PIXMA MG5500 series Einrichtungshandbuch © CANON INC.
Einrichtungshandbuch Dieses Handbuch enthält Informationen zum Einrichten einer Netzwerkverbindung für den Drucker.
Netzwerkverbindung Drahtlose Verbindung a Vorbereitung der Verbindung Vor dem Einrichten einer drahtlosen Verbindung 1. Der Drucker muss eingeschaltet sein. Wenn die Stromversorgung eingeschaltet ist, leuchtet die (weiße) POWER-Anzeige (A). Hinweise zu drahtlosen Verbindungen • Stellen Sie sicher, dass der Computer mit dem Zugriffspunkt (A) (oder Router für das Drahtlosnetzwerk) verbunden ist, mit dem Sie den Drucker verbinden möchten.
2. Wechseln Sie mit der Taste oder (A) zum Symbol WLAN. 3. Drücken Sie die linke Taste Funktion (Function) (B). 4. Wählen Sie WLAN-Einrichtung (Wireless LAN setup) aus, und drücken Sie dann die Taste OK. Die (blaue) Wi-Fi-Anzeige (C) leuchtet auf, wenn die drahtlose Verbindung aktiviert ist. c Auswahl der Vorgehensweise für die Einrichtung Der Drucker sucht automatisch nach kompatiblen Zugriffspunkten.
d-A Tastendrückmethode d Verbindung über WPS 1. Halten Sie die WPS-Taste am Zugriffspunkt gedrückt. Nähere Informationen zur WPS-Taste finden Sie im Handbuch des Zugriffspunkts. 2. Drücken Sie innerhalb von 2 Minuten die Taste OK am Drucker. Die (blaue) Wi-Fi-Anzeige am Drucker blinkt während der Suche nach einem Zugriffspunkt und während der Verbindungsherstellung. 3. Wenn der links abgebildete Bildschirm angezeigt wird, drücken Sie die Taste OK.
d-B Standardeinrichtung d Verbindung über die Standardeinrichtung 1. Wählen Sie Standardeinrichtung (Standard setup) aus. 2. Drücken Sie die Taste OK. 3. Wählen Sie den Zugriffspunkt aus, und drücken Sie die Taste OK. 4. Einer der nachfolgenden Bildschirme wird auf dem Drucker angezeigt. 5. Drücken Sie die Taste OK. 6. Geben Sie das Netzwerkkennwort (WEP-Schlüssel oder Passphrase) ein. Bei der Zeicheneingabe muss Groß-/Kleinschreibung beachtet werden. 7. Drücken Sie die linke Taste Funktion (Function).
d-C WPS d Verbindung über WPS 1. Wählen Sie WPS aus. 2. Drücken Sie die Taste OK. 3. Wählen Sie Tastendrückmethode (Push button method) aus. 4. Drücken Sie die Taste OK. 5. Drücken Sie die Taste OK. 6. Halten Sie die WPS-Taste am Zugriffspunkt gedrückt. Nähere Informationen zur WPS-Taste finden Sie im Handbuch des Zugriffspunkts. 7. Drücken Sie innerhalb von 2 Minuten die Taste OK am Drucker.
d-D Andere Einrichtung (Erweiterte Einrichtung) d Verbindung über die Erweiterte Einrichtung 1. Wählen Sie Andere Einrichtung (Other setup) aus. 2. Drücken Sie die Taste OK. 3. Wählen Sie Erweiterte Einrichtung (Advanced setup) aus. 4. Drücken Sie die Taste OK. 5. Wählen Sie den Zugriffspunkt aus, und drücken Sie die Taste OK. 6. Wählen Sie das vom Zugriffspunkt verwendete Sicherheitsprotokoll aus, und drücken Sie die Taste OK.
Deaktiviert 7. Wenn der links abgebildete Bildschirm angezeigt wird, drücken Sie die Taste OK. Die Verbindungseinrichtung für das Netzwerk ist jetzt abgeschlossen.
WEP 7. Wählen Sie die WEP-Schlüsselnummer aus, die Sie verwenden möchten. 8. Drücken Sie die Taste OK. 9. Drücken Sie die Taste OK. 10.Geben Sie den WEP-Schlüssel ein. Bei der Zeicheneingabe muss Groß-/Kleinschreibung beachtet werden. 11. Drücken Sie die linke Taste Funktion (Function). 12.Vergewissern Sie sich, dass der WEP-Schlüssel richtig ist. 13.Drücken Sie die linke Taste Funktion (Function). 14.Wenn der links abgebildete Bildschirm angezeigt wird, drücken Sie die Taste OK.
WPA/WPA2 7. Drücken Sie die Taste OK. 8. Geben Sie die Passphrase ein. Bei der Zeicheneingabe muss Groß-/Kleinschreibung beachtet werden. 9. Drücken Sie die linke Taste Funktion (Function). 10.Vergewissern Sie sich, dass die Passphrase richtig ist. 11. Drücken Sie die linke Taste Funktion (Function). 12.Wenn der links abgebildete Bildschirm angezeigt wird, drücken Sie die Taste OK. Die Verbindungseinrichtung für das Netzwerk ist jetzt abgeschlossen.
Zeicheneingabe Sie können die Zeichen eingeben, wenn die Tastatur auf dem Drucker angezeigt wird. Gehen Sie wie nachstehend beschrieben vor. 1. Sie können die Zeichen eingeben, wenn die Tastatur auf der LCD-Anzeige des Druckers angezeigt wird. Bei der Eingabe des Kennworts wird zwischen Groß- und Kleinschreibung unterschieden. Drücken Sie die mittlere Taste Funktion (Function) (A), um zwischen Kleinbuchstaben, Großbuchstaben und numerischen Zeichen zu wechseln. 2.
Fehlersuche Standardeinrichtung Es wird kein Zielzugriffspunkt erkannt • Ist das Netzwerkgerät (Router usw.) eingeschaltet? Falls das Netzwerkgerät bereits eingeschaltet ist, schalten Sie es aus und dann wieder ein. • Überprüfen Sie den Namen des Zugriffspunkts/Netzwerks und das Netzwerkkennwort des Zugriffspunkts oder Routers.
Es gibt mehrere Zugriffspunkte mit demselben Namen. Möchten Sie mehrere Zugriffspunkte verwenden? Die Meldung wird angezeigt, wenn mehrere Zugriffspunkte mit demselben Namen gefunden werden. Wenn Sie nur über einen Zugriffspunkt verfügen: Wählen Sie Nur einen ZugrPkt verw. (Use one AccessPoint only) aus, und drücken Sie die Taste OK. Wählen Sie die MAC-Adresse des gewünschten Zugriffspunkts auf dem angezeigten Bildschirm aus, und drücken Sie die Taste OK.
WEP Herstellen der Verbindung zum Zugriffspunkt fehlgeschlagen. (Failed to connect to the access point.) Vergewissern Sie sich, dass der WEP-Schlüssel, der für den Zugriffspunkt eingegeben wurde, richtig ist. Legen Sie außerdem die Verwendung von WEP-Schlüsselnummer 1 fest, wenn WEP-Schlüsselnummer 2, 3 oder 4 des Zugriffspunkts verwendet wird, oder wählen Sie eine WEP-Schlüsselnummer aus, indem Sie die Einstellungen für die drahtlose Verbindung direkt am Drucker eingeben.
WPA/WPA2 Herstellen der Verbindung zum Zugriffspunkt fehlgeschlagen. (Failed to connect to the access point.) Vergewissern Sie sich, dass die Passphrase, die für den Zugriffspunkt eingegeben wurde, richtig ist. Wenn das Problem nicht behoben werden kann, liegt möglicherweise eine andere Ursache vor.
Um die Standardeinrichtung erneut auszuführen 1. Drücken Sie die Taste HOME (A). 2. Wechseln Sie mit der Taste oder (B) zu WLAN, und drücken Sie dann die linke Taste Funktion (Function) (C). 3. Wählen Sie WLAN-Einrichtung (Wireless LAN setup) aus, und drücken Sie dann die Taste OK.
WPS Verbindung nicht möglich. Es liegen Verbindungsversuche an mehreren Zugriffspunkten gleichzeitig vor. (Cannot connect. Connections are being attempted from multiple access points simultaneously.) Der Bildschirm wird angezeigt, wenn mehrere Zugriffspunkte gleichzeitig versuchen, eine Verbindung herzustellen. Warten Sie einen Moment, und konfigurieren Sie die WPS-Einstellungen dann erneut. Drücken Sie die WPS-Taste nur an einem Zugriffspunkt. Verbindung fehlgeschlagen. (Failed to connect.
Erweiterte Einrichtung Es wird kein Zielzugriffspunkt erkannt • Ist das Netzwerkgerät (Router usw.) eingeschaltet? Falls das Netzwerkgerät bereits eingeschaltet ist, schalten Sie es aus und dann wieder ein. • Überprüfen Sie den Namen des Zugriffspunkts/Netzwerks und das Netzwerkkennwort des Zugriffspunkts oder Routers.
Wenn Sie mehrere Zugriffspunkte verwenden: Wählen Sie Mehrere ZugrPkte verw. (Use multiple AccessPoints) aus, und drücken Sie die Taste OK. Es wird ein unbekannter Zielzugriffspunkt angezeigt Es werden möglicherweise auch in der näheren Umgebung verwendete Zugriffspunkte erkannt. Der Zugriffspunktname wird nicht korrekt angezeigt Zugriffspunktnamen mit Doppelbyte-Zeichen werden zwar nicht richtig angezeigt, können aber ausgewählt werden.
Deaktiviert Herstellen der Verbindung zum Zugriffspunkt fehlgeschlagen. (Failed to connect to the access point.) • Ist das Netzwerkgerät (Router usw.) eingeschaltet? Falls das Netzwerkgerät bereits eingeschaltet ist, schalten Sie es aus und dann wieder ein.
WEP Der WEP-Schlüssel wird nicht automatisch angezeigt Informationen erhalten Sie im Handbuch für den Zugriffspunkt, oder wenden Sie sich an den Hersteller. Herstellen der Verbindung zum Zugriffspunkt fehlgeschlagen. (Failed to connect to the access point.) Vergewissern Sie sich, dass der WEP-Schlüssel, der für den Zugriffspunkt eingegeben wurde, richtig ist.
Das Gerät kann in folgenden Fällen u.U. keine Verbindung zum Netzwerk herstellen: Wenn die DHCP-Funktion des Zugriffspunkts inaktiv ist, aktivieren Sie die DHCP-Funktion, oder geben Sie die IPAdresse (nur IPv4) des Druckers an, und konfigurieren Sie die Einstellungen für die drahtlose Verbindung erneut. Stellen Sie außerdem sicher, dass die ausgewählte WEP-Schlüsselnummer und der eingegebene WEP-Schlüssel richtig sind.
WPA/WPA2 Die Passphrase wird nicht automatisch angezeigt Informationen erhalten Sie im Handbuch für den Zugriffspunkt, oder wenden Sie sich an den Hersteller. Herstellen der Verbindung zum Zugriffspunkt fehlgeschlagen. (Failed to connect to the access point.) Vergewissern Sie sich, dass die Passphrase, die für den Zugriffspunkt eingegeben wurde, richtig ist. Wenn das Problem nicht behoben werden kann, liegt möglicherweise eine andere Ursache vor.
Um die erweiterte Einrichtung erneut auszuführen 1. Drücken Sie die Taste HOME (A). 2. Wechseln Sie mit der Taste oder (B) zu WLAN, und drücken Sie dann die linke Taste Funktion (Function) (C). 3. Wählen Sie WLAN-Einrichtung (Wireless LAN setup) aus, und drücken Sie dann die Taste OK.