Service manual

Problem-solving tools
Product information pages and reports
Information pages and reports reside within the product memory. These pages and reports help
diagnose and solve problems with the product.
NOTE: If the product language was not correctly set during installation, you can set the language
manually so the information pages print in one of the supported languages. Change the language by
using the System setup menu on the control panel or by using the embedded Web server.
Configuration page
The configuration page shows the current settings and product properties.
1. On the product control panel, press Setup.
2. Use the arrow buttons to select Reports, and then press OK.
3. Use the arrow buttons to select Config report, and then press OK.
Demo page
The demo page contains examples of text and graphics.
1. On the product control panel, press Setup.
2. Use the arrow buttons to select Reports, and then press OK.
3. Use the arrow buttons to select Demo page, and then press OK.
Menu map
The menu map shows the control-panel menus and available settings.
1. On the product control panel, press Setup.
2. Use the arrow buttons to select Reports, and then press OK.
3. Use the arrow buttons to select Menu structure, and then press OK.
ENWW Problem-solving tools 137