Getting Started Guide

9
4
5
3
Hardware Setup
Install the Ink Tanks
Tilt the ink tank, then insert it under the label and
against the back end of the slot.
Press the PUSH mark on the ink tank rmly until
it clicks.
Install all the other ink tanks in the same way.
When the installation is completed properly, the Ink
lamp lights red.
Install in a well-lit environment.•
Once you have installed the ink tanks, do not remove them
unnecessarily.
•
Make sure all the Ink lamps light red.
Install all the ink tanks.
Make sure that the color of the label matches the ink
tank.