Operation Manual

A
dvanced Guide
> Maintenance >
Cleaning Your Machine
> Cleaning the Inside of the Machine (Bottom Plate Cleaning)
Cleaning the Inside of the Machine (Bottom Plate Cleaning)
This section explains how to clean the inside of the machine. If the inside of the machine becomes dirty,
printed paper may get dirty, so we recommend performing cleaning regularly.
1.
Make sure that the machine is turned on.
2.
Remove any paper from the Rear Tray.
3.
Open the Paper Output Tray.
Put your finger in the center of the top of the Paper Output Tray and open it gently.
4.
Open the Output Tray Extension.
5.
Fold a single sheet of A4 or Letter-sized plain paper in half widthwise, then unfold the
paper.
6.
Load this and only this sheet of paper on the Rear Tray with the open side facing to
the front.
(A) Load the paper after unfolding it.
7.
Select
Settings on the HOME screen, then press the
OK
button.
The Settings screen is displayed.
8.
Select Maintenance, then press the
OK
button.
The Maintenance screen is displayed.
9.
Select Bottom plate cleaning, then press the
OK
button.
The confirmation screen is displayed.
10.
Select Yes, then press the
OK
button.
The paper cleans the inside of the machine as it feeds through the machine.
Check the folded part of the ejected paper. If it is smudged with ink, perform Bottom Plate Cleaning
again.
If the
p
roblem is not resolved after
p
erformin
g
cleanin
g
a
g
ain, the
p
rotrusions inside the machine
Page 594 of 758 pagesCleaning the Inside of the Machine (Bottom Plate Cleaning)