Operation Manual

9.
Adjust the print area and crop the area as necessary.
Use the following buttons to crop the area.
,
,
, and
buttons:
Positions the cropping frame.
+
or
-
buttons, or Scroll Wheel:
Sets the cropping frame size.
10.
Use the
OK
button to finalize your selection of cropping area.
The print settings confirmation screen is displayed.
11.
Use the
Color
button to go to the next step.
Note
Do not use the Black
button.
12.
Confirm the message, then set the printable disc.
Use the left Function button to see how to set the printable disc.
13.
Use the
OK
button to start printing.
The machine starts printing.
The photo selection screen is displayed after printing is complete.
Note
Use the
Stop
button to cancel printing.
After printing, allow the printing surface of the disc to dry naturally. Do not use hairdryers or
expose the disc to direct sunlight to dry the ink. Do not touch the printing surface until the ink
has dried.
To keep the print quality at an optimal level, it is recommended to stop printing discs once
every ten discs when printing more than ten discs continuously.
To stop the printing operation, detach the Disc Tray from the printer, then close the Inner Cover.
After approximately three minutes have elapsed, open the Inner Cover, attach the Disc Tray to
the printer, then resume printing.
Page top
Page 439 of 1037 pagesPrinting Photo on the Disc Label