Operation Manual

Changing the Machine Settings on the LCD
This section describes the procedure to change the settings in the Device settings screen, taking the steps
to specify Extended copy amount as an example.
1. Make sure that the machine is turned on.
2.
Select Setup on the HOME screen.
LCD and Operation Panel
3.
Select Device settings, then press the OK button.
The Device settings screen is displayed.
4.
Use the button to select the setting item, then press the OK button.
The setting screen for the selected item is displayed.
5.
Use the button to select the menu, then press the OK button.
6. Use the button to select the setting item, then press the OK button.
201