User Guide
Start Here
Easy Setup Instructions
Important
When moving the machine, carry the machine at both ends as shown below. Do
not lift the machine by grasping the Paper Support Extension.
aPlacethemachineonaatandhorizontalsurface,anddonot
placeanyobjectsinfrontofthemachine.
Removealltheshippingtapesandprotectivematerialontheoutsideofthe
machine.
ThenopenthePaperOutputTray.
bLifttheScanningUnit(PrinterCover),andpulltheScanningUnit
Supportdownintoplace.
ScanningUnit(PrinterCover)
cRemovetheprotectivematerialontherightside.
ProtectiveMaterial
Caution
Before turning on the machine, remove all of the shipping tapes.
1 Prepare the Machine
dLifttheScanningUnit(PrinterCover)slightlytosettheScanning
UnitSupportbacktoitsoriginalposition,andthengentlyclose
theScanningUnit(PrinterCover).
ePlugthepowercordinthebackofthemachineandconnectthe
otherendtothewalloutlet.
PowerCord
DocumentCover
Important
Make sure that the Document Cover is closed.
Note
DoNOTconnecttheUSBcableatthisstage.
fPresstheON/OFFbuttontoturnonthemachine.Themachine
willinitialize.Waituntilthe
Powerlampstopsashingand
remainslitgreen.
gLifttheScanningUnit(PrinterCover),andpulltheScanning
UnitSupportdownintoplace.TheFINECartridgeHolder
automaticallymovestotheleft.
ScanningUnit(PrinterCover)
h
Writedowntheserialnumberlocatedinsidethemachine.You
willneedthistoregisteryourproduct.
SerialNumber
2 Install the FINE Cartridges
aRemovetheBlackFINECartridgefromitsbox.
bRemovetheprotectivetapegently.
ProtectiveTape
PrintHeadNozzles
ElectricalContacts
Important
Do not touch the electrical contacts or Print Head Nozzles on a FINE Cartridge.
The machine may not print out properly if you touch it.
Do not reattach the protective tape once you have removed it.
Be careful not to stain your hands or surrounding work area with ink on the
removed protective tape.
cInserttheBlackFINECartridgeslightlyslantedintotheleftslot
B
.
•
•
•
dPushuptheFINECartridgeuntilitclicksintoplace.
Important
For correct machine operation, make sure the FINE Cartridge is securely inserted.
Click
eRepeattheprocedurefortheColorFINECartridge,insertingit
intotherightslot
C
.
fLifttheScanningUnit(PrinterCover)slightlytosettheScanning
UnitSupportbacktoitsoriginalposition,andthengentlyclose
theScanningUnit(PrinterCover).
Important
Once you have installed the FINE Cartridges, the LED will ash green. Wait until
the LED stops ashing and displays 1. It takes about one to two minutes.
Hardware setup is complete.
Photo All-in-One
Q T 5 1 2 0 6 V 0 1
Unpack the Machine
Pleaseconrmtheincludeditemsagainsttheillustrationprintedonthelidofthepackingbox.
AUSBcableisnecessarytoconnectthemachinewithyourcomputer.
•
•
Important
When cleaning the exterior of the machine, use a soft cloth to wipe it gently. For details, refer to “Cleaning Your Machine” in the Quick Start Guide.