Operation Manual

Advanced Guide
> Printing Using the Operation Panel of the Machine > Copying
> Displaying the Preview Screen
U035
Displaying the Preview Screen
Pressing the center Function button in the Copy standby screen allows you to preview an image of the
printout on the preview screen.
Important
The preview screen may not be available depending on the copy menu.
The original will be scanned to display the preview image. Therefore, do not open the Document
Cover until the preview screen is displayed.
Originals are rescanned after displaying the preview screen and before copying starts. Therefore,
do not open the Document Cover or remove the original from the Platen Glass until copying is
complete.
1.
Preview of the original
The original that is set on the Platen Glass is displayed. If the displayed image is skewed, refer to
Loading Paper / Originals
and reset the original properly, then display the preview screen again and
preview the original.
2.
Page size
A frame showing the selected page size appears over the image. The inside of the frame will be
printed.
3.
Magnification
The magnification setting, which was set when the preview screen was displayed, is displayed. If
the setting other than Fit to page is selected, you can change the magnification setting using the
button.
Page top
Page 396 of 1037 pagesDisplaying the Preview Screen