MG5500 series Online-Handbuch Fehlersuche Deutsch (German)
Inhalt Fehlersuche. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Probleme mit der Netzwerkverbindung. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Probleme mit dem Gerät bei Verwendung im Netzwerk. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Das Gerät funktioniert plötzlich nicht mehr. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Rückseite des Papiers ist verschmutzt. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53 Im Ausdruck erscheinen vertikale Linien. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54 Farben sind ungleichmäßig oder weisen Streifen auf. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55 Es wird keine Tinte ausgegeben. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Supportcodeliste. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 95 Supportcodeliste (Bei Papierstau). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 97 1300. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 98 1303. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2102. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 137 2103. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 138 2700. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 139 2900. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
940. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 171 6941. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 172 6942. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 173 6943. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Fehlersuche Das Gerät lässt sich nicht einschalten Druckvorgang lässt sich nicht starten Papier wird nicht richtig zugeführt/Fehler "Kein Papier" wird angezeigt Druckergebnisse sind nicht zufrieden stellend Es wird keine Tinte ausgegeben Papierstaus Wenn ein Fehler auftritt Einzelsuchfunktion Probleme mit der Netzwerkverbindung Probleme beim Drucken Probleme mit der Druckqualität Probleme beim Scannen Probleme mit dem Gerät Probleme beim Installieren/Herunterladen Info zu angezeigten Fehlern/Meldungen Wenn
Probleme mit der Netzwerkverbindung Probleme mit dem Gerät bei Verwendung im Netzwerk Es kann kein Gerät im Netzwerk erkannt werden Andere Probleme mit dem Netzwerk 8
Probleme mit dem Gerät bei Verwendung im Netzwerk Das Gerät funktioniert plötzlich nicht mehr Geringe Druckgeschwindigkeit Nach dem Austauschen eines Zugriffspunkts bzw.
Das Gerät funktioniert plötzlich nicht mehr Keine Kommunikation mit Gerät über das Wireless LAN möglich Drucken oder Scannen über einen Computer im Netzwerk nicht möglich Keine Kommunikation mit Gerät über das Wireless LAN möglich Test 1 : Schalten Sie das Gerät erforderlichenfalls ein. : Die Netzwerkeinstellungen des Geräts müssen mit den Einstellungen des Zugriffspunkts übereinstimmen.
Ist dies nicht der Fall, ändern Sie den für den Zugriffspunkt festgelegten Kanal. Test 10 : Stellen Sie sicher, dass die Firewall der Sicherheitssoftware deaktiviert ist. Falls die Firewallfunktion Ihrer Sicherheitssoftware aktiviert ist, erscheint möglicherweise eine Meldung mit dem Hinweis, dass die Canon-Software versucht, auf das Netzwerk zuzugreifen. Wenn die Meldung erscheint, stellen Sie die Sicherheitssoftware so ein, dass sie den Zugriff immer zulässt.
Geringe Druckgeschwindigkeit : Das Gerät druckt oder scannt möglicherweise gerade einen umfangreichen, von einem anderen Computer gestarteten Auftrag. Test 1 : Vergewissern Sie sich, dass die Funkwellenübertragung einwandfrei funktioniert, und passen Sie die Installationspositionen an. Überwachen Sie dabei die Funkwellenübertragung mit dem IJ Network Tool. Test 2 Überwachen des Status des drahtlosen Netzwerks Stellen Sie sicher, dass sich zwischen Zugriffspunkt und Gerät keine Hindernisse befinden.
Nach dem Austauschen eines Zugriffspunkts bzw. dem Ändern der Einstellungen kann das Gerät nicht mehr verwendet werden Wenn Sie einen Zugriffspunkt autauschen, müssen Sie die Netzwerkeinrichtung des Geräts erneut durchführen. Führen Sie die Netzwerkeinrichtung erneut entsprechend den Anweisungen auf unserer Website durch. Wenn das Problem weiterhin besteht, finden Sie unten weitere Informationen.
Keine Möglichkeit zur Kommunikation mit Gerät nach Übernehmen der MAC-/IP-Adressenfilterung oder Eingeben eines WEP-/WPA-/WPA2-Schlüssels für den Zugriffspunkt 14
Es kann kein Gerät im Netzwerk erkannt werden Beim Einrichten der Netzwerkkommunikation wird das Gerät nicht erkannt Das Gerät wurde im Wireless LAN nicht gefunden 15
Beim Einrichten der Netzwerkkommunikation wird das Gerät nicht erkannt Wenn das Gerät beim Einrichten der Netzwerkkommunikation im Netzwerk nicht erkannt wird, überprüfen Sie die Netzwerkeinstellungen, bevor Sie eine erneute Geräteerkennung starten. Bei „Einrichtung von drahtlosem LAN: Test 1“ wird das Gerät nicht erkannt Hinweis • Sie können die Netzwerkkommunikation über USB einrichten.
Bei „Einrichtung von drahtlosem LAN: Test 1“ wird das Gerät nicht erkannt Sind das Gerät und das Netzwerkgerät (Router, Zugriffspunkt usw.) eingeschaltet? Stellen Sie sicher, dass das Gerät eingeschaltet ist. Sicherstellen, dass der Drucker eingeschaltet ist Stellen Sie sicher, dass das Gerät und das Netzwerkgerät (Router, Zugriffspunkt usw.) eingeschaltet sind. Falls das Gerät oder das Netzwerkgerät ausgeschaltet ist: Schalten Sie das Gerät oder das Netzwerkgerät ein.
Bei „Einrichtung von drahtlosem LAN: Test 2“ wird das Gerät nicht erkannt Ist die Einstellung Drahtloses LAN des Geräts aktiviert? Stellen Sie sicher, dass die Wi-Fi-Anzeige des Geräts blau leuchtet. Falls die Wi-Fi-Anzeige aus ist: Die Einstellung Drahtloses LAN des Geräts ist nicht aktiviert. Aktivieren Sie die Einstellung Drahtloses LAN des Geräts.
Bei „Einrichtung von drahtlosem LAN: Test 3“ wird das Gerät nicht erkannt Ist das Gerät mit dem Zugriffspunkt verbunden? Stellen Sie über das Bedienfeld des Geräts sicher, dass das Gerät mit dem Zugriffspunkt verbunden ist. Wählen Sie auf dem Bildschirm HOME die Optionen Einrichtg (Setup), Geräteeinstellungen (Device settings) > LAN-Einstellungen (LAN settings) > LAN-Einstellungen bestätigen (Confirm LAN settings) > Liste d. WLAN-Einstellungen (WLAN setting list).
Bei „Einrichtung von drahtlosem LAN: Test 4“ wird das Gerät nicht erkannt Stimmen die SSID des mit dem Computer verbundenen Zugriffspunkts und des Geräts überein? Sie können die für das Gerät festgelegte SSID auf dem LCD überprüfen. Wählen Sie auf dem Bildschirm HOME die Optionen Einrichtg (Setup), Geräteeinstellungen (Device settings) > LAN-Einstellungen (LAN settings) > LAN-Einstellungen bestätigen (Confirm LAN settings) > Liste d. WLAN-Einstellungen (WLAN setting list).
Bei „Einrichtung von drahtlosem LAN: Test 5“ wird das Gerät nicht erkannt Wird die Einrichtung der Netzwerkkommunikation durch die Firewallfunktion Ihrer Sicherheitssoftware oder Ihres Computerbetriebssystems behindert? Die Kommunikation zwischen dem Gerät und dem Computer kann durch die Firewallfunktion Ihrer Sicherheitssoftware oder Ihres Computerbetriebssystems eingeschränkt werden. Überprüfen Sie die Firewalleinstellung Ihrer Sicherheitssoftware oder Ihres Betriebssystems bzw.
Bei „Einrichtung von drahtlosem LAN: Test 6“ wird das Gerät nicht erkannt Überprüfen Sie die Einstellungen des Zugriffspunkts. Überprüfen Sie die Netzwerkverbindungseinstellungen des Zugriffspunkts, wie IP-Adressenfilterung, MAC-Adressenfilterung oder DHCP-Funktion. Informationen zum Überprüfen der Einstellungen des Zugriffspunkts erhalten Sie in der mit dem Zugriffspunkt gelieferten Bedienungsanleitung oder beim Hersteller des Geräts.
Das Gerät wurde im Wireless LAN nicht gefunden Test 1 : Schalten Sie das Gerät erforderlichenfalls ein. Ist WLAN aktiv/inaktiv (WLAN active/inactive) in LAN-Einstellungen (LAN settings) unter Geräteeinstellungen (Device settings) auf LAN deaktivieren (Disable LAN) gestellt? Test 2 : Wenn das Gerät vorübergehend über ein USB-Kabel mit dem Computer verbunden ist, stellen Sie sicher, dass das USB-Kabel ordnungsgemäß angeschlossen ist.
Test 11 : Stellen Sie sicher, dass die Firewall der Sicherheitssoftware deaktiviert ist. Falls die Firewallfunktion Ihrer Sicherheitssoftware aktiviert ist, erscheint möglicherweise eine Meldung mit dem Hinweis, dass die Canon-Software versucht, auf das Netzwerk zuzugreifen. Wenn die Meldung erscheint, stellen Sie die Sicherheitssoftware so ein, dass sie den Zugriff immer zulässt. Werden Programme verwendet, durch die die Netzwerkumgebung beeinflusst wird, überprüfen Sie deren Einstellungen.
Andere Probleme mit dem Netzwerk Name des Zugriffspunkts, SSID oder Netzwerkschlüssel ist nicht mehr bekannt Während der Einrichtung wird auf dem Bildschirm eine Meldung angezeigt Das Admin-Kennwort für das Gerät wurde vergessen Überprüfen von Netzwerkinformationen Wiederherstellen der Netzwerkeinstellungen des Geräts auf die Herstellerstandards 25
Name des Zugriffspunkts, SSID oder Netzwerkschlüssel ist nicht mehr bekannt Keine Verbindung mit einem Zugriffspunkt möglich, für den ein WEP-/WPA-/WPA2-Schlüssel eingestellt ist (der WEP-/WPA-/WPA2-Schlüssel wurde vergessen) Einstellen eines WEP-/WPA-/WPA2-Schlüssels Keine Verbindung mit einem Zugriffspunkt möglich, für den ein WEP-/WPA-/ WPA2-Schlüssel eingestellt ist (der WEP-/WPA-/WPA2-Schlüssel wurde vergessen) Informationen zum Einrichten des Zugriffspunkts erhalten Sie in der Bedienungsanleitung für
• Voraussetzungen bei Verwendung von WPA oder WPA2 Authentifizierungsmethode, Passphrase und dynamischer Verschlüsselungstyp müssen für Zugriffspunkt, Gerät und Computer übereinstimmen. Geben Sie die für den Zugriffspunkt konfigurierte Passphrase ein (eine Abfolge aus 8 bis 63 alphanumerischen Zeichen oder eine 64 Zeichen umfassende hexadezimale Zahl).
Während der Einrichtung wird auf dem Bildschirm eine Meldung angezeigt Bei der Einrichtung wird der Bildschirm Kennwort eingeben (Enter Password) angezeigt Der Bildschirm für die Einrichtung der Verschlüsselung wird nach Auswahl des Zugriffspunkts im Bildschirm Zugriffspunkte (Access Points) angezeigt Die Meldung „Das Gerät wird mit dem unverschlüsselten drahtlosen Netzwerk verbunden“ wird angezeigt Bei der Einrichtung wird der Bildschirm Kennwort eingeben (Enter Password) angezeigt Der folgende Bildschirm
Das Admin-Kennwort für das Gerät wurde vergessen Initialisieren Sie die LAN-Einstellungen. Wiederherstellen der Netzwerkeinstellungen des Geräts auf die Herstellerstandards Führen Sie nach der Initialisierung der LAN-Einstellungen die Einrichtung entsprechend den Anweisungen auf unserer Website durch.
Überprüfen von Netzwerkinformationen Überprüfen der IP-Adresse oder der MAC-Adresse des Geräts Überprüfen der IP-Adresse oder der MAC-Adresse des Computers Überprüfen der Kommunikationsfähigkeit zwischen Computer und Gerät bzw.
Überprüfen der Kommunikationsfähigkeit zwischen Computer und Gerät bzw. Computer und Zugriffspunkt Wenn Sie überprüfen möchten, ob Kommunikation möglich ist, führen Sie den Pingtest aus. 1. Öffnen Sie den Ordner Dienstprogramme (Utilities) im Ordner Programme (Applications). 2. Starten Sie Netzwerk-Dienstprogramm (Network Utility). 3. Klicken Sie auf die Schaltfläche Ping. 4. Stellen Sie sicher, dass Nur XX Ping-Befehle senden (wobei XX für Ziffern steht) ausgewählt ist. 5.
Wiederherstellen der Netzwerkeinstellungen des Geräts auf die Herstellerstandards Wichtig • Beachten Sie, dass durch die Initialisierung alle Netzwerkeinstellungen am Gerät gelöscht werden und Druck- bzw. Scanvorgänge von einem Computer über das Netzwerk u. U. nicht mehr möglich sind. Um das Gerät über ein Netzwerk zu verwenden, führen Sie die Einrichtung entsprechend den Anweisungen auf unserer Website durch. Initialisieren Sie die Netzwerkeinstellung über das Bedienfeld des Geräts.
Probleme beim Drucken Druckvorgang lässt sich nicht starten Papierstaus Papier wird nicht richtig zugeführt/Fehler "Kein Papier" wird angezeigt Automatischer Duplexdruck wird nicht ordnungsgemäß ausgeführt Kopier-/Druckvorgang wird vorzeitig angehalten 33
Druckvorgang lässt sich nicht starten : Vergewissern Sie sich, dass der Netzstecker richtig angeschlossen ist, und schalten Sie das Gerät dann wieder ein, indem Sie die Taste EIN (ON) drücken. Test 1 Das Gerät wird initialisiert, wenn die Anzeige POWER blinkt. Warten Sie, bis die POWER-Anzeige nicht mehr blinkt, sondern leuchtet. Hinweis • Wenn Sie große Datenmengen wie z. B. Fotos oder Grafiken drucken, wird der Druckauftrag möglicherweise erst mit einiger Verzögerung gestartet.
Papierstaus Bei einem Papierstau wird automatisch eine Meldung zur Fehlersuche ausgegeben. Führen Sie die in der Meldung beschriebenen Schritte aus. • Wenn ein Supportcode und eine Meldung auf dem Computerbildschirm angezeigt werden: * Der Bildschirm variiert je nach verwendetem Betriebssystem. • Wenn ein Supportcode und eine Meldung auf der LCD-Anzeige ausgegeben werden: Informationen zum Entfernen von gestautem Papier finden Sie unter Supportcodeliste (Bei Papierstau).
Papier wird nicht richtig zugeführt/Fehler "Kein Papier" wird angezeigt Test 1 : Stellen Sie sicher, dass Papier eingelegt ist. Einlegen von Papier Test 2 : Achten Sie beim Einlegen von Papier auf die folgenden Punkte. • Wenn Sie zwei oder mehrere Blätter Papier einlegen, achten Sie darauf, den Papierstapel vor dem Einlegen zu lockern. • Wenn Sie zwei oder mehrere Blätter Papier einlegen, achten Sie darauf, dass die Kanten bündig ausgerichtet sind.
Schieben Sie den Einzug zurück, bis die Markierung ausgerichtet ist. am vorderen Fach an der Markierung des Geräts : Stellen Sie sicher, dass die Einstellungen für den Medientyp und das Papierformat mit dem eingelegten Papier übereinstimmen. Test 6 : Falls vom Gerät mehrere Blätter Normalpapier eingezogen werden, wählen Sie die Einstellung zum Verhindern des Doppeleinzugs von Normalpapier aus.
Automatischer Duplexdruck wird nicht ordnungsgemäß ausgeführt Test 1 : Ist die Einstellung für den automatischen Duplexdruck ausgewählt? Stellen Sie sicher, dass im Dialogfeld Drucken das Kontrollkästchen Doppelseitig (Two-Sided) aktiviert ist. Duplexdruck : Stellen Sie sicher, dass sich das Format des eingelegten Papiers für den automatischen Duplexdruck eignet. Test 2 Geeignete Mediengrößen für den automatischen Duplexdruck sind A4 und Letter.
Kopier-/Druckvorgang wird vorzeitig angehalten Test 1 : Ist Papier eingelegt? Stellen Sie sicher, dass Papier eingelegt ist. Legen Sie Papier ein, falls im Gerät keines mehr vorhanden ist. : Sind in den zu druckenden Dokumenten viele Fotos oder Abbildungen enthalten? Test 2 Beim Drucken großer Datenmengen, wie Fotos oder Grafiken, benötigen das Gerät und der Computer unter Umständen mehr Zeit für die Verarbeitung der Daten.
Probleme mit der Druckqualität Druckergebnisse sind nicht zufrieden stellend Es wird keine Tinte ausgegeben 40
Druckergebnisse sind nicht zufrieden stellend Wenn das Druckergebnis aufgrund von weißen Streifen, versetzten Linien oder ungleichmäßiger Farbgebung nicht zufrieden stellend ist, überprüfen Sie zuerst die Einstellungen für Papier und Druckqualität. : Stimmen die Einstellungen für das Seitenformat und den Medientyp mit der Größe und dem Typ des eingelegten Papiers überein? Test 1 Wenn diese Einstellungen nicht richtig sind, kann kein zufrieden stellendes Druckergebnis erzielt werden.
Farben sind ungleichmäßig oder weisen Streifen auf 42
Druckauftrag kann nicht abgeschlossen werden Test : Reicht der Festplattenspeicher des Computers aus? Löschen Sie nicht benötigte Dateien, um mehr Speicherplatz freizugeben.
Keine Druckergebnisse/Unscharfer Druck/Farben sind falsch/ Weiße Streifen Keine Druckergebnisse Unscharfer Druck Farben sind falsch Weiße Streifen 44
Test 1 : Haben Sie die Einstellungen für Papier und Druckqualität überprüft? Druckergebnisse sind nicht zufrieden stellend Test 2 : Überprüfen Sie die Tintenbehälter. Tauschen Sie leere Tintenpatronen aus. Austauschen von Tintenpatronen Test 3 : Wurde das orangefarbene Klebeband bzw. der Schutzfilm entfernt? Prüfen Sie, ob der Schutzfilm vollständig abgezogen wurde und die Y-förmige Lüftungsöffnung frei ist (siehe Abbildung (A)).
Weitere Informationen zum Kopieren finden Sie in den Abschnitten unten: Test 6 : Ist die Auflagefläche verschmutzt? Reinigen Sie die Auflagefläche. Reinigen der Auflagefläche und des Vorlagendeckels Test 7 : Stellen Sie sicher, dass das Dokument korrekt auf der Auflagefläche liegt.
Linien sind schief Test 1 : Haben Sie die Einstellungen für Papier und Druckqualität überprüft? Druckergebnisse sind nicht zufrieden stellend Test 2 : Führen Sie die Druckkopfausrichtung durch. Wenn Linien versetzt gedruckt werden oder der Ausdruck aus anderen Gründen nicht zufrieden stellend ist, muss der Druckkopf ausgerichtet werden. Ausrichten des Druckkopfs Hinweis • Wenn das Problem nach der Druckkopfausrichtung nicht behoben ist, sollten Sie eine manuelle Druckkopfausrichtung durchführen.
Gedrucktes Papier wellt sich, oder Tinte ist verschmiert Auf dem bedruckten Papier ist Tinte verschmiert Das bedruckte Papier wellt sich Test 1 : Haben Sie die Einstellungen für Papier und Druckqualität überprüft? Druckergebnisse sind nicht zufrieden stellend : Falls die Intensität hoch eingestellt ist, verringern Sie die Einstellung für Intensität, und starten Sie einen neuen Druckvorgang.
Papier ist verschmutzt/Bedruckte Oberfläche ist verkratzt Papier ist verschmutzt Die Kanten des Papiers sind verschmutzt Bedruckte Oberfläche ist verschmutzt Bedruckte Oberfläche ist verkratzt Test 1 : Haben Sie die Einstellungen für Papier und Druckqualität überprüft? Druckergebnisse sind nicht zufrieden stellend Test 2 : Wird ein geeigneter Papiertyp verwendet? Prüfen Sie Folgendes: • Überprüfen Sie, ob das verwendete Papier für den Zweck geeignet ist.
1. Rollen Sie das Papier wie unten dargestellt in die der Wellung entgegengesetzte Richtung. 2. Prüfen Sie, ob das Papier nun eben ist. Wir empfehlen, das auf diese Weise geglättete Papier blattweise zu bedrucken. Hinweis • Je nach verwendetem Medientyp wird das Papier möglicherweise verschmutzt, oder es wird möglicherweise nicht richtig eingezogen, auch wenn es nicht nach innen abgeknickt ist.
• So legen Sie Einstellungen über den Computer fest Wählen Sie im Popupmenü des Canon IJ Printer Utility die Option Benutzerdefinierte Einstellungen (Custom Settings) aus, aktivieren Sie das Kontrollkästchen Papierabrieb verhindern (Prevent paper abrasion), und klicken Sie dann auf Übernehmen (Apply). Informationen zum Öffnen des Canon IJ Printer Utility finden Sie unter Öffnen des Canon IJ Printer Utility.
Hinweis • Um eine Verschmutzung des Geräteinnenraums zu vermeiden, stellen Sie das richtige Papierformat ein. Test 10 : Stellen Sie eine längere Dauer für das Trocknen der Druckoberfläche ein. Somit wird ausreichend Zeit für das Trocknen der Druckoberfläche eingeräumt, wodurch ein Verschmieren und Verkratzen des Papiers verhindert wird. 1. Stellen Sie sicher, dass das Gerät eingeschaltet ist. 2. Öffnen Sie das Canon IJ Printer Utility. Öffnen des Canon IJ Printer Utility 3.
Rückseite des Papiers ist verschmutzt Test 1 : Haben Sie die Einstellungen für Papier und Druckqualität überprüft? Druckergebnisse sind nicht zufrieden stellend Test 2 : Führen Sie eine Bodenplattenreinigung durch, um das Innere des Geräts zu reinigen. Reinigen des Geräteinneren (Bodenplattenreinigung) Hinweis • Bei randlosem Druck, Duplexdruck oder übermäßigem Drucken kann der Innenraum des Druckers mit Tinte verschmutzt werden.
Im Ausdruck erscheinen vertikale Linien Test : Haben Sie Papier des richtigen Formats eingelegt? Wenn das Format des eingelegten Papiers größer ist als das festgelegte Format, werden die Ränder möglicherweise mit vertikalen Linien bedruckt. Stellen Sie das richtige Format entsprechend dem Format des eingelegten Papiers ein. Druckergebnisse sind nicht zufrieden stellend Hinweis • Der Verlauf des vertikalen Linienmusters kann je nach Bilddaten oder Druckeinstellung variieren.
Farben sind ungleichmäßig oder weisen Streifen auf Farben sind ungleichmäßig Farben sind streifig Test 1 : Haben Sie die Einstellungen für Papier und Druckqualität überprüft? Druckergebnisse sind nicht zufrieden stellend Test 2 : Drucken Sie das Düsentestmuster und führen Sie sämtliche erforderlichen Wartungsmaßnahmen wie die Druckkopfreinigung durch. Drucken Sie das Düsentestmuster, um zu überprüfen, ob die Tinte von den Druckkopfdüsen ordnungsgemäß ausgegeben wird.
Wenn das Problem nach der Intensivreinigung des Druckkopfs nicht behoben ist, ist der Druckkopf möglicherweise beschädigt. Wenden Sie sich an das Service-Center. Test 3 : Führen Sie die Druckkopfausrichtung durch. Ausrichten des Druckkopfs Hinweis • Wenn das Problem nach der Druckkopfausrichtung nicht behoben ist, sollten Sie eine manuelle Druckkopfausrichtung durchführen. Weitere Informationen finden Sie unter Ausrichten des Druckkopfs über den Computer.
Es wird keine Tinte ausgegeben Test 1 : Ist die Tinte aufgebraucht? Lesen Sie den auf der LCD-Anzeige angezeigten Supportcode und führen Sie die entsprechenden Schritte zur Behebung des Fehlers aus. Supportcodeliste Test 2 : Wurde das orangefarbene Klebeband bzw. der Schutzfilm entfernt? Prüfen Sie, ob der Schutzfilm vollständig abgezogen wurde und die Y-förmige Lüftungsöffnung frei ist (siehe Abbildung (A)). Wenn das orangefarbene Klebeband nicht entfernt wurde (siehe Abbildung (B)), ziehen Sie es ab.
Probleme beim Scannen Probleme beim Scannen Scan-Ergebnisse sind nicht zufrieden stellend 58
Probleme beim Scannen Der Scanner funktioniert nicht Scanner-Treiber startet nicht Eine Fehlermeldung wird angezeigt und der Bildschirm des Scanner-Treibers wird nicht geöffnet Es können nicht mehrere Objekte gleichzeitig gescannt werden Im automatischen Scanmodus kann nicht ordnungsgemäß gescannt werden Niedrige Scan-Geschwindigkeit Die Meldung "Nicht genügend Arbeitsspeicher.
Der Scanner funktioniert nicht Test 1: Stellen Sie sicher, dass der Scanner oder Drucker eingeschaltet ist. Test 2: Schließen Sie das USB-Kabel an einen anderen USBAnschluss am Computer an. Test 3: Wenn das USB-Kabel an einen USB-Hub angeschlossen ist, ziehen Sie es vom USB-Hub ab und verbinden es mit einem USB-Anschluss am Computer. Test 4: Starten Sie den Computer neu.
Scanner-Treiber startet nicht Test 1: Stellen Sie sicher, dass der Scanner-Treiber installiert ist. Falls der Scanner-Treiber noch nicht installiert ist, installieren Sie ihn von der Webseite. Test 2: Wählen Sie Ihren Scanner oder Drucker im Menü der Anwendung aus. Hinweis Je nach Anwendung müssen Sie dazu ggf. andere Schritte ausführen. Test 3: Stellen Sie sicher, dass die Anwendung ICA (Image Capture Architecture) den Treiber unterstützt.
Eine Fehlermeldung wird angezeigt und der Bildschirm des Scanner-Treibers wird nicht geöffnet Test 1: Stellen Sie sicher, dass der Scanner oder Drucker eingeschaltet ist. Test 2: Schalten Sie den Scanner oder Drucker aus, und schließen Sie dann das USB-Kabel und das Netzkabel erneut an. Test 3: Schließen Sie das USB-Kabel an einen anderen USBAnschluss am Computer an.
Es können nicht mehrere Objekte gleichzeitig gescannt werden Test 1: Stellen Sie sicher, dass die Objekte ordnungsgemäß positioniert wurden. Objekte platzieren (beim Scannen über den Computer) Test 2: Überprüfen Sie, ob ein Objekt ordnungsgemäß gescannt wird. Einige Programme bieten keine Unterstützung für das Scannen mehrerer Bilder. Scannen Sie in diesem Fall jedes Dokument einzeln.
Im automatischen Scanmodus kann nicht ordnungsgemäß gescannt werden Test 1: Stellen Sie sicher, dass die Objekte ordnungsgemäß positioniert wurden. Objekte platzieren (beim Scannen über den Computer) Test 2: Möglicherweise wird das Scannen mehrerer Objekte nicht unterstützt. Einige Programme bieten keine Unterstützung für das Scannen mehrerer Bilder. Scannen Sie in diesem Fall jedes Dokument einzeln.
Niedrige Scan-Geschwindigkeit Test 1: Scannen Sie mit einer Ausgabeauflösung von etwa 150 dpi, wenn Sie das Bild auf einem Bildschirm anzeigen möchten. Scannen Sie mit etwa 300 dpi, wenn Sie das Dokument drucken möchten. Auflösung Test 2: Setzen Sie Farbkorrektur (Fading Correction), Bildglättung (Grain Correction) usw. auf Ohne (None). Weitere Informationen finden Sie unter "Bilderkorrekturen und Farbeinstellungen".
Die Meldung "Nicht genügend Arbeitsspeicher." wird angezeigt Test 1: Beenden Sie laufende Anwendungen und versuchen Sie es erneut. Test 2: Reduzieren Sie die Auflösung oder das Ausgabeformat und scannen Sie erneut.
Der Computer hört während des Scannens auf zu arbeiten Test 1: Starten Sie den Computer neu, verringern Sie die Ausgabeauflösung und scannen Sie erneut. Auflösung Test 2: Löschen Sie nicht benötigte Dateien, um auf Ihrer Festplatte freien Platz zu schaffen, und scannen Sie dann erneut.
Das gescannte Bild lässt sich nicht öffnen Test: Wenn das Datenformat von der Anwendung nicht unterstützt wird, scannen Sie das Bild erneut, und wählen Sie ein gängiges Datenformat wie z. B. JPEG beim Speichern aus. Weitere Informationen hierzu finden Sie im Handbuch der Anwendung. Wenden Sie sich bei Fragen an den Hersteller der Anwendung.
Scan-Ergebnisse sind nicht zufrieden stellend Die Scan-Qualität (auf dem Bildschirm angezeigtes Bild) ist schlecht Um das gescannte Bild herum treten unerwünschte weiße Bereiche auf Das Scannen mit der richtigen Größe ist nicht möglich Die Position oder Größe des Bilds wird beim Scannen über das Bedienfeld nicht richtig erkannt Das Objekt wurde richtig platziert, das Bild jedoch schräg gescannt Gescannte Bilder werden auf dem Bildschirm vergrößert (verkleinert) angezeigt 69
Die Scan-Qualität (auf dem Bildschirm angezeigtes Bild) ist schlecht Test 1: Erhöhen Sie die Scanauflösung, wenn das Bild unscharf angezeigt wird. Auflösung Test 2: Stellen Sie die Anzeigegröße auf 100 % ein. Einige Anwendungen zeigen Bilder nicht deutlich an, wenn die Anzeigegröße zu klein sind. Test 3: Wenn ein Moiré-Effekt (Streifenmuster) auftritt, führen Sie folgende Aktionen durch und scannen Sie erneut.
von IJ Scan Utility auf Treiber (Driver) und wählen Sie Staub reduz. (Reduce Dust), Farbkorrektur (Fading Correction), Bildglättung (Grain Correction) usw. aus. Weitere Informationen finden Sie unter "Bilderkorrekturen und Farbeinstellungen". Test 6: Wenn sich der Farbton von Bildern vom Farbton des Originaldokuments unterscheidet, führen Sie folgende Aktionen durch und scannen Sie erneut.
Um das gescannte Bild herum treten unerwünschte weiße Bereiche auf Test: Legen Sie den Scan-Bereich fest. Sie können den Scan-Bereich auch manuell in der Miniaturansicht festlegen, z. B. wenn das Objekt weiße Ränder aufweist (z. B. in Fotos) oder wenn Sie benutzerdefinierte Schnittrahmen erstellen möchten.
Das Scannen mit der richtigen Größe ist nicht möglich Test: Stellen Sie sicher, dass die Objekte ordnungsgemäß positioniert wurden.
Die Position oder Größe des Bilds wird beim Scannen über das Bedienfeld nicht richtig erkannt Test 1: Stellen Sie sicher, dass die Objekte ordnungsgemäß positioniert wurden. Objekte platzieren (beim Scannen über den Computer) Test 2: Vergewissern Sie sich, dass die Einstellungen für das zu scannende Objekt richtig sind. Wenn Sie mit der Einstellung zur automatischen Erkennung des Objekttyps nicht richtig scannen können, legen Sie den Objekttyp und die -größe fest.
Das Objekt wurde richtig platziert, das Bild jedoch schräg gescannt Test: Deaktivieren Sie das Kontrollkästchen Schräge Textdokumente korrigieren (Correct slanted text document), wenn Dokument (Document) oder Zeitschrift (Magazine) als Objekttyp ausgewählt ist, und scannen Sie das Objekt erneut.
Gescannte Bilder werden auf dem Bildschirm vergrößert (verkleinert) angezeigt Test 1: Ändern Sie die Anzeigeeinstellung in der Anwendung. Weitere Informationen hierzu finden Sie im Handbuch der Anwendung. Wenden Sie sich bei Fragen an den Hersteller der Anwendung. Test 2: Klicken Sie im Hauptbildschirm von IJ Scan Utility auf Treiber (Driver), ändern Sie die Auflösungseinstellung und scannen Sie erneut. Je höher die Auflösung, desto größer das angezeigte Bild.
Probleme mit dem Gerät Das Gerät lässt sich nicht einschalten Das Gerät wird unbeabsichtigt ausgeschaltet Verbindung zum Computer kann mit USB-Kabel nicht ordnungsgemäß hergestellt werden Keine Kommunikation mit Gerät über USB-Verbindung möglich LCD-Anzeige ist nicht zu sehen Eine unerwartete Sprache wird auf der LCD-Anzeige angezeigt Druckkopfhalter fährt nicht in die Austauschposition 77
Das Gerät lässt sich nicht einschalten Test 1 : Drücken Sie die Taste EIN (ON). : Vergewissern Sie sich, dass der Netzstecker richtig an den Netzkabelanschluss des Geräts angeschlossen ist, und schalten Sie den Drucker wieder ein. Test 2 : Trennen Sie das Gerät von der Stromversorgung, und schließen Sie das Gerät dann wieder an. Schalten Sie das Gerät erst nach mindestens 3 Minuten wieder ein. Test 3 Wenn das Problem weiterhin besteht, wenden Sie sich an das Service-Center.
Das Gerät wird unbeabsichtigt ausgeschaltet Test : Deaktivieren Sie die Einstellung für das automatische Ausschalten des Geräts. Das Gerät wird nach Ablauf des von Ihnen eingegebenen Zeitraums automatisch ausgeschaltet, wenn Sie die Einstellung zum automatischen Ausschalten aktivieren. Wenn das Gerät nicht automatisch ausgeschaltet werden soll, öffnen Sie Canon IJ Printer Utility, und wählen Sie im Popupmenü die Option Ein/Aus-Einstellungen (Power Settings) aus.
Verbindung zum Computer kann mit USB-Kabel nicht ordnungsgemäß hergestellt werden Geringe Druck- oder Scangeschwindigkeit/Hi-Speed-USB-Verbindung funktioniert nicht Ist die Systemumgebung nicht vollständig mit Hi-Speed USB kompatibel, wird das Gerät mit einer niedrigeren Geschwindigkeit (entsprechend USB 1.1) betrieben. Das Gerät funktioniert in diesem Fall einwandfrei, die Druck- oder Scangeschwindigkeit kann jedoch aufgrund der niedrigeren Verbindungsgeschwindigkeit langsamer sein.
Keine Kommunikation mit Gerät über USB-Verbindung möglich Test 1 : Schalten Sie das Gerät erforderlichenfalls ein. Test 2 : Stellen Sie sicher, dass das USB-Kabel ordnungsgemäß angeschlossen ist. Unter Anschließen des Geräts an den Computer mit einem USB-Kabel finden Sie Informationen zum ordnungsgemäßen Anschluss des USB-Kabels. Test 3 : Starten Sie das IJ Network Tool nicht während eines Druckvorgangs. Test 4 : Drucken Sie nicht, während das IJ Network Tool ausgeführt wird.
LCD-Anzeige ist nicht zu sehen • Wenn die POWER-Anzeige aus ist: Das Gerät ist nicht eingeschaltet. Schließen Sie das Netzkabel an, und drücken Sie die Taste EIN (ON). • Wenn die POWER-Anzeige leuchtet: Möglicherweise befindet sich die LCD-Anzeige im Bildschirmschonermodus. Drücken Sie auf dem Bedienfeld eine beliebige Taste.
Eine unerwartete Sprache wird auf der LCD-Anzeige angezeigt Wählen Sie die gewünschte Sprache folgendermaßen aus. 1. Drücken Sie die Taste HOME und warten Sie ungefähr 5 Sekunden. 2. Wählen Sie Einrichtg (Setup) im Bildschirm HOME. LCD-Anzeige und Bedienfeld 3. Wählen Sie Geräteeinstellungen (Device settings) aus, und drücken Sie dann die Taste OK. 4. Drücken Sie 3 Mal die Taste und dann die Taste OK. 5.
Druckkopfhalter fährt nicht in die Austauschposition Test 1 : Ist die POWER-Anzeige aus? Prüfen Sie, ob die POWER-Anzeige leuchtet. Der Druckkopfhalter bewegt sich nur, wenn der Drucker eingeschaltet ist. Falls die POWER-Anzeige aus ist, schließen Sie das Bedienfeld, und schalten Sie das Gerät ein. Das Gerät wird initialisiert, wenn die Anzeige POWER blinkt. Warten Sie, bis die POWER-Anzeige nicht mehr blinkt, sondern leuchtet, und öffnen Sie dann das Bedienfeld erneut.
Probleme beim Installieren/Herunterladen Die MP Drivers können nicht installiert werden Deinstallieren des IJ Network Tool 85
Die MP Drivers können nicht installiert werden Installieren Sie die MP Drivers neu. Wenn Sie die MP Drivers neu installieren, installieren Sie die MP Drivers von unserer Website.
Deinstallieren des IJ Network Tool Führen Sie die unten angegebenen Schritte aus, um das IJ Network Tool vom Computer zu deinstallieren. Wichtig • Selbst wenn das IJ Network Tool deinstalliert ist, können Sie immer noch mit dem Computer über das Netzwerk drucken und scannen. Sie können über das Netzwerk jedoch nicht die Netzwerkeinstellungen ändern. 1.
Info zu angezeigten Fehlern/Meldungen Wenn ein Fehler auftritt Eine Meldung wird angezeigt 88
Wenn ein Fehler auftritt Wenn beim Drucken ein Fehler auf dem Gerät auftritt, beispielsweise bei fehlendem Papier oder Papierstaus, wird automatisch eine Meldung zur Fehlersuche ausgegeben. Führen Sie die in der Meldung beschriebenen Schritte aus. Beim Auftreten eines Fehlers wird ein Supportcode (Fehlernummer) auf dem Computerbildschirm oder auf der LCD-Anzeige angezeigt.
Eine Meldung wird angezeigt In diesem Abschnitt werden einige Fehler oder Meldungen beschrieben. Hinweis • Bei einigen Fehlern oder Meldungen wird ein Supportcode (Fehlernummer) auf dem Computerbildschirm oder auf der LCD-Anzeige angezeigt. Weitere Informationen zu Fehlern mit Supportcodes finden Sie unter Supportcodeliste. Wenn eine Meldung auf der LCD-Anzeige angezeigt wird, lesen Sie die nachfolgenden Informationen.
Das Symbol "Extended Survey Program für Inkjet-Drucker/Scanner/ Faxgeräte" wird angezeigt Wenn das Extended Survey Program für Inkjet-Drucker/Scanner/Faxgeräte installiert ist, werden die Nutzungsinformationen zu Drucker und Anwendungssoftware jeden Monat über einen Zeitraum von etwa zehn Jahren zum Senden bereitgestellt.
• Wenn Sie nicht an der Umfrage teilnehmen möchten: Klicken Sie auf Nicht akzeptieren (Do not agree). Der Bestätigungsbildschirm wird geschlossen und die Umfrage wird zu diesem Zeitpunkt nicht durchgeführt. Der Bestätigungsbildschirm wird nach einem Monat erneut eingeblendet. • Informationsübermittlung anhalten: Klicken Sie auf Ausschalten (Turn off).
Program) zum Zeitpunkt der nächsten Umfrage am Dock angezeigt. Klicken Sie auf das Symbol und folgen Sie den Bildschirmanweisungen. ◦ Schaltfläche Ausschalten (Turn off)/Einschalten (Turn on): Klicken Sie auf die Schaltfläche Ausschalten (Turn off), um das Extended Survey Program für Inkjet-Drucker/Scanner/Faxgeräte (Inkjet Printer/Scanner/Fax Extended Survey Program) anzuhalten. Klicken Sie auf die Schaltfläche Einschalten (Turn on), um das Inkjet Printer/Scanner/Fax Extended Survey Program neu zu starten.
Wenn das Problem weiterhin besteht Wenn Sie das Problem mit den Hinweisen in diesem Kapitel nicht beheben können, wenden Sie sich an den Händler, bei dem Sie das Gerät gekauft haben, oder an das Service-Center. Die Mitarbeiter des Kundendiensts von Canon sind darin geschult, technischen Support zur Zufriedenheit der Kunden anzubieten. Vorsicht • Wenn das Gerät ungewöhnliche Geräusche oder Gerüche entwickelt oder Rauch entsteht, schalten Sie es sofort aus.
Supportcodeliste (MG5510, MG5520, MG5540, MG5550, MG5560, MG5570, MG5580) Der Supportcode wird auf der LCD-Anzeige und dem Computerbildschirm angezeigt, wenn ein Fehler aufgetreten ist. Der "Supportcode" ist die Fehlernummer. Er wird zusammen mit einer Fehlermeldung angezeigt. Überprüfen Sie bei der Anzeige eines Fehlers den Supportcode, der auf der LCD-Anzeige oder auf dem Computerbildschirm angezeigt wird, und befolgen Sie die entsprechenden Schritte.
• A000 bis ZZZZ B200 C000 Informationen zu Supportcodes bei Papierstau finden Sie auch in der Supportcodeliste (Bei Papierstau).
Supportcodeliste (Bei Papierstau) Falls ein Papierstau aufgetreten ist, entfernen Sie das gestaute Papier entsprechend den folgenden spezifischen Anleitungen.
1300 Ursache Im Papierausgabeschacht ist ein Papierstau aufgetreten. Maßnahme Wenn Sie das gestaute Papier am Papierausgabeschacht sehen können, entfernen Sie es gemäß folgender Anweisung. Hinweis • Falls Sie das Gerät ausschalten müssen, um gestautes Papier während des Druckvorgangs zu entfernen, drücken Sie zum Abbrechen von Druckaufträgen vor dem Ausschalten des Geräts die Taste Stopp (Stop). 1. Ziehen Sie das Papier langsam heraus.
• Wir empfehlen Papier mit einem anderen Format als A5 zum Drucken von Dokumenten mit Fotos oder Grafiken, andernfalls kann sich das Papier bei der Ausgabe wellen und dadurch Papierstaus verursachen. Wenn Sie das Papier nicht entfernen können, das Papier im Gerät reißt oder der Papierstau auch nach dem Entfernen des Papiers nicht behoben ist, wenden Sie sich an das Service-Center.
1303 Ursache Im Gerät ist an der Transporteinheit ein Papierstau aufgetreten. Maßnahme Wenn Sie das Papier nicht im Papierausgabeschacht sehen, entfernen Sie es aus der Transporteinheit. Entfernen Sie das Papier entsprechend den nachstehenden Anweisungen. Hinweis • Falls Sie das Gerät ausschalten müssen, um gestautes Papier während des Druckvorgangs zu entfernen, drücken Sie zum Abbrechen von Druckaufträgen vor dem Ausschalten des Geräts die Taste Stopp (Stop). 1.
Hinweis • Wenn das Papier aufgerollt ist und sich nur schwer herausziehen lässt, fassen Sie das gestaute Papier an den Kanten an, und entfernen Sie es. • Wenn Sie das gestaute Papier nicht über die Transporteinheit entfernen können, schließen Sie die Transporteinheit, bringen Sie das Gerät in die ursprüngliche Position, und entfernen Sie das Papier aus dem Inneren des Geräts. Im Gerät ist ein Papierstau aufgetreten 5. Schließen Sie die Transporteinheit.
1304 Ursache Während des automatischen Duplexdrucks tritt ein Papierstau auf. Maßnahme Wenn der Papierstau während des automatischen Duplexdrucks auftritt, entfernen Sie das Papier entsprechend der folgenden Anleitung. Hinweis • Falls Sie das Gerät ausschalten müssen, um gestautes Papier während des Druckvorgangs zu entfernen, drücken Sie zum Abbrechen von Druckaufträgen vor dem Ausschalten des Geräts die Taste Stopp (Stop). 1. Ziehen Sie das Papier langsam aus dem Papierausgabeschacht heraus.
Stützen Sie das Gerät beim Öffnen der Transporteinheit mit Ihrer Hand ab, damit es nicht umfällt. 6. Ziehen Sie das gestaute Papier langsam heraus. Stützen Sie das Gerät beim Entfernen des gestauten Papiers mit Ihrer Hand ab, damit es nicht umfällt. Hinweis • Wenn das Papier aufgerollt ist und sich nur schwer herausziehen lässt, fassen Sie das gestaute Papier an den Kanten an, und entfernen Sie es.
Hinweis • Stellen Sie das Gerät nach dem Schließen der Transporteinheit sofort wieder in die ursprüngliche Position. 8. Schließen Sie das Gerät wieder an, und schalten Sie das Gerät ein. Alle Druckaufträge in der Warteschlange werden abgebrochen. Starten Sie die Druckaufträge ggf. neu. Wenn Sie das Papier nicht entfernen können, das Papier im Gerät reißt oder der Papierstau auch nach dem Entfernen des Papiers nicht behoben ist, wenden Sie sich an das Service-Center.
Im Gerät ist ein Papierstau aufgetreten Falls das gestaute Papier reißt und es sich weder aus dem Papierausgabeschacht noch aus der Transporteinheit entfernen lässt oder wenn das gestaute Papier im Gerät verbleibt, entfernen Sie es gemäß nachstehender Anleitung. Hinweis • Falls Sie das Gerät ausschalten müssen, um gestautes Papier während des Druckvorgangs zu entfernen, drücken Sie zum Abbrechen von Druckaufträgen vor dem Ausschalten des Geräts die Taste Stopp (Stop). 1.
4. Halten Sie das gestaute Papier mit Ihren Händen fest. Wenn das Papier aufgerollt ist, ziehen Sie es heraus. 5. Ziehen Sie das gestaute Papier langsam heraus, damit es nicht reißt. Halten Sie das Papier beim Ziehen in einem Winkel von etwa 45 Grad. 6. Vergewissern Sie sich, dass das gesamte gestaute Papier entfernt wurde. Falls das Papier gerissen ist, kann es sein, dass noch ein Stück Papier im Gerät ist. Überprüfen Sie Folgendes und entfernen Sie ggf. das Stück Papier.
• Befindet sich das Papierstück auf der rechten oder linken Seite (C) im Gerät? 7. Schließen Sie das Bedienfeld langsam. Alle Druckaufträge in der Warteschlange werden abgebrochen. Starten Sie die Druckaufträge ggf. neu. Hinweis • Prüfen Sie beim erneuten Einlegen von Papier, ob Sie zum Druck geeignetes Papier verwenden, und legen Sie es richtig ein.
In anderen Fällen Achten Sie auf folgende Punkte: Test 1: Befinden sich Fremdkörper in der Nähe des Papierausgabeschachts? Test 2: Ist das Papier gewellt? Legen Sie das Papier nach dem Glätten ein.
1003 Ursache Kein Papier mehr im Gerät oder Papier wird nicht eingezogen. Maßnahme Schließen Sie das Papierausgabefach, ziehen Sie den Einzug heraus, und legen Sie Papier ein. Legen Sie den Papierstapel so ein, dass die Vorderkante des Papiers am hinteren Ende des Einzugs anliegt. Nachdem Sie das Papier eingelegt haben, schieben Sie den Einzug zurück, bis die Markierung vorderen Fach an der Markierung des Geräts ausgerichtet ist.
1200 Ursache Das Bedienfeld ist geöffnet. Maßnahme Schließen Sie das Bedienfeld, und warten Sie einen Moment. Schließen Sie es nicht, während Sie eine Tintenpatrone austauschen.
1250 Ursache Das Papierausgabefach ist geschlossen. Maßnahme Öffnen Sie das Papierausgabefach, um mit dem Drucken fortzufahren.
1310 Ursache Das Papierformat ist mit dem automatischen Duplexdruck möglicherweise nicht kompatibel. Maßnahme Geeignete Mediengrößen für den automatischen Duplexdruck sind A4 und Letter. Stellen Sie sicher, dass das im Gerät eingelegte Papier das richtige Format hat. Durch Drücken der Taste OK wird das Papier ausgeschoben, und der Druckvorgang wird auf der Vorderseite des nächsten Blatts fortgesetzt. Die Rückseite des ausgeschobenen Blatts wird nicht bedruckt.
1401 Ursache Der Druckkopf könnte beschädigt sein. Maßnahme Wenden Sie sich an das Service-Center.
1403 Ursache Der Druckkopf könnte beschädigt sein. Maßnahme Wenden Sie sich an das Service-Center.
1405 Ursache Der Druckkopf könnte beschädigt sein. Maßnahme Wenden Sie sich an das Service-Center.
1410 Ursache Die Tintenpatrone wird nicht erkannt. Maßnahme Öffnen Sie das Bedienfeld, und tauschen Sie die Tintenpatrone, deren Anzeige nicht leuchtet, aus.
1411 Ursache Die Tintenpatrone wird nicht erkannt. Maßnahme Öffnen Sie das Bedienfeld, und tauschen Sie die Tintenpatrone, deren Anzeige nicht leuchtet, aus.
1412 Ursache Die Tintenpatrone wird nicht erkannt. Maßnahme Öffnen Sie das Bedienfeld, und tauschen Sie die Tintenpatrone, deren Anzeige nicht leuchtet, aus.
1413 Ursache Die Tintenpatrone wird nicht erkannt. Maßnahme Öffnen Sie das Bedienfeld, und tauschen Sie die Tintenpatrone, deren Anzeige nicht leuchtet, aus.
1414 Ursache Die Tintenpatrone wird nicht erkannt. Maßnahme Öffnen Sie das Bedienfeld, und tauschen Sie die Tintenpatrone, deren Anzeige nicht leuchtet, aus.
1600 Ursache Leuchtet die Anzeige auf dem Tintenbehälter, ist die Tinte möglicherweise aufgebraucht. Maßnahme Es wird empfohlen, den Tintenbehälter zu ersetzen. Falls ein Druckvorgang läuft und Sie diesen fortsetzen möchten, drücken Sie nach Einsetzen eines Tintenbehälters die Taste OK am Gerät. Dann kann der Druckvorgang fortgesetzt werden. Es wird empfohlen, den Tintenbehälter nach dem Druckvorgang auszutauschen. Das Gerät kann beschädigt werden, wenn weiterhin ohne Tinte gedruckt wird.
1660 Ursache Die Tintenpatrone ist nicht eingesetzt. Maßnahme Setzen Sie die Tintenpatrone ein.
1680 Ursache Einige Tintenbehälter sind nicht an der korrekten Position eingesetzt. (Die Anzeige auf der Tintenpatrone leuchtet.) Maßnahme Vergewissern Sie sich, dass die Tintenbehälter an den richtigen Positionen eingesetzt sind.
1681 Ursache Es sind mehrere Tintenbehälter derselben Farbe eingesetzt. (Die Anzeige auf der Tintenpatrone leuchtet.) Maßnahme Vergewissern Sie sich, dass die Tintenbehälter an den richtigen Positionen eingesetzt sind.
1684 Ursache Die Tintenpatrone wird nicht erkannt. Maßnahme Der Druckvorgang kann nicht ausgeführt werden, da die Tintenpatrone nicht richtig eingesetzt wurde oder mit diesem Gerät nicht kompatibel ist. Setzen Sie den korrekten Tintenbehälter ein. Wenn Sie den Druckvorgang abbrechen möchten, drücken Sie die Taste Stopp (Stop) am Gerät.
1688 Ursache Die Tinte ist aufgebraucht. (Die Anzeige auf dem Tintenbehälter leuchtet.) Maßnahme Tauschen Sie die Tintenpatrone aus und schließen Sie das Bedienfeld. Wenn unter dieser Bedingung gedruckt wird, kann das Gerät beschädigt werden. Falls Sie den Druckvorgang trotzdem fortsetzen möchten, müssen Sie die Funktion zum Ermitteln des Tintenstands deaktivieren. Halten Sie die Taste Stopp (Stop) am Drucker mindestens 5 Sekunden lang gedrückt und lassen Sie sie wieder los.
1689 Ursache Der Drucker hat festgestellt, dass die Tinte aufgebraucht ist (Die Anzeige auf dem Tintenbehälter leuchtet). Maßnahme Tauschen Sie die Tintenpatrone aus und schließen Sie das Bedienfeld. Es wurde ein Tintenbehälter eingesetzt, der schon einmal leer war. Das Gerät kann beschädigt werden, wenn weiterhin ohne Tinte gedruckt wird. Deaktivieren Sie die Funktion zur Erkennung des Tintenstands, um mit dem Drucken fortzufahren.
1700 Ursache Tintenauffangbehälter ist fast voll. Maßnahme Drücken Sie die Taste OK am Gerät, um den Druckvorgang fortzusetzen. Wenden Sie sich an das Service-Center.
1701 Ursache Tintenauffangbehälter ist fast voll. Maßnahme Drücken Sie die Taste OK am Gerät, um den Druckvorgang fortzusetzen. Wenden Sie sich an das Service-Center.
1712 Ursache Tintenauffangbehälter ist fast voll. Maßnahme Drücken Sie die Taste OK am Gerät, um den Druckvorgang fortzusetzen. Wenden Sie sich an das Service-Center.
1713 Ursache Tintenauffangbehälter ist fast voll. Maßnahme Drücken Sie die Taste OK am Gerät, um den Druckvorgang fortzusetzen. Wenden Sie sich an das Service-Center.
1714 Ursache Tintenauffangbehälter ist fast voll. Maßnahme Drücken Sie die Taste OK am Gerät, um den Druckvorgang fortzusetzen. Wenden Sie sich an das Service-Center.
1715 Ursache Tintenauffangbehälter ist fast voll. Maßnahme Drücken Sie die Taste OK am Gerät, um den Druckvorgang fortzusetzen. Wenden Sie sich an das Service-Center.
1890 Ursache Möglicherweise wurde das Schutzmaterial für den Druckkopfhalter oder das Klebeband nicht von der Halterung entfernt. Maßnahme Öffnen Sie das Bedienfeld, und stellen Sie sicher, dass das Schutzmaterial bzw. Klebeband vom Druckkopfhalter entfernt wurde. Wenn das Schutzmaterial oder Klebeband noch angebracht ist, entfernen Sie es, und schließen Sie das Bedienfeld. Wenn das Problem weiterhin besteht, wenden Sie sich an das Service-Center.
2100 Ursache Es wird Papier eingelegt, dessen Größe das Papierformat in den Druckeinstellungen übersteigt. Maßnahme Prüfen Sie die Größe des eingelegten Papiers, und drücken Sie am Gerät auf die Taste OK. Folgender Bildschirm wird auf der LCD-Anzeige angezeigt. Legen Sie soweit nötig erneut Papier ein, und wählen Sie eine Aktion aus. Wichtig • Wenn Mit eingelegtem Papier drucken (Print with the fed paper) ausgewählt ist, erkennt das Gerät beim aktuellen Druckauftrag nicht die Papierbreite.
2101 Ursache Es wird Papier eingelegt, dessen Größe kleiner ist als das Papierformat in den Druckeinstellungen. Maßnahme Prüfen Sie die Größe des eingelegten Papiers, und drücken Sie am Gerät auf die Taste OK. Folgender Bildschirm wird auf der LCD-Anzeige angezeigt. Legen Sie soweit nötig erneut Papier ein, und wählen Sie eine Aktion aus.
2102 Ursache Das Gerät hat erkannt, dass das eingelegte Papier an einer Seite ausgerichtet wurde. Maßnahme Schließen Sie das Papierausgabefach, und ziehen Sie dann den Einzug heraus. Legen Sie das Papier in die Mitte des Einzugs ein, und schieben Sie die Papierführungen so weit nach innen, dass sie auf beiden Seiten am Papierstapel anliegen. Nachdem Sie das Papier eingelegt haben, schieben Sie den Einzug zurück, bis die Markierung vorderen Fach an der Markierung des Geräts ausgerichtet ist.
2103 Ursache Das Gerät kann das Papierformat nicht erkennen. Maßnahme Drücken Sie die Taste Stopp (Stop) des Geräts, um den Fehler zu löschen, und versuchen Sie dann erneut zu drucken. Sollte dieser Fehler selbst nach dem erneuten Drucken weiterhin auftreten, stellen Sie das Gerät über das Bedienfeld, den Druckertreiber oder Remote UI so ein, dass es die Papierbreite nicht erkennt. Hinweis • Je nach Papiertyp erkennt das Gerät die Papierbreite möglicherweise nicht.
2700 Ursache Einige Fehler sind beim Kopieren aufgetreten, und ein bestimmter Zeitraum ist vergangen. Maßnahme Drücken Sie die Taste OK, um den Fehler zu quittieren, und versuchen Sie, den Kopiervorgang erneut auszuführen.
2900 Ursache Die Testseite für die Druckkopfausrichtung konnte nicht gescannt werden. Maßnahme Drücken Sie die Taste OK, um den Fehler zu quittieren, und gehen Sie dann nach den folgenden Anleitungen vor. • Prüfen Sie, ob die Testseite für die Druckkopfausrichtung in der richtigen Position und Ausrichtung auf die Auflagefläche gelegt wurde. • Stellen Sie sicher, dass die Auflagefläche und die Testseite für die Druckkopfausrichtung nicht verschmutzt sind.
4100 Ursache Die angegebenen Daten können nicht gedruckt werden. Maßnahme Wenn Sie den Inhalt von CREATIVE PARK PREMIUM drucken, bestätigen Sie die Meldung auf dem Computerbildschirm, und vergewissern Sie sich, dass für alle Farben Original-Tintenpatronen von Canon richtig eingesetzt sind. Starten Sie den Druckvorgang dann erneut.
4103 Ursache Der automatische Duplexdruck kann mit der aktuellen Papierformateinstellung nicht durchgeführt werden. Maßnahme Drücken Sie am Gerät die Taste Stopp (Stop), um den Druckvorgang abzubrechen. Ändern Sie dann die Papierformateinstellung und drucken Sie erneut.
5011 Ursache Es ist ein Druckerfehler aufgetreten. Maßnahme Schalten Sie das Gerät aus, und ziehen Sie das Netzkabel des Geräts aus der Steckdose. Schließen Sie das Gerät wieder an, und schalten Sie das Gerät ein. Wenn das Problem weiterhin besteht, wenden Sie sich an das Service-Center.
5012 Ursache Es ist ein Druckerfehler aufgetreten. Maßnahme Schalten Sie das Gerät aus, und ziehen Sie das Netzkabel des Geräts aus der Steckdose. Schließen Sie das Gerät wieder an, und schalten Sie das Gerät ein. Wenn das Problem weiterhin besteht, wenden Sie sich an das Service-Center.
5100 Ursache Es ist ein Druckerfehler aufgetreten. Maßnahme Beenden Sie den Druckvorgang, und schalten Sie das Gerät aus. Entfernen Sie dann das gestaute Papier oder das schützende Verpackungsmaterial, das die Bewegung des Druckkopfhalters verhindert. Schalten Sie das Gerät wieder ein. Wenn das Problem weiterhin besteht, wenden Sie sich an das Service-Center.
5200 Ursache Es ist ein Druckerfehler aufgetreten. Maßnahme Schalten Sie das Gerät aus, und ziehen Sie das Netzkabel des Geräts aus der Steckdose. Schließen Sie das Gerät wieder an, und schalten Sie das Gerät ein. Wenn das Problem weiterhin besteht, wenden Sie sich an das Service-Center.
5400 Ursache Es ist ein Druckerfehler aufgetreten. Maßnahme Schalten Sie das Gerät aus, und ziehen Sie das Netzkabel des Geräts aus der Steckdose. Schließen Sie das Gerät wieder an, und schalten Sie das Gerät ein. Wenn das Problem weiterhin besteht, wenden Sie sich an das Service-Center.
5B00 Ursache Es ist ein Druckerfehler aufgetreten. Maßnahme Wenden Sie sich an das Service-Center.
5B01 Ursache Es ist ein Druckerfehler aufgetreten. Maßnahme Wenden Sie sich an das Service-Center.
5B12 Ursache Es ist ein Druckerfehler aufgetreten. Maßnahme Wenden Sie sich an das Service-Center.
5B13 Ursache Es ist ein Druckerfehler aufgetreten. Maßnahme Wenden Sie sich an das Service-Center.
5B14 Ursache Es ist ein Druckerfehler aufgetreten. Maßnahme Wenden Sie sich an das Service-Center.
5B15 Ursache Es ist ein Druckerfehler aufgetreten. Maßnahme Wenden Sie sich an das Service-Center.
6000 Ursache Es ist ein Druckerfehler aufgetreten. Maßnahme Schalten Sie das Gerät aus, und ziehen Sie das Netzkabel des Geräts aus der Steckdose. Schließen Sie das Gerät wieder an, und schalten Sie das Gerät ein. Wenn das Problem weiterhin besteht, wenden Sie sich an das Service-Center.
6500 Ursache Es ist ein Druckerfehler aufgetreten. Maßnahme Schalten Sie das Gerät aus, und ziehen Sie das Netzkabel des Geräts aus der Steckdose. Schließen Sie das Gerät wieder an, und schalten Sie das Gerät ein. Wenn das Problem weiterhin besteht, wenden Sie sich an das Service-Center.
6502 Ursache Es ist ein Druckerfehler aufgetreten. Maßnahme Schalten Sie das Gerät aus, und ziehen Sie das Netzkabel des Geräts aus der Steckdose. Schließen Sie das Gerät wieder an, und schalten Sie das Gerät ein. Wenn das Problem weiterhin besteht, wenden Sie sich an das Service-Center.
6800 Ursache Es ist ein Druckerfehler aufgetreten. Maßnahme Schalten Sie das Gerät aus, und ziehen Sie das Netzkabel des Geräts aus der Steckdose. Schließen Sie das Gerät wieder an, und schalten Sie das Gerät ein. Wenn das Problem weiterhin besteht, wenden Sie sich an das Service-Center.
6801 Ursache Es ist ein Druckerfehler aufgetreten. Maßnahme Schalten Sie das Gerät aus, und ziehen Sie das Netzkabel des Geräts aus der Steckdose. Schließen Sie das Gerät wieder an, und schalten Sie das Gerät ein. Wenn das Problem weiterhin besteht, wenden Sie sich an das Service-Center.
6900 Ursache Es ist ein Druckerfehler aufgetreten. Maßnahme Schalten Sie das Gerät aus, und ziehen Sie das Netzkabel des Geräts aus der Steckdose. Schließen Sie das Gerät wieder an, und schalten Sie das Gerät ein. Wenn das Problem weiterhin besteht, wenden Sie sich an das Service-Center.
6901 Ursache Es ist ein Druckerfehler aufgetreten. Maßnahme Schalten Sie das Gerät aus, und ziehen Sie das Netzkabel des Geräts aus der Steckdose. Schließen Sie das Gerät wieder an, und schalten Sie das Gerät ein. Wenn das Problem weiterhin besteht, wenden Sie sich an das Service-Center.
6902 Ursache Es ist ein Druckerfehler aufgetreten. Maßnahme Schalten Sie das Gerät aus, und ziehen Sie das Netzkabel des Geräts aus der Steckdose. Schließen Sie das Gerät wieder an, und schalten Sie das Gerät ein. Wenn das Problem weiterhin besteht, wenden Sie sich an das Service-Center.
6910 Ursache Es ist ein Druckerfehler aufgetreten. Maßnahme Schalten Sie das Gerät aus, und ziehen Sie das Netzkabel des Geräts aus der Steckdose. Schließen Sie das Gerät wieder an, und schalten Sie das Gerät ein. Wenn das Problem weiterhin besteht, wenden Sie sich an das Service-Center.
6911 Ursache Es ist ein Druckerfehler aufgetreten. Maßnahme Schalten Sie das Gerät aus, und ziehen Sie das Netzkabel des Geräts aus der Steckdose. Schließen Sie das Gerät wieder an, und schalten Sie das Gerät ein. Wenn das Problem weiterhin besteht, wenden Sie sich an das Service-Center.
6930 Ursache Es ist ein Druckerfehler aufgetreten. Maßnahme Schalten Sie das Gerät aus, und ziehen Sie das Netzkabel des Geräts aus der Steckdose. Schließen Sie das Gerät wieder an, und schalten Sie das Gerät ein. Wenn das Problem weiterhin besteht, wenden Sie sich an das Service-Center.
6931 Ursache Es ist ein Druckerfehler aufgetreten. Maßnahme Schalten Sie das Gerät aus, und ziehen Sie das Netzkabel des Geräts aus der Steckdose. Schließen Sie das Gerät wieder an, und schalten Sie das Gerät ein. Wenn das Problem weiterhin besteht, wenden Sie sich an das Service-Center.
6932 Ursache Es ist ein Druckerfehler aufgetreten. Maßnahme Schalten Sie das Gerät aus, und ziehen Sie das Netzkabel des Geräts aus der Steckdose. Schließen Sie das Gerät wieder an, und schalten Sie das Gerät ein. Wenn das Problem weiterhin besteht, wenden Sie sich an das Service-Center.
6933 Ursache Es ist ein Druckerfehler aufgetreten. Maßnahme Schalten Sie das Gerät aus, und ziehen Sie das Netzkabel des Geräts aus der Steckdose. Schließen Sie das Gerät wieder an, und schalten Sie das Gerät ein. Wenn das Problem weiterhin besteht, wenden Sie sich an das Service-Center.
6936 Ursache Es ist ein Druckerfehler aufgetreten. Maßnahme Schalten Sie das Gerät aus, und ziehen Sie das Netzkabel des Geräts aus der Steckdose. Schließen Sie das Gerät wieder an, und schalten Sie das Gerät ein. Wenn das Problem weiterhin besteht, wenden Sie sich an das Service-Center.
6937 Ursache Es ist ein Druckerfehler aufgetreten. Maßnahme Schalten Sie das Gerät aus, und ziehen Sie das Netzkabel des Geräts aus der Steckdose. Schließen Sie das Gerät wieder an, und schalten Sie das Gerät ein. Wenn das Problem weiterhin besteht, wenden Sie sich an das Service-Center.
6938 Ursache Es ist ein Druckerfehler aufgetreten. Maßnahme Schalten Sie das Gerät aus, und ziehen Sie das Netzkabel des Geräts aus der Steckdose. Schließen Sie das Gerät wieder an, und schalten Sie das Gerät ein. Wenn das Problem weiterhin besteht, wenden Sie sich an das Service-Center.
6940 Ursache Es ist ein Druckerfehler aufgetreten. Maßnahme Schalten Sie das Gerät aus, und ziehen Sie das Netzkabel des Geräts aus der Steckdose. Schließen Sie das Gerät wieder an, und schalten Sie das Gerät ein. Wenn das Problem weiterhin besteht, wenden Sie sich an das Service-Center.
6941 Ursache Es ist ein Druckerfehler aufgetreten. Maßnahme Schalten Sie das Gerät aus, und ziehen Sie das Netzkabel des Geräts aus der Steckdose. Schließen Sie das Gerät wieder an, und schalten Sie das Gerät ein. Wenn das Problem weiterhin besteht, wenden Sie sich an das Service-Center.
6942 Ursache Es ist ein Druckerfehler aufgetreten. Maßnahme Schalten Sie das Gerät aus, und ziehen Sie das Netzkabel des Geräts aus der Steckdose. Schließen Sie das Gerät wieder an, und schalten Sie das Gerät ein. Wenn das Problem weiterhin besteht, wenden Sie sich an das Service-Center.
6943 Ursache Es ist ein Druckerfehler aufgetreten. Maßnahme Schalten Sie das Gerät aus, und ziehen Sie das Netzkabel des Geräts aus der Steckdose. Schließen Sie das Gerät wieder an, und schalten Sie das Gerät ein. Wenn das Problem weiterhin besteht, wenden Sie sich an das Service-Center.
6944 Ursache Es ist ein Druckerfehler aufgetreten. Maßnahme Schalten Sie das Gerät aus, und ziehen Sie das Netzkabel des Geräts aus der Steckdose. Schließen Sie das Gerät wieder an, und schalten Sie das Gerät ein. Wenn das Problem weiterhin besteht, wenden Sie sich an das Service-Center.
6945 Ursache Es ist ein Druckerfehler aufgetreten. Maßnahme Schalten Sie das Gerät aus, und ziehen Sie das Netzkabel des Geräts aus der Steckdose. Schließen Sie das Gerät wieder an, und schalten Sie das Gerät ein. Wenn das Problem weiterhin besteht, wenden Sie sich an das Service-Center.
6946 Ursache Es ist ein Druckerfehler aufgetreten. Maßnahme Schalten Sie das Gerät aus, und ziehen Sie das Netzkabel des Geräts aus der Steckdose. Schließen Sie das Gerät wieder an, und schalten Sie das Gerät ein. Wenn das Problem weiterhin besteht, wenden Sie sich an das Service-Center.
B200 Ursache Es ist ein Fehler aufgetreten, der die Kontaktaufnahme mit dem Service-Center erfordert. Maßnahme Schalten Sie das Gerät aus, und ziehen Sie das Netzkabel des Geräts aus der Steckdose. Wenden Sie sich an das Service-Center.
C000 Ursache Es ist ein Druckerfehler aufgetreten. Maßnahme Schalten Sie das Gerät aus, und ziehen Sie das Netzkabel des Geräts aus der Steckdose. Schließen Sie das Gerät wieder an, und schalten Sie das Gerät ein. Wenn das Problem weiterhin besteht, wenden Sie sich an das Service-Center.