Service manual

3. Release one tab and one spring (callout 3) and then remove right-side scanner-assembly locking

lever.

Figure 5-64 Remove the laser/scanner (2 of 7)

4. Push the shaft to the left to disengage it (you might need to release the left-side locking-lever

spring), and then rotate the shaft towards the front of the product until the left-side scanner-

assembly locking lever is in the down position.

NOTE: When the shaft is reinstalled, make sure that the locking levers and the cartridge-door

button (mounted to the shaft near the right-side locking lever) are correctly positioned. Verify that

the locking-lever tension springs are engaged in the slots in the chassis.

Figure 5-65 Remove the laser/scanner (3 of 7)

90 Chapter 5 Removal and replacement ENWW