Operation Manual

Scanning with WIA Driver
You can scan an item from a WIA (Windows Image Acquisition)-compliant application.
WIA is a driver model implemented in Windows XP or later. It allows you to scan items
without using an application.
The procedure varies depending on the application. The following procedures are examples
only.
Refer to the application's manual for details.
Important
In Windows XP, you cannot scan using the WIA driver via a network connection.
Follow these steps to enable scanning over a network.
The setting may have been completed already depending on your environment.
In that case, Uninstall appears.
1. Follow the procedure below to open Network.
Windows 8: Select the Search charm, then click Network displayed by searching for
"Network".
Windows 7: From the Start menu, select Computer > Network.
Windows Vista: From the Start menu, select Network.
2. Right-click XXX_MAC address (where "XXX" is the model name) in the displayed
screen, then select Install.
Scanning with WIA Driver 2.0
The following is an example of scanning using "Windows Fax and Scan."
1. Place the item on the platen.
Placing Items (When Scanning from a Computer)
2. Select New on the File menu of "Windows Fax and Scan," then click
Scan....
The scan setting screen appears.
Note
If you have more than one scanner or printer, a scanner selection screen may
appear. Double-click the scanner you want to use.
For USB connection: Canon XXX series (where "XXX" is the model name)
For network connection: XXX series_MAC address (where "XXX" is the model
name)
188