Operation Manual

(B) Memory card
Note
If a memory card or USB flash drive is inserted on the HOME screen, copy standby screen,
etc., the photo selection screen in Select photo print will also appear.
For details, refer to the on-screen manual:
Advanced Guide
.
Do not insert memory card and USB flash drive at the same time. Also do not insert two or
more memory cards at the same time.
When Read/write attribute is set to Writable from USB PC or Writable from LAN PC, you cannot
print image data from the memory card using the Operation Panel on the machine. To print
image data from the memory card, select Device user settings in Device settings of Setup on
the HOME screen, and set Read/write attribute to Not writable from PC.
For details, refer to the on-screen manual:
Advanced Guide
.
* You can print image data from the USB flash drive regardless of the setting in Read/write
attribute.
3. Select photos to print.
(1)
Use the
or
button (
Scroll Wheel
) (C) to display a desired photo.
Note
may appear on the LCD while reading photos. If you use the
or
button (
Scroll
Wheel
) to display the photo while
appears on the LCD, the desired photo may not be
selected.
If you press the center
Function
button (D), the Change view/mode screen will appear.
This screen lets you change how photos are displayed. It also lets you select Trimming
mode for cropping photos.
See
Other Useful Functions
.
(2)
Use the [+] or [-] button (E) to specify the number of copies.
Note
If you press the Color
button without specifying the number of copies, one copy of the
selected photo will be printed.
(3)
Repeat the procedures of (1) and (2) to specify the number of copies for each
photo.
Note
Page 17 of 1037 pagesPrinting Photos Saved on the Memory Card / USB Flash Drive