Canon Inkjet Photo All-In-One series Getting Started Read Me First Symbols Used in This Document Prohibited actions. Instructions including important information. • In this guide, Windows 7 operating system is referred to as Windows 7 and Windows Vista operating system as Windows Vista. • In this guide, the screens are based on Windows 7 Home Premium and Mac OS X v.10.6.x. (Unless noted otherwise, the screens are those of Windows 7.) 1 Preparation...................................................... P.
This machine contains both printed manuals and on-screen manuals to be viewed on a computer. The on-screen manuals are included on the Setup CD-ROM and are installed during the software installation. P r i n t e d Manuals On-Screen Manuals • G e t t i n g S t a r t ed (this manual) Describes how to set up and use your machine. Introduces the machine and its functions, the included manuals and application software.
1 Preparation 1 1 4 3 A 2 2 5 Make sure all the following items are supplied. 1. Ink tanks (5: BK, M, Y, PGBK, C) 2. Power cord • Do not install the machine where an object may fall on it. In addition, do not place any object on the top of the machine. It may fall into the machine when opening covers, resulting in malfunction. 3. Manuals 4. Setup CD-ROM (containing the drivers, applications and onscreen manuals) 5.
3 4 Use the { or } button (E) on the Operation Panel to select the language for the LCD, then press the OK button. 5 D C B When this screen appears, press the OK button, then go to the next step. 6 • If an unintended language is displayed on the LCD, press the Back button (F) to return to the Language selection screen. E F Insert the power cord into the connector on the left side at the back of the machine and into the wall outlet firmly. • Do NOT connect the USB cable at this stage.
Install the Ink Tanks 2 1 2 C C B D A Open the Paper Output Tray (A), then lift the Scanning Unit (Cover) (B) until it stops. Close the Document Cover (C) and lift it with the Scanning Unit (Cover). The Print Head Holder (D) moves to the installation position. If the Print Head Holder does not move, make sure that the machine is turned on. For details, refer to to on page 2 in "1 Preparation". Go to the next page.
3 4 E 5 F G H 1. Remove the orange tape completely. 2. Remove the protective film completely. Hold the ink tank with the orange protective cap (E) pointing up while being careful not to block the L-shape air hole (F). • Handle the ink tanks carefully. Do not drop or apply excessive pressure to them. • Be sure to use the supplied ink tanks. • If the orange tape remains on the L-shape air hole, ink may splash or the machine may not print properly.
6 7 8 I Tilt the ink tank, then insert it under the label and against the back end of the slot. Press the PUSH mark on the ink tank firmly until it clicks. Make sure that the color of the label matches the ink tank. When the installation is completed properly, the Ink lamp lights red. • Install in a well-lit environment. • Do not touch the Print Head Lock Lever (I). Install all the other ink tanks in the same way according to the color order indicated on the label.
9 10 Lift the Scanning Unit (Cover) slightly, then gently close it. Make sure that the LCD changes as shown in the illustration and go to the next step. Load plain paper in the Cassette by referring to "3 Load Paper" on page 7 and press the OK button. • It takes about 4 minutes before the LCD changes. • The machine may make some operating noises when preparing to print. This is normal operation. • If an error message is displayed on the LCD, make sure that the ink tanks are correctly installed.
1 2 3 Load Paper 3 C A Close the Paper Output Tray (A). B Pull out the Cassette (B). • The Cassette supports plain paper only. To load specialty paper including photo paper, refer from on page 9. Move the left Paper Guide (C) to the edge.
4 5 6 7 2 E D Slide the front Paper Guide (D) to align with the actual size of the paper. The front Paper Guide will click and stop when it aligns with the corresponding mark of paper size. 3 Load Paper 1 Load plain paper. Load paper with the printing side facing down. Align the paper to the right side of the Cassette (1), and slide the left Paper Guide completely against the left edge of the paper (2). Make sure that the height of the paper stack does not exceed the line (E).
8 9 10 11 3 F I 2 1 H G Prepare the Paper Support (F). 1. Open it. 2. Withdraw it upwards. 3. Tilt it back. Move the Paper Guides (G) to both edges. Load paper in the center of the Rear Tray (H). Load paper in portrait orientation with the printing side facing up. • Load specialty paper including photo paper in the Rear Tray. Slide the left and right Paper Guides against both edges of the paper. Make sure that the height of the paper stack does not exceed the line (I).
Install the Software 4 Do not connect the USB cable yet. • To use the machine by connecting it to a computer, software including the drivers needs to be copied (installed) to the computer's hard disk. The installation process takes about 20 minutes. (The installation time varies depending on the computer environment or the number of application software to be installed.) • Quit all running applications before installation. • Log on as the administrator (or a member of the Administrators group).
1 2 3 Windows 7/Windows Vista Windows XP A Click Run Msetup4.exe on the AutoPlay screen, then click Yes or Continue on the User Account Control dialog box. If the User Account Control dialog box reappears in following steps, click Yes or Continue. Press the ON button (A) to TURN OFF THE MACHINE. Operating noise may continue for up to 35 seconds until the machine turns off. • Do NOT connect the USB cable to the computer and the machine yet. If you have already connected the cable, disconnect it now.
4 5 Click Easy Install. Click Install. The drivers, application software, and on-screen manuals are installed. Follow any on-screen instructions to proceed with the software installation. • If you want to select particular items to install, click Custom Install.
Important Information for the Installation □ USB Port □ Necessary Information for the User Registration □ If the Extended Survey Program screen appears B When the Printer Connection screen appears, connect the machine to the computer with a USB cable. After connecting the cable, TURN ON THE MACHINE. The USB Port is located on the right side at the back of the machine.
6 7 □ Installing the XPS Printer Driver In Windows 7 and Windows Vista SP1 or later, the XPS Printer Driver can be installed additionally. To install, perform from in "4 Install the Software" on page 11. Click Custom Install in , then select XPS Printer Driver in the Custom Install screen. For details on useful functions of the XPS Printer Driver, refer to the on-screen manual: Advanced Guide. Click Exit to complete the installation.
Try Using the Machine 5 Use the O p e r a t i o n P a n e l o n t h e m a c h i n e t o p r i n t y o u r o w n i t e m s e a s i l y. Various a p p l i c a t i o n s o f t w a r e a r e i n s t a l l e d o n t h e c o m p u t e r a l o n g w i t h t h e drivers. Yo u c a n p r i n t c r e a t i v e i t e m s b y c o r r e c t i n g / e n h a n c i n g p h o t o s u s i n g the applicat i o n s o f t w a r e .
Pr in t Photos from a Memory Card Supported Memory Cards (Adapter required for Memory Stick Duo Memory Stick PRO Duo Memory Stick Micro .) Corresponding Card Slot CF Card Slot Location The Card Slot is located in the area indicated by the dotted line. Open the Card Slot Cover (A).
1 2 E C D Load 4" x 6" (10 x 15 cm) photo paper in the Rear Tray (C) in portrait orientation with the printing side facing up. Make sure that the Paper Output Tray (D) is open. If printing starts while the Paper Output Tray is closed, it will automatically open. • For details, refer from on page 9. While the HOME screen appears, open the Card Slot Cover, insert a memory card into the Card Slot.
3 4 1 F 2 3 G 1. Rotate the Scroll Wheel (F) to display a photo to print. 2. Press the [+] or [-] button to specify the number of copies. 3. Press the Color button (G). Printing will start. • When the machine is ready for printing, the Color button lights up. After printing, open the Card Slot Cover, pinch the memory card and pull it straight out. After removing the memory card, close the Card Slot Cover. • Do not remove the memory card while the Access lamp is flashing. Saved data may be damaged.
1 2 3 4 Try Copying E H 2 D 3 1 1 3 A C B I J F Load A4 or Letter-sized plain paper into the Cassette (A). This section describes how to perform a standard copy. • For details, refer to "3 Load Paper" on page 7. G 2 1. Open the Paper Output Tray (B). 2. Open the Output Tray Extension (C). 3. Open the Document Cover (D). If printing starts while the Paper Output Tray is closed, it will automatically open. Place the document face-down and align it with the Alignment Mark (E).
Pr int P hotos from a Computer 1 2 3 4 C A B Load 4" x 6" (10 x 15 cm) photo paper in the Rear Tray (A) in portrait orientation with the printing side facing up. Make sure that the Paper Output Tray (B) is open. If printing starts while the Paper Output Tray is closed, it will automatically open. This section explains how to print borderless photos using 4" x 6" (10 x 15 cm) Photo Paper Plus Glossy II.
General Specifications Specifications 6 Printing resolution (dpi) 9600* (horizontal) X 2400 (vertical) * Ink droplets can be placed with a pitch of 1/9600 inch at minimum. Interface USB Port: Hi-Speed USB *1 Direct Print Port: PictBridge Bluetooth v2.0 (Option) *2*3*4 USB flash drive *1 A computer that complies with Hi-Speed USB standard is required. Since the Hi-Speed USB interface is fully upwardly compatible with USB 1.1, it can be used at USB 1.1. *2 Maximum speed: 1.
Getting Help from Canon Email Tech Support — www.canontechsupport.com Please note, from there you will need to select your product, then click on the "Support by Email" link under Tech Support. Toll-Free Tech Support— 1-800-OK-CANON This option provides live telephone technical support, free of service charges, Monday-Friday (excluding holidays), during the warranty period. Telephone Device for the Deaf (TDD) support is available at 1-866-251-3752.
