Operation Manual

Note
If the
OK
button is pressed, the screen to change the number of copies will appear.
See (3) of step 3 in
Printing Photos Saved on the Memory Card / USB Flash Drive .
If
appears at the upper left of the photo, it may not have been scanned properly. Press
the left
Function
button to select Rescan. Confirm the message, and repeat the
procedures from step 2 to scan the photo again.
Press the center
Function
button to display the trimming screen, and crop photos.
See
Cropping Photos
.
(4)
Repeat the procedures of (2) and (3) to specify the number of copies for each
photo.
(5)
Confirm the number of sheets to be used for printing the selected photos.
4.
Start printing.
(1)
Press the right
Function
button to select Print settings, and confirm the page
size, media type, print quality, etc.
Here we confirm that 4"x6" (10x15cm) is selected for Page size and the type of loaded photo paper for
Type.
To change the settings, use the or button (
Scroll Wheel
) to select the item to change, and use the
or
button to select an option.
See Changing the Settings.
Note
If Manual correction is selected for Photo fix on the Print settings screen, press the right
Function
button to select Advanced, and correct a photo manually.
See
Using Various Functions
.
The settings of the page size, media type, print quality, etc. are retained, and these
settings will appear next time when Photo reprint is selected even if the power is turned
off and on.
(2)
Press the
Color
button to print in color, or the
Black
button to print in black &
white.
The machine starts printing.
Remove the photos on the Platen Glass after printing is completed.
Note
Press the
Stop
button to cancel printing.
You can exit Photo reprint and display the HOME screen, if you press the
HOME
button after
printing is completed.
Page top
Page 41 of 1037 pagesReprinting Printed Photos