechende Symbol klicken.
Zeigt das Fenster Bild zusammenfügen (Image Stitch) an, in dem Sie die rechten und linken Hälften eines Objekts, das größer als die Auflagefläche ist, scannen und die gescannten Bilder anschließend in einem Bild zusammenfügen können. Im Dialogfenster Einstellungen (Scannen und zusammenfügen) (Settings (Scan and Stitch)) können die Einstellungen für das Scannen/Speichern und das Verhalten nach dem Scannen angegeben werden.
Dialogfenster Einstellungen Das Dialogfenster Einstellungen hat zwei Registerkarten: (Scannen über den Computer) und (Allgemeine Einstellungen). Wenn Sie auf eine Registerkarte klicken, ändert sich die Ansicht im roten Rahmen, und Sie können erweiterte Einstellungen für Funktionen auf den Registerkarten vornehmen. Registerkarte (Scannen über den Computer) Sie können das Verhalten für das Scannen über IJ Scan Utility oder My Image Garden festlegen.
Dialogfenster Einstellungen (Allgemeine Einstellungen) 38
Dialogfenster Einstellungen (Automatisch scannen) Klicken Sie auf der Registerkarte (Scannen über den Computer) auf Automatisch scannen (Auto Scan), um das Dialogfenster Einstellungen (Automatisch scannen) (Settings (Auto Scan)) anzuzeigen. Im Dialogfenster Einstellungen (Automatisch scannen) (Settings (Auto Scan)) können Sie erweiterte Scaneinstellungen vornehmen, um mit automatischer Erkennung des Objekttyps zu scannen.
Einstellungen (Dokument scannen) (Settings (Document Scan)) oder Einstellungen (Benutzerdefiniert scannen) (Settings (Custom Scan)) an, und klicken Sie dann im Hauptbildschirm von IJ Scan Utility auf Foto (Photo), Dokument (Document) oder Benutzerdef. (Custom). Folgende Objekte können mit Automatisch (Auto) nicht ordnungsgemäß gescannt werden. Fotos im Format A4 Textdokumente, die kleiner als 2L (127 mm x 178 mm) (5 Zoll x 7 Zoll) sind, z. B.
Geben Sie den Dateinamen des zu speichernden Bilds ein. Wenn Sie eine Datei speichern, werden das Datum und vier Ziffern im Format "_20XX0101_0001" angehängt. • Datenformat (Data Format) Automatisch (Auto) ist ausgewählt. Die folgenden Datenformate werden beim Speichern automatisch gemäß dem Objekttyp angewendet. - Fotos, Postkarten, BDs/DVDs/CDs und Visitenkarten: JPEG - Zeitschriften, Zeitungen und Dokumente: PDF Wichtig Das Speicherformat kann je nach Platzierung des Objekts unterschiedlich sein.
Wählen Sie diese Option aus, wenn Sie die gescannten Bilder unverändert in einer Anwendung verwenden möchten, in der Sie die Bilder durchsuchen oder organisieren können. Sie können die Anwendung über das Popup-Menü angeben. • An Ordner senden (Send to a folder) Wählen Sie diese Option aus, wenn Sie die gescannten Bilder ebenfalls in einem anderen Ordner als dem unter Speichern in (Save in) angegebenen Ordner speichern möchten. Sie können den Ordner über das Popup-Menü angeben.
Dialogfenster Einstellungen (Foto scannen) Klicken Sie auf der Registerkarte (Scannen über den Computer) auf Foto scannen (Photo Scan), um das Dialogfenster Einstellungen (Foto scannen) (Settings (Photo Scan)) anzuzeigen. Im Dialogfenster Einstellungen (Foto scannen) (Settings (Photo Scan)) können Sie erweiterte Einstellungen für das Scannen von Objekten als Fotos festlegen.
Wählen Sie den Farbmodus, in dem das Objekt gescannt werden soll. • Papierformat (Paper Size) Wählen Sie die Größe des zu scannenden Objekts aus. Wenn Sie die Option Benutzerdefiniert (Custom) auswählen, wird ein Bildschirm angezeigt, in dem Sie das Papierformat angeben können. Wählen Sie eine Option für Einheit (Unit), geben Sie die Breite (Width) und Höhe (Height) an, und klicken Sie dann auf OK.
Sie können JPEG/Exif, TIFF oder PNG auswählen. Wichtig Die Option JPEG/Exif kann nicht ausgewählt werden, wenn für Farbmodus (Color Mode) die Einstellung Schwarzweiß (Black and White) gewählt wurde. • Einst... (Settings...
Wählen Sie diese Option aus, wenn Sie die gescannten Bilder ebenfalls in einem anderen Ordner als dem unter Speichern in (Save in) angegebenen Ordner speichern möchten. Sie können den Ordner über das Popup-Menü angeben. • An E-Mail anhängen (Attach to e-mail) Wählen Sie die Option aus, wenn Sie die gescannten Bilder an E-Mails anhängen möchten. Sie können das zu startende E-Mail-Programm aus dem Popup-Menü auswählen.
Dialogfenster Einstellungen (Dokument scannen) Klicken Sie auf der Registerkarte (Scannen über den Computer) auf Dokument scannen (Document Scan), um das Dialogfenster Einstellungen (Dokument scannen) (Settings (Document Scan)) anzuzeigen. Im Dialogfenster Einstellungen (Dokument scannen) (Settings (Document Scan)) können Sie erweiterte Einstellungen für das Scannen von Objekten als Dokumente festlegen.
Dokumente scannen: Dokument (Document) Zeitschriften scannen: Zeitschrift (Magazine) • Farbmodus (Color Mode) Wählen Sie den Farbmodus, in dem das Objekt gescannt werden soll. • Papierformat (Paper Size) Wählen Sie die Größe des zu scannenden Objekts aus. Wenn Sie die Option Benutzerdefiniert (Custom) auswählen, wird ein Bildschirm angezeigt, in dem Sie das Papierformat angeben können. Wählen Sie eine Option für Einheit (Unit), geben Sie die Breite (Width) und Höhe (Height) an, und klicken Sie dann auf OK.
Aktivieren Sie dieses Kontrollkästchen, um den Text in einem Dokument oder Magazin zu schärfen und dadurch besser lesbar zu machen. Wichtig Der Farbton kann aufgrund der Korrekturen von dem des Originalbilds abweichen. Deaktivieren Sie in diesem Fall das Kontrollkästchen und scannen Sie. Hinweis Der Scan-Vorgang dauert länger als gewöhnlich, wenn Sie diese Funktion aktivieren. • Kontor schärfen (Sharpen outline) Verstärkt die Konturen der Motive, um die Bildschärfe zu erhöhen.
Wichtig Die folgenden Dokumenttypen werden möglicherweise nicht ordnungsgemäß korrigiert, da der Text nicht ordnungsgemäß erkannt werden kann.
Geben Sie den Dateinamen des zu speichernden Bilds ein. Wenn Sie eine Datei speichern, werden das Datum und vier Ziffern im Format "_20XX0101_0001" angehängt. • Datenformat (Data Format) Wählen Sie das Datenformat, in dem die gescannten Bilder gespeichert werden sollen. Sie können JPEG/Exif, TIFF, PNG, PDF oder PDF (Mehrere Seiten) (PDF (Multiple Pages)) auswählen.
Wählen Sie die Option aus, wenn Sie die gescannten Bilder verbessern oder korrigieren möchten. Sie können die Anwendung über das Popup-Menü angeben. • An Anwendung senden (Send to an application) Wählen Sie diese Option aus, wenn Sie die gescannten Bilder unverändert in einer Anwendung verwenden möchten, in der Sie die Bilder durchsuchen oder organisieren können. Sie können die Anwendung über das Popup-Menü angeben.
Dialogfenster Einstellungen (Benutzerdefiniert scannen) Klicken Sie auf der Registerkarte (Scannen über den Computer) auf Benutzerdefiniert scannen (Custom Scan), um das Dialogfenster Einstellungen (Benutzerdefiniert scannen) (Settings (Custom Scan)) anzuzeigen. Im Dialogfenster Einstellungen (Benutzerdefiniert scannen) (Settings (Custom Scan)) können Sie erweiterte Einstellungen für das Scannen mit Ihren bevorzugten Einstellungen festlegen.
In diesem Fall werden auch Farbmodus (Color Mode), Papierformat (Paper Size) und Auflösung (Resolution) automatisch festgelegt. Wichtig Folgende Objekttypen werden von der Einstellung Automatisch (Auto) unterstützt: Fotos, Postkarten, Visitenkarten, Zeitschriften, Zeitungen, Dokumente und BDs/ DVDs/CDs. Legen Sie zum Scannen der folgenden Objekttypen den Typ oder die Größe des Objekts fest. Folgende Objekte können mit Automatisch (Auto) nicht ordnungsgemäß gescannt werden.
Einheit (Unit), geben Sie die Breite (Width) und Höhe (Height) an, und klicken Sie dann auf OK. Hinweis Ist für Quelle wählen (Select Source) die Option Automatisch (Auto) ausgewählt, ist nur Automatisch (Auto) verfügbar. Klicken Sie im Bildschirm, in dem das Papierformat festgelegt werden kann, auf Standard (Defaults), um die festgelegten Einstellungen auf die Standardeinstellungen zurückzusetzen. • Auflösung (Resolution) Wählen Sie die Auflösung des zu scannenden Objekts aus.
Hinweis Der Scan-Vorgang dauert länger als gewöhnlich, wenn Sie diese Funktion aktivieren. Wenn für Quelle wählen (Select Source) die Option Foto (Photo) ausgewählt ist Wichtig Ist für Farbmodus (Color Mode) die Option Schwarzweiß (Black and White) festgelegt, ist Bildverarbeitungs-Einstellungen (Image Processing Settings) nicht verfügbar. • Kontor schärfen (Sharpen outline) Verstärkt die Konturen der Motive, um die Bildschärfe zu erhöhen.
Reduziert Moiré-Effekte. Gedruckte Materialien werden durch eine Ansammlung feiner Punkte wiedergegeben. Moiré ist ein Effekt, bei dem die Farbverläufe des Bildes ungleichmäßig werden und ein Streifenmuster auf dem Bild entsteht, wenn Fotos oder Bilder mit feinen Punkten gescannt werden. Mit der Funktion Hinweis Das Scannen dauert länger als gewöhnlich, wenn Sie Moiré reduzieren (Reduce moire) aktivieren.
• Ausrichtung von Textdokumenten erkennen und Bilder drehen (Detect the orientation of text document and rotate image) Erkennt die Ausrichtung des Texts im gescannten Dokument und dreht das Bild in die richtige Ausrichtung. Wichtig Es werden nur Textdokumente in den Sprachen unterstützt, die unter Sprache des Dokuments (Document Language) im Dialogfenster Einstellungen (Allgemeine Einstellungen) (Settings (General Settings)) ausgewählt werden können.
Wenn OCR starten (Start OCR) unter Anwendungseinstellungen (Application Settings) ausgewählt ist, können Sie PDF, PDF (Mehrere Seiten) (PDF (Multiple Pages)) und Automatisch (Auto) nicht auswählen. Hinweis Automatisch (Auto) wird nur angezeigt, wenn Automatisch (Auto) für Quelle wählen (Select Source) ausgewählt ist. • Einst... (Settings...
Wählen Sie diese Option aus, wenn Sie die gescannten Bilder unverändert in einer Anwendung verwenden möchten, in der Sie die Bilder durchsuchen oder organisieren können. Sie können die Anwendung über das Popup-Menü angeben. • An Ordner senden (Send to a folder) Wählen Sie diese Option aus, wenn Sie die gescannten Bilder ebenfalls in einem anderen Ordner als dem unter Speichern in (Save in) angegebenen Ordner speichern möchten. Sie können den Ordner über das Popup-Menü angeben.
Dialogfenster Einstellungen (Scannen und zusammenfügen) Klicken Sie auf der Registerkarte (Scannen über den Computer) auf Scannen und zusammenfügen (Scan and Stitch), um das Dialogfenster Einstellungen (Scannen und zusammenfügen) (Settings (Scan and Stitch)) anzuzeigen. Im Dialogfenster Einstellungen (Scannen und zusammenfügen) (Settings (Scan and Stitch)) können Sie erweiterte Einstellungen für das Scannen von Objekten festlegen, die größer als die Auflagefläche sind.
Dokumente scannen: Dokument (Document) Zeitschriften scannen: Zeitschrift (Magazine) Hinweis Um den Moiré-Effekt zu reduzieren, setzen Sie Quelle wählen (Select Source) auf Zeitschrift (Magazine). • Farbmodus (Color Mode) Wählen Sie den Farbmodus, in dem das Objekt gescannt werden soll. • Auflösung (Resolution) Wählen Sie die Auflösung des zu scannenden Objekts aus. Je höher der Wert für die Auflösung, desto detailreicher ist das Bild.
Hinweis Das Scannen dauert länger als gewöhnlich, wenn Sie Moiré reduzieren (Reduce moire) aktivieren. (2) Bereich Speichereinstellungen • Dateiname (File Name) Geben Sie den Dateinamen des zu speichernden Bilds ein. Wenn Sie eine Datei speichern, werden das Datum und vier Ziffern im Format "_20XX0101_0001" angehängt. • Datenformat (Data Format) Wählen Sie das Datenformat, in dem die gescannten Bilder gespeichert werden sollen.
Wichtig Wenn das Dialogfenster Einstellungen über My Image Garden geöffnet wird, wird diese Option nicht angezeigt. (3) Bereich Anwendungseinstellungen • Mit Anwendung öffnen (Open with an application) Wählen Sie die Option aus, wenn Sie die gescannten Bilder verbessern oder korrigieren möchten. Sie können die Anwendung über das Popup-Menü angeben.
Dialogfenster Einstellungen (Treiber) Klicken Sie auf der Registerkarte (Scannen über den Computer) auf Treiber (Driver), um das Dialogfenster Einstellungen (Treiber) (Settings (Driver)) anzuzeigen. Im Dialogfenster Einstellungen (Treiber) (Settings (Driver)) können Sie angeben, wie Bilder beim Scannen mit dem Scanner-Treiber in IJ Scan Utility gespeichert werden sollen und das Verhalten nach dem Scannen festlegen.
Sie können JPEG/Exif, TIFF, PNG, PDF oder PDF (Mehrere Seiten) (PDF (Multiple Pages)) auswählen. Hinweis Wenn PDF oder PDF (Mehrere Seiten) (PDF (Multiple Pages)) ausgewählt ist, können Bilder mit maximal 9.600 Pixel x 9.600 Pixel gescannt werden.
Zeigt das Dialogfenster Speichereinstellungen (Save Settings) nach dem Scannen an. Wichtig Wenn das Dialogfenster Einstellungen über My Image Garden geöffnet wird, wird diese Option nicht angezeigt. (2) Bereich Anwendungseinstellungen • Mit Anwendung öffnen (Open with an application) Wählen Sie die Option aus, wenn Sie die gescannten Bilder verbessern oder korrigieren möchten. Sie können die Anwendung über das Popup-Menü angeben.
Öffnet dieses Handbuch. • Standard (Defaults) Sie können die Einstellungen im angezeigten Bildschirm auf die Standardeinstellungen zurücksetzen.
Dialogfenster Einstellungen (Allgemeine Einstellungen) Klicken Sie auf die Registerkarte (Allgemeine Einstellungen), um das Dialogfenster Einstellungen (Allgemeine Einstellungen) (Settings (General Settings)) anzuzeigen.
• Sprache des Dokuments (Document Language) Wählen Sie die Sprache für die Erkennung von Text in Bildern aus. • Speicherordner für temporäre Dateien (Folder to Save Temporary Files) Zeigt den Ordner an, in dem Bilder temporär gespeichert werden sollen. Klicken Sie auf Durchsuchen... (Browse...), um den Zielordner festzulegen. • Anweisungen (Instructions) Öffnet dieses Handbuch. • Standard (Defaults) Sie können die Einstellungen im angezeigten Bildschirm auf die Standardeinstellungen zurücksetzen.
Dialogfenster Datenformateinstellungen Das Dialogfenster Datenformateinstellungen (Data Format Settings) können Sie über folgende Methoden anzeigen. • Klicken auf Einstellungen... (Settings...) unter Speichereinstellungen (Save Settings) auf jeder Registerkarte des Dialogfensters Einstellungen • Klicken auf Einstellungen... (Settings...
Komprimiert die Dateigröße beim Speichern, so dass die Last auf Ihrem Netzwerk/ Server verringert wird. Hinweis Wenn Schwarzweiß (Black and White) für Farbmodus (Color Mode) auf der Registerkarte (Scannen über den Computer) des Dialogfensters Einstellungen ausgewählt ist, werden PDF-Dateien mit der Einstellung Standard gespeichert, selbst wenn Hoch (High) festgelegt ist.
Dialogfenster Speichereinstellungen Aktivieren Sie das Kontrollkästchen Scanergebnisse prüfen (Check scan results) unter Speichereinstellungen (Save Settings) im Dialogfenster Einstellungen, um nach dem Scannen das Dialogfenster Speichereinstellungen (Save Settings) anzuzeigen. Sie können das Datenformat und das Ziel festlegen, während Sie sich die Scanergebnisse in Miniaturansicht ansehen.
Wichtig Die Bedienschaltflächen der Vorschau werden nicht angezeigt, wenn das Kontrollkästchen Großformatige Bildscans aktivieren (Enable large image scans) im Dialogfenster Einstellungen (Treiber) (Settings (Driver)) aktiviert ist. (2) Bereich Scanergebnisse Zeigt die Miniaturansichten der gescannten Bilder an. Sie können die Speicherreihenfolge von Bildern per Drag & Drop ändern. Die Dateinamen für das Speichern werden unter den Miniaturansichten angezeigt.
für PDF-Dateien und ihren Komprimierungstyp sowie das Datenformat für das Speichern von automatisch gescannten Bildern festlegen können. • Speichern in (Save in) Zeigt den Ordner an, in dem die gescannten Bilder gespeichert werden sollen. Geben Sie zum Ändern des Ordners den Zielordner im Dialogfenster an, das Sie durch Auswählen von Hinzufügen... (Add...) im Popup-Menü anzeigen können. Der Standardspeicherordner ist der Ordner Bilder (Pictures).
Fenster Bild zusammenfügen Klicken Sie im Hauptbildschirm von IJ Scan Utility auf Zusammenf. (Stitch), um das Fenster Bild zusammenfügen (Image Stitch) anzuzeigen. Sie können die rechten und linken Hälften eines Objekts, das größer als die Auflagefläche ist, scannen und die gescannten Bilder anschließend zu einem Bild zusammenfügen. Sie können Objekte scannen, die etwa doppelt so groß wie die Auflagefläche sind.
Scannt die linke und die rechte Hälfte eines Objekts, das doppelt so groß wie das Letter-Format ist, separat. • Ganze Auflagefläche x 2 (Full Platen x 2) Scannt die linke und die rechte Hälfte eines Objekts, das doppelt so groß wie die Auflagefläche ist, separat. • Scanrichtung (Scan Direction) • Von links scannen (Scan from Left) Zeigt das erste gescannte Bild auf der linken Seite an. • Von rechts scannen (Scan from Right) Zeigt das erste gescannte Bild auf der rechten Seite an.
• Schnittrahmen anpassen (Adjust cropping frames) Sie können den Scan-Bereich in der Vorschau anpassen. Wird kein Bereich festgelegt, wird das Bild in der Größe gespeichert, die unter Ausgabegröße wählen (Select Output Size) ausgewählt ist. Wird ein Bereich festgelegt, wird nur das Bild im Schnittrahmen gescannt und gespeichert. Anpassen von Schnittrahmen im Fenster Bild zusammenfügen • Speichern (Save) • Speichern (Save) Speichert die beiden gescannten Bilder als ein Bild.
Klicken Sie bei gedrückter Ctrl-Taste in den Vorschaubereich, um das angezeigte Bild zu verkleinern. • (Nach links drehen) Das Vorschaubild wird um 90 Grad gegen den Uhrzeigersinn gedreht. • (Vertikal invertieren) Das Vorschaubild wird um 180 Grad gedreht. • (Nach rechts drehen) Das Vorschaubild wird um 90 Grad im Uhrzeigersinn gedreht. • (Handbuch öffnen) Öffnet diese Seite. (3) Miniaturansichtsbereich • Miniaturansichtsbereich Zeigt die Miniaturansichten der gescannten Bilder an.
• Nach dem Scannen des ersten Objekts durch Klicken auf Scannen von Bild 1 beginnen (Start Scanning Image 1) Das Bild wird in der unter Scanrichtung (Scan Direction) festgelegten Richtung gescannt, und 2 wird neben dem Bild angezeigt. • Nach dem Scannen des zweiten Objekts durch Klicken auf Scannen von Bild 2 beginnen (Start Scanning Image 2) Die beiden gescannten Bilder werden angezeigt.
Scannen mit dem Scanner-Treiber Sie können scannen, indem Sie den Scanner-Treiber aus verschiedenen Anwendungen aus starten. Weitere Informationen zum Scannen finden Sie in der Hilfe zu Mac OS. Wichtig Beim Scannen mit dem Scanner-Treiber in Mac OS X v10.6.8 wählen Sie JPEG oder TIFF unter Format. Die gescannten Bilder werden in dem Format gespeichert, das Sie unter Datenformat (Data Format) im Dialogfenster Einstellungen (Treiber) (Settings (Driver)) von IJ Scan Utility gewählt haben.
Bilderkorrekturen und Farbeinstellungen Im Scanner-Treiber können Sie die Bilder korrigieren und die Farbe einstellen. Wichtig Wenn Sie die Bildkorrektur oder Farbeinstellung auf Objekte ohne Moiré-Effekte, Staub, Kratzer oder verblasste Farben anwenden, könnte sich dies ungünstig auf den Farbton auswirken. Die Ergebnisse der Bildkorrektur werden nicht im Testscan-Bildschirm angezeigt. Hinweis Die angezeigten Bildschirme können sich je nach Anwendung unterscheiden.
Die Bildanpassung wird beim automatischen Erkennen des Objekttyps angewendet. Es wird empfohlen, diese Einstellung grundsätzlich zu verwenden. • Foto (Photo) Die für Fotos geeigneten Bildanpassungen werden vorgenommen. • Zeitschrift (Magazine) Die für Zeitschriften geeigneten Bildanpassungen werden vorgenommen. • Dokument (Document) Die für Textdokumente geeigneten Bildanpassungen werden vorgenommen.
• Farbkorrektur (Fading Correction) Verwenden Sie diese Funktion zum Korrigieren von Fotos, die mit der Zeit verblasst sind oder die einen Farbstich haben. Ein "Farbstich" entsteht, wenn eine Farbe aufgrund der Wetterverhältnisse bei der Aufnahme oder aufgrund starker Umgebungsfarben ein Bild dominiert. • Ohne (None) Die Farbkorrektur wird nicht angewendet. • Niedrig (Low) Wählen Sie diese Option, um eine geringe Verblassung der Farben und einen schwachen Farbstich zu korrigieren.
Wichtig Die Korrektur wird möglicherweise nicht ordnungsgemäß angewendet, wenn der Scan-Bereich zu klein ist. • Bundstegkorr. (Gutter Correction) Verwenden Sie diese Funktion, um Schatten zu entfernen, die beim Scannen von geöffneten Broschüren zwischen den Seiten auftreten. Text oder Zeilen, die durch gebogene Seiten unklar oder unscharf erscheinen, werden nicht korrigiert. • Ohne (None) Der Bundstegschatten wird nicht korrigiert.
Drücken Sie den Buchrücken während des Scan-Vorgangs wie beim VorschauScannen fest nach unten. Wenn die Bindung nicht flach aufliegt, kann die Korrektur nicht ordnungsgemäß angewendet werden. Wie das Objekt zu platzieren ist, hängt von Ihrem Gerätemodell und dem zu scannenden Objekt ab. • Scharfzeichnen (Unsharp Mask) Verstärkt die Konturen der Motive, um die Bildschärfe zu erhöhen. • Entrastern (Descreen) Reduziert Moiré-Effekte.
Der Scanner wird vor jedem Testscan und Scan kalibriert, um den richtigen Farbton der gescannten Bilder zu reproduzieren. Hinweis Je nach Computer kann die Kalibrierung einige Zeit dauern.
Allgemeine Hinweise (Scanner-Treiber) Der Scanner-Treiber unterliegt folgenden Einschränkungen. Beachten Sie folgende Punkte beim Verwenden des Scanner-Treibers. Scanner-Treiber-Einschränkungen • Wenn der Computer von mehreren Benutzern verwendet wird oder wenn Sie sich abund wieder angemeldet haben, wird möglicherweise die Meldung angezeigt, dass der Scanner-Treiber verwendet wird. Ziehen Sie in diesem Fall das USB-Kabel vom Computer ab und schließen Sie es wieder an.
Den Scanner-Treiber aktualisieren Den neuesten Scanner-Treiber erhalten Vor der Installation des Scanner-Treibers Installieren des Scanner-Treibers 89
Den neuesten Scanner-Treiber erhalten Durch eine Aktualisierung der aktuellen Version des Scanner-Treibers auf die neueste Version können einige Probleme behoben werden, die möglicherweise aufgetreten sind. Den Scanner-Treiber erhalten Um den Scanner-Treiber zu beziehen, greifen Sie auf unsere Website zu und laden Sie den Scanner-Treiber für Ihr Modell herunter. Wichtig Der Scanner-Treiber kann kostenlos heruntergeladen werden. Es fallen jedoch Internetverbindungsgebühren an.
Vor der Installation des Scanner-Treibers Prüfen Sie folgende Punkte, bevor Sie den Scanner-Treiber installieren. Prüfen Sie diese Punkte auch, wenn Sie den Scanner-Treiber nicht installieren können. Gerätestatus • Wenn das Gerät mit einem USB-Kabel an den Computer angeschlossen ist, ziehen Sie das USB-Kabel vom Computer ab. Computereinstellungen • Schließen Sie alle laufenden Anwendungen. • Melden Sie sich als Administrator beim Computer an.
Installieren des Scanner-Treibers Besuchen Sie unsere Website und laden Sie die neueste Version des Scanner-Treibers herunter. Führen Sie folgende Schritte aus, um die heruntergeladene Version des Scanner-Treibers zu installieren. 1. Aktivieren Sie das Volumen. Doppelklicken Sie auf die heruntergeladene Datenträger-Image-Datei. Die Datei wird dekomprimiert und der Datenträger wird geladen. 2. Starten Sie das Installationsprogramm. Doppelklicken Sie auf die Datei ".pkg" auf dem dekomprimierten Datenträger.
Hilfreiche Informationen über das Scannen Anpassen von Schnittrahmen im Fenster Bild zusammenfügen Auflösung Datenformate 93
Anpassen von Schnittrahmen im Fenster Bild zusammenfügen Beim "Zuschneiden" wählen Sie den Bildbereich aus, den Sie beibehalten möchten. Die übrigen Bildbereiche werden beim Scannen verworfen. Im Fenster Bild zusammenfügen (Image Stitch) können Sie einen Schnittrahmen auf dem im Vorschaubereich angezeigten Bild festlegen.
Schnittrahmen löschen Zum Löschen des Schnittrahmens deaktivieren Sie das Kontrollkästchen Schnittrahmen anpassen (Adjust cropping frames).
Auflösung Bei den gescannten Bilddaten handelt es sich um eine Ansammlung von Punkten, die Daten zur Helligkeit und Farbe der Darstellung enthalten. Die Dichte dieser Punkte wird "Auflösung" genannt. Die Auflösung bestimmt, wie viele Detailinformationen in Ihrem Bild enthalten sind. Die Einheit für die Auflösung ist dpi (dots per inch, Punkte pro Zoll). Bei dpi handelt es sich um die Anzahl der Punkte pro Zoll (2,5 cm). Je höher der Auflösungswert, desto detailreicher wird das Bild.
Wichtig Wenn Sie die Auflösung verdoppeln, vervierfacht sich die Datengröße des gescannten Bilds. Wenn die Datei zu groß ist, sinkt die Verarbeitungsgeschwindigkeit deutlich und es kann zu Beeinträchtigungen kommen, z. B. aufgrund von Speichermangel. Legen Sie die mindestens erforderliche Auflösung in Hinblick auf den Verwendungszweck des gescannten Bilds fest. Hinweis Wenn Sie das gescannte Bild beim Drucken vergrößern, legen Sie beim Scannen eine höhere Auflösung fest, als oben empfohlen wird.
Datenformate Sie können beim Speichern von gescannten Bildern ein Datenformat auswählen. Welches Datenformat Sie auswählen sollten, hängt davon ab, wie und mit welcher Anwendung Sie das Bild verwenden möchten. Je nach Anwendung und Betriebssystem (Windows oder Mac OS) stehen unterschiedliche Datenformate zur Verfügung. Nachfolgend finden Sie Informationen zu den verschiedenen Bilddatenformaten. PNG (Standard-Dateierweiterung: .png) Dieses Datenformat wird häufig auf Websites verwendet.
Es kann auf verschiedenen Computern und Betriebssystemen verwendet werden. Außerdem ist das Einbetten von Schriftarten möglich. Daher können Benutzer in unterschiedlichen Umgebungen diese Dateien ungeachtet der Unterschiede ganz einfach austauschen.
Objekte platzieren (beim Scannen über den Computer) Im Folgenden wird beschrieben, wie Objekte auf die Auflagefläche des Scanners oder Druckers zu legen sind. Platzieren Sie die zu scannenden Objekte entsprechend ihrem Typ ordnungsgemäß auf der Auflagefläche. Anderenfalls werden sie möglicherweise nicht richtig gescannt. Wichtig Legen Sie keine Gegenstände auf dem Vorlagendeckel ab. Beim Öffnen des Vorlagendeckels können die Objekte in den Scanner oder Drucker fallen und eine Fehlfunktion verursachen.
Bereiche des Dokuments, die sich im schraffierten Bereich befinden, werden nicht gescannt. Dokuments, die sich im schraffierten Bereich befinden, werden nicht gescannt. Wichtig Wichtig Informationen zu den Objektteilen, die nicht gescannt werden können, finden Sie auf der Startseite vom Online-Handbuch im Abschnitt "Auflegen von Originalen" des entsprechenden Modells. Große Objekte (z. B.
Hinweis In IJ Scan Utility können Sie bis zu 12 Objekte positionieren. Die Ausrichtung schräg liegender Objekte (maximal 10 Grad) wird automatisch korrigiert.