PIXMA MP110/130 SERVICE MANUAL REVISION 0 HY8-13A2-000 COPYRIGHT©2004 CANON INC.
Scope This manual has been issued by Canon Inc., to provide the service technicians of this product with the information necessary for qualified persons to learn technical theory, installation, maintenance, and repair of products. The manual covers information applicable in all regions where the product is sold. For this reason, it may contain information that is not applicable to your region.
I.
II. TABLE OF CONTENTS Page 1-1 1-1 1-2 1-3 1-3 1-4 1-5 1-5 1-8 1-8 1-8 1-8 1-9 1-12 1-12 1-14 1-16 1-19 1-21 1-25 1-29 1-30 1-30 1-30 1-31 Part 1: MAINTENANCE 1. MAINTENANCE 1-1. Adjustment, Periodic Maintenance, Periodic Replacement Parts, and Replacement Consumables by Service Engineer 1-2. Customer Maintenance 1-3. Product Life 1-4. Special Tools for Service 1-5. Serial Number Location 2. LIST OF ERROR DISPLAY / INDICATION 2-1. Users Error Messeges 2-2. User Error Codes 2-3. Service Error Codes 2-4.
Page 2-1 2-1 2-2 2-6 Part 2: TECHNICAL REFERENCE 1. NEW TECHNOLOGIES 2. CLEANING MODE AND AMOUNT OF INK PURGED 3. PRINT MODE 4. FAQ (Problems Specific to the PIXMA MP110/ MP130 and Corrective Actions) Page 3-1 3-2 Part 3: APPENDIX 1. BLOCK DIAGRAM 2.
Part 1 Maintenance
1. MAINTENANCE 1-1 Adjustment, Periodic Maintenance, Periodic Replacement Parts, and Replacement Consumables by Service Engineer (1) Adjustment Approx. Item Timing Purpose Tool Country setting (Service Mode) - At MAIN BOARD ASS’Y replacement To set the country. 1 min.
(3) Periodic replacement parts Item Timing Purpose Tool Approx. time None (4) Replacement consumables Item Timing Purpose Tool Approx. time None 1-2 Customer Maintenance Item Timing Purpose Tool Print head alignment At print head replacement. To compensate the print head landing-in position error. Print head cleaning When print quality is not satisfying. To improve nozzle conditions. Print head refreshing When print quality is not satisfying (and not improved by print head cleaning).
1-3 Product Life (1) Main body At any of the following (I) to (II), whichever comes first. (I) Print Volume: 4,000 pages BK: 2,000 pages (in printing A4, Black 1,500 character standard document pattern) CL: 1,200 pages (in printing A4, 7.
1-5 Serial Number Label Location The middle on the rear cover 1-4
2. LIST OF ERROR DISPLAY / INDICATION Error Messages Look for the applicable error message and execute the appropriate countermeasures. 2-1 User’s error messages Look for the applicable error message and execute the appropriate countermeasures. “BLACK INK LOW” Cause: The ink level in the black ink tank is low. Solution: Make sure you have a new black ink tank ready to replace the used one when ink runs out.
“CARTRIDGE JAMMED” Printing position compensation failed Cause: Carriage movement prevented by one of the following. Damaged or deformed carriage shaft. Insufficient grease. Solution: Replace the carriage shaft. Replace the deformed parts. Apply more grease. Cause: Bi-directional print displacement compensation failed because the carriage motor is out of step, or some similar reason. Solution: Replace the carriage motor.
“COLOR INK LOW” Cause: The ink level in the color ink tank is low. Solution: Make sure you have a new color ink tank ready to replace the used one when ink runs out. If the machine stops printing when copying or photo printing, you can continue printing by pressing the [OK] button. However, note that ink may run out. If print quality deteriorates or the print out is blank, replace the ink tank. “COVER OPEN” Cause: You opened the scanning unit (printer cover) during an operation.
2-2 User Error Codes None. 2-3 Service Error Codes None 2-4 New Error Code and Recovery Methods None 2-5 Warnings Main body no LED indications.
2-6 Troubleshooting by symptom General errors Symptom Solution The unit does not power on. (1) Check the power cord connection. (2) Check the connection between the MAIN board (J5) and the power supply unit. (3) Replace the power supply unit. (1) Check the connection between the Operation panel unit and the MAIN board (J4). (2) Replace the SCANNER unit. (3) Replace the MAIN board. (1) Check the connection between the Operation panel unit and the MAIN board (J4). (2) Replace the SCANNER UNIT.
Symptom Solution Remarks (1) Remove the print head and reinstall it. (2) Perform the cleaning on the print head five times with the cleaning operation and print out the nozzle check pattern. Visually check the test print for non-discharge of ink from nozzle. (Fig. 1-1) (3) Replace the print head. *2 (4) Replace the appropriate ink tank. (5) Replace the purge unit. (6) Replace the carriage unit. (7) Replace the MAIN board. *1 (8) Replace the MAIN board.
board after the replacement. *2 Replace the print head only when the machine does not recover after refreshing the print head twice.
3. REPAIR 3-1 Notes on Service Part Replacement (and Disassembling / Reassembling) Service part Notes on replacement*1 Adjustment / settings Operation check MAIN BOARD - Before removal of the MAIN - Nozzle check ASS’Y board ass'y, remove the power 1) All clear. patten print (HY7-2810/2811) cord, and allow for approx.
Service part Notes on replacement*1 Adjustment / settings*2 Operation check TIMING SLIT STRIP -Upon contact with the - Nozzle check patten FILM film, wipe the film (HY7-2821) with ethanol. TIMING SLIT DISK 1) Perform the print head print alignment in the User Mode. - Confirm no grease is FILM on the film. (Wipe off (HY7-2817) any grease thoroughly with ethanol.
3-2 Special Notes on Repair Servicing (1) Flexible cable and harness wiring, connection Be careful of wiring of the flexible cables and harness. Improper wiring or connection may cause breakage of a line, leading to ignition or emission of smoke.
Each of the front right cover or the front left cover has 4 claws. Since the claws of A are located back of the paper feed section, remove the covers at the A claws from inside by hand as shown below.
3-3. Adjustment / Settings (1) Paper feed motor adjustment The following adjustment is necessary when installing the paper feed motor unit. 1) When installing the motor unit, secure the screws by moving in the direction to stretch the belt tightly with proper tension (in the direction indicated by the light blue arrow in the figure below). 2) After replacement, be sure to perform the Service Test Print.
(2) Grease application 1 (Rear Side) 2 3 (Rear Side) 4, 5 6 7 12 10 9 8 11 (Bottom Surface) 1-17
13 Parts to be applied Locations Grease/Oil Type PRINTER FRAME 1 2 CARRIAGE UNIT Sliding Portion (back surface) Chassis Surface FLOIL KG107 FLOIL KG107 CARRIAGE RAIL 3 4 CARRIAGE UNIT Sliding Portion (back surface) CARRIAGE UNIT Sliding Portion (front surface) FLOIL KG107 FLOIL KG107 240 - 360 mg 60 - 140 mg 5 6 CARRIAGE UNIT Sliding Portion (bottom surface) IDLER PULLY Sliding Portion FLOIL KG107 MOLYKOTE PG641 35 - 60mg IDLER PULLY PLATEN UNIT 7 EJECT ROLLER Sliding Portion FLOIL KG107
3-4 User Data Flowchart Press the COPY button, and press the Menu button. 25% MIN. 95% A4 -> LTR 1.ENLARGE/REDUCE PRESET RATIO *100% 170% 5"x7" -> LTR 2.PAPER SIZE ZOOM - 25% - 400% 212% 4"x6" -> LTR *LTR 400% MAX. 4"x6" 5"x7" A4 3.PAPER TYPE *PLAIN PAPER HIGH RES. PH PRO OTHER 4.DENSITY LT DK 5.IMAGE QUALITY *NORMAL FINE (PHOTO) FAST 6.SPECIAL COPY *NONE BDERLESS COPY 7.USER DATA 1.INK VOLUME 1.LOWINK WARNING ON OFF 2.
Press the Photo Print button, and press the Menu button. 1.PHOTO PRINT INDEX ALL IMAGES 2.SELECT SIZE SINGLE IMG IMAGE NUMBE NO. OF PRINTS SEL RANGE FRAME RANGE FIRST LAST DATE RANGE DATE: To LTR 4"x6" 5"x7" A4 3.SELECT TYPE PLAIN PAPER HIGH RES. GLOSSY PH PRO PH PLUS OTHER 4.PRINT DATE OFF ON 5.USER DATA * *: Refer to the Copy Mode Menu.
3-5 Service Switches (1) Hardware Switches There is no service hardware switch on the Circuit board. (2) Service Data Overview Service data can be checked and changed with items on display menus. The effective SSSWs/parameters and their default values in this machine are shown in Service Menu Settings. SERVICE MENU FIRMWARE: xx.xx The version number of ROM mounted on the main unit is displayed. LANG.
(3) Service Data Registration/ Setting Method Service data can be registered/set by the following operations: 100% NORMAL STANDBY(Copy mode) * If MARKET MODEL is OT, LTR PLAIN 1) User data mode selection Recording paper size will be A4. Press the Menu button. 01 1.ENLARGE/REDUCE PRESET RATIO 2) Service data mode selection Press the SCAN, COPY, and SCAN buttons in sequence. SERVICE MENU FIRMWARE: xx.xx 3) Menu item selection Select the menu item by pressing the or button. or button.
(4) Service Data Menu Service menu SERVICE MENU FIRMWARE: xx.xx Example) 01.03 The version mounted in the machine is displayed. SERVICE MENU LANG. SELECT? NO - + In User Mode, languages to switch are displayed or not. US/OT = Default: YES JP = Default: NO YES SERVICE MENU CARD PROTECT? Not used SERVICE MENU MARKET MODEL? US - + Market setting OT JP SERVICE MENU COUNTER ACCESS After pressing COPY button - + input a value for the following item. PRINT PAGE COUNT 0 / 0 No.
(5) New SSSWs/Parameters Added to This Model No SSSWs/parameters are newly added to this model.
3-6 DIAGNOSTIC MENU (hereinafter referred to as Test Mode) (1) User Test Print Functions User enabled Test print functions are as follow. Nozzle check pattern If you find a nozzle pattern indistinct or partially missing when you conduct this test print, do the head cleaning. If the symptom is not solved even after the cleaning is done three times, do the head refreshing. If the head refreshing does not solve the symptom, replace the BJ cartridge or the ink cartridge.
(3) Test Mode Menu This machine is equipped with the test mode to check operations of various functions listed below. Please refer to Service Data Registration/Setting for instructions to select the test mode. Press the [Stop/Reset] button and then the [ON/OFF] button to end the test mode. DIAGNOSTIC MENU Firmware: xx.xx * ' indicates that these are not used in the field. 1.CSLED Adjustme 2.Print COMET* 4.FB Scan Test* 9.Panel Test 10.Scanner Self* Diagnosis Test 11.DRAM Test* 12.CR Run-in* 13.
a) PANEL Test If you select test menu in the TEST mode, PANEL test is displayed. To select the test menu, press the OK button. In this test, check that the display, LED lamps, and keys on the control panel are operating correctly. a-1) Display test If you press OK button in the menu of the operation panel, 16 letters of “H” are displayed in two lines. If you press OK button one more time, all the LCD dots are displayed. If you press OK button once again, “_” is displayed.
9. PANEL TEST Press the OK button HHHHHHHHHHHHHHHH HHHHHHHHHHHHHHHH H pattern display Press the OK button All LCD dots display Press the OK button ________________ _ pattern display ________________ Press the OK button LED TEST All LED lamps light up Press the OK button When a button is pressed, the corresponding character goes out KEY TEST PCSPM-+OBCSO Press the OK button OK Press the Stop/Reset key to end the test.
3-7 Upgrading the version of flash ROM To upgrade the version of flash ROM, always down load via USB interface. The flash ROM upgrading file will be distributed in SSIS at the timing of upgrading the version. The detailed upgrading procedure will be introduced by a Service Information bulletin when the version is upgraded. [Prerequisite (reference)] - Printer to Personal Computer: Connect via USB cable. (Connect only one printer to the computer.
4. Cleaning Your Machine 4-1 Exterior Main Unit Outer Covers Dampen a soft cloth with water or a neutral detergent diluted with enough water, and wring it thoroughly. Wipe the covers with the cloth. 4-2 Scanning Unit Document Glass Open the pressure plate. Dampen a clean cloth and wring it thoroughly. Wipe the document glass with the cloth. Then wipe the document glass with a dry soft cloth well, so that no stain of the wet cloth remains on the glass.
5. Shipping the Main Unit If you must ship the machine as after making repairs, be sure to go through the following: 1) See to it that the BJ cartridge (print head) and the ink tank remain fitted in the carriage. 2) Press the ON/OFF button to turn off the power, and fix the carriage in its home position; then, disconnect the power cord. Attention: (1) If you leave the BJ cartridge (print head) alone on its own, the ink (especially black pigment ink) can start to cake.
Part 2 Technical Reference
1. NEW TECHNOLOGIES No new technologies are newly added to this model. 2.
3.
(3) Standard Color Printing (at PC Printer Driver) Blue character: Default setting Yellow frames: Selectable, even if Custom is not selected in the driver UI.
(4) Standard Gray Scale Printing (at PC Printer Driver) Blue character: Default setting Yellow frames: Selectable, even if Custom is not selected in the driver UI.
(5) Borderless Printing (at PC Printer Driver) Blue character: Default setting Yellow frames: Selectable, even if Custom is not selected in the driver UI.
* A A B B B B C No. 1 2 3 4 5 6 7 Paper feeding Installation Function - Check ink tank - Paper out error - Paper cannot be fed - Cannot print - Multiple pages of paper are fed simultaneously. - Blank paper is ejected. - Paper out error - Paper cannot be fed - Cannot print - Paper out error - Paper cannot be fed - Cannot print - Paper out error - Paper cannot be fed - Cannot print - Check ink tank No paper feeding when a number of sheets are loaded.
B C C 9 10 11 Quality Image - Smears on the already printed side when printing the other side - Smears on the address side - Smears on the backside - Cannot print to the bottom edge of paper - Lines or uneven print density appear in the trailing edge of paper - Cannot print properly - Lines or uneven print density (on skin tones and background) - Cannot print properly Smearing
Part 3 Appendix
1.
PIXMA MP110/MP130 Specification Printer Scanner Copy Facsimile Memory Card Media YES YES YES NO YES CF (Type I/II) Micro Drive Smart Media SD/miniSD* Multi Media Card Data Storage xD-Picture Card* Memory Stick/Memory Stick Duo* *: At Adapter READ YES (unsupported for Windows 98/Me) WRITE NO Photo-Direct print Applicable Image Supported Media Size Paper Type Layouts Plain Paper JPEG (DCF/CIFF/Exif 2.
Type Reading System ADF Reading Resolution Sensor Type Optical resolution Interpolated resolution Color Gray Gradation bit (Input /Output) Maximum Document Size Effective Scanning Width (mm) 216mm Local Scan Driver TWAIN WIA (Windows XP) Film Scan Flatbet Contact Image Sensor NO 1200 x 2400 dpi 9600 x 9600 dpi 48bit/24bit 16bit/8bit Letter/A4 YES YES NO ASF Size YES A4, A5, B5, 4”*6”, LTR, LGL, 4”x6”, 5”x7”, Envelop Paper Materials Plain Paper (A4/A5/B5/LTR/LGL/Cus
Copy Print Resolution Black & White Color Copy speed Black & White (Draft) Color (Fast) Scanning Density Adjustment YES Manual Multiple Copies Preset RE Ratio Enlarge Max. 4”x 6” -> LTR 5”x 7” -> LTR Reduction 100% A4 -> LTR Min.
PRINTED IN JAPAN (IMPRIME AU JAPON) CANON INC.