Operation Manual

A
dvanced Guide
>
Scanning
>
Saving Scanned Data on the USB Flash Drive/Memory Card Using the Operation Panel of
the Machine
> Saving Scanned Data on the USB Flash Drive/Memory Card Using the Operation Panel of the Machine
Saving Scanned Data on the USB Flash Drive/Memory Card
Using the Operation Panel of the Machine
You can save scanned data on the USB flash drive or memory card using the Operation Panel.
Important
Before inserting the USB flash drive.
You may need an extension cable if the USB flash drive cannot be inserted into the Direct Print
Port of the machine. For details, ask an electronics store.
Depending on the type of USB flash drive, the operation may not be guaranteed.
Some USB flash drives with security settings may not be used.
Do not remove the USB flash drive or memory card from the machine under the following
conditions:
while scanning is in progress
before saving scanned data
You cannot use the USB flash drive and memory card at the same time. Be sure to use either of
them as a media for saving scanned data.
Scanned data saved on the USB flash drive or memory card cannot be printed.
For safety reasons, we recommend storing the scanned data saved on a memory card or USB
flash drive to another media periodically to avoid unexpected accidents.
We assume no responsibility for damage or loss of data for whatever reasons even within the
warranty period
1.
Make sure that the machine is turned on.
2.
Select
Scan on the HOME screen, then press the
OK
button.
The screen for selecting to which you save the data is displayed.
3.
Insert the USB flash drive in the Direct Print Port or the memory card in the Card
Slot.
Note
For information on the types of the memory card compatible with the machine, refer to Printing
from a Memory Card
.
4.
Select USB flash drive or Memory card, then press the
OK
button.
5.
Select Save to USB flash if you selected USB flash drive in step 4, or Save to
memory card if you selected Memory card, then press the
OK
button.
The Scan document screen is displayed.
6.
Specify the necessary settings, then press the
OK
button.
Setting Items
Page 360 of 758 pagesSaving Scanned Data on the USB Flash Drive/Memory Card Using the Ope...