Service manual
Laser/scanner assembly
1. Remove the following assemblies:
●
Scanner assembly. See
Scanner assembly on page 60.
●
Right and left cover. See
Side covers on page 74.
●
Print-cartridge door. See
Print-cartridge door on page 76.
●
Rear cover and fuser cover. See
Rear cover and fuser cover on page 77.
●
Front cover. See
Front cover on page 79.
●
Scanner support frame. See
Scanner support frame on page 86.
2. Remove three screws (callout 1) and one sheet-metal bracket (callout 2).
Figure 5-63 Remove the laser/scanner (1 of 7)
2
1
1
ENWW Product base 89