Operation Manual

Advanced Guide
Troubleshooting
Contents
>
Routine Maintenance
>
Replacing an Ink Tank
> Checking the Ink Status
C092
Checking the Ink Status
You can check the ink status on the LCD or with the ink lamps.
With the LCD on the Machine
(1)
Make sure that the power is turned on, and press the
HOME
button.
The HOME screen will appear.
(2)
Select Setup
on the HOME screen.
See Selecting Menus on the HOME Screen.
The Setup menu screen will appear.
(3)
Select Display remaining ink level
, and press the
OK
button.
A symbol appears in the area (A) if there is any information about the remaining ink level.
Example:
Ink tank is running low. Prepare a new ink tank.
Note
You can also check the ink status on a screen of the LCD displayed while printing.
With the Ink Lamps
(1)
Make sure that the power is turned on, and open the Paper Output Tray gently.
(2)
Lift the Scanning Unit (Cover) until it stops.
See step 2 in Replacing Procedure
.
(3)
Check the ink lamps.
Close the Scanning Unit (Cover) after confirming the ink lamp status.
See step 6 in Replacing Procedure
.
Ink lamp is on
The ink tank is correctly installed.
Ink lamp is flashing
Page 98 of 1037 pagesChecking the Ink Status