MG7100 series Příručka online Tisk Kopírování čeština (Czech)
Obsah Tisk. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Tisk z počítače. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Tisk z aplikačního softwaru, který používáte (ovladač tiskárny). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Tisk s využitím snadného nastavení. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Nastavení kontrastu. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 95 Nastavení intenzity/kontrastu pomocí barevných vzorků (ovladač tiskárny). . . . . . . . . . . . . . 97 Přehled ovladače tiskárny. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 102 Ovladač tiskárny Canon IJ. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Použití tisku prostřednictvím webové služby. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 221 Upozornění k tisku prostřednictvím webové služby. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 222 Tisk fotografií z online alba fotografií. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 224 Stažení a tisk formulářů šablon. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Tisk Tisk z počítače Tisk z aplikačního softwaru, který používáte (ovladač tiskárny) Tisk pomocí ovládacího panelu zařízení Tisk fotografických dat Použití funkce prezentace Tisk šablon, například linkovaného papíru nebo papíru pro grafy Tisk dokumentů (souborů PDF) uložených na paměťové kartě Tisk etiket disku Použití tisku prostřednictvím webové služby Upozornění k tisku prostřednictvím webové služby Tisk fotografií z online alba fotografií Stažení a tisk formulářů šablon Nastavení pro webovou službu Tisk
Tisk z počítače Tisk z aplikačního softwaru, který používáte (ovladač tiskárny) 6
Tisk z aplikačního softwaru, který používáte (ovladač tiskárny) Tisk s využitím snadného nastavení Základní Různé metody tisku Změna kvality tisku a úprava obrazových dat Přehled ovladače tiskárny Popis ovladače tiskárny Aktualizace ovladačů MP Drivers 7
Tisk s využitím snadného nastavení Tato část popisuje jednoduchý postup nastavení na kartě Rychlé nastavení, která umožňují tisk vhodný pro toto zařízení. 1. Zkontrolujte, zda je zařízení zapnuté 2. Vložte papír do zařízení 3. Otevřete okno nastavení ovladače tiskárny 4. Vyberte často používaný profil V možnostech Běžně používaná nastavení (Commonly Used Settings) na kartě Rychlé nastavení (Quick Setup) vyberte profil tisku, který je vhodný pro daný účel.
Důležité Dostupnost nastavení kvality tisku, která můžete použít, závisí na profilu tisku. 6. Zkontrolujte zdroj papíru Zkontrolujte, zda je v nabídce Zdroj papíru (Paper Source) vybrána možnost Kazeta (Cassette). Důležité Velikost papíru určuje, zda se použije horní či spodní kazeta. Zvolená kazeta, jež má být použita, se zobrazí v nabídce Zdroj papíru (Paper Source).
7. Dokončete nastavení Klepněte na tlačítko OK. Po spuštění tisku bude dokument vytištěn podle nastavení, které odpovídá danému účelu. Důležité Pokud zaškrtnete políčko Vždy tisknout s aktuálním nastavením (Always Print with Current Settings) budou na kartách Rychlé nastavení (Quick Setup), Hlavní (Main) a Vzhled stránky (Page Setup) uložena všechna zadaná nastavení a příště budete moci opět tisknout podle stejných nastavení. Klepnutím na tlačítko Uložit... (Save...
Nastavení typu média v ovladači tiskárny Nejlepších výsledků při použití tohoto zařízení dosáhnete, pokud vyberete typ média, který nejlépe odpovídá účelu tisku. V zařízení můžete použít následující typy médií. Komerčně dostupné papíry Název média Typ média (Media Type) v ovladači tiskárny Běžný papír (včetně recyklovaného papíru) Běžný papír (Plain Paper) Obálky Obálka (Envelope) Originální papíry Canon (tisk fotografií) Typ média (Media Type) v Název média
Různé metody tisku Nastavení funkcí Velikost stránky a Orientace Nastavení počtu kopií a pořadí tisku Nastavení okraje pro sešití Spuštění tisku bez ohraničení Tisk přizpůsobený velikosti stránky Tisk v měřítku Tisk rozvržené stránky Vedle sebe/Tisk plakátu Tisk brožury Oboustranný tisk Tisk razítka nebo pozadí Registrace razítka Registrace obrazových dat pro použití jako pozadí Nastavení tisku obálek Tisk na média Hagaki Zobrazení výsledků tisku před tiskem Nastavení rozměrů papíru (Uživatelská velikost) Ú
Nastavení funkcí Velikost stránky a Orientace Velikost a orientace stránky jsou přednostně určeny softwarovou aplikací. Pokud jsou v nastavení Velikost stránky (Page Size) a Orientace (Orientation) na kartě Vzhled stránky (Page Setup) hodnoty velikosti a orientace stránky stejné jako hodnoty nastavené v aplikaci, není nutné je vybírat na kartě Vzhled stránky (Page Setup).
Poznámka Je-li v nastavení Rozvržení stránky (Page Layout) vybrána možnost Normální velikost (Normal-size), zobrazí se políčko Automaticky zmenšit velikost dokumentu, který nemůže tiskárna vytisknout (Automatically reduce large document that the printer cannot output). Za normálních okolností můžete políčko Automaticky zmenšit velikost dokumentu, který nemůže tiskárna vytisknout (Automatically reduce large document that the printer cannot output) nechat zaškrtnuté.
Nastavení počtu kopií a pořadí tisku Chcete-li zadat počet kopií a pořadí tisku, postupujte takto: Počet kopií můžete také nastavit na kartě Rychlé nastavení (Quick Setup). 1. Otevřete okno nastavení ovladače tiskárny 2. Zadejte počet kopií, které se mají vytisknout Na kartě Vzhled stránky (Page Setup) v položce Počet kopií (Copies) zadejte počet kopií k vytištění. 3. Zadejte pořadí tisku Pokud chcete začít tisknout od poslední stránky, zaškrtněte políčko Tisk od poslední stránky (Print from Last Page).
• Tisk od poslední stránky (Print from Last Page): /Kompletovat (Collate): • Tisk od poslední stránky (Print from Last Page): /Kompletovat (Collate): • Tisk od poslední stránky (Print from Last Page): /Kompletovat (Collate): 4. Dokončete nastavení Klepněte na tlačítko OK. Po spuštění tisku se vytiskne zadaný počet kopií v zadaném pořadí. Důležité Pokud softwarová aplikace, pomocí které byl dokument vytvořen, obsahuje stejnou funkci, zadejte nastavení v ovladači tiskárny.
kompletována od poslední stránky. Tato nastavení lze použít v kombinaci s nastaveními Normální velikost (Normal-size), Bez ohraničení (Borderless), Přizpůsobené velikosti stránky (Fit-to-Page), V měřítku (Scaled), Rozvržení stránky (Page Layout) a Oboustranný tisk (Duplex Printing).
Nastavení okraje pro sešití Chcete-li nastavit sešívanou stranu a šířku okraje, postupujte takto: 1. Otevřete okno nastavení ovladače tiskárny 2. Zadejte stranu, která má být sešita Zkontrolujte umístění okraje pro sešití na kartě Vzhled stránky (Page Setup) v nastavení Sešívaná strana (Stapling Side). Tiskárna analyzuje nastavení Orientace (Orientation) a Rozvržení stránky (Page Layout) a automaticky vybere nejlepší umístění sponky. Pokud chcete nastavení změnit, vyberte ze seznamu jinou hodnotu. 3.
Poznámka Tiskárna automaticky zmenší oblasti tisku v závislosti na velikosti okraje pro sešití. 4. Dokončete nastavení Na kartě Vzhled stránky (Page Setup) klepněte na tlačítko OK. Při provádění tisku jsou data vytištěna se zadaným nastavením sešívané strany a šířky okraje. Důležité Možnosti Sešívaná strana (Stapling Side) a Zadat okraj... (Specify Margin...
Spuštění tisku bez ohraničení Funkce tisku bez ohraničení zvětší obraz tak, aby mírně přesahoval okraj papíru, a umožňuje tak tisk bez okraje. Při běžném tisku se okolo oblasti dokumentu vytvoří okraje. Při tisku bez ohraničení nebudou tyto okraje vytvořeny. Chcete-li vytisknout data (například fotografii) bez okraje, nastavte tisk bez ohraničení.
Po zobrazení výzvy k potvrzení klepněte na tlačítko OK. Po zobrazení okna s nabídkou změny nastavení typu média vyberte typ média ze seznamu a klepněte na tlačítko OK. 3. Zkontrolujte velikost papíru Zkontrolujte seznam Velikost stránky (Page Size). Pokud jej chcete změnit, vyberte ze seznamu jinou velikost stránky. V seznamu jsou zobrazeny pouze velikosti, které mohou být použity pro tisk bez ohraničení. 4.
Pokud se poměr výšky a šířky liší od rozměrů obrazových dat, potom se na média některých velikostí pravděpodobně nevytiskne část obrazu. V takovém případě v aplikaci ořízněte obrazová data podle velikosti papíru. Poznámka Je-li v nabídce Typ média (Media Type) na kartě Hlavní (Main) vybrána možnost Běžný papír (Plain Paper), nedoporučujeme používat tisk bez ohraničení. Z tohoto důvodu se při výběru médií zobrazí odpovídající zpráva.
Tisk přizpůsobený velikosti stránky Postup tisku automaticky zvětšeného nebo zmenšeného dokumentu tak, aby se přizpůsobil velikosti stránky, je následující: 1. Otevřete okno nastavení ovladače tiskárny 2. Nastavte tisk přizpůsobený velikosti stránky Ze seznamu Rozvržení stránky (Page Layout) na kartě Vzhled stránky (Page Setup) vyberte možnost Přizpůsobené velikosti stránky (Fit-to-Page). 3.
Vyberte velikost papíru vloženého do zařízení ze seznamu Velikost papíru v tiskárně (Printer Paper Size). Pokud je Velikost papíru v tiskárně (Printer Paper Size) menší než Velikost stránky (Page Size), obraz stránky bude zmenšen. Pokud je Velikost papíru v tiskárně (Printer Paper Size) větší než Velikost stránky (Page Size), obraz stránky bude zvětšen. Aktuální nastavení se zobrazí v náhledu nastavení na levé straně okna ovladače tiskárny. 5. Dokončete nastavení Klepněte na tlačítko OK.
Tisk v měřítku Chcete-li vytisknout dokument se zvětšením nebo zmenšením stránek, postupujte následovně: 1. Otevřete okno nastavení ovladače tiskárny 2. Nastavte tisk v měřítku V seznamu Rozvržení stránky (Page Layout) na kartě Vzhled stránky (Page Setup) vyberte možnost V měřítku (Scaled). 3. Vyberte velikost papíru dokumentu Pomocí nastavení Velikost stránky (Page Size) vyberte velikost stránky nastavenou v používané softwarové aplikaci. 4.
• Výběrem hodnoty v poli Velikost papíru v tiskárně (Printer Paper Size) Pokud je velikost papíru v tiskárně menší než Velikost stránky (Page Size), obraz stránky bude zmenšen. Pokud je velikost papíru v tiskárně větší než Velikost stránky (Page Size), obraz stránky bude zvětšen. • Zadejte měřítko Zadejte hodnotu přímo do pole Měřítko (Scaling). Aktuální nastavení se zobrazí v náhledu nastavení na levé straně okna ovladače tiskárny. 5.
Klepněte na tlačítko OK. Po spuštění tisku se dokument vytiskne v zadaném měřítku. Důležité Pokud aplikační software, ve kterém jste vytvořili původní dokument, obsahuje funkci tisku v měřítku, nakonfigurujte nastavení v aplikačním softwaru. Toto nastavení není potřeba konfigurovat i v ovladači tiskárny. Poznámka Volbou možnosti V měřítku (Scaled) změníte tisknutelnou oblast dokumentu.
Tisk rozvržené stránky Funkce tisku rozvržené stránky umožňuje vytisknout obraz více stránek na jeden list papíru. Při tisku rozvržené stránky postupujte takto: 1. Otevřete okno nastavení ovladače tiskárny 2. Nastavte tisk rozvržené stránky Ze seznamu Rozvržení stránky (Page Layout) na kartě Vzhled stránky (Page Setup) vyberte možnost Rozvržení stránky (Page Layout). Aktuální nastavení se zobrazí v náhledu nastavení na levé straně okna ovladače tiskárny. 3.
4. Nastavte počet a pořadí stránek, které mají být vytištěny na jeden list V případě potřeby klepněte na tlačítko Zadat... (Specify...), zadejte následující nastavení v dialogovém okně Tisk rozvržené stránky (Page Layout Printing), a klepněte na tlačítko OK. Stránky (Pages) Pokud chcete změnit počet stránek, které se mají tisknout na jeden list papíru, vyberte v seznamu požadovaný počet stránek.
Vedle sebe/Tisk plakátu Funkce tisku vedle sebe/tisku plakátu umožňuje zvětšit obrazová data, rozdělit je na několik stránek a vytisknout tyto stránky na samostatné listy papíru. Takto vytištěné stránky lze také slepit a získat tiskovinu velkého formátu, např. plakát. Při tisku vedle sebe/tisku plakátu postupujte takto: Nastavení Vedle sebe/Tisk plakátu 1. Otevřete okno nastavení ovladače tiskárny 2.
3. Vyberte požadovanou velikost papíru Vyberte velikost papíru vloženého do zařízení ze seznamu Velikost papíru v tiskárně (Printer Paper Size). Tím je dokončeno nastavení pro rozdělení dokumentu na 2 a provedení tisku vedle sebe/tisku plakátu. 4. Nastavte počet rozdělení obrazu a stránky, které se budou tisknout V případě potřeby klepněte na tlačítko Zadat... (Specify...), v dialogovém okně Vedle sebe/Tisk plakátu (Tiling/Poster Printing) zadejte následující nastavení a klepněte na tlačítko OK.
5. Dokončete nastavení Na kartě Vzhled stránky (Page Setup) klepněte na tlačítko OK. Po spuštění tisku bude dokument rozdělen na několik stránek. Tisk pouze vybraných stránek Pokud během tisku začne docházet nebo zcela dojde inkoust, můžete opakovat tisk pouze určitých stránek následujícím postupem: 1. Nastavte rozsah stránek V náhledu nastavení v levé části karty Vzhled stránky (Page Setup) postupně klepněte na stránky, které se nemají tisknout.
Důležité Protože při tisku vedle sebe/tisku plakátu se dokument zvětší, může se stát, že výsledek tisku bude hrubý.
Tisk brožury Funkce tisku brožury umožňuje tisknout data ve tvaru vhodném pro přeložení. Data se tisknout na obě strany papíru. Tento typ tisku zaručí kompletování stránek ve správném pořadí podle jejich čísel tak, aby mohly být přeloženy a uprostřed sešity. Při tisku brožury postupujte takto: 1. Otevřete okno nastavení ovladače tiskárny 2. Nastavte tisk brožury Ze seznamu Rozvržení stránky (Page Layout) vyberte možnost Brožura (Booklet) na kartě Vzhled stránky (Page Setup).
Klepněte na tlačítko Zadat... (Specify...), v dialogovém okně Tisk brožury (Booklet Printing) určete následující nastavení a klepněte na tlačítko OK. Okraj pro sešití (Margin for stapling) Určete, na které straně má být okraj pro sešití po přeložení brožury. Vložit prázdnou stránku (Insert blank page) Chcete-li ponechat jednu stranu listu prázdnou, zaškrtněte políčko a vyberte stranu, kterou chcete ponechat prázdnou. Okraj (Margin) Zadejte šířku okraje.
Oboustranný tisk Postup pro tisk dat na obě strany papíru: Oboustranný tisk můžete také nastavit v části Další funkce (Additional Features) na kartě Rychlé nastavení (Quick Setup). Postup při automatickém oboustranném tisku Oboustranný tisk můžete použít, aniž byste museli obracet papír. 1. Otevřete okno nastavení ovladače tiskárny 2.
4. Nastavte oblast tisku Při oboustranném tisku je oblast tisku dokumentu o trochu užší než obvykle a může se stát, že se dokument nevejde na stránku. Klepněte na položku Nastavení oblasti tisku... (Print Area Setup...), vyberte jednu z následujících metod zpracování a klepněte na tlačítko OK. Použít tisk normální velikosti (Use normal-size printing) Tisk bez zmenšení stránky. Použít zmenšený tisk (Use reduced printing) Tisk nepatrně zmenšené stránky. 5.
3. Vyberte rozvržení Ze seznamu Rozvržení stránky (Page Layout) vyberte možnosti Normální velikost (Normal-size), Přizpůsobené velikosti stránky (Fit-to-Page), V měřítku (Scaled) nebo Rozvržení stránky (Page Layout). 4. Zadejte stranu, která má být sešita V nabídce Orientace (Orientation) a Rozvržení stránky (Page Layout) se automaticky vybere nejlepší Sešívaná strana (Stapling Side). Pokud chcete nastavení změnit, vyberte ze seznamu jinou sešívanou stranu. 5.
Je-li v seznamu Rozvržení stránky (Page Layout) vybrána možnost Bez ohraničení (Borderless), Vedle sebe/Plakát (Tiling/Poster) nebo Brožura (Booklet), budou možnosti Oboustranný tisk (Duplex Printing) a Sešívaná strana (Stapling Side) zabarveny šedě a nebudou dostupné. Oboustranný tisk (Duplex Printing) lze provádět pouze tehdy, je-li jako Velikost stránky (Page Size) na kartě Vzhled stránky (Page Setup) zvolena jedna z následujících velikostí papíru. • Letter 22x28cm 8.5"x11" (Letter 8.
Tisk razítka nebo pozadí V případě použití některých ovladačů tiskárny nebo provozních prostředí nemusí být funkce Razítko (Stamp) nebo Pozadí (Background) k dispozici. Funkce Razítko (Stamp) umožňuje vytisknout text razítka nebo bitovou mapu přes data dokumentu nebo pod nimi. Můžete rovněž vytisknout datum, čas a uživatelské jméno. Funkce Pozadí (Background) umožňuje vytisknout světlý obrázek pod daty dokumentu.
Poznámka V ovladači tiskárny XPS je místo tlačítka Razítko/Pozadí... (Stamp/ Background...) k dispozici tlačítko Razítko... (Stamp...) a lze použít pouze funkci razítka. 3. Vyberte razítko Zaškrtněte políčko Razítko (Stamp) a v seznamu vyberte razítko, které chcete použít. Aktuální nastavení se zobrazí v náhledu nastavení na levé straně karty Vzhled stránky (Page Setup). 4. Nastavte podrobnosti razítka V případě potřeby zadejte následující nastavení a poté klepněte na tlačítko OK.
Razítko jen na první stránce (Stamp first page only) Zaškrtněte toto políčko, pokud chcete tisknout razítko pouze na první stránce. 5. Dokončete nastavení Na kartě Vzhled stránky (Page Setup) klepněte na tlačítko OK. Po spuštění tisku budou data vytištěna s určeným razítkem. Tisk pozadí Na ukázku jsou připraveny dva soubory bitových map. 1. Otevřete okno nastavení ovladače tiskárny 2. Na kartě Vzhled stránky (Page Setup) klepněte na tlačítko Razítko/ Pozadí... (Stamp/Background...
Poznámka Razítko a pozadí se nevytisknou na prázdné listy vložené pomocí funkce tisku brožury Vložit prázdnou stránku (Insert blank page).
Registrace razítka V případě použití některých ovladačů tiskárny nebo provozních prostředí nemusí být tato funkce k dispozici. Můžete vytvořit a registrovat nové razítko. Můžete rovněž změnit a znovu zaregistrovat některá nastavení existujících razítek. Nepotřebná razítka lze kdykoli odstranit. Při registraci nového razítka postupujte takto: Registrace nového razítka 1. Otevřete okno nastavení ovladače tiskárny 2. Na kartě Vzhled stránky (Page Setup) klepněte na tlačítko Razítko/ Pozadí...
Poznámka V ovladači tiskárny XPS je místo tlačítka Razítko/Pozadí... (Stamp/ Background...) k dispozici tlačítko Razítko... (Stamp...) a lze použít pouze funkci razítka. 3. Klepněte na tlačítko Vlastní razítko... (Define Stamp...) Otevře se dialogové okno Nastavení razítka (Stamp Settings). 4.
uživatelské jméno vytištěného objektu. Podle potřeby změňte nastavení Písmo TrueType (TrueType Font), Styl (Style), Velikost (Size) a Obrys (Outline). Po klepnutí na tlačítko Vybrat barvu... (Select Color...) lze vybrat barvu razítka. Důležité Je-li vybrána možnost Datum/čas/jméno uživatele (Date/Time/User Name), bude pole Text razítka (Stamp Text) zobrazeno šedě. • Karta Umístění (Placement) Vyberte polohu razítka v seznamu Poloha (Position).
V dialogovém okně Razítko/Pozadí (Stamp/Background) (Razítko (Stamp)) zaškrtněte políčko Razítko (Stamp). Následně ze seznamu vyberte název razítka, které chcete změnit. 2. Klepněte na tlačítko Vlastní razítko... (Define Stamp...) Otevře se dialogové okno Nastavení razítka (Stamp Settings). 3. Konfigurujte razítko a zároveň sledujte jeho náhled 4. Uložte razítko s přepsáním Na kartě Uložit nastavení (Save settings) klepněte na tlačítko Uložit s přepsáním (Save overwrite).
Registrace obrazových dat pro použití jako pozadí V případě použití některých ovladačů tiskárny nebo provozních prostředí nemusí být tato funkce k dispozici. Můžete zvolit soubor bitové mapy (.bmp) a zaregistrovat jej jako nové pozadí. Můžete rovněž změnit a zaregistrovat některá nastavení existujících pozadí. Nepotřebná pozadí lze odstranit. Při registraci obrazových dat, která mají být použita jako pozadí, postupujte takto: Registrace nového pozadí 1. Otevřete okno nastavení ovladače tiskárny 2.
Poznámka V ovladači tiskárny XPS je místo tlačítka Razítko/Pozadí... (Stamp/ Background...) k dispozici tlačítko Razítko... (Stamp...) a funkci Pozadí (Background) nelze použít. 3. Klepněte na tlačítko Vybrat pozadí... (Select Background...) Otevře se dialogové okno Nastavení pozadí (Background Settings). 4. Vyberte soubor s obrázkem, který chcete zaregistrovat jako pozadí Klepněte na tlačítko Vybrat soubor... (Select File...). Vyberte cílový rastrový soubor (.bmp) a klepněte na tlačítko Otevřít (Open).
Klepněte na kartu Uložit nastavení (Save settings), zadejte nový název do pole Název (Title) a klepněte na tlačítko Uložit (Save). Po zobrazení výzvy k potvrzení klepněte na tlačítko OK. Poznámka Na začátku a konci názvu nelze zadat mezery, tabulátory ani nové řádky. 7. Dokončete nastavení Po klepnutí na tlačítko OK se znovu otevře dialogové okno Razítko/Pozadí (Stamp/ Background). V seznamu Pozadí (Background) se zobrazí zaregistrovaný název. Změna a registrace některých nastavení pozadí 1.
Odstranění nepotřebného pozadí 1. V dialogovém okně Razítko/Pozadí (Stamp/Background) klepněte na tlačítko Vybrat pozadí... (Select Background...) Otevře se dialogové okno Nastavení pozadí (Background Settings). 2. Vyberte pozadí, které chcete odstranit Vyberte název pozadí, které chcete odstranit, ze seznamu Pozadí (Backgrounds) na kartě Uložit nastavení (Save settings) a klepněte na tlačítko Odstranit (Delete). Po zobrazení výzvy k potvrzení klepněte na tlačítko OK. 3.
Nastavení tisku obálek Používáte-li ovladač tiskárny XPS, při čtení těchto informací nahrazujte odkaz „Monitor stavu Canon IJ“ odkazem „Monitor stavu Canon IJ XPS“. Při tisku obálky postupujte takto: 1. Vložte obálku do zařízení 2. Otevřete okno nastavení ovladače tiskárny 3. Vyberte typ média V části Běžně používaná nastavení (Commonly Used Settings) na kartě Rychlé nastavení (Quick Setup) vyberte možnost Obálka (Envelope). 4.
6. Vyberte požadovanou kvalitu tisku V závislosti na požadované kvalitě vyberte v nastavení Kvalita tisku (Print Quality) možnost Vysoká (High) nebo Standardní (Standard). 7. Dokončete nastavení Klepněte na tlačítko OK. Po spuštění tisku budou data vytištěna na obálku. Důležité Po zahájení tisku obálek jsou zobrazena hlášení Rádce. Chcete-li hlášení Rádce skrýt, zaškrtněte políčko Tuto zprávu příště nezobrazovat (Do not show this message again).
Tisk na média Hagaki Tato část popisuje postup tisku médií Hagaki. 1. Vložte médium Hagaki do zařízení 2. Otevřete okno nastavení ovladače tiskárny 3. Vyberte běžně používaná nastavení Zobrazte kartu Rychlé nastavení (Quick Setup) a v možnosti Běžně používaná nastavení (Commonly Used Settings) vyberte položku Standardní (Standard). 4. Vyberte typ média V možnosti Typ média (Media Type) vyberte položku Hagaki A, Ink Jet Hagaki, Hagaki K nebo Hagaki.
Chcete-li tisknout adresu vodorovně, nastavte možnost Orientace (Orientation) na hodnotu Na šířku (Landscape). 7. Vyberte požadovanou kvalitu tisku V nastavení Kvalita tisku (Print Quality) vyberte možnost Vysoká (High) nebo Standardní (Standard) podle toho, která vám vyhovuje lépe. 8. Dokončete nastavení Klepněte na tlačítko OK. Po spuštění tisku se data vytisknou na médium Hagaki. Důležité Po zahájení tisku na médium Hagaki se zobrazí hlášení Rádce.
Zobrazení výsledků tisku před tiskem Používáte-li ovladač tiskárny XPS, při čtení těchto informací nahrazujte odkaz „Náhled na tiskárnu Canon IJ“ odkazem „Náhled na tiskárnu Canon IJ XPS“. Výsledky tisku můžete zobrazit a zkontrolovat před vytištěním. Chcete-li zobrazit výsledný tisk před tiskem, postupujte takto: Zobrazení výsledků tisku můžete také nastavit na kartě Rychlé nastavení (Quick Setup). 1. Otevřete okno nastavení ovladače tiskárny 2.
Příbuzné téma Náhled tiskárny Canon IJ 57
Nastavení rozměrů papíru (Uživatelská velikost) Pokud nelze vybrat velikost papíru v nastavení Velikost stránky (Page Size), můžete určit výšku a šířku papíru. Taková velikost papíru se nazývá „uživatelská velikost“. Chcete-li zadat uživatelskou velikost papíru, postupujte takto: Uživatelskou velikost papíru můžete také nastavit v části Velikost papíru v tiskárně (Printer Paper Size) na kartě Rychlé nastavení (Quick Setup). 1.
4. Nastavte uživatelskou velikost papíru Vyberte Jednotky (Units) a zadejte velikost používaného papíru do polí Výška (Height) a Šířka (Width). Poté klepněte na tlačítko OK. 5. Dokončete nastavení Na kartě Vzhled stránky (Page Setup) klepněte na tlačítko OK. Po spuštění tisku budou data vytištěna podle zadané velikosti papíru. Důležité V závislosti na velikosti uživatelem vybraného média může být tisk nedostupný.
Úprava tištěného dokumentu nebo přetisk z historie tisku Je-li použit standardní ovladač IJ, není tato funkce k dispozici. V okně Náhled na tiskárnu Canon IJ XPS můžete upravit tištěný dokument nebo načíst historii tisku dokumentů a vytisknout dokument z ní.
Klepnutím na ikonu Zpět (Undo) vrátíte právě provedenou změnu. Úprava a tisk dokumentu k tisku Tisknete-li více dokumentů nebo stránek, můžete sloučit dokumenty, změnit pořadí tisku dokumentů nebo stránek nebo odstranit dokumenty či stránky. 1. Otevřete okno nastavení ovladače tiskárny 2. Nastavte náhled Na kartě Hlavní (Main) zaškrtněte políčko Náhled před tiskem (Preview before printing). 3. Dokončete nastavení Klepněte na tlačítko OK.
Také můžete klepnutím a přetažením tisknutého dokumentu změnit pořadí tisku. • Chcete-li změnit pořadí tištěných stránek, klepněte na položku Zobrazit miniatury (View Thumbnails) v nabídce Možnosti (Option) a vyberte tištěnou stránku, kterou chcete přesunout. Potom v nabídce Upravit (Edit) vyberte možnost Přesunout stránku (Move Page) v části Stránky (Pages) a vyberte příslušnou položku. Také můžete klepnutím a přetažením tisknuté stránky změnit pořadí tisku.
Mají-li slučované dokumenty různé výstupní velikosti papíru a má být proveden oboustranný tisk nebo tisk rozvržení stránky, nemusí tiskárna u některých tištěných stránek vytvořit očekávané výsledky tisku. Před tiskem zkontrolujte náhled. V závislosti na nastavení tisku tištěného dokumentu nemusí být v okně Náhled na tiskárnu Canon IJ XPS k dispozici některé funkce. Poznámka Položku Název dokumentu (Document Name) můžete libovolně přejmenovat. 5. Spuštění tisku Klepněte na tlačítko Tisk (Print).
Změna kvality tisku a úprava obrazových dat Nastavení úrovně ve funkci Kvalita tisku (Uživatelská) Tisk barevného dokumentu monochromaticky Nastavení tónu Nastavení opravy barev Optimální fotografický tisk obrazových dat Nastavení barev v ovladači tiskárny Tisk pomocí profilů ICC Vyhodnocení profilu ICC Nastavení vyvážení barev Nastavení vyvážení barev pomocí barevných vzorků (ovladač tiskárny) Nastavení jasu Nastavení intenzity Nastavení kontrastu Nastavení intenzity/kontrastu pomocí barevných vzorků (ovla
Nastavení úrovně ve funkci Kvalita tisku (Uživatelská) Úroveň kvality tisku lze nastavit v části Uživatelská (Custom). Chcete-li nastavit úroveň kvality tisku, postupujte následovně: 1. Otevřete okno nastavení ovladače tiskárny 2. Vyberte požadovanou kvalitu tisku Na kartě Hlavní (Main) vyberte v nabídce Kvalita tisku (Print Quality) možnost Uživatelská (Custom) a klepněte na tlačítko Nastavit... (Set...). Otevře se dialogové okno Uživatelská (Custom). 3.
Na kartě Hlavní (Main) klepněte na tlačítko OK. Po spuštění tisku budou obrazová data vytištěna s použitím vybrané úrovně kvality tisku. Důležité V závislosti na nastavení Typ média (Media Type) nelze některé úrovně kvality tisku vybrat.
Tisk barevného dokumentu monochromaticky Chcete-li barevný dokument vytisknout monochromaticky (jednobarevně), postupujte takto: Tisk v odstínech šedi můžete také nastavit v části Další funkce (Additional Features) na kartě Rychlé nastavení (Quick Setup). 1. Otevřete okno nastavení ovladače tiskárny 2. Nastavte tisk v odstínech šedi Na kartě Hlavní (Main) zaškrtněte políčko Tisk v odstínech šedi (Grayscale Printing). 3. Dokončete nastavení Klepněte na tlačítko OK.
se mohou barvy skutečně vytištěné lišit od barev původního obrázku. Chcete-li použít funkci tisku v odstínech šedi k vytištění dat ve formátu Adobe RGB, převeďte data pomocí vhodného softwaru do formátu sRGB. Poznámka Při použití funkce Tisk v odstínech šedi (Grayscale Printing) může být kromě černého inkoustu použito i malé množství šedého inkoustu nebo barevných inkoustů.
Nastavení tónu Při tisku černobílých fotografií lze dosahovat chladných efektů studenými barvami a teplých efektů teplými barvami. Je vybrána hodnota Stud. (Cool) Je vybrána hodnota Standardní Je vybrána hodnota Teplý (Warm) Chcete-li upravit nastavení tónu, postupujte takto: 1. Otevřete okno nastavení ovladače tiskárny 2.
V seznamu Barva/Intenzita (Color/Intensity) vyberte možnost Ručně (Manual) a klepněte na tlačítko Nastavit... (Set...). Otevře se dialogové okno Ruční nastavení barev (Manual Color Adjustment). 5. Nastavení monochromatických tónů Posunutím jezdce Tón (Tone) doprava zintenzivníte teplé barvy (teplé tóny), posunutím jezdce doleva zintenzivníte studené barvy (studené tóny). Můžete rovněž ručně zadat hodnotu propojenou s posuvníkem. Zadejte hodnotu v rozmezí od -50 do 50.
Nastavení opravy barev Můžete zadat způsob opravy barev vhodný pro typ dokumentu, který chcete vytisknout. Ovladač tiskárny normálně upravuje barvy prostřednictvím aplikace Canon Digital Photo Color, takže data jsou tištěna pomocí odstínů, kterým dává přednost většina uživatelů. Tato metoda je vhodná pro tisk dat formátu sRGB. Chcete-li tisknout s efektivním použitím barevného prostoru obrazových dat (Adobe RGB nebo sRGB), vyberte možnost ICM (Párování profilu ICC (ICC Profile Matching)).
Klepněte na kartu Soulad (Matching), vyberte nastavení Oprava barev (Color Correction) odpovídající pro daný účel a klepněte na tlačítko OK. Párování ovladače (Driver Matching) Pomocí aplikace Canon Digital Photo Color můžete vytisknout data sRGB pomocí barevných odstínů, kterým dává přednost většina uživatelů. ICM (Párování profilu ICC (ICC Profile Matching)) Během tisku upraví barvy pomocí profilu ICC. Zadejte vstupní profil nebo záměr reprodukce, který chcete použít.
Příbuzná témata Optimální fotografický tisk obrazových dat Nastavení barev v ovladači tiskárny Tisk pomocí profilů ICC Vyhodnocení profilu ICC 73
Optimální fotografický tisk obrazových dat Při tisku obrázků pořízených digitálními fotoaparáty se tóny tištěných barev někdy jeví odlišně od tónů na skutečném obrázku nebo od tónů zobrazených na monitoru. Aby se výsledky tisku co nejvíce přiblížily požadovaným tónům barev, musíte vybrat metodu tisku, která je nejvhodnější pro použitou softwarovou aplikaci nebo pro daný účel. Správa barev Zařízení, jako jsou digitální fotoaparáty, skenery, monitory nebo tiskárny, zpracovávají barvy různými způsoby.
Tisk pomocí profilů ICC Popisuje postup tisku s efektivním použitím barevného prostoru Adobe RGB nebo sRGB. Chcete-li tisknout pomocí společného barevného prostoru, je potřeba softwarovou aplikaci a ovladač tiskárny nastavit tak, aby se správa barev shodovala se vstupním profilem ICC obrazových dat. Postup nastavení ovladače tiskárny se liší v závislosti na aplikačním softwaru, který je používán k tisku.
Nastavení barev v ovladači tiskárny Zadáním funkce opravy barev v ovladači tiskárny můžete tisknout data formátu sRGB s barevnými tóny, které upřednostňuje většina uživatelů používající aplikaci Canon Digital Photo Color. Pokud tisknete pomocí aplikačního softwaru, který dokáže identifikovat profily ICC a umožňuje je určit, použijte tiskový profil ICC v aplikačním softwaru a vyberte nastavení správy barev. Postup pro nastavení barev v ovladači tiskárny: 1. Otevřete okno nastavení ovladače tiskárny 2.
upravte nastavení Jas (Brightness), Intenzita (Intensity) a Kontrast (Contrast) a poté klepněte na tlačítko OK. 5. Dokončete nastavení Na kartě Hlavní (Main) klepněte na tlačítko OK. Během tisku dat bude ovladač tiskárny upravovat barvy.
Tisk pomocí profilů ICC Je-li v obrazových datech určen vstupní profil ICC, můžete efektivně tisknout za využití barevného prostoru dat (Adobe RGB nebo sRGB). Postup pro nastavení ovladače tiskárny se liší v závislosti na aplikačním softwaru, který je používán k tisku.
4. Nastavte ostatní položky V případě potřeby klepněte na kartu Nastavení barev (Color Adjustment) a upravte vyvážení barev (Azurová (Cyan), Purpurová (Magenta), Žlutá (Yellow)). Dále upravte nastavení Jas (Brightness), Intenzita (Intensity) a Kontrast (Contrast) a poté klepněte na tlačítko OK. 5. Dokončete nastavení Na kartě Hlavní (Main) klepněte na tlačítko OK. Po spuštění tisku bude zařízení používat barevný prostor obrazových dat.
Klepněte na kartu Soulad (Matching) a v části Oprava barev (Color Correction) vyberte možnost ICM (Párování profilu ICC (ICC Profile Matching)). 4. Vyberte vstupní profil Vyberte nastavení Vstupní profil (Input Profile), které odpovídá barevnému prostoru obrazových dat. • Pro data formátu sRGB a pro data bez vstupního profilu ICC: Vyberte možnost Standardní (Standard). • Pro data formátu Adobe RGB: Vyberte možnost Adobe RGB (1998).
Tato metoda se při reprodukci obrázků zaměřuje na tóny barev, kterým dáva přednost většina lidí. Tuto metodu vyberte při tisku fotografií. • Relativní kolorimetrický (Relative Colorimetric) Tato metoda při převodu obrazových dat do barevného prostoru tiskárny převádí obrazová data tak, aby reprodukované barvy přibližně odpovídaly sdíleným barevným oblastem. Tuto metodu vyberte v případě, že chcete obrazová data vytisknout tak, aby barvy odpovídaly původním barvám.
Vyhodnocení profilu ICC Pokud je třeba určit profil zařízení, vyberte profil ICC pro papír, na který se bude tisknout. Profily ICC nainstalované pro toto zařízení se zobrazí následujícím způsobem. • (1) je název modelu tiskárny. • (2) je typ média.
Nastavení vyvážení barev Tóny barev je možné upravit při tisku. Protože pomocí této funkce se nastavuje vyvážení barev výstupu změnou koncentrace inkoustu jednotlivých barev, dochází ke změně celkového vyvážení barev dokumentu. Chcete-li provést výraznou změnu vyvážení barev, použijte softwarovou aplikaci. Chcete-li provést pouze drobnou úpravu vyvážení barev, použijte ovladač tiskárny.
Otevře se dialogové okno Ruční nastavení barev (Manual Color Adjustment). 3. Nastavení vyvážení barev Pro nastavení Azurová (Cyan), Purpurová (Magenta) a Žlutá (Yellow) je k dispozici samostatný posuvník. Přesunutím posuvníku doprava dojde k zesílení příslušné barvy, posunutím doleva dojde k zeslabení příslušné barvy. Pokud například zeslabíte azurovou barvu, dojde k zesílení barvy červené. Můžete rovněž ručně zadat hodnotu propojenou s posuvníkem. Zadejte hodnotu v rozmezí od -50 do 50.
Důležité Posuvník nastavujte postupně. 4. Dokončete nastavení Na kartě Hlavní (Main) klepněte na tlačítko OK. Po spuštění tisku bude dokument vytištěn s nastaveným vyvážením barev. Důležité Je-li zaškrtnuto políčko Tisk v odstínech šedi (Grayscale Printing) na kartě Hlavní (Main), vyvážení barev (Azurová (Cyan), Purpurová (Magenta), Žlutá (Yellow)) jsou zobrazena šedě a nejsou k dispozici.
Nastavení vyvážení barev pomocí barevných vzorků (ovladač tiskárny) Nastavení vyvážení barev můžete upravit podle výsledků tisku vzorku. Pokud upravíte vyvážení barev nebo intenzitu/kontrast v dokumentu, funkce tisku vzorku vytiskne výsledky nastavení v podobě seznamu spolu s hodnotami nastavení. Následující postup popisuje postup nastavení vyvážení barev podle vzorku. 1. Otevřete okno nastavení ovladače tiskárny 2.
4. Nastavení tisku vzorku Po otevření dialogového okna Tisk vzorku (Pattern Print) nastavte následující položky a poté klepněte na tlačítko OK. Nastavované parametry (Parameters to Adjust) Vyberte možnosti Azurová/Purpurová/Žlutá (Cyan/Magenta/Yellow). Důležité Je-li zaškrtnuto políčko Tisk v odstínech šedi (Grayscale Printing) na kartě Hlavní (Main), možnosti Azurová/Purpurová/Žlutá (Cyan/Magenta/Yellow) jsou zobrazeny šedě a nejsou k dispozici.
Počet vzorků (Amount of Pattern Instances) Výběrem jedné z možností Největší (Largest), Velký (Large) nebo Malý (Small) nastavte počet vytištěných vzorků. Poznámka Možnosti Největší (Largest) a Velký (Large) nelze vybrat, jsou-li zvoleny určité velikosti papíru nebo výstupní velikosti papíru. Rozdíl barev mezi vzorky (Color Variation Between Instances) Nastavte míru změny barvy mezi sousedními vzorky.
Prohledněte si vytištěný výsledek a vyberte obrázek, který se vám nejvíce líbí. Poté zadejte čísla vyvážení barev vytištěná pod obrázkem do polí Azurová (Cyan), Purpurová (Magenta) a Žlutá (Yellow) na kartě Nastavení barev (Color Adjustment). Zrušte zaškrtnutí políčka Vytisknout vzorek pro nastavení barev (Print a pattern for color adjustment) a klepněte na tlačítko OK.
Vzorek můžete vytisknout pouze v případě, že je v nastavení Rozvržení stránky (Page Layout) na kartě Vzhled stránky (Page Setup) vybrána možnost Normální velikost (Normal-size) nebo Bez ohraničení (Borderless). Je-li na kartě Hlavní (Main) zaškrtnuto políčko Tisk v odstínech šedi (Grayscale Printing), potom se funkce Azurová (Cyan), Purpurová (Magenta) a Žlutá (Yellow) zobrazí šedě a nejsou dostupné. V závislosti na aplikačním softwaru nemusí být tato funkce dostupná.
Nastavení jasu Při tisku můžete změnit jas všech obrazových dat. Tato funkce nemění čistě bílou ani čistě černou barvu, ale mění jas přechodových barev. Na následujícím příkladu je zobrazen výsledek tisku při změně nastavení jasu.
3. Zadejte jas Vyberte pro nastavení Jas (Brightness) možnost Světlý (Light), Normální (Normal) nebo Tmavý (Dark) a klepněte na tlačítko OK. Aktuální nastavení se zobrazí v náhledu nastavení na levé straně okna ovladače tiskárny. 4. Dokončete nastavení Na kartě Hlavní (Main) klepněte na tlačítko OK. Po spuštění tisku budou data vytištěna s použitím zadané hodnoty jasu.
Nastavení intenzity Během tisku můžete zředit (zesvětlit) nebo zintenzívnit (ztmavit) barvy všech obrázkových dat. Na následujícím příkladu je zobrazen případ, kdy je zvýšením intenzity při tisku obrazových dat dosaženo zintenzívnění všech barev.
3. Nastavte intenzitu Posunutím jezdce Intenzita (Intensity) doprava barvy zintenzivníte (ztmavíte) a posunutím jezdce doleva barvy zředíte (zesvětlíte). Můžete rovněž ručně zadat hodnotu propojenou s posuvníkem. Zadejte hodnotu v rozmezí od -50 do 50. Aktuální nastavení se zobrazí v náhledu nastavení na levé straně okna ovladače tiskárny. Po nastavení všech barev klepněte na tlačítko OK. Důležité Posuvník nastavujte postupně. 4. Dokončete nastavení Na kartě Hlavní (Main) klepněte na tlačítko OK.
Nastavení kontrastu Je možné upravit kontrast obrázku během tisku. Chcete-li zvýraznit rozdíly mezi světlými a tmavými částmi obrázku, zvyšte kontrast. Chcete-li naopak rozdíly mezi světlými a tmavými částmi obrázku snížit, kontrast snižte.
3. Nastavení kontrastu Posunutím posuvníku Kontrast (Contrast) doprava se kontrast zvýší, posunutím doleva se kontrast sníží. Můžete rovněž ručně zadat hodnotu propojenou s posuvníkem. Zadejte hodnotu v rozmezí od -50 do 50. Aktuální nastavení se zobrazí v náhledu nastavení na levé straně okna ovladače tiskárny. Po nastavení všech barev klepněte na tlačítko OK. Důležité Posuvník nastavujte postupně. 4. Dokončete nastavení Na kartě Hlavní (Main) klepněte na tlačítko OK.
Nastavení intenzity/kontrastu pomocí barevných vzorků (ovladač tiskárny) Nastavení intenzity a kontrastu můžete upravit podle výsledků tisku vzorku. Pokud upravíte vyvážení barev nebo intenzitu/kontrast v dokumentu, funkce tisku vzorku vytiskne výsledky nastavení v podobě seznamu spolu s hodnotami nastavení. Následující postup popisuje postup nastavení intenzity a kontrastu podle vzorku. 1. Otevřete okno nastavení ovladače tiskárny 2.
4. Nastavení tisku vzorku Po otevření dialogového okna Tisk vzorku (Pattern Print) nastavte následující položky a poté klepněte na tlačítko OK. Nastavované parametry (Parameters to Adjust) Vyberte možnost Intenzita/Kontrast (Intensity/Contrast). Velikost papíru v tiskárně (Printer Paper Size) Vyberte velikost papíru pro tisk vzorku. Poznámka V závislosti na velikosti papíru vybrané na kartě Vzhled stránky (Page Setup) nemusí být některé velikosti papíru k dispozici.
Poznámka Možnosti Největší (Largest) a Velký (Large) nelze vybrat, jsou-li zvoleny určité velikosti papíru nebo výstupní velikosti papíru. Rozdíl barev mezi vzorky (Color Variation Between Instances) Nastavte míru změny barvy mezi sousedními vzorky. Poznámka Možnost Velký (Large) představuje přibližně dvojnásobek možnosti Střední (Medium), možnost Malý (Small) pak přibližně polovinu možnosti Střední (Medium). 5.
Poznámka Hodnoty intenzity a kontrastu můžete nastavit také na kartě Rychlé nastavení (Quick Setup) po klepnutí na tlačítko Tisk fotografií (Photo Printing) v části Běžně používaná nastavení (Commonly Used Settings) a zvolení možnosti Ruční úprava Barva/Intenzita (Color/Intensity Manual Adjustment) v části Další funkce (Additional Features). 7. Dokončete nastavení Na kartě Hlavní (Main) klepněte na tlačítko OK.
Příbuzná témata Nastavení vyvážení barev Nastavení vyvážení barev pomocí barevných vzorků (ovladač tiskárny) Nastavení intenzity Nastavení kontrastu 101
Přehled ovladače tiskárny Ovladač tiskárny Canon IJ Otevření okna nastavení ovladače tiskárny Monitor stavu Canon IJ Kontrola stavu inkoustu z počítače Náhled tiskárny Canon IJ Odstranění nepotřebné tiskové úlohy Pokyny k používání (ovladač tiskárny) 102
Ovladač tiskárny Canon IJ Ovladač tiskárny Canon IJ (dále označovaný jako ovladač tiskárny) je software, který je nainstalovaný v počítači a umožňuje tisk dat pomocí tohoto zařízení. Ovladač tiskárny převádí tisková data vytvořená softwarovou aplikací na data, která umí tiskárna zpracovat, a odesílá takto převedená data do tiskárny. Protože různé modely podporují různé formáty tiskových dat, potřebujete speciální verzi ovladače tiskárny pro každý z modelů.
Příbuzné téma Otevření okna nastavení ovladače tiskárny 104
Otevření okna nastavení ovladače tiskárny Okno nastavení ovladače tiskárny lze otevřít z používané aplikace nebo pomocí ikony tiskárny. Otevření okna ovladače tiskárny v aplikaci Podle níže uvedeného postupu nakonfigurujete před tiskem profil tisku. 1. V aplikačním softwaru vyberte příkaz, který slouží k tisku Obvykle pomocí příkazu Tisk (Print) v nabídce Soubor (File) otevřete dialogové okno Tisk (Print). 2.
• Používáte-li systém Windows XP, klepněte postupně na položky start -> Ovládací panely (Control Panel) -> Tiskárny a jiný hardware (Printers and Other Hardware) -> Tiskárny a faxy (Printers and Faxes). 2. Klepněte pravým tlačítkem na ikonu s názvem modelu a poté v zobrazené nabídce vyberte možnost Předvolby tisku (Printing preferences) Zobrazí se okno nastavení ovladače tiskárny.
Monitor stavu Canon IJ Používáte-li ovladač tiskárny XPS, při čtení těchto informací nahrazujte odkaz „Monitor stavu Canon IJ“ odkazem „Monitor stavu Canon IJ XPS“. Monitor stavu Canon IJ je softwarová aplikace, která zobrazuje stav zařízení a průběh tisku. Stav zařízení je oznamován pomocí obrázků, ikon a zpráv. Spuštění aplikace Monitor stavu Canon IJ Aplikace Monitor stavu Canon IJ se spouští automaticky po odeslání tiskových dat do zařízení.
V takovém případě proveďte příslušnou akci podle uvedeného postupu.
Kontrola stavu inkoustu z počítače Používáte-li ovladač tiskárny XPS, při čtení těchto informací nahrazujte odkaz „Monitor stavu Canon IJ“ odkazem „Monitor stavu Canon IJ XPS“. Podle potřeby můžete zkontrolovat zbývající hladinu inkoustu a typy nádržky s inkoustem vašeho modelu. 1. Otevřete okno nastavení ovladače tiskárny 2. Spuštění aplikace Monitor stavu Canon IJ Na kartě Údržba (Maintenance) klepněte na tlačítko Zobrazit stav tiskárny (View Printer Status).
Náhled tiskárny Canon IJ Náhled tiskárny Canon IJ je aplikace, která ještě před tiskem zobrazí, jak bude vypadat výsledný tisk. Náhled vychází z informací, které jsou nastaveny v ovladači tiskárny a umožňuje zkontrolovat rozvržení dokumentu, pořadí tisku a počet stránek. Můžete také změnit nastavení typu média. Pokud chcete před tiskem zobrazit náhled, otevřete okno nastavení ovladače tiskárny, klepněte na kartu Hlavní (Main) a zaškrtněte políčko Náhled před tiskem (Preview before printing).
Odstranění nepotřebné tiskové úlohy Používáte-li ovladač tiskárny XPS, při čtení těchto informací nahrazujte odkaz „Monitor stavu Canon IJ“ odkazem „Monitor stavu Canon IJ XPS“. Pokud tiskárna nezačne tisknout, pravděpodobně v ní zůstala data zrušené nebo neúspěšné tiskové úlohy. Odstraňte nepotřebné tiskové úlohy pomocí aplikace Monitor stavu Canon IJ. 1. Zobrazení okna Monitor stavu Canon IJ Na hlavním panelu klepněte na tlačítko monitoru stavu. Zobrazí se okno aplikace Monitor stavu Canon IJ. 2.
Pokyny k používání (ovladač tiskárny) Na tento ovladač tiskárny se vztahují následující omezení. Při používání ovladače tiskárny mějte na paměti následující body. Omezení ovladače tiskárny • Při použití některých aplikací nemusí být na kartě Vzhled stránky (Page Setup) v ovladači tiskárny dostupné nastavení Počet kopií (Copies). V takovém případě použijte nastavení počtu kopií v dialogovém okně Tisk (Print) softwarové aplikace.
• V některých aplikacích je tisk rozdělen do několika tiskových úloh. Chcete-li tisk zrušit, odstraňte všechny dílčí tiskové úlohy. • Pokud se obrazová data nevytiskla správně, zobrazte na kartě Vzhled stránky (Page Setup) dialogové okno Možnosti tisku (Print Options) a změňte nastavení Vypnout ICM - vyžadováno aplikací (Disable ICM required from the application software). Tím se může problém vyřešit.
4. Zavřete dialogové okno Tisk (Print), aniž byste zahájili tisk. 5. Otevřete znovu dialogové okno Tisk (Print) aplikace Word. 6. Znovu otevřete dialogové okno nastavení ovladače tiskárny a klepněte na tlačítko OK. 7. Spusťte tisk. • Je-li v aplikaci Adobe Illustrator (Adobe Systems Incorporated) povolena funkce tisku bitové mapy, může tisk trvat delší dobu nebo nemusí být vytištěna některá data.
Popis ovladače tiskárny Popis karty Rychlé nastavení Popis karty Hlavní Popis karty Vzhled stránky Popis karty Údržba Popis aplikace Náhled na tiskárnu Canon IJ Popis aplikace Náhled na tiskárnu Canon IJ XPS Popis dialogového okna Monitor stavu Canon IJ 115
Popis karty Rychlé nastavení Karta Rychlé nastavení (Quick Setup) slouží k registraci běžně používaných nastavení tisku. Pokud vyberete zaregistrované nastavení, zařízení se automaticky přepne na přednastavené položky. Běžně používaná nastavení (Commonly Used Settings) Jsou zaregistrovány názvy a ikony často používaných profilů tisku. Pokud vyberete profil tisku podle účelu použití dokumentu, použijí se nastavení odpovídající tomuto účelu.
Obchodní dokument (Business Document) Toto nastavení vyberte při tisku obecného dokumentu. Pokud položky Velikost stránky (Page Size), Orientace (Orientation) a Počet kopií (Copies) nastavíte v aplikaci, mají tato nastavení přednost. Úspora papíru (Paper Saving) Toto nastavení vyberte, chcete-li při tisku obecného dokumentu šetřit papír. Políčka Tisk 2-na-1 (2-on-1 Printing) a Oboustranný tisk (Duplex Printing) se zaškrtnou automaticky.
Možnosti... (Options...) Otevře Dialogové okno Uložit běžně používaná nastavení (Save Commonly Used Settings). Změní podrobnosti profilu tisku, který má být uložen. Dialogové okno Uložit běžně používaná nastavení (Save Commonly Used Settings) Vyberte, aby tyto ikony profilu tisku byly registrovány v seznamu Běžně používaná nastavení (Commonly Used Settings), a změňte položky, které mají být uloženy v profilech tisku. Ikona (Icon) Vyberte ikonu profilu tisku, který chcete uložit.
(Copies). Tiskárna místo toho tiskne s nastavením kopií zadaným pomocí aplikace. Odstranit (Delete) Odstraní zaregistrovaný profil tisku. V seznamu Běžně používaná nastavení (Commonly Used Settings) vyberte název nastavení, které chcete odstranit, a klepněte na tlačítko Odstranit (Delete). Když se zobrazí žádost o potvrzení, klepnutím na tlačítko OK zadaný profil tisku odstraňte. Poznámka Profily tisku registrované v počátečním nastavení nelze odstranit.
okno Tisk rozvržené stránky (Page Layout Printing) můžete upřesnit nastavení Pořadí stránek (Page Order). Tisk 4-na-1 (4-on-1 Printing) Vytiskne čtyři stránky příslušného dokumentu vedle sebe na jeden list papíru. Chcete-li změnit posloupnost stránek, klepněte na kartu Vzhled stránky (Page Setup), pro položku Rozvržení stránky (Page Layout) vyberte možnost Rozvržení stránky (Page Layout) a klepněte na tlačítko Zadat... (Specify...).
Typ média (Media Type) Vybere typ papíru pro tisk. Vyberte typ média odpovídající papíru vloženému do tiskárny. Tím zaručíte náležitý tisk na konkrétní papír. Velikost papíru v tiskárně (Printer Paper Size) Vybere velikost papíru právě vloženého do zařízení. Velikost papíru se za normálních podmínek nastavuje automaticky podle nastavení výstupní velikosti papíru a dokument je vytištěn bez změny měřítka.
o 90 stupňů doleva. Zrušte zaškrtnutí políčka Otočit o 90 stupňů vlevo při orientaci [Na šířku] (Rotate 90 degrees left when orientation is [Landscape]), chcete-li během tisku otočit dokument o 90 stupňů doprava. Kvalita tisku (Print Quality) Vybere požadovanou kvalitu tisku. Pomocí jedné z následujících položek nastavte úroveň kvality tisku, která odpovídá zamýšlenému účelu.
(Page Setup) budou uloženy a tisk pomocí stejných nastavení bude možný počínaje dalším zpracováním tisku. Důležité Pokud se přihlásíte pomocí jiného uživatelského jména, nastavení nastavená v době, kdy byla tato funkce aktivní, nebudou v nastavení tisku zohledněna. Pokud je zadáno nějaké nastavení v aplikaci, má přednost. Výchozí (Defaults) Obnoví všechna změněná nastavení na výchozí hodnoty.
Popis karty Hlavní Karta Hlavní (Main) umožňuje vytvořit základní nastavení tisku s ohledem na typ média. Pokud není požadován speciální tisk, lze pomocí nastavení položek na této kartě provést normální tisk. Náhled nastavení Obrázek papíru zobrazuje, jak bude originál umístěn na list papíru. Můžete zkontrolovat celkový obraz rozvržení. Na obrázku zařízení je zobrazen postup vložení papíru tak, aby odpovídal nastavení v ovladači tiskárny.
Kvalita tisku (Print Quality) Vybere požadovanou kvalitu tisku. Pomocí jedné z následujících položek nastavte úroveň kvality tisku, která odpovídá zamýšlenému účelu. Vysoká (High) Upřednostní kvalitu tisku před rychlostí. Standardní (Standard) Tiskne průměrnou rychlostí v průměrné kvalitě. Koncept (Draft) Toto nastavení je vhodné pro zkušební tisk. Uživatelský (Custom) Tuto možnost vyberte, pokud chcete nastavit kvalitu tisku samostatně. Položka Nastavit... (Set...
Automaticky (Auto) Hodnoty Azurová (Cyan), Purpurová (Magenta), Žlutá (Yellow), Jas (Brightness), Intenzita (Intensity) a Kontrast (Contrast) apod. se nastaví automaticky. Ručně (Manual) Vyberte, pokud nastavíte metodu Oprava barev (Color Correction) a jednotlivá nastavení jako Azurová (Cyan), Purpurová (Magenta), Žlutá (Yellow), Tón (Tone), Jas (Brightness), Intenzita (Intensity) a Kontrast (Contrast) apod. Položka Nastavit... (Set...
Zobrazit barevný vzorek (View Color Pattern) Zobrazí vzorek pro kontrolu změn barev způsobených nastavením barev. Toto políčko zaškrtněte, pokud chcete náhled obrázku zobrazit s barevným vzorkem. Zaškrtnutí tohoto políčka zrušte, pokud chcete náhled obrázku zobrazit s typem vzorku. Poznámka Pokud zaškrtnete políčko Tisk v odstínech šedi (Grayscale Printing), bude grafika vytištěna monochromaticky.
Můžete rovněž ručně zadat hodnotu propojenou s posuvníkem. Zadejte hodnotu v rozmezí od -50 do 50. Kontrast (Contrast) V obrázku, který chcete vytisknout, upraví kontrast mezi světlou a tmavou. Posunutím posuvníku doprava se kontrast zvýší, posunutím doleva se kontrast sníží. Můžete rovněž ručně zadat hodnotu propojenou s posuvníkem. Zadejte hodnotu v rozmezí od -50 do 50.
Důležité Je-li zaškrtnuto políčko Tisk v odstínech šedi (Grayscale Printing) na kartě Hlavní (Main), možnost Azurová/Purpurová/ Žlutá (Cyan/Magenta/Yellow) je zobrazena šedě a není k dispozici. Velikost papíru v tiskárně (Printer Paper Size) Vybere velikost papíru pro tisk vzorku. Toto nastavení je propojeno s položkou Velikost papíru v tiskárně (Printer Paper Size) na kartě Vzhled stránky (Page Setup).
Hodnota Velký (Large) způsobí velký počet změn, hodnota Malý (Small) způsobí malý počet změn. Poznámka Možnost Velký (Large) představuje přibližně dvojnásobek možnosti Střední (Medium), možnost Malý (Small) pak přibližně polovinu možnosti Střední (Medium). Karta Soulad (Matching) Umožňuje vybrat metodu úpravy barev vhodnou pro typ dokumentu, který chcete vytisknout.
Důležité Pokud v počítači není nainstalován žádný vstupní profil Adobe RGB, možnost Adobe RGB (1998) se nezobrazí. Poznámka V ovladači tiskárny XPS se položka ICM změnila na Párování profilu ICC (ICC Profile Matching). Záměr reprodukce (Rendering Intent) Určuje požadovanou metodu, kterou chcete použít, když vyberete hodnotu ICM (Párování profilu ICC (ICC Profile Matching)) položky Oprava barev (Color Correction).
Je-li zaškrtnuto políčko Tisk v odstínech šedi (Grayscale Printing) na kartě Hlavní (Main), možnost Oprava barev (Color Correction) je zobrazena šedě a není k dispozici. Tisk v odstínech šedi (Grayscale Printing) Tato funkce převede při tisku dokumentu data na monochromatická. Chcete-li vytisknout barevný dokument monochromaticky, zaškrtněte toto políčko. Chcete-li vytisknout barevný dokument barevně, zrušte zaškrtnutí tohoto políčka.
Zobrazení výsledků tisku před tiskem 133
Popis karty Vzhled stránky Karta Vzhled stránky (Page Setup) umožňuje určit, jak bude dokument uspořádán na papíru. Na této kartě lze také nastavit počet kopií a pořadí tisku. Pokud aplikace, ve které jste vytvořili dokument, obsahuje podobnou funkci, proveďte tato nastavení v aplikaci. Náhled nastavení Obrázek papíru zobrazuje, jak bude originál umístěn na list papíru. Můžete zkontrolovat celkový obraz rozvržení.
Orientace (Orientation) Vybere orientaci tisku. Pokud aplikace použitá k vytvoření dokumentu obsahuje podobnou funkci, vyberte stejnou orientaci, jakou jste vybrali v této aplikaci. Na výšku (Portrait) Vytiskne dokument tak, že jeho horní a dolní hrana jsou v souladu se směrem podávání papíru. Toto je výchozí nastavení. Na šířku (Landscape) Vytiskne dokument otočený o 90 stupňů oproti směru podávání papíru.
Normální velikost (Normal-size) Jedná se o běžnou metodu tisku. Vyberte ji, pokud nezadáváte žádné rozvržení stránky. Automaticky zmenšit velikost dokumentu, který nemůže tiskárna vytisknout (Automatically reduce large document that the printer cannot output) Pokud tiskárna nemůže vytisknout velikost papíru dokumentu, zařízení může automaticky snížit velikost dokumentu při tisku. Zaškrtněte toto políčko, pokud chcete snížit velikost dokumentu při tisku.
Zadat... (Specify...) Otevře dialogové okno Tisk rozvržené stránky (Page Layout Printing). Klepnutím na toto tlačítko zobrazte podrobnosti tisku rozvržené stránky. Dialogové okno Tisk rozvržené stránky (Page Layout Printing) Toto dialogové okno umožňuje vybrat počet stránek dokumentu, které mají být umístěny na jeden list papíru, pořadí stránek a zda má být kolem každé stránky dokumentu vytištěno ohraničení stránky.
Nastavení zadaná v tomto dialogovém okně lze potvrdit v náhledu nastavení v ovladači tiskárny. Ikona Náhled Zobrazí nastavení dialogového okna Vedle sebe/Tisk plakátu (Tiling/ Poster Printing). Můžete zkontrolovat výsledek tisku. Rozdělení obrazu (Image Divisions) Zadejte počet částí (svislé x vodorovné). Se zvyšujícím se počtem rozdělení roste i počet listů použitých k tisku. Pokud následně slepíte stránky dohromady, abyste vytvořili plakát, vyšší počet rozdělení vám umožní vytvořit větší plakát.
Brožura (Booklet) Tisk brožury je užitečná funkce pro vytvoření brožury. Data se tisknou na obě strany listu papíru. Tento typ tisku zaručí kompletování stránek ve správném pořadí podle jejich čísel tak, aby mohly být přeloženy a uprostřed sešity. Klepnutím na tlačítko Zadat... (Specify...) zobrazte Dialogové okno Tisk brožury (Booklet Printing) a určete způsob přeložení. Zadat... (Specify...) Otevře dialogové okno Tisk brožury (Booklet Printing).
Oboustranný tisk (Duplex Printing) Určuje, zda má být dokument vytištěn automaticky z obou stran, nebo z jedné strany listu papíru. Pokud chcete tisknout dokument z obou stran, zaškrtněte toto políčko. Pokud chcete tisknout dokument pouze z jedné strany, zrušte zaškrtnutí tohoto políčka.
zaškrtněte políčko Sešívaná strana (Stapling Side) a výběrem možnosti ze seznamu změňte polohu. V Dialogové okno Zadat okraj (Specify Margin), které se zobrazí po klepnutí na položku Zadat okraj... (Specify Margin...), můžete určit šířku okraje pro sešití. Zadat okraj... (Specify Margin...) Otevře dialogové okno Zadat okraj (Specify Margin). Můžete zadat šířku okraje. Dialogové okno Zadat okraj (Specify Margin) Toto dialogové okno umožňuje určit šířku okraje strany, která má být sešita.
Důležité Pokud softwarová aplikace, pomocí které byl dokument vytvořen, obsahuje stejnou funkci, upřednostňujte nastavení ovladače tiskárny. Pokud však nejsou výsledky tisku uspokojivé, použijte nastavení funkce v softwarové aplikaci. Pokud počet kopií a pořadí tisku určíte v aplikaci i v ovladači tiskárny, může být výsledný počet kopií násobkem hodnot obou nastavení nebo může být zakázáno určené pořadí tisku. Možnosti tisku... (Print Options...) Otevře Dialogové okno Možnosti tisku (Print Options).
Důležité I když je toto políčko zaškrtnuto, jsou deaktivovány pouze některé informace v barevném profilu a tento profil lze stále použít pro tisk. Za běžných podmínek zrušte zaškrtnutí tohoto políčka. Zrušit seskupení papírů (Ungroup Papers) Nastaví metodu zobrazení položek Typ média (Media Type), Velikost stránky (Page Size) a Velikost papíru v tiskárně (Printer Paper Size). Chcete-li zobrazit položky odděleně, zaškrtněte toto políčko.
Důležité Za běžných podmínek zrušte zaškrtnutí tohoto políčka. Poznámka Možnost Přizpůsobit obrázky podle interpolace s nejbližším okolím (Scale images using nearest-neighbor interpolation) lze použít pouze s ovladačem tiskárny XPS. Prevence ztráty tiskových dat (Prevention of Print Data Loss) Velikost tištěných dat vytvořených pomocí aplikace lze snížit a data potom vytisknout. V závislosti na použité aplikaci mohou být obrazová data odříznuta nebo nemusí být vytištěna správně.
V závislosti na používaném typu ovladače tiskárny a prostředí nemusí být funkce Razítko (Stamp) a Pozadí (Background) dostupné. Dialogové okno Razítko/Pozadí (Stamp/Background) (Razítko... (Stamp...)) Dialogové okno Razítko/Pozadí (Stamp/Background) (Razítko... (Stamp...)) umožňuje vytisknout razítko nebo pozadí přes stránky dokumentu nebo pod nimi. Kromě připravených razítek a pozadí můžete registrovat a používat i svá původní. Poznámka V ovladači tiskárny XPS je místo tlačítka Razítko/Pozadí...
Je-li možnost Typ razítka (Stamp Type) nastavena na hodnotu Text nebo Datum/čas/jméno uživatele (Date/Time/User Name) Text razítka (Stamp Text) Určuje textový řetězec razítka. Zadat můžete až 64 znaků. Pokud jste vybrali možnost Datum/čas/jméno uživatele (Date/Time/User Name), zobrazí se v části Text razítka (Stamp Text) datum a čas vytvoření a uživatelské jméno vytištěného objektu.
Vybrat soubor... (Select File...) Otevře dialogové okno otevření souboru. Klepnutím na toto tlačítko vyberte soubor bitové mapy, který chcete použít jako razítko. Velikost (Size) Upraví velikost souboru bitové mapy pro razítko. Posunutím posuvníku doprava se velikost zvýší, posunutím doleva se velikost sníží. Průhledná bílá oblast (Transparent white area) Určuje, zda mají být oblasti bitové mapy vyplněné bílou barvou nastaveny jako průhledné.
Poznámka Položka Orientace (Orientation) je aktivní, pouze pokud je v položce Typ razítka (Stamp Type) na kartě Razítko (Stamp) vybrána možnost Text nebo Datum/čas/jméno uživatele (Date/Time/User Name). Poznámka Klepnutím na položku Výchozí (Defaults) nastavte polohu razítka na možnost Na střed (Center) a orientaci na hodnotu 0. Karta Uložit nastavení (Save settings) Karta Uložit nastavení (Save settings) umožňuje registrovat nové razítko nebo odstranit nepotřebné razítko.
Poznámka V částech, kde se razítko a data dokumentu překrývají, se vytiskne přednostně razítko, protože razítko se tiskne přes data dokumentu. Pokud políčko nezaškrtnete, vytiskne se razítko za data dokumentu a v závislosti na použité aplikaci se může stát, že v překrývajících se částech bude část razítka skrytá. Tisk poloprůhledného razítka (Print semitransparent stamp) Nastaví způsob vytištění razítka přes dokument. Chcete-li tuto možnost aktivovat, zaškrtněte políčko Razítko (Stamp).
Karta Pozadí (Background) Karta Pozadí umožňuje vybrat soubor bitové mapy (.bmp), který má být použit jako pozadí, nebo určit způsob tisku vybraného pozadí. Okno Náhled Zobrazí stav bitové mapy nastavené na kartě Pozadí (Background). Soubor (File) Určuje název souboru bitové mapy, který bude použit jako pozadí. Vybrat soubor... (Select File...) Otevře dialogové okno otevření souboru. Klepnutím na toto tlačítko vyberte soubor bitové mapy (.bmp), který chcete použít jako pozadí.
Poznámka Na začátku a konci názvu nelze zadat mezery, tabulátory ani nové řádky. Pozadí (Backgrounds) Zobrazí seznam názvů registrovaných pozadí. Do pole Název (Title) zadejte název, který bude zobrazen u odpovídajícího pozadí. Uložit (Save)/Uložit s přepsáním (Save overwrite) Uloží obrazová data jako pozadí. Po vyplnění pole Název (Title) klepněte na toto tlačítko. Odstranit (Delete) Odstraní nepotřebné pozadí. V seznamu Pozadí (Backgrounds) určete název nepotřebného pozadí a klepněte na toto tlačítko.
Popis karty Údržba Karta Údržba (Maintenance) umožňuje provádět údržbu zařízení nebo měnit nastavení zařízení. Čištění (Cleaning) Provede čištění tiskové hlavy. Čištění tiskové hlavy odstraní překážky z trysek tiskové hlavy. Čištění proveďte, pokud je tisk slabý nebo se některá barva netiskne, přestože jsou všechny hladiny inkoustu dostatečně vysoké. Hloubkové čištění (Deep Cleaning) Provede hloubkové čištění. Hloubkové čištění proveďte tehdy, nevyřeší-li potíže s tiskovou hlavou dva pokusy o čištění.
Vybere skupinu inkoustu, pro kterou chcete očistit tiskovou hlavu. Chcete-li zobrazit položky, které je třeba zkontrolovat před provedením čištění nebo hloubkového čištění, klepněte na tlačítko Výchozí položky testu (Initial Check Items). Výchozí položky testu (Initial Check Items) Zkontrolujte, zda je napájení zařízení zapnuto, a otevřete kryt zařízení. U každého inkoustu zkontrolujte následující položky. Potom, v případě potřeby, proveďte funkci Kontrola trysek (Nozzle Check) nebo Čištění (Cleaning).
Dialogové okno Nastavení tiskové hlavy (Print Head Alignment) Chcete-li nastavit polohu tiskové hlavy ručně, klepněte na položku Nastavit tiskovou hlavu (Align Print Head) v dialogovém okně Spustit nastavení tiskové hlavy (Start Print Head Alignment) a proveďte operace popsané v zobrazených zprávách. Potom se zobrazí dialogové okno Nastavení tiskové hlavy (Print Head Alignment). Toto dialogové okno umožňuje kontrolu vytištěného vzoru a nastavení polohy tiskové hlavy.
pravá bitová mapa (špatně) Trysky tiskové hlavy mohou být zanesené. Konec (Exit) Zavře dialogové okno Kontrola vzorku (Pattern Check) a vrátí se na kartu Údržba (Maintenance). Čištění (Cleaning) Provede čištění tiskové hlavy. Čištění tiskové hlavy odstraní překážky z trysek tiskové hlavy. Čištění proveďte, pokud je tisk slabý nebo se některá barva netiskne, přestože jsou všechny hladiny inkoustu dostatečně vysoké.
Vypnout (Power Off) Vypne tiskárnu pomocí ovladače zařízení. Pomocí této funkce zařízení vypněte, pokud nemůžete stisknout tlačítko ZAPNOUT (tlačítko NAPÁJENÍ) na tiskárně, protože zařízení se nachází mimo váš dosah. Po klepnutí na toto tlačítko je možné zařízení znovu zapnout pouze stisknutím tlačítka ZAPNOUT (tlačítka NAPÁJENÍ) na tiskárně. Po použití této funkce nebude možné tiskárnu zapnout z ovladače tiskárny.
Tiché nastavení (Quiet Settings) Otevře Dialogové okno Tiché nastavení (Quiet Settings). Dialogové okno Tiché nastavení (Quiet Settings) umožňuje zadat nastavení, které sníží provozní hluk zařízení. Tento režim je vhodný, pokud může provozní hluk zařízení působit problémy, například při tisku v noci. Tuto operaci proveďte, pokud chcete změnit nastavení tichého režimu.
Uživatelská nastavení (Custom Settings) Otevře Dialogové okno Uživatelská nastavení (Custom Settings). Tuto funkci proveďte, pokud chcete změnit nastavení této tiskárny. Poznámka Pokud je tiskárna vypnutá nebo je zakázána obousměrná komunikace, pravděpodobně se zobrazí zpráva, protože počítač nemůže zjišťovat údaje o stavu tiskárny. Pokud taková situace nastane, klepnutím na tlačítko OK zobrazíte nejaktuálnější nastavení zadaná v počítači.
Nastavit hlavy ručně (Align heads manually) Funkce Nastavení tiskové hlavy (Print Head Alignment) na kartě Údržba (Maintenance) je obvykle nastavená na automatické nastavení tiskové hlavy, můžete jej ale změnit na ruční. Pokud nejsou výsledky tisku po automatickém nastavení tiskové hlavy uspokojivé, proveďte ruční nastavení tiskové hlavy. Chcete-li provést ruční nastavení tiskové hlavy, zaškrtněte toto políčko. Chcete-li provést automatické nastavení tiskové hlavy, zrušte zaškrtnutí tohoto políčka.
Poznámka Tuto funkci lze použít pouze s ovladačem tiskárny XPS. Zobrazit stav tiskárny (View Printer Status) Spustí aplikaci Monitor stavu Canon IJ. Tuto funkci proveďte, pokud chcete zkontrolovat stav tiskárny a postup probíhající tiskové úlohy. Poznámka Používáte-li ovladač tiskárny XPS, se odkaz „Monitor stavu Canon IJ“ změní na odkaz „Monitor stavu Canon IJ XPS“. Etiketa (About) Otevře Dialogové okno Etiketa (About) (About).
Související funkce Snížení hlučnosti zařízení Změna provozního režimu zařízení 161
Popis aplikace Náhled na tiskárnu Canon IJ Náhled na tiskárnu Canon IJ je aplikace, která ještě před tiskem zobrazí, jak bude vypadat výsledný tisk. Náhled vychází z informací, které jsou nastaveny v ovladači tiskárny a umožňuje zkontrolovat rozvržení dokumentu, pořadí tisku a počet stránek. Můžete také změnit typ média. Pokud chcete před tiskem zobrazit náhled, otevřete okno nastavení ovladače tiskárny, a zaškrtněte políčko Náhled před tiskem (Preview before printing) na kartě Hlavní (Main).
Konec (Exit) Ukončí aplikaci Náhled na tiskárnu Canon IJ. Nabídka Stránka (Page) Tato nabídka obsahuje následující příkazy pro výběr stránky, která má být zobrazena. Všechny tyto příkazy s výjimkou příkazu Vybrat stránku lze také vybrat v panelu nástrojů. První stránka (First Page) Zobrazí první stránku dokumentu. Pokud je aktuálně zobrazená stránka na prvním místě, je tento příkaz zobrazen šedě a nelze jej vybrat.
Celé (Whole) Zobrazí celou stránku dat na jedné stránce. 50% Zmenší zobrazená data na 50 % skutečné velikosti, ve které mají být vytištěna. 100% Zobrazí data ve skutečné velikosti, ve které mají být vytištěna. 200% Zvětší zobrazená data na 200 % skutečné velikosti, která má být vytištěna. 400% Zvětší zobrazená data na 400 % skutečné velikosti, která má být vytištěna.
Zdroj papíru (Paper Source) Zobrazí zdroj papíru dokumentu, který chcete vytisknout. Rozvržení stránky (Page Layout) Zobrazí rozvržení stránky dokumentu, který chcete vytisknout. Důležité Pokud jsou typ média a zdroj papíru nastaveny v aplikaci, tato nastavení mají přednost a změněná nastavení mohou být neúčinná.
Popis aplikace Náhled na tiskárnu Canon IJ XPS Náhled na tiskárnu Canon IJ XPS je aplikace, která ještě před tiskem zobrazí, jak bude vypadat výsledný tisk. Náhled vychází z informací, které jsou nastaveny v ovladači tiskárny a umožňuje zkontrolovat rozvržení dokumentu, pořadí tisku a počet stránek. Náhled také umožňuje úpravy tištěného dokumentu, úpravy tištěných stránek, změnu nastavení tisku a další funkce.
Tisknout všechny dokumenty (Print All Documents) Vytiskne všechny dokumenty v seznamu dokumentů a zavře aplikaci Náhled na tiskárnu Canon IJ XPS. Uložit historii tisku (Save Print History) Přepíná, zda mají být dokumenty tištěné pomocí aplikace Náhled na tiskárnu Canon IJ XPS uloženy jako položky historie tisku. Omezení počtu položek historie (History Entry Limit) Přepne maximální počet záznamů v historii tisku. Vyberte možnost 10 položek (10 Entries), 30 položek (30 Entries) nebo 100 položek (100 Entries).
Obnovit dokumenty (Reset Documents) Vrátí dokument vybraný v seznamu dokumentů do stavu před jeho přidáním do aplikace Náhled na tiskárnu Canon IJ XPS. Sloučené dokumenty jsou rozděleny a původní dokumenty jsou obnoveny. Tento příkaz má stejnou funkci jako položka nástrojů. (Obnovit dokumenty) na panelu Přesunout dokument (Move Document) Pomocí následujícího příkazu změňte pořadí dokumentů vybraných v seznamu dokumentů.
Tisk rozvržené stránky... (Page Layout Printing...) Otevře dialogové okno Tisk rozvržené stránky (Page Layout Printing). Toto dialogové okno umožňuje nastavit možnosti Tisk rozvržené stránky (Page Layout Printing), Stránky (Pages), Pořadí stránek (Page Order) a Ohraničení stránky (Page Border). Oboustranný tisk... (Duplex Printing...) Otevře dialogové okno Oboustranný tisk (Duplex Printing).
Přesunout o stránku vpřed (Move Forward One) Přesune aktuálně vybranou stránku z její aktuální polohy o jedno místo vpřed. Pokud je aktuálně vybraná stránka na prvním místě, je tento příkaz zobrazen šedě a nelze jej vybrat. Přesunout o stránku vzad (Move Backward One) Přesune aktuálně vybranou stránku z její aktuální polohy o jedno místo vzad. Pokud je aktuálně vybraná stránka na posledním místě, je tento příkaz zobrazen šedě a nelze jej vybrat.
První stránka (First Page) Zobrazí první stránku dokumentu. Pokud je aktuálně zobrazená stránka na prvním místě, je tento příkaz zobrazen šedě a nelze jej vybrat. Předchozí stránka (Previous Page) Zobrazí stránku umístěnou před aktuálně zobrazenou stránkou. Pokud je aktuálně zobrazená stránka na prvním místě, je tento příkaz zobrazen šedě a nelze jej vybrat. Další stránka (Next Page) Zobrazí stránku umístěnou za aktuálně zobrazenou stránkou.
200% Zvětší zobrazená data na 200 % skutečné velikosti, která má být vytištěna. 400% Zvětší zobrazená data na 400 % skutečné velikosti, která má být vytištěna. Nabídka Možnosti (Option) Přepíná stav zobrazit/skrýt následujících informací. Zobrazit miniatury (View Thumbnails) Potlačí všechny stránky v dokumentu vybrané v seznamu dokumentů a zobrazí je v dolní části okna náhledu. Tento příkaz má stejnou funkci jako položka (Zobrazit miniatury) na panelu nástrojů.
(Sloučit dokumenty) Sloučí dokumenty vybrané v seznamu dokumentů do jednoho dokumentu. Pokud je vybrán jen jeden dokument, je tento příkaz zobrazen šedě a nelze jej vybrat. (Odstranit dokument) Odstraní vybraný dokument ze seznamu dokumentů. Pokud seznam dokumentů obsahuje pouze jeden dokument, je tento dokument zobrazen šedě a nelze jej vybrat. (Obnovit dokumenty) Vrátí dokument vybraný v seznamu dokumentů do stavu před jeho přidáním do aplikace Náhled na tiskárnu Canon IJ XPS.
(Zpět) Vrátí zpět předchozí změnu. Pokud nelze vzít změnu zpět, je tato funkce zobrazena šedě a nelze ji vybrat. (Odstranit stránku) Odstraní aktuálně vybranou stránku. Pokud je nastaven tisk rozvržené stránky, budou stránky ohraničené červeným rámečkem odstraněny. Seznam dokumentů Zobrazí seznam tištěných dokumentů. Dokument vybraný v seznamu dokumentů se stane objektem pro zobrazení náhledu a úpravy. Název dokumentu (Document Name) Zobrazí název tištěného dokumentu.
Karta Informace o stránce (Page Information) Nastavení tisku jsou zobrazena pro každou stránku. Můžete změnit typ média a nastavení zdroje papíru. Velikost papíru v tiskárně (Printer Paper Size) Zobrazí velikost papíru dokumentu, který chcete vytisknout. Typ média (Media Type) Umožňuje vybrat typ média dokumentu, který chcete vytisknout. Zdroj papíru (Paper Source) Umožňuje vybrat zdroj papíru dokumentu, který chcete vytisknout.
Důležité Tato funkce není pro některá nastavení Typ média (Media Type) dostupná. Jas (Brightness) Vybere jas tisku. Čistě bílá a černá se nezmění, ale barvy mezi bílou a černou se změní. Intenzita (Intensity) Slouží k nastavení celkové intenzity tisku. Posunutím posuvníku doprava intenzitu zvýšíte, posunutím posuvníku doleva ji snížíte. Můžete rovněž ručně zadat hodnotu propojenou s posuvníkem. Zadejte hodnotu v rozmezí od -50 do 50.
Oboustranný tisk (Duplex Printing). V takovém případě se položka Oboustranný tisk (Duplex Printing) zobrazí šedě a není dostupná. Počet kopií (Copies) Slouží k zadání počtu kopií, které se mají vytisknout. Lze určit hodnotu v rozmezí od 1 do 999. Pokud nelze počet kopií pro tištěný dokument změnit, tato položka je zobrazena šedě a není dostupná. Konec (Exit) Ukončí aplikaci Náhled na tiskárnu Canon IJ XPS. Dokumenty zbývající v seznamu dokumentů budou z tohoto seznamu odstraněny.
Popis dialogového okna Monitor stavu Canon IJ Otevře se monitor stavu Canon IJ, který zobrazí stav zařízení a průběh tisku. Monitor oznamuje stav zařízení pomocí grafiky, ikon a zpráv. Funkce monitoru stavu Canon IJ Monitor stavu Canon IJ nabízí následující výhody: Stav tiskárny lze zjistit na obrazovce. Stav zařízení je na obrazovce zobrazen v reálném čase. Můžete sledovat průběh tisku jednotlivých tištěných dokumentů (tiskových úloh). Na obrazovce jsou zobrazeny typy chyb a jejich řešení.
Nádržka s inkoustem Pokud dojde k varování při nízké hladině inkoustu nebo k chybě z důvodu chybějícího inkoustu, zobrazí monitor stavu Canon IJ ikonu. Tato funkce dále zobrazí grafiku informující o odhadovaných hladinách inkoustu nádržky s inkoustem. V takovém případě otevřete dialogové okno Podrobnosti o inkoustu (Ink Details). Můžete zjistit podrobné informace, například zbývající hladinu inkoustu a typy nádržek s inkoustem tiskárny. Název dokum.
Tisk obálek (Envelope Printing) Zobrazí hlášení Rádce po zahájení tisku obálek. Chcete-li toto hlášení Rádce skrýt, zaškrtněte políčko Tuto zprávu příště nezobrazovat (Do not show this message again). Chcete-li hlášení Rádce znovu zobrazit, klepněte na položku Tisk obálek (Envelope Printing) na kartě Zobrazit hlášení Rádce (Display Guide Message) v nabídce Možnosti (Option) a aktivujte toto nastavení. Tisk Hagaki (Hagaki Printing) Zobrazí hlášení Rádce předtím, než tiskárna zahájí tisk Hagaki.
Tlačítko Číslo modelu inkoustu (Ink Model Number) Zobrazí typy nádržek s inkoustem pro dané zařízení. Zavřít (Close) Zavře dialogové okno Podrobnosti o inkoustu (Ink Details) a vrátí se do monitoru stavu Canon IJ. Nabídka Nápověda (Help) Pokud vyberete tuto položku nabídky, zobrazí se okno Nápověda monitoru tisku Canon IJ, ve kterém lze zjistit verzi a informace o ochraně autorských práv.
Aktualizace ovladačů MP Drivers Získání nejnovějších ovladačů MP Drivers Odstranění nepotřebných ovladačů MP Drivers Příprava před instalací ovladačů MP Drivers Instalace ovladačů MP Drivers 182
Získání nejnovějších ovladačů MP Drivers Ovladače MP Drivers zahrnují ovladač tiskárny a ovladače ScanGear (ovladač skeneru). Aktualizací ovladačů MP Drivers na nejnovější verzi ovladačů MP Driversmůžete vyřešit nevyřešené problémy. Podle potřeby můžete navštívit naši webovou stránku a stáhnout nejnovější ovladače MP Drivers pro váš model. Důležité Ovladače MP Drivers si můžete stáhnout bezplatně, ale budete muset uhradit případné poplatky za internetové připojení.
Odstranění nepotřebných ovladačů MP Drivers Ovladače MP Drivers, které již nepoužíváte, můžete odstranit. Při odstraňování ovladačů MP Drivers nejprve ukončete všechny spuštěné programy. Při odstraňování nepotřebných ovladačů MP Drivers postupujte takto: 1. Spusťte odinstalační program • Používáte-li systém Windows 8, mezi ovládacími tlačítky na pracovní ploše vyberte Nastavení (Settings) -> Ovládací panely (Control Panel) -> Programy (Programs) -> Programy a funkce (Programs and Features).
Klepněte na tlačítko Provést (Execute). Po zobrazení okna se žádostí o potvrzení klepněte na tlačítko Ano (Yes). Po odstranění všech souborů klepněte na tlačítko Hotovo (Complete). Tímto je dokončeno odstranění ovladačů MP Drivers. Důležité Pokud odinstalujete ovladače MP Drivers, bude odstraněn ovladač tiskárny, ovladač tiskárny XPS a ovladače ScanGear (ovladač skeneru).
Příprava před instalací ovladačů MP Drivers Tato část popisuje položky, které je třeba zkontrolovat před instalací ovladačů MP Drivers. Tuto část si také můžete přečíst v případě, že ovladače MP Drivers nelze nainstalovat. Kontrola stavu zařízení • Vypněte zařízení. Kontrolování nastavení počítače • Ukončete všechny spuštěné aplikace. • V systému Windows 8, Windows 7 nebo Windows Vista se přihlaste jako uživatel s účtem správce. V systému Windows XP se přihlaste jako správce počítače.
Instalace ovladačů MP Drivers Prostřednictvím Internetu se můžete připojit na naše webové stránky a stáhnout nejnovější ovladače MP Drivers a ovladač tiskárny XPS pro svůj model. Při instalaci stažených ovladačů MP Drivers postupujte takto: 1. Vypněte zařízení 2. Spusťte instalační program Poklepejte na ikonu staženého souboru. Spustí se instalační program.
Před instalací nejnovějších ovladačů MP Drivers odstraňte předchozí nainstalovanou verzi.
Tisk pomocí ovládacího panelu zařízení Tisk fotografických dat Použití funkce prezentace Tisk šablon, například linkovaného papíru nebo papíru pro grafy Tisk dokumentů (souborů PDF) uložených na paměťové kartě Tisk etiket disku 189
Tisk fotografických dat Tisk fotografií uložených na paměťové kartě Upřesnit fotografii Tisk fotografií s oříznutím Položky nastavení Použití užitečných funkcí zobrazení 190
Tisk fotografií uložených na paměťové kartě Je možné snadno vytisknout fotografii uloženou na paměťové kartě. Tato část popisuje postup tisku fotografie v nabídce Fotografie (Photo). 1. Zkontrolujte, zda je zařízení zapnuté. 2. Vložte fotografický papír. 3. Přejeďte po obrazovce DOMŮ a potom klepněte na možnost Fotografie (Photo). Použití ovládacího panelu 4. Vložte do patice pro kartu paměťovou kartu. Zobrazí se obrazovka pro výběr fotografií.
Klepnutím na střed zobrazené fotografie zobrazte nabídky. A. Celkový počet kopií Zobrazí se celkový počet kopií. Po klepnutí na možnost Kontrola počtu kopií celkem (Check total no. of copies) se zobrazí obrazovka, na které můžete zkontrolovat počet kopií každé fotografie. Na obrazovce Kontrola počtu kopií celkem (Check total no. of copies) můžete změnit počet kopií každé fotografie. B. Počet kopií Klepněte a určete počet kopií. 1. Cvrnkněte svisle a určete počet kopií.
Podrobné informace: Použití užitečných funkcí zobrazení D. Nastavení (Settings) Klepnutím zobrazte obrazovku Nastavení (Settings). Můžete změnit nastavení velikosti papíru, typu média, kvality tisku apod. Podrobné informace o položkách nastavení: Položky nastavení E. Přepínání skupiny Klepnutím přibližte fotografii. Podrobné informace: Použití užitečných funkcí zobrazení F. Specifikace data Klepněte a zadejte rozsah dat (datum poslední změny dat) pro výběr fotografií.
Podrobné informace: Použití užitečných funkcí zobrazení G. Hromadné zobrazení Klepnutím zobrazte více fotografií zároveň. Podrobné informace o metodě zobrazení: Použití užitečných funkcí zobrazení 6. Stiskněte tlačítko Barevný (Color). Zařízení zahájí tisk. Poznámka • Chcete-li tisk zrušit, stiskněte tlačítko Zastavit (Stop). • Během zpracování tiskové úlohy lze přidat tiskovou úlohu (vyhrazený tisk fotografií).
Poznámka • Během zpracování tiskové úlohy nelze měnit nastavení položek Vel. str. (Page size) a Typ (Type) na potvrzovací obrazovce pro nastavení tisku. Nastavení je stejné jako nastavení fotografie zahrnuté do tiskové úlohy. 3. Stiskněte tlačítko Barevný (Color). Vyhrazená fotografie bude vytištěna vedle fotografie, jejíž tisk již byl zahájen. Chcete-li vytisknout další fotografie, vraťte se zpět ke kroku 1.
Upřesnit fotografii Chcete-li tisknout fotografie uložené na paměťové kartě, můžete v nabídce Upřesnit tisk (Advanced print) vybrat následující položky. Tisk s oříznutím (Trimming print) Fotografii zobrazenou na dotykové obrazovce můžete upravit oříznutím a vytisknout. Tisk fotografií s oříznutím Prezentace (Slide show) Všechny fotografie uložené na paměťové kartě můžete zobrazit v podobě prezentace.
Tisk fotografií s oříznutím Fotografii zobrazenou na dotykové obrazovce můžete upravit oříznutím a vytisknout. 1. Zkontrolujte, zda je zařízení zapnuté. 2. Vložte fotografický papír. 3. Přejeďte po obrazovce DOMŮ a potom klepněte na možnost Upřesnit tisk (Advanced print). Použití ovládacího panelu 4. Vložte do patice pro kartu paměťovou kartu.
A. Klepnutím přepněte poměr stran rámce pro oříznutí. B. Přetažením umístíte rám ořezu. C. Přetažením nastavíte velikost rámu ořezu. D. Klepnutím dokončíte výběr oblasti pro oříznutí. Když je určena oblast k oříznutí, zobrazí se obrazovka pro potvrzení nastavení tisku. 8. Podle potřeby zadejte nastavení. Klepnutím na položku Kopie (Copies) zobrazte obrazovku pro zadání počtu kopií. Informace o položkách nastavení kromě položky Kopie (Copies): Položky nastavení 9. Stiskněte tlačítko Barevný (Color).
Položky nastavení Pro tisk fotografií uložených na paměťové kartě můžete určit nastavení velikosti papíru, typu média, opravy fotografie apod. Obrazovka Nastavení tisku Postup zobrazení obrazovky nastavení tisku se liší v závislosti na nabídce tisku. • V položce Fotografie (Photo) nebo Prezentace (Slide show): Klepnutím na položku Nastavení (Settings) se zobrazí následující obrazovka.
Poznámka • V závislosti na nabídce tisku nelze vybrat některé položky nastavení. Tato část popisuje položky nastavení v nabídce Fotografie (Photo). Položky nastavení, které nelze vybrat, jsou zobrazeny šedě nebo nejsou zobrazeny vůbec. • Některé položky nastavení nelze vybrat společně s jinými položkami nastavení nebo nabídkami tisku. Pokud nelze vybranou kombinaci nastavení použít, na dotykové obrazovce se zobrazí položky Detaily chyby (Error details).
Poznámka • Datum pořízení bude vytištěno v závislosti na nastavení Formát zobrazení data (Date display format) v části Nastavení zařízení uživatele (Device user settings) v nabídce Nastavení zařízení (Device settings) na obrazovce Nastavení (Setup).
Použití užitečných funkcí zobrazení Můžete zobrazit více fotografií současně, zadat rozsah dat (datum poslední změny dat) pro výběr fotografií nebo přepnout skupinu fotografií. Zobrazení více fotografií pro výběr fotografie Zadání data pro výběr fotografií Přiblížení fotografie Přepnutí skupiny fotografií Zobrazení více fotografií pro výběr fotografie Klepnutím na tlačítko na obrazovce pro výběr fotografií zobrazíte následující obrazovku. A.
B. Klepněte na datum, které chcete zobrazit. Jsou zobrazeny fotografie ze zadaného data. Poznámka • Datum bude zobrazeno v závislosti na nastavení Formát zobrazení data (Date display format) v části Nastavení zařízení uživatele (Device user settings) v nabídce Nastavení zařízení (Device settings) obrazovky Nastavení (Setup). Nastavení zařízení uživatele Přiblížení fotografie Klepnutím na tlačítko na obrazovce pro výběr fotografií zobrazíte následující obrazovku. A. Klepnutím přepněte zvětšení zobrazení.
Použití funkce prezentace Tisk fotografie během prohlížení prezentace 204
Tisk fotografie během prohlížení prezentace Všechny fotografie uložené na paměťové kartě můžete zobrazit v podobě prezentace. Během prezentace jsou fotografie automaticky zobrazovány jedna po druhé. Během prohlížení prezentace můžete oblíbenou fotografii vytisknout. 1. Zkontrolujte, zda je zařízení zapnuté. 2. Přejeďte po obrazovce DOMŮ a potom klepněte na možnost Upřesnit tisk (Advanced print). Použití ovládacího panelu 3. Vložte do patice pro kartu paměťovou kartu.
Při tisku fotografie Chcete-li zobrazenou fotografii vytisknout, pozastavte prezentaci klepnutím na dotykovou obrazovku. Před zahájením tisku vložte papír a stiskněte tlačítko Barevný (Color). Poznámka • Nastavení tisku můžete změnit klepnutím na položku Nastavení tisku (Print settings). Položky nastavení • Přehrávání pozastavené prezentace můžete obnovit klepnutím na tlačítko Pokračovat (Resume). • Během tisku můžete přehrávání pozastavené prezentace obnovit klepnutím na položku Pokračovat (Resume).
Tisk šablon, například linkovaného papíru nebo papíru pro grafy Šablonu, například linkovaný papír, papír pro grafy, kontrolní seznam atd., můžete vytisknout na běžný papír velikosti A4, B5 nebo Letter. Šablony pro tisk Tisk šablon Poznámka • Formulář šablony k vytištění lze stáhnout z webové služby. Stažení a tisk formulářů šablon Šablony pro tisk Jsou dostupné následující šablony: • Linkovaný papír Je možné vybrat tři formáty mezer mezi linkami.
• Chcete-li změnit počet kopií nebo nastavení tiskárny: Klepnutím na střed zobrazené fotografie zobrazte nabídky. A. Celkový počet kopií Zobrazí se celkový počet kopií. Po klepnutí na možnost Kontrola počtu kopií celkem (Check total no. of copies) se zobrazí obrazovka, na které můžete zkontrolovat počet kopií každé fotografie. Na obrazovce Kontrola počtu kopií celkem (Check total no. of copies) můžete změnit počet kopií každé fotografie. B. Počet kopií Klepněte a určete počet kopií.
nejvhodnější korekce. Pomocí podsvícení zesvětlí ztmavlý obličej pro tisk. Analyzuje také scény, např. scenérii, noční scénu, osobu atd., a automaticky koriguje jednotlivé scény pro tisk pomocí nejvhodnější barvy, jasu nebo kontrastu. V závislosti na typu fotografie nebude možné některé fotografie opravit. Poznámka • Ve výchozím nastavení jsou fotografie z webu pro sdílení fotografií vytištěny s automatickými opravami.
Stažení a tisk formulářů šablon Formulář šablony k vytištění lze stáhnout z webové služby. Před použitím této webové služby se seznamte s podmínkami jejího užívání. Upozornění k tisku prostřednictvím webové služby Důležité • Použití této funkce vyžaduje připojení zařízení k síti LAN a připojení k Internetu. 1. Zkontrolujte, zda je zařízení zapnuté. 2. Přejeďte po obrazovce DOMŮ a potom klepněte na možnost Cloud.
9. Stiskněte tlačítko Barevný (Color). Zařízení zahájí tisk.
Nastavení pro webovou službu Tato část popisuje nastavení zařízení pro webovou službu. Registrace účtu na webu pro sdílení fotografií Obnovení nastavení webové služby Před použitím této webové služby se seznamte s podmínkami jejího užívání. Upozornění k tisku prostřednictvím webové služby Registrace účtu na webu pro sdílení fotografií Podle níže uvedeného postupu zaregistrujte pro dané zařízení účet na webu pro sdílení fotografií.
7. Přečtěte si zprávu a klepněte na tlačítko Další (Next). 8. Po zobrazení obrazovky s potvrzením správy účtu klepněte na tlačítko Souhlasím (Agree). Poznámka • Klepnutím na tlačítko Ochr. os. úd. (Privacy Policy) můžete zobrazit zprávu o zásadách správy účtu. 9. Přečtěte si zprávu o zadávání přihlašovacího jména či e-mailové adresy a poté klepněte na tlačítko ID uživatele (User-ID) nebo E-mail (Email). Zobrazí se obrazovka k zadání přihlašovacího jména či e-mailové adresy.
12. Přečtěte si zprávu o zadávání hesla a poté klepněte na tlačítko Heslo (Password). Zobrazí se obrazovka k zadání hesla. 13. Zadejte heslo. Zadejte heslo stejným způsobem, jako přihlašovací jméno či e-mailovou adresu. Poznámka • V závislosti na nastavení webu pro sdílení fotografií nemusí být na některých webech heslo požadováno. 14. Klepněte na tlačítko Připojit (Connect). Zařízení se připojí k webu pro sdílení fotografií a vytvoření účtu bude potvrzeno.
Tisk z digitálního fotoaparátu Tisk fotografií přímo ze zařízení kompatibilního se standardem PictBridge (bezdrátová síť LAN) O Nastavení tisku PictBridge (bezdrátová síť LAN) 233
Tisk fotografií přímo ze zařízení kompatibilního se standardem PictBridge (bezdrátová síť LAN) K zařízení můžete prostřednictvím sítě LAN připojit zařízení kompatibilní se standardem PictBridge (bezdrátová síť LAN), např. digitální fotoaparát, videokameru nebo mobilní telefon, a vytisknout zaznamenané obrázky přímo bez použití počítače.
Poznámka • Podrobné informace o zjištění zařízení naleznete v návodu k použití vašeho přístroje kompatibilního se standardem PictBridge (bezdrátová síť LAN). 4. Zadejte nastavení tisku, jako je typ papír a rozvržení. Nastavení můžete provést pomocí nabídky na displeji LCD zařízení kompatibilního se standardem PictBridge (bezdrátová síť LAN). Vyberte velikost a typ papíru vloženého do zařízení.
O Nastavení tisku PictBridge (bezdrátová síť LAN) Nastavení na zařízení kompatibilním se standardem PictBridge (bezdrátová síť LAN) Nastavení zařízení Nastavení na zařízení kompatibilním se standardem PictBridge (bezdrátová síť LAN) Tato část popisuje funkci PictBridge (bezdrátová síť LAN) PictBridge zařízení. Informace o nastavení tisku na zařízení kompatibilním se standardem PictBridge (bezdrátová síť LAN) naleznete v uživatelské příručce zařízení.
A4/Letter: 4 na stránku Fotografické nálepky: 2 na stránku, 4 na stránku, 9 na stránku, 16 na stránku. *2 Pokud na zařízení značky Canon kompatibilním se standardem PictBridge (bezdrátová síť LAN) označíte položky pomocí značky „i“, vytisknou se informace o pořízení fotografie (data Exif) ve formátu seznamu (v rozvržení 20 na stránku) nebo na okrajích snímků (1 na stránku). (Nemusí být dostupné s některými zařízeními značky Canon kompatibilními se standardem PictBridge (bezdrátová síť LAN).
6. Klepněte na položku Nastavení fotogr. tisku (Photo print setting). Zobrazí se obrazovka Nastavení tisku PictBridge (PictBridge print settings). Podrobné informace o položkách nastavení: Nastavení tisku PictBridge Poznámka • Když vyberte možnost Nastav. tisku etiket disků (Disc label print setting), zobrazí se obrazovka Nastavení oblasti tisku disku (Set disc print area), na které lze změnit nastavení tisku etiket disků.
Tisk v režimu přístupového bodu Po přepnutí zařízení do režimu přístupového bodu můžete tisknout z externího zařízení, například počítače nebo chytrého telefonu, bez potřeby samostatného přístupového bodu. Důležité • Před použitím zařízení v režimu přístupového bodu nezapomeňte předem zadat název přístupového bodu zařízení a nastavení zabezpečení. Před použitím zařízení v režimu přístupového bodu 1. Zkontrolujte, zda je zařízení zapnuté. 2. Přejeďte po obrazovce DOMŮ a potom klepněte na položku WLAN.
Poznámka • Podrobné informace o tisku z externího zařízení, jako je počítač nebo chytrý telefon, prostřednictvím bezdrátové sítě LAN naleznete v uživatelské příručce zařízení nebo aplikace. • K tisku můžete použít také software PIXMA Printing Solutions. 8. Po dokončení tisku klepněte na tlačítko Konec (Exit). Zařízení ukončí režim přístupového bodu. 9. Po zobrazení obrazovky s potvrzením ukončení režimu přístupového bodu klepněte na tlačítko OK.
Kopírování Vytváření kopií Základní Zobrazí obrazovku s náhledem Položky nastavení Zmenšení nebo zvětšení kopie Oboustranné kopírování Nabídka Speciální kopie Kopírování dvou stránek s přizpůsobením tisku na jednu stránku Kopírování čtyř stránek s přizpůsobením tisku na jednu stránku Kopírování silných originálů, například knih Kopírování bez okrajů Kopírování fotografií 241
Vytváření kopií Originál, který chcete kopírovat, položte na skleněnou desku. Tato část popisuje postup kopírování pomocí možnosti Kopírovat (Copy). 1. Zkontrolujte, zda je zařízení zapnuté. 2. Vložte papír. 3. Přejeďte po obrazovce DOMŮ a potom klepněte na možnost Použití ovládacího panelu Zobrazí se pohotovostní obrazovka kopírování. 4. Položte originál na skleněnou desku. 5. Podle potřeby zadejte nastavení. A. Zobrazí se rozvržení kopírování. Přepněte rozvržení (jednostranný/2 na 1/oboustranný). B.
C. Klepnutím zobrazte položky nastavení tisku. Podrobné informace o položkách nastavení: Položky nastavení D. Klepnutím si můžete na obrazovce náhledu prohlédnout tištěný obrázek. Podrobné informace: Zobrazí obrazovku s náhledem E. Klepněte a zadejte velikost stránky. 6. Chcete-li kopírovat barevně, stiskněte tlačítko Barevný (Color), chcete-li kopírovat černobíle, stiskněte tlačítko Černý (Black). Zařízení začne kopírovat. Po dokončení kopírování odeberte originál ze skleněné desky.
Přidání úlohy kopírování (vyhrazené kopírování) Během tisku lze přidat úlohu kopírování (vyhrazené kopírování). Pokud lze přidat úlohu kopírování, zobrazí se následující obrazovka. Vložte originál na skleněnou desku a stiskněte stejné tlačítko, které jste stiskli naposledy (tlačítko Barevný (Color) nebo Černý (Black)). Důležité • Při vkládání originálu na skleněnou desku posunujte s krytem dokumentů opatrně. Poznámka • Je-li možnost Kval.
Zobrazí obrazovku s náhledem Pokud je na pohotovostní obrazovce kopírování zobrazena položka na obrazovce náhledu zobrazit náhled obrazu výtisku. , klepnutím na položku můžete Důležité • Je-li zobrazena pohotovostní obrazovka kopírování, není položka podmínek. zobrazena za následujících • Pokud je v nastavení 2stran. nast. tisku (2-sidedPrintSetting) vybrána položka 2stranné (2sided).
Pokud zde přidržíte prst, bude se zvětšení měnit po 10 %. E. Klepnutím se vraťte na pohotovostní obrazovku kopírování. F. Zobrazí se aktuálně zadané zvětšení. Klepnutím vyberte položku Přiz.vel.str. (Fit to page).
Položky nastavení Podle potřeby můžete kopírovat některá nastavení, například zvětšení nebo intenzitu. Obrazovka Nastavení tisku Postup zobrazení obrazovky s nastavením tisku se liší v závislosti na nabídce kopírování. • Na obrazovce Kopírovat (Copy): Klepnutím na tlačítko Nastavení (Settings) na pohotovostní obrazovce kopírování zobrazíte následující obrazovku. • Na obrazovce Kopie bez ohraničení (Borderless copy) nebo Kopie s vymaz.
Poznámka • V závislosti na nabídce kopírování nelze vybrat některé položky nastavení. Tato část popisuje položky nastavení v nabídce Kopírovat (Copy). Položky nastavení, které nelze vybrat, jsou zobrazeny šedě. Podrobnosti o položkách nastavení pro funkci Kopie fotografií (Photo copy) naleznete v části Kopírování fotografií. • Některé položky nastavení nelze vybrat společně s jinou položkou nastavení nebo nabídkou kopírování.
C. Klepnutím potvrďte nastavení intenzity. 3. Vel. str. (Page size) Vyberte velikost vloženého papíru. 4. Typ (Type) (Typ média) Vyberte typ vloženého média. 5. Kval.tisku (Print qlty) (Kvalita tisku) Upravte kvalitu tisku podle originálu. Důležité • Pokud vyberete pro kvalitu tisku možnost Koncept (Draft), Typ (Type) nastavíte na možnost Běžný papír (Plain paper) a kvalita je horší, než jste čekali, vyberte Kval.tisku (Print qlty) Standardní (Standard) nebo Vysoká (High) a zkuste kopírování zopakovat.
Zmenšení nebo zvětšení kopie Kromě volitelné změny zvětšení můžete vybrat také kopírování s přednastaveným poměrem nebo kopírování přizpůsobené velikosti stránky. Po klepnutí na tlačítko Nastavení (Settings) na pohotovostní obrazovce kopírování se zobrazí následující obrazovka. Klepnutím na položku Zvětšení (Magnif.) vyberte metodu zmenšení nebo zvětšení. A. Klepnutím zobrazte níže uvedenou obrazovku. 1. Cvrnkněte a určete úroveň zvětšení. 2. Klepnutím určete úroveň zvětšení.
Poznámka • Pokud zvolíte možnost Přiz.vel.str. (Fit to page), může se v závislosti na originálu stát, že velikost stránky nebude zjištěna správně. V takovém případě vyberte jiné nastavení než Přiz.vel.str. (Fit to page). • Přednastavený poměr Můžete vybrat jeden z přednastavených poměrů zmenšení nebo zvětšení kopií. Vyberte správný poměr velikosti originálu a velikosti stránky. Nastavení v nabídce Zvětšení (Magnif.
Oboustranné kopírování Pokud na obrazovce Kopírovat (Copy) vyberete pro nastavení 2stran. nast. tisku (2-sidedPrintSetting) možnost 2stranné (2-sided), je možno okopírovat dva jednostránkové originály z obou stran na jeden list papíru. Vyberte možnost 2stranné (2-sided) a pak klepněte na tlačítko OK. Pokud po výběru možnosti 2stranné (2-sided) klepnete na tlačítko Upřesnit (Advanced), můžete určit orientaci a stranu pro sešití originálu.
Standardní (Standard) a pokuste se spustit kopírování znovu. Pokud se problém nevyřeší, nastavte kvalitu tisku na hodnotu Koncept (Draft) a zkuste kopírování opakovat. • Nastavení oboustranného kopírování lze použít v kombinaci s možností Rozvržení 2 na 1 (2-on-1 copy) nebo Rozvržení 4 na 1 (4-on-1 copy), když je vybrána možnost Standard. kopírování (Standard copy).
Poznámka • Během tisku lze přidat úlohu kopírování.
Nabídka Speciální kopie Chcete-li kopírovat originály, můžete v nabídce Upřesnit tisk (Advanced print) vybrat následující položky. Kopie bez ohraničení (Borderless copy) Obrázky můžete kopírovat tak, aby vyplnily celou stránku a nevznikaly okraje. Kopírování bez okrajů Kopie s vymaz. rámečku (Frame erase copy) Při kopírování silných originálů, například knih, můžete kopírovat bez černých okrajů okolo obrázku a s opravou stínů.
Kopírování dvou stránek s přizpůsobením tisku na jednu stránku Pokud v nabídce Kopírovat (Copy) v položce Rozvržení (Layout) vyberete možnost Rozvržení 2 na 1 (2on-1 copy), je možné dva jednostránkové originály zmenšit a zkopírovat na jednu stránku. Na pohotovostní obrazovce kopírování klepněte na tlačítko Nastavení (Settings). Zobrazí se obrazovka s nastavením tisku. Na ní vyberte pro položku Rozvržení (Layout) možnost Rozvržení 2 na 1 (2-on-1 copy).
• Tuto funkci kopírování lze použít v kombinaci s funkcí 2stranné kopírování. Použijete-li tuto funkci kopírování v kombinaci, můžete zkopírovat až 4 stránky originálu na 1 list papíru. V takovém případě budou na každou stranu papíru zkopírovány 2 strany originálu. Pokud použijete tuto funkci v kombinaci, vyberte na obrazovce s nastavením tisku u možnosti 2stran. nast. tisku (2-sidedPrintSetting) hodnotu 2stranné (2-sided) a poté vyberte orientaci a stranu sešití tiskového papíru.
Poznámka • Během tisku lze přidat úlohu kopírování. Přidání úlohy kopírování (vyhrazené kopírování) • Pokud použijete tuto funkci v kombinaci s oboustranným kopírováním, objeví se po dokončení skenování druhého listu originálu výše uvedená obrazovka. Při skenování třetí a čtvrté strany originálu postupujte podle pokynů na obrazovce.
Kopírování čtyř stránek s přizpůsobením tisku na jednu stránku Pokud v nabídce Kopírovat (Copy) v položce Rozvržení (Layout) vyberete možnost Rozvržení 4 na 1 (4on-1 copy), je možno čtyři jednostránkové originály zmenšit a zkopírovat na jednu stránku. K dispozici jsou čtyři různá rozvržení. Vyberte možnost Rozvržení 4 na 1 (4-on-1 copy) a pak klepněte na tlačítko OK. Pokud po výběru možnosti Upřesnit (Advanced) klepnete na tlačítko Rozvržení 4 na 1 (4-on-1 copy), můžete určit orientaci a pořadí originálu.
Po výběru pořadí můžete vybrat, zda má být použita obrazovka náhledu. Když klepnete na položku ZAP (ON), zobrazí se obrazovka náhledu, na které lze zkontrolovat orientaci. Poznámka • Pokud se při skenování zobrazí na dotykové obrazovce zpráva Paměť zařízení je plná. Zpracování nemůže pokračovat. (Device memory is full. Cannot continue process.), nastavte kvalitu tisku na Standardní (Standard) a pokuste se spustit kopírování znovu.
A. Klepnutím spusťte skenování originálu. Po dokončení skenování odeberte ze skleněné desky list originálu, vložte na skleněnou desku další list a klepněte na tlačítko Skenovat (Scan). B. Klepnutím spusťte kopírování naskenovaného originálu. Po naskenování čtvrtého listu originálu zahájí zařízení kopírování. Poznámka • Během tisku lze přidat úlohu kopírování.
Kopírování silných originálů, například knih Při kopírování silných originálů, například knih, můžete kopírovat bez černých okrajů okolo obrázku a s opravou stínů. Pomocí této funkce můžete omezit zbytečné plýtvání inkoustem. 1. Zkontrolujte, zda je zařízení zapnuté. 2. Vložte papír. 3. Přejeďte po obrazovce DOMŮ a potom klepněte na možnost Upřesnit tisk (Advanced print). Použití ovládacího panelu 4. Klepněte na položku Kopie s vymaz. rámečku (Frame erase copy). 5. Položte originál na skleněnou desku.
Kopírování bez okrajů Obrázky můžete kopírovat na fotografický papír tak, aby vyplnily celou stránku a nevznikaly okraje. 1. Zkontrolujte, zda je zařízení zapnuté. 2. Vložte fotografický papír. 3. Přejeďte po obrazovce DOMŮ a potom klepněte na možnost Upřesnit tisk (Advanced print). Použití ovládacího panelu 4. Klepněte na položku Kopie bez ohraničení (Borderless copy). 5. Položte originál na skleněnou desku. 6. Podle potřeby zadejte nastavení.
Kopírování fotografií Vytištěné fotografie můžete skenovat a všechny je vytisknout najednou. 1. Zkontrolujte, zda je zařízení zapnuté. 2. Vložte fotografický papír. 3. Přejeďte po obrazovce DOMŮ a potom klepněte na možnost Upřesnit tisk (Advanced print). Použití ovládacího panelu 4. Klepněte na položku Kopie fotografií (Photo copy). 5. Potvrďte pokyny na obrazovce a klepněte na tlačítko OK. 6. Podle pokynů na obrazovce položte vytištěnou fotografii na skleněnou desku a klepněte na tlačítko OK.
Slouží k nastavení počtu kopií. 2. Vel. str. (Page size) Vyberte velikost vloženého papíru. 3. Typ (Type) (Typ média) Vyberte typ vloženého média. 4. Kval.tisku (Print qlty) (Kvalita tisku) Vyberte kvalitu tisku podle originálu. 5. Okraj (Border) (Tisk s ohraničením nebo bez ohraničení) Vyberte tisk s ohraničením nebo bez ohraničení. 6. Opr.foto. (Photo fix) Vyberte možnost Žádné opravy (No correction), Autom. opr. foto. (Auto photo fix) nebo Korekce vyblednutí (Fade restoration).