Operation Manual

Important
Part of the memory card will protrude from the Card Slot, but do not force it into the slot any
further. This can damage the machine or the memory card.
Make sure that the memory card is correctly oriented before inserting it into the Card Slot. If
you force the memory card into the Card Slot in the wrong orientation, the memory card or the
machine can be damaged.
Do not insert more than one memory card at a time.
4.
Close the Card Slot Cover.
Removing the Memory Card
Important
If you used the Card Slot as the memory card drive of a computer, you must perform the "safe
removal" operation on your computer before physically removing the memory card from the
machine.
If you are connecting the machine with a USB cable, right-click the removable disk icon and click
Eject. If Eject does not appear on the screen, make sure that the
Access
lamp is lit, and then
remove the memory card.
If you used the Card Slot via the LAN, you do not need to perform the "safe removal" operation on
your computer.
1.
Open the Card Slot Cover.
2.
Make sure that the
Access
lamp is lit, and remove the memory card.
Hold the part of the memory card that is protruding and remove it straightforward from the machine.
Important
Do not remove the memory card while the
Access
lamp is flashing. The
Access
lamp flashes
while the machine is reading or writing data from/to the memory card. If you remove the
memory card or turn off the power while the
Access
lamp is flashing, the data saved on the
memory card can be damaged.
3.
Close the Card Slot Cover.
Page top
Page 27 of 1037 pagesInserting the Memory Card