Operation Manual

Print settings
A
dvanced settings
Mobile phone print setting
Bluetooth settings
PictBridge print settings
Language selection
Reset setting
Plain paper feed settings
Specifies the paper source for A4, Letter, A5, and B5 plain paper.
Note
A
4, Letter, A5, and B5 paper can be loaded in the Cassette. Load on the Rear Tray for the
other sizes of paper.
Print settings
Prevent paper abrasion
Use this setting only if the print surface becomes smudged.
Important
Be sure to set this back to OFF after printing since it may result in lower printing speed or
lower print quality.
Extended copy amount
Selects the amount of image that extends off the paper when printing in Borderless (full).
Important
This setting can be applied only when copy or easy photo reprint mode is selected.
Note
If printouts contain margins even though you are printing in Borderless, specifying Large
for this setting may help solve the problem.
Advanced settings
Date display
Changes the display format of shooting dates when printed.
Note
When Date ON is selected on the advanced print settings screen in memory card mode,
the shooting date is printed in the date display format you selected. For print settings,
see
Setting Items
.
The shooting date format is as specified in the DPOF setting from DPOF printing.
Read/write attribute
Selects whether to allow data to be written onto memory cards from a computer.
Important
Remove the memory card before changing this setting. For details, see
Setting Up the
Card Slot as the Memory Card Drive of the Computer
.
If you set this setting to Writable from PC, card direct printing cannot be done. After you
finish operation of the memory card dedicated drive, be sure to set it back to Not writable
from PC.
Slide show setting
Specifies the image display quality of the slide show.
Note
Page 639 of 758 pagesChanging the Machine Settings on the LCD