Operation Manual

Note
If you scan without preview, the show-through prevention function will be active. This function is
useful when scanning magazines. However, when scanning photos, the color tone of the
scanned image may differ from the source due to the show-through prevention function. In that
case, use preview first.
5.
Set Output Settings.
Output Settings
6.
Adjust the cropping frame, correct image and adjust colors as required.
Note
See the corresponding sections below for details on Image Settings and the Color Adjustment
Buttons.
Image Settings
Color Adjustment Buttons
See "
A
djusting Cropping Frames
" for details on cropping frames.
7.
Click Scan.
Scanning starts.
Note
ScanGear's response after scanning can be specified in Status of ScanGear dialog after
scanning on the Scan tab of the Preferences dialog box.
Scan Tab
Note
See "
A
dvanced Mode Tab
" for details on the Advanced Mode tab.
Page top
Page 515 of 758 pagesScanning in Advanced Mode