Getting Started Guide

10
7
6
F
D
E
Hardware Setup
Install the Ink Tanks
If an error message is displayed on the LCD, make sure that the Print Head and the ink tanks are correctly installed.•
Lift the Scanning Unit (Cover) (D) slightly, then gently close it. Load a sheet of A4 or Letter-sized plain paper into the
Cassette (F), then press the OK button.
Wait until the LCD changes as shown in the illustration (about 3 minutes) and go to the next step.•
The machine may make some operating noises when preparing to print. This is normal operation.•
For details, refer to "Loading Paper" on page 42.•
Close the Paper Output Tray (E).