Operation Manual

Align heads manually
Usually, the Print Head Alignment function on the Maintenance tab is set to
automatic head alignment, but you can change it to manual head alignment.
If the printing results are unsatisfactory even after you execute automatic head
alignment, execute manual head alignment.
Check this check box to perform the manual head alignment.
Uncheck this check box to perform the automatic head alignment.
Prevent paper double-feed
Select this check box only if the machine is feeding multiple sheets of plain paper at
the same time.
Important
Using this function slows down the print speed.
Rotate 90 degrees left when orientation is [Landscape]
On the Page Setup tab, you can change the rotation direction of the Landscape in
the Orientation.
To rotate the document 90 degrees to the left when printing, select the check box.
To rotate the document 90 degrees to the right when printing, clear the check box.
Detect the paper width when printing from computer
When you print from the computer, this function identifies the paper that was loaded
into this machine.
When the paper width detected by the machine differ from the width of the paper
specified in Page Size on the Page Setup tab, a message is displayed.
To use paper width detection when printing from the computer, select the check
box.
Important
If you are using user-defined paper, use the Custom Paper Size to correctly
set the size of the paper loaded in the machine.
If an error message is displayed even though the same size that was set is
loaded, clear the check box.
Ink Drying Wait Time
The machine can pause before printing a subsequent page. Moving the slider to the
right increases the pause time, and moving the slider to the left decreases the time.
If the paper gets stained because the next page is ejected before the ink on the
printed page dries, increase the ink drying wait time.
Reducing the ink drying wait time speeds up printing.
149