Operation Manual

Advanced Guide
> Maintenance > Cleaning Your Machine
> Cleaning the Inside of the Machine (Bottom Plate Cleaning)
U062
Cleaning the Inside of the Machine (Bottom Plate Cleaning)
This section explains how to clean the inside of the machine. If the inside of the machine becomes dirty,
printed paper may get dirty, so we recommend performing cleaning regularly.
1.
Make sure that the machine is turned on.
2.
Open the Paper Output Tray gently, and open the Output Tray Extension.
3.
Select
Setup on the HOME screen.
Note
For details on how to select a menu on the HOME screen, refer to
Overview of the Machine
.
4.
Select
Maintenance, then press the
OK
button.
The Maintenance screen is displayed.
5.
Use the button to select Bottom plate cleaning, then press the
OK
button.
The confirmation screen is displayed.
6.
Use the
button to select Yes, then press the
OK
button.
7.
Remove any paper from the Rear Tray following the on-screen instructions.
8.
Fold a single sheet of A4 or Letter-sized plain paper in half widthwise, then unfold the
paper following the on-screen instructions.
9.
Load this and only this sheet of paper on the Rear Tray with the open side facing to
the front following the on-screen instructions.
Page 777 of 1037 pagesCleaning the Inside of the Machine (Bottom Plate Cleaning)